| Commit message (Collapse) | Author | Files | Lines |
|---|
|
When port is connected and then disconnected, the state stays as
configured. Which is incorrect as the port is no longer configured,
but in a not attached state.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/1664997235-18198-1-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ACPI driver needs to resume the interface by calling
ucsi_resume(). Otherwise we may fail to detect connections
and disconnections that happen while the system is
suspended.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210425
Fixes: a94ecde41f7e ("usb: typec: ucsi: ccg: enable runtime pm support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221007100951.43798-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Checking the connection status of every port on resume. This
fixes an issue where the partner device is not unregistered
properly after resume if it was unplugged while the system
was suspended.
The function ucsi_check_connection() is also modified so
that it can be used also for registering the connection on
top of unregistering it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210425
Fixes: a94ecde41f7e ("usb: typec: ucsi: ccg: enable runtime pm support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221007100951.43798-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets"),
the gadget devices are proper driver core devices, which caused each
device to request pinmux settings:
aspeed_vhub 1e6a0000.usb-vhub: Initialized virtual hub in USB2 mode
aspeed-g5-pinctrl 1e6e2080.pinctrl: pin A7 already requested by 1e6a0000.usb-vhub; cannot claim for gadget.0
aspeed-g5-pinctrl 1e6e2080.pinctrl: pin-232 (gadget.0) status -22
aspeed-g5-pinctrl 1e6e2080.pinctrl: could not request pin 232 (A7) from group USB2AD on device aspeed-g5-pinctrl
g_mass_storage gadget.0: Error applying setting, reverse things back
The vhub driver has already claimed the pins, so prevent the gadgets
from requesting them too by setting the magic of_node_reused flag. This
causes the driver core to skip the mux request.
Reported-by: Zev Weiss <zev@bewilderbeest.net>
Reported-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Fixes: fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")
Cc: stable@vger.kernel.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Zev Weiss <zev@bewilderbeest.net>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Link: https://lore.kernel.org/r/20221017053006.358520-1-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In uvc_video_encode_isoc_sg, the uvc_request's sg list is
incorrectly being populated leading to corrupt video being
received by the remote end. When building the sg list the
usage of buf->sg's 'dma_length' field is not correct and
instead its 'length' field should be used.
Fixes: e81e7f9a0eb9 ("usb: gadget: uvc: add scatter gather support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeff Vanhoof <qjv001@motorola.com>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20221018215044.765044-5-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If there is a transmission error the buffer will be returned too early,
causing a memory fault as subsequent requests for that buffer are still
queued up to be sent. Refactor the error handling to wait for the final
request to come in before reporting back the buffer to userspace for all
transfer types (bulk/isoc/isoc_sg). This ensures userspace knows if the
frame was successfully sent.
Fixes: e81e7f9a0eb9 ("usb: gadget: uvc: add scatter gather support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20221018215044.765044-4-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With the re-use of the previous completion status in 0d1c407b1a749
("usb: dwc3: gadget: Return proper request status") it could be possible
that the next frame would also get dropped if the current frame has a
missed isoc error. Ensure that an interrupt is requested for the start
of a new frame.
Fixes: fc78941d8169 ("usb: gadget: uvc: decrease the interrupt load to a quarter")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20221018215044.765044-2-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The gadget driver may wait on the request completion when it sets the
USB_GADGET_DELAYED_STATUS. Make sure that the End Transfer command can
go through if the dwc->delayed_status is set so that the request can
complete. When the delayed_status is set, the Setup packet is already
processed, and the next phase should be either Data or Status. It's
unlikely that the host would cancel the control transfer and send a new
Setup packet during End Transfer command. But if that's the case, we can
try again when ep0state returns to EP0_SETUP_PHASE.
Fixes: e1ee843488d5 ("usb: dwc3: gadget: Force sending delayed status during soft disconnect")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3f9f59e5d74efcbaee444cf4b30ef639cc7b124e.1666146954.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the extcon device exists, get the mode from the extcon device. If
the controller is DRD and the driver is unable to determine the mode,
only then default the dr_mode to USB_DR_MODE_PERIPHERAL.
Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 7a84e7353e23 ("Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"")
Cc: stable <stable@kernel.org>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20221017233510.53336-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Al Cooper is no longer the internal broadcom maintainer for broadcom
USB. I will be taking his place as the internal maintainer and as an
additional upstream maintainer.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/1665167529-9840-1-git-send-email-justinpopo6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Felipe has done a wonderful job over the years, but now it makes sense
to just maintain all of the USB stack in one tree. Do so by removing
the current USB gadget and phy entries so that all portions of the stack
are now covered by the main USB maintainer entry.
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/20220930114041.1306711-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
This reverts commit 78e5a3399421 ("cpumask: fix checking valid cpu range").
syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit 78e5a3399421 ("cpumask: fix checking
valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE()
when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.
Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately. As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].
Andrew Jones proposed a fix for x86 and riscv architectures [4]. But
[2] and [5] indicate that affected locations are not limited to arch
code. More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.
We should have inspected and fixed basically all cpumask users before
applying that patch. We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.
Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1]
Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2]
Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3]
Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com [4]
Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5]
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When building with a RISC-V kernel with DWARF5 debug info using clang
and the GNU assembler, several instances of the following error appear:
/tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported
Dumping the .s file reveals these .uleb128 directives come from
.debug_loc and .debug_ranges:
.Ldebug_loc0:
.byte 4 # DW_LLE_offset_pair
.uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp1-.Lfunc_begin0 # ending offset
.byte 1 # Loc expr size
.byte 90 # DW_OP_reg10
.byte 0 # DW_LLE_end_of_list
.Ldebug_ranges0:
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp6-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp27-.Lfunc_begin0 # ending offset
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp28-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp30-.Lfunc_begin0 # ending offset
.byte 0 # DW_RLE_end_of_list
There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.
To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
Link: https://github.com/ClangBuiltLinux/linux/issues/1719
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit f110e5a250e3 ("kbuild: refactor single builds of *.ko") was wrong.
KBUILD_MODULES _is_ needed for single builds.
Otherwise, "make foo/bar/baz/" does not build module objects at all.
Fixes: f110e5a250e3 ("kbuild: refactor single builds of *.ko")
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: David Sterba <dsterba@suse.com>
|
|
After commit d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than
order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2)
requests to buddy like SLUB does.
SLAB has been using kmalloc caches to allocate freelist_idx_t array for
off slab caches. But after the commit, freelist_size can be bigger than
KMALLOC_MAX_CACHE_SIZE.
Instead of using pointer to kmalloc cache, use kmalloc_node() and only
check if the kmalloc cache is off slab during calculate_slab_order().
If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens
as it allocates freelist_idx_t array directly from buddy.
Link: https://lore.kernel.org/all/20221014205818.GA1428667@roeck-us.net/
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Change notification is a commonly supported feature by most servers,
but the current ioctl to request notification when a directory is
changed does not return the information about what changed
(even though it is returned by the server in the SMB3 change
notify response), it simply returns when there is a change.
This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify
information structure which includes the name of the file(s) that
changed and why. See MS-SMB2 2.2.35 for details on the individual
filter flags and the file_notify_information structure returned.
To use this simply pass in the following (with enough space
to fit at least one file_notify_information structure)
struct __attribute__((__packed__)) smb3_notify {
uint32_t completion_filter;
bool watch_tree;
uint32_t data_len;
uint8_t data[];
} __packed;
using CIFS_IOC_NOTIFY_INFO 0xc009cf0b
or equivalently _IOWR(CIFS_IOCTL_MAGIC, 11, struct smb3_notify_info)
The ioctl will block until the server detects a change to that
directory or its subdirectories (if watch_tree is set).
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized
in smb1 mounts. It is cleaner to set lease key to zero in these
places where leases are not supported (smb1 can not return lease keys
so the field was uninitialized).
