summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip/Makefile (follow)
Commit message (Collapse)AuthorAgeFilesLines
* irqchip/irq-mvebu-icu: Add new driver for Marvell ICUThomas Petazzoni2017-06-231-0/+1
| | | | | | | | | | | | | | | | | | The Marvell ICU unit is found in the CP110 block of the Marvell Armada 7K and 8K SoCs. It collects the wired interrupts of the devices located in the CP110 and turns them into SPI interrupts in the GIC located in the AP806 side of the SoC, by using a memory transaction. Until now, the ICU was configured in a static fashion by the firmware, and Linux was relying on this static configuration. By having Linux configure the ICU, we are more flexible, and we can allocate dynamically the GIC SPI interrupts only for devices that are actually in use. The driver was initially written by Hanna Hawa <hannah@marvell.com>. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/irq-mvebu-gicp: Add new driver for Marvell GICPThomas Petazzoni2017-06-231-0/+1
| | | | | | | | | | | | This commit adds a simple driver for the Marvell GICP, a hardware unit that converts memory writes into GIC SPI interrupts. The driver provides a number of functions to the ICU driver to allocate GICP interrupts, and get the physical addresses that the ICUs should write to to set/clear interrupts. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/aspeed-i2c-ic: Add I2C IRQ controller for AspeedBrendan Higgins2017-06-221-1/+1
| | | | | | | | | The Aspeed 24XX/25XX chips share a single hardware interrupt across 14 separate I2C busses. This adds a dummy irqchip which maps the single hardware interrupt to software interrupts for each of the busses. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip: Add Mediatek mtk-cirq driverYoulin Pei2017-04-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to works outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC. The CIRQ controller is integrated in between MCUSYS( include Cortex-Ax, CCI and GIC ) and interrupt sources as the second level interrupt controller. The external interrupts which outside MCUSYS will feed through CIRQ then bypass to GIC. CIRQ can monitors all edge trigger interupts. When an edge interrupt is triggered, CIRQ can record the status and generate a pulse signal to GIC when flush command executed. When system enters sleep mode, MCUSYS will be turned off to improve power consumption, also GIC is power down. The edge trigger interrupts will be lost in this scenario without CIRQ. This commit provides the CIRQ irqchip implement. Signed-off-by: Youlin Pei <youlin.pei@mediatek.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/faraday: Replace moxa with ftintc010Linus Walleij2017-04-071-1/+0
| | | | | | | | | | | | | | | | | | | | The Moxa Art interrupt controller is very very likely just an instance of the Faraday FTINTC010 interrupt controller from Faraday Technology. An indication would be its close association with the FA526 ARM core and the fact that the register layout is the same. The implementation in irq-moxart.c can probably be right off replaced with the irq-ftintc010.c driver by adding a compatible string, selecting this irqchip from the machine and run. As a bonus we have an irqchip driver supporting high/low and rising/falling edges for the Moxa Art, and shared code with the Gemini platform. Acked-by: Olof Johansson <olof@lixom.net> Tested-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/gemini: Refactor Gemini driver to reflect Faraday originLinus Walleij2017-04-071-1/+1
| | | | | | | | | | | | | | | | | | | | | The Gemini irqchip turns out to be a standard IP component from Faraday Technology named FTINTC010 after some research and new information. - Rename the driver and all symbols to reflect the new information. - Add the new compatible string "faraday,ftintc010" - Create a Kconfig symbol CONFIG_FARADAY_FTINTC010 so that SoCs using this interrupt controller can easily select and reuse it instead of hardwiring it to ARCH_GEMINI I have created a separate patch to select the new Kconfig symbol from the Gemini machine, which will be merged through the ARM SoC tree. Cc: Greentime Hu <green.hu@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip: Add a driver for Cortina GeminiLinus Walleij2017-02-081-0/+1
| | | | | | | | | | | | As a part of transitioning the Gemini platform to device tree we create this clean, device-tree-only irqchip driver. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/qcom: Add IRQ combiner driverAgustin Vega-Frias2017-02-031-0/+1
| | | | | | | | | | | | | | | | Driver for interrupt combiners in the Top-level Control and Status Registers (TCSR) hardware block in Qualcomm Technologies chips. An interrupt combiner in this block combines a set of interrupts by OR'ing the individual interrupt signals into a summary interrupt signal routed to a parent interrupt controller, and provides read- only, 32-bit registers to query the status of individual interrupts. The status bit for IRQ n is bit (n % 32) within register (n / 32) of the given combiner. Thus, each combiner can be described as a set of register offsets and the number of IRQs managed. Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* microblaze/irqchip: Move intc driver to irqchipZubair Lutfullah Kakakhel2016-11-291-0/+1