Addresses-Coverity: 1514207 ("Uninitialized scalar variable")
Addresses-Coverity: 1514331 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It is cleaner to set lease key to zero in the places where leases are not
supported (smb1 can not return lease keys so the field was uninitialized).
Addresses-Coverity: 1513994 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity spotted that we were not initalizing Stbz1 and Stbz2 to
zero in create_sd_buf.
Addresses-Coverity: 1513848 ("Uninitialized scalar variable")
Cc: <stable@vger.kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The crash occurred because we were calling memzero_explicit() on an
already freed sess_data::iov[1] (ntlmsspblob) in sess_free_buffer().
Fix this by not calling memzero_explicit() on sess_data::iov[1] as
it's already by handled by callers.
Fixes: a4e430c8c8ba ("cifs: replace kfree() with kfree_sensitive() for sensitive data")
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
To pick up the changes in:
b8d1d163604bd1e6 ("x86/apic: Don't disable x2APIC if locked")
ca5b7c0d9621702e ("perf/x86/amd/lbr: Add LbrExtV2 branch record support")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2022-10-14 18:06:34.294561729 -0300
+++ after 2022-10-14 18:06:41.285744044 -0300
@@ -264,6 +264,7 @@
[0xc0000102 - x86_64_specific_MSRs_offset] = "KERNEL_GS_BASE",
[0xc0000103 - x86_64_specific_MSRs_offset] = "TSC_AUX",
[0xc0000104 - x86_64_specific_MSRs_offset] = "AMD64_TSC_RATIO",
+ [0xc000010e - x86_64_specific_MSRs_offset] = "AMD64_LBR_SELECT",
[0xc000010f - x86_64_specific_MSRs_offset] = "AMD_DBG_EXTN_CFG",
[0xc0000300 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS",
[0xc0000301 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_CTL",
$
Now one can trace systemwide asking to see backtraces to where that MSR
is being read/written, see this example with a previous update:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
^C#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
Using CPUID AuthenticAMD-25-21-0
0x6a0
0x6a8
New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
0x6a0
0x6a8
New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/lkml/Y0nQkz2TUJxwfXJd@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support for using 'perf report --dump-raw-trace' to parse PTT packet.
Example usage:
Output will contain raw PTT data and its textual representation, such
as (8DW format):
0 0 0x5810 [0x30]: PERF_RECORD_AUXTRACE size: 0x400000 offset: 0
ref: 0xa5d50c725 idx: 0 tid: -1 cpu: 0
.
. ... HISI PTT data: size 4194304 bytes
. 00000000: 00 00 00 00 Prefix
. 00000004: 08 20 00 60 Header DW0
. 00000008: ff 02 00 01 Header DW1
. 0000000c: 20 08 00 00 Header DW2
. 00000010: 10 e7 44 ab Header DW3
. 00000014: 2a a8 1e 01 Time
. 00000020: 00 00 00 00 Prefix
. 00000024: 01 00 00 60 Header DW0
. 00000028: 0f 1e 00 01 Header DW1
. 0000002c: 04 00 00 00 Header DW2
. 00000030: 40 00 81 02 Header DW3
. 00000034: ee 02 00 00 Time
....
This patch only add basic parsing support according to the definition of
the PTT packet described in Documentation/trace/hisi-ptt.rst. And the
fields of each packet can be further decoded following the PCIe Spec's
definition of TLP packet.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi6124@gmail.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zeng Prime <prime.zeng@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20220927081400.14364-4-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
HiSilicon PCIe tune and trace device (PTT) could dynamically tune the
PCIe link's events, and trace the TLP headers).
This patch add support for PTT device in perf tool, so users could use
'perf record' to get TLP headers trace data.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi6124@gmail.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zeng Prime <prime.zeng@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20220927081400.14364-3-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add find_pmu_for_event() and use to simplify logic in
auxtrace_record_init(). find_pmu_for_event() will be reused in
subsequent patches.
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi6124@gmail.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zeng Prime <prime.zeng@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20220927081400.14364-2-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Testcase stat+json_output.sh fails in powerpc:
86: perf stat JSON output linter : FAILED!
The testcase "stat+json_output.sh" verifies perf stat JSON output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes: 0c343af2a2f82844 ("perf test: JSON format checking")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221006155149.67205-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Testcase stat+csv_output.sh fails in powerpc:
84: perf stat CSV output linter: FAILED!
The testcase "stat+csv_output.sh" verifies perf stat CSV output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes: 7473ee56dbc91c98 ("perf test: Add checking for perf stat CSV output.")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221006155149.67205-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
User space tasks can migrate between CPUs, so when tracing selected CPUs,
system-wide sideband is still needed, however evlist->core.has_user_cpus
is not set in the hybrid case, so check the target cpu_list instead.
Fixes: 7d189cadbeebc778 ("perf intel-pt: Track sideband system-wide when needed")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221012082259.22394-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
uClibc segfaulted because NULL was passed as the format to fprintf().
That happened because one of the format strings was missing and
intel_pt_print_info() didn't check that before calling fprintf().
Add the missing format string, and check format is not NULL before calling
fprintf().
Fixes: 11fa7cb86b56d361 ("perf tools: Pass Intel PT information for decoding MTC and CYC")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221012082259.22394-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since PERF_FORMAT_LOST was added, the default read format has that bit
set, so add it to the tests. Keep the old value as well so that the test
still passes on older kernels.
This fixes the following failure:
expected read_format=0|4, got 20
FAILED './tests/attr/test-record-C0' - match failure
Fixes: 85b425f31c8866e0 ("perf record: Set PERF_FORMAT_LOST by default")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221012094633.21669-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add tests:
Test with MTC and TSC disabled
Test with branches disabled
Test with/without CYC
Test recording with sample mode
Test with kernel trace
Test virtual LBR
Test power events
Test with TNT packets disabled
Test with event_trace
These tests mostly check that perf record works with the corresponding
Intel PT config terms, sometimes also checking that certain packets do or
do not appear in the resulting trace as appropriate.
The "Test virtual LBR" is slightly trickier, using a Python script to
check that branch stacks are actually synthesized.
Signed-off-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-8-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When a program header was added, it moved the text section but
GEN_ELF_TEXT_OFFSET was not updated.
Fix by adding the program header size and aligning.
Fixes: babd04386b1df8c3 ("perf jit: Include program header in ELF files")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lieven Hey <lieven.hey@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test for decoding self-modifying code using a jitdump file.
The test creates a workload that uses self-modifying code and generates its
own jitdump file. The result is processed with perf inject --jit and
checked for decoding errors.
Note the test will fail without patch "perf inject: Fix GEN_ELF_TEXT_OFFSET
for jit" applied.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Tidy alignment of test function lines to make them more readable.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Messages display with the perf test -v option. Add a message to show when
skipping a test because the user cannot do kernel tracing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When not decoding, the options "-B -N --no-bpf-event" speed up perf record.
Make a common function for them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
count_result() does not always reset ret=0 which means the value can spill
into the next test result.
Fix by explicitly setting it to zero between tests.
Committer testing:
# perf test "Miscellaneous Intel PT testing"
110: Miscellaneous Intel PT testing : Ok
#
Tested as well with:
# perf test -v "Miscellaneous Intel PT testing"
Fixes: fd9b45e39cfaf885 ("perf test: test_intel_pt.sh: Fix return checking")
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 8c193f4714df ("pwm: tegra: Optimize period calculation") updated
the period calculation in the Tegra PWM driver and now returns an error
if the period requested is less than minimum period supported. This is
breaking PWM support on various Tegra platforms. For example, on the
Tegra210 Jetson Nano platform this is breaking the PWM fan support and
probing the PWM fan driver now fails ...
pwm-fan pwm-fan: Failed to configure PWM: -22
pwm-fan: probe of pwm-fan failed with error -22
The problem is that the default parent clock for the PWM on Tegra210 is
a 32kHz clock and is unable to support the requested PWM period.