| | | | | | | | | | | | The Xilinx AXI Interrupt Controller IP block is used by the MIPS based xilfpga platform and a few PowerPC based platforms. Move the interrupt controller code out of arch/microblaze so that it can be used by everyone Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* Merge tag 'armsoc-cleanup' of ↵Linus Torvalds2016-10-081-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "The cleanups for v4.9 are a little larger that usual, but thankfully that is almost exclusively due to removing a significant number of files that have become obsolete after the still ongoing conversion of old board files to devicetree. - for mach-omap2, which is still the largest platform in arch/arm/, the conversion to DT is finally complete after the Nokia N900 is now fully supported there, along with the omap3 LDP, and we can remove those two board files. If no regressions are found, another large cleanup for the platform will happen as a follow-up, removing dead code and restructuring the platform based on being DT-only. - In mach-imx, similar work is ongoing, but has not come that far. This time, we remove the obsolete board file for the i.MX1 generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only. The remaining board files are for i.MX2 and i.MX3 machines based on old ARM926 or ARM1136 cores that should work with DT in principle. - realview has just been converted from board files to DT, and a lot of code gets removed in the process. This is the last ARM/Keil/Versatile derived platform that was still using board files, the other ones being integrator, versatile and vexpress. We can probably merge the remaining code into a single directory in the near future. - clps711x had completed the conversion in v4.8, but we accidentally left the files in place that should have been deleted then" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly ARM: imx: (trivial) fix typo and grammar ARM: clps711x: remove extraneous files ARM: imx: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module ARM: imx: remove platform-mxc_rnga ARM: realview: imply device tree boot ARM: realview: no need to select SMP_ON_UP explicitly ARM: realview: delete the RealView board files ARM: imx: no need to select SMP_ON_UP explicitly ARM: i.MX: Move SOC_IMX1 into 'Device tree only' ARM: i.MX: Remove i.MX1 non-DT support ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support ARM: mxs: remove obsolete startup code for TX28 ARM: i.MX31 iomux: remove duplicates with alternate name ARM: i.MX31 iomux: remove plain duplicates ARM: OMAP2+: Drop legacy board file for LDP ...
| * ARM: realview: imply device tree bootLinus Walleij2016-08-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reduces the Kconfig for the RealView by assuming we are always booting from the device tree, and removing all the uses of CONFIG_REALVIEW_DT and replacing with CONFIG_ARCH_REALVIEW. Further: - Drop REALVIEW_HIGH_PHYS_OFFSET: we don't use this with device tree. - Drop the REALVIEW_EB_ARM11MP_REVB option: we now handle this by simply using another device tree. - Drop the PB1176 secure flash option: this is defined in the PB1176 device tree but marked as "disabled", so users who want to use it can simply enable it in the device tree and go hacking around. Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge tag 'irqchip-core-4.9' of git://git.infradead.org/users/jcooper/linux ↵Thomas Gleixner2016-09-221-0/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | into irq/core Pull irqchip core changes for v4.9 from Jason Cooper - jcore: Add AIC driver - mips-gic: Use for_each_set_bit - mvebu: Add PIC driver
| * \ Merge branch 'irqchip/mvebu64' into irqchip/coreJason Cooper2016-08-231-0/+1
| |\ \
| | * | irqchip/mvebu-pic: New driver for Marvell Armada 7K/8K PICThomas Petazzoni2016-08-231-0/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Marvell Armada 7K/8K integrates a secondary interrupt controller very originally named "PIC". It is connected to the main GIC via a PPI. Amongst other things, this PIC is used for the ARM PMU. This commit adds a simple irqchip driver for this interrupt controller. Since this interrupt controller is not needed early at boot time, we make the driver a proper platform driver rather than use the IRQCHIP_DECLARE() mechanism. Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1470408921-447-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * / irqchip/jcore-aic: Add J-Core AIC driverRich Felker2016-08-081-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two versions of the J-Core interrupt controller in use, aic1 which generates interrupts with programmable priorities, but only supports 8 irq lines and maps them to cpu traps in the range 17 to 24, and aic2 which uses traps in the range 64-127 and supports up to 128 irqs, with priorities dependent on the interrupt number. The Linux driver does not make use of priorities anyway. For simplicity, there is no aic1-specific logic in the driver beyond setting the priority register, which is necessary for interrupts to work at all. Eventually aic1 will likely be phased out, but it's currently in use in deployments and all released bitstream binaries. Signed-off-by: Rich Felker <dalias@libc.org> Link: https://lkml.kernel.org/r/c3b89ef74aaa6477575dbe2d410eb1d182503243.147018b6529.git.dalias@libc.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* / drivers/irqchip: Add STM32 external interrupts supportAlexandre TORGUE2016-09-211-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | The STM32 external interrupt controller consists of edge detectors that generate interrupts requests or wake-up events. Each line can be independently configured as interrupt or wake-up source, and triggers either on rising, falling or both edges. Each line can also be masked independently. Originally-from: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: arnd@arndb.de Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: bruherrera@gmail.com Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: lee.jones@linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1474387259-18926-3-git-send-email-alexandre.torgue@st.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge tag 'irqchip-core-4.8-2' of ↵Thomas Gleixner2016-07-021-0/+1