Fix PWM support on Tegra20, Tegra30, Tegra114, Tegra124 and Tegra210 by
updating the parent clock for the PWM to be the PLL_P.
Fixes: 8c193f4714df ("pwm: tegra: Optimize period calculation")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # TF101 T20
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # TF101 T20
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # TF201 T30
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # TF700T T3
Link: https://lore.kernel.org/r/20221010100046.6477-1-jonathanh@nvidia.com
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
There is an issue when build with older versions of binutils 2.27.0,
arch/arm/mach-at91/pm_suspend.S: Assembler messages:
arch/arm/mach-at91/pm_suspend.S:1086: Error: garbage following instruction -- `ldr tmp1,=0x00020010UL'
Use UL() macro to fix the issue in assembly file.
Fixes: 4fd36e458392 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20221012030635.13140-1-wangkefeng.wang@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
These two clocks are now registered in the device tree as fixed clocks,
causing a regression in the driver as the clock already exists with
e.g. the name "pxo_board" as the MSM8660 GCC driver probes.
Fix this by just not hard-coding this anymore and everything works
like a charm.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: baecbda52933 ("ARM: dts: qcom: msm8660: fix node names for fixed clocks")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221013140745.7801-1-linus.walleij@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Since commit 262ca38f4b6e ("clk: Stop forwarding clk_rate_requests
to the parent"), the clk_rate_request is .. as the title says, not
forwarded anymore to the parent: this produces an issue with the
MediaTek clock MUX driver during GPU DVFS on MT8195, but not on
MT8192 or others.
This is because, differently from others, like MT8192 where all of
the clocks in the MFG parents tree are of mtk_mux type, but in the
parent tree of MT8195's MFG clock, we have one mtk_mux clock and
one (clk framework generic) mux clock, like so:
names: mfg_bg3d -> mfg_ck_fast_ref -> top_mfg_core_tmp (or) mfgpll
types: mtk_gate -> mux -> mtk_mux (or) mtk_pll
To solve this issue and also keep the GPU DVFS clocks code working
as expected, wire up a .determine_rate() callback for the mtk_mux
ops; for that, the standard clk_mux_determine_rate_flags() was used
as it was possible to.
This commit was successfully tested on MT6795 Xperia M5, MT8173 Elm,
MT8192 Spherion and MT8195 Tomato; no regressions were seen.
For the sake of some more documentation about this issue here's the
trace of it:
[ 12.211587] ------------[ cut here ]------------
[ 12.211589] WARNING: CPU: 6 PID: 78 at drivers/clk/clk.c:1462 clk_core_init_rate_req+0x84/0x90
[ 12.211593] Modules linked in: stp crct10dif_ce mtk_adsp_common llc rfkill snd_sof_xtensa_dsp
panfrost(+) sbs_battery cros_ec_lid_angle cros_ec_sensors snd_sof_of
cros_ec_sensors_core hid_multitouch cros_usbpd_logger snd_sof gpu_sched
snd_sof_utils fuse ipv6
[ 12.211614] CPU: 6 PID: 78 Comm: kworker/u16:2 Tainted: G W 6.0.0-next-20221011+ #58
[ 12.211616] Hardware name: Acer Tomato (rev2) board (DT)
[ 12.211617] Workqueue: devfreq_wq devfreq_monitor
[ 12.211620] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 12.211622] pc : clk_core_init_rate_req+0x84/0x90
[ 12.211625] lr : clk_core_forward_rate_req+0xa4/0xe4
[ 12.211627] sp : ffff80000893b8e0
[ 12.211628] x29: ffff80000893b8e0 x28: ffffdddf92f9b000 x27: ffff46a2c0e8bc05
[ 12.211632] x26: ffff46a2c1041200 x25: 0000000000000000 x24: 00000000173eed80
[ 12.211636] x23: ffff80000893b9c0 x22: ffff80000893b940 x21: 0000000000000000
[ 12.211641] x20: ffff46a2c1039f00 x19: ffff46a2c1039f00 x18: 0000000000000000
[ 12.211645] x17: 0000000000000038 x16: 000000000000d904 x15: 0000000000000003
[ 12.211649] x14: ffffdddf9357ce48 x13: ffffdddf935e71c8 x12: 000000000004803c
[ 12.211653] x11: 00000000a867d7ad x10: 00000000a867d7ad x9 : ffffdddf90c28df4
[ 12.211657] x8 : ffffdddf9357a980 x7 : 0000000000000000 x6 : 0000000000000004
[ 12.211661] x5 : ffffffffffffffc8 x4 : 00000000173eed80 x3 : ffff80000893b940
[ 12.211665] x2 : 00000000173eed80 x1 : ffff80000893b940 x0 : 0000000000000000
[ 12.211669] Call trace:
[ 12.211670] clk_core_init_rate_req+0x84/0x90
[ 12.211673] clk_core_round_rate_nolock+0xe8/0x10c
[ 12.211675] clk_mux_determine_rate_flags+0x174/0x1f0
[ 12.211677] clk_mux_determine_rate+0x1c/0x30
[ 12.211680] clk_core_determine_round_nolock+0x74/0x130
[ 12.211682] clk_core_round_rate_nolock+0x58/0x10c
[ 12.211684] clk_core_round_rate_nolock+0xf4/0x10c
[ 12.211686] clk_core_set_rate_nolock+0x194/0x2ac
[ 12.211688] clk_set_rate+0x40/0x94
[ 12.211691] _opp_config_clk_single+0x38/0xa0
[ 12.211693] _set_opp+0x1b0/0x500
[ 12.211695] dev_pm_opp_set_rate+0x120/0x290
[ 12.211697] panfrost_devfreq_target+0x3c/0x50 [panfrost]
[ 12.211705] devfreq_set_target+0x8c/0x2d0
[ 12.211707] devfreq_update_target+0xcc/0xf4
[ 12.211708] devfreq_monitor+0x40/0x1d0
[ 12.211710] process_one_work+0x294/0x664
[ 12.211712] worker_thread+0x7c/0x45c
[ 12.211713] kthread+0x104/0x110
[ 12.211716] ret_from_fork+0x10/0x20
[ 12.211718] irq event stamp: 7102
[ 12.211719] hardirqs last enabled at (7101): [<ffffdddf904ea5a0>] finish_task_switch.isra.0+0xec/0x2f0
[ 12.211723] hardirqs last disabled at (7102): [<ffffdddf91794b74>] el1_dbg+0x24/0x90
[ 12.211726] softirqs last enabled at (6716): [<ffffdddf90410be4>] __do_softirq+0x414/0x588
[ 12.211728] softirqs last disabled at (6507): [<ffffdddf904171d8>] ____do_softirq+0x18/0x24
[ 12.211730] ---[ end trace 0000000000000000 ]---
Fixes: 262ca38f4b6e ("clk: Stop forwarding clk_rate_requests to the parent")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221011135548.318323-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
When debugging LLVM IR, it can be handy for clang to not discard value
names used for local variables and parameters. Compare the generated IR.
-fdiscard-value-names:
define i32 @core_sys_select(i32 %0, ptr %1, ptr %2, ptr %3, ptr %4) {
%6 = alloca i64
%7 = alloca %struct.poll_wqueues
%8 = alloca [64 x i32]
-fno-discard-value-names:
define i32 @core_sys_select(i32 %n, ptr %inp, ptr %outp, ptr %exp,
ptr %end_time) {
%expire.i = alloca i64
%table.i = alloca %struct.poll_wqueues
%stack_fds = alloca [64 x i32]
The rule for generating human readable LLVM IR (.ll) is only useful as a
debugging feature:
$ make LLVM=1 fs/select.ll
As Fangrui notes:
A LLVM_ENABLE_ASSERTIONS=off build of Clang defaults to
-fdiscard-value-names.
A LLVM_ENABLE_ASSERTIONS=on build of Clang defaults to
-fno-discard-value-names.
Explicitly enable -fno-discard-value-names so that the IR always contains
value names regardless of whether assertions were enabled or not.
Assertions generally are not enabled in releases of clang packaged by
distributions.
Link: https://github.com/ClangBuiltLinux/linux/issues/1467
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This reverts commit e96e27fc6f7971380283768e9a734af16b1716ee.
Jonathan reported that this commit broke this topology, where all the space
available on bus 02 was assigned to the 02:00.0 bridge window, leaving none
for the e1000 device at 02:00.1:
pci 0000:00:04.0: bridge window [mem 0x10200000-0x103fffff] to [bus 02-04]
pci 0000:02:00.0: bridge window [mem 0x10200000-0x103fffff] to [bus 03-04]
pci 0000:02:00.1: BAR 0: failed to assign [mem size 0x00020000]
e1000 0000:02:00.1: can't ioremap BAR 0: [??? 0x00000000 flags 0x0]
Link: https://lore.kernel.org/r/20221014124553.0000696f@huawei.com
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
After commit 8799c0be89eb ("drm/amd/display: Fix vblank refcount in vrr
transition"), a build with CONFIG_DEBUG_FS=n is broken due to a
misplaced brace, along the lines of:
In file included from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_trace.h:39,
from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:41:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: At top level:
./include/drm/drm_atomic.h:864:9: error: expected identifier or ‘(’ before ‘for’
864 | for ((__i) = 0; \
| ^~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8317:9: note: in expansion of macro ‘for_each_new_crtc_in_state’
8317 | for_each_new_crtc_in_state(state, crtc, new_crtc_state, j)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Move the brace within the #ifdef so that the file can be built with or
without CONFIG_DEBUG_FS.
Fixes: 8799c0be89eb ("drm/amd/display: Fix vblank refcount in vrr transition")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are several spelling mistakes in kernel error messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Remove unnecessary NULL check of oparam->cifs_sb when parsing symlink
error response as it's already set by all smb2_open_file() callers and
deferenced earlier.
This fixes below report:
fs/cifs/smb2file.c:126 smb2_open_file()
warn: variable dereferenced before check 'oparms->cifs_sb' (see line 112)
Link: https://lore.kernel.org/r/Y0kt42j2tdpYakRu@kili
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If the kernel exposes a new perf_event_attr field in a format attr, perf
will return an error stating the specified PMU can't be found. For
example, a format attr with 'config3:0-63' causes an error as config3 is
unknown to perf. This causes a compatibility issue between a newer
kernel with older perf tool.
Before this change with a kernel adding 'config3' I get:
$ perf record -e arm_spe// -- true
event syntax error: 'arm_spe//'
\___ Cannot find PMU `arm_spe'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list
available events
After this change, I get:
$ perf record -e arm_spe// -- true
WARNING: 'arm_spe_0' format 'inv_event_filter' requires 'perf_event_attr::config3' which is not supported by this version of perf!
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.091 MB perf.data ]
To support unknown configN formats, rework the YACC implementation to
pass any config[0-9]+ format to perf_pmu__new_format() to handle with a
warning.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220914-arm-perf-tool-spe1-2-v2-v4-1-83c098e6212e@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
$ perf list metricgroups
gives
List of pre-defined events (to be used in -e):
Metric Groups:
Backend
Bad
BadSpec
But that's incorrect of course because metric groups or metrics can only
be specified with -M. So fix the message to say -e or -M
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221004192634.998984-1-ak@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -C/--cpu option was maily for report but it also affected record as
it ate the option. So users needed to use "--" after perf mem record to
pass the info to the perf record properly.
Check if this option is set for record, and pass it to the actual perf
record.
Before)
$ sudo perf --debug perf-event-open mem record -C 0 2>&1 | grep -a sys_perf_event_open
...
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 4
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 8
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11
...
After)
$ sudo perf --debug perf-event-open mem record -C 0 2>&1 | grep -a sys_perf_event_open
...
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 4
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221004200211.1444521-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