|\ | | | | | | | | | | | | | | git://git.infradead.org/users/jcooper/linux into irq/core Pull irqchip core changes for v4.8 (second set) from Jason Cooper: - Add Aspeed VIC driver
| * irqchip/aspeed-vic: Add irq controller for AspeedBenjamin Herrenschmidt2016-06-221-0/+1
| | | | | | | | | | | | | | Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lkml.kernel.org/r/1463064193-2178-3-git-send-email-joel@jms.id.au Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | irqchip/gic: Add platform driver for non-root GICs that require RPMJon Hunter2016-06-131-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a platform driver to support non-root GICs that require runtime power-management. Currently, only non-root GICs are supported because the functions, smp_cross_call() and set_handle_irq(), that need to be called for a root controller are located in the __init section and so cannot be called by the platform driver. The GIC platform driver re-uses many functions from the existing GIC driver including some functions to save and restore the GIC context during power transitions. The functions for saving and restoring the GIC context are currently only defined if CONFIG_CPU_PM is enabled and to ensure that these functions are always defined when the platform driver is enabled, a dependency on CONFIG_ARM_GIC_PM (which selects the platform driver) has been added. In order to re-use the private GIC initialisation code, a new public function, gic_of_init_child(), has been added which calls various private functions to initialise the GIC. This is different from the existing gic_of_init() because it only supports non-root GICs (ie. does not call smp_cross_call() is set_handle_irq()) and is not located in the __init section (so can be used by platform drivers). Furthermore, gic_of_init_child() dynamically allocates memory for the GIC chip data which is also different from gic_of_init(). There is no specific suspend handling for GICs registered as platform devices. Non-wakeup interrupts will be disabled by the kernel during late suspend, however, this alone will not power down the GIC if interrupts have been requested and not freed. Therefore, requestors of non-wakeup interrupts will need to free them on entering suspend in order to power-down the GIC. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* Merge tag 'arc-4.7-rc1' of ↵Linus Torvalds2016-05-191-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: "We have a relatively big changeset for ARC for 4.7. The highlight is support for EZChip (now Mellanox) NPS-400 network processor, a 400-Gb throughput C-programmable packet processor based on ARC700 cores from Synopsys. See http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf Also present are irqchip and clocksource drivers for NPS as agreed with respective maintainers to go via ARC tree due to an soc header dependency. I have the needed ACKs from Jason, Marc, Daniel. You might run into a trivial merge conflict in drivers/irqchip/* This EZChip platform support required some deep changes in ARC architecture code and also opportunity to cleanup past sins (legacy irq domains, missing irq domain lookup, hard coded timer irqs...) Summary: - Support for EZChip (now Mellanox) NPS-400 Network processor based on ARC700 - NPS interrupt controller and clocksource drivers - ARC timers probed off DT - ARC iqrchips switching to linear domain (upgrade from legacy domains)" * tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits) arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core arc: axs10x: Add DT bindings for I2S PLL Clock ARC: pae: STRICT_MM_TYPECHECKS was broken ARC: Add eznps platform to Kconfig and Makefile ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE ARC: [plat-eznps] Use dedicated cpu_relax() ARC: [plat-eznps] Use dedicated identity auxiliary register. ARC: [plat-eznps] Use dedicated SMP barriers ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg ARC: [plat-eznps] Use dedicated user stack top ARC: [plat-eznps] Add eznps platform ARC: [plat-eznps] Add eznps board defconfig and dts ARC: Mark secondary cpu online only after all HW setup is done ARC: rwlock: disable interrupts in !LLSC variant ARC: Make vmalloc size configurable ARC: clean out UAPI byteorder.h clean off Kconfig symbol irqchip: add nps Internal and external irqchips clocksource: Add NPS400 timers driver soc: Support for EZchip SoC Documentation: Add EZchip vendor to binding list ...
| * irqchip: add nps Internal and external irqchipsNoam Camus2016-05-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding EZchip NPS400 support. Internal interrupts are handled by Multi Thread Manager (MTM) Once interrupt is serviced MTM is acked for deactivating the interrupt. External interrupts are handled by MTM as well as at Global Interrupt Controller (GIC) e.g. serial and network devices. Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de>
* | irqchip: Add LPC32xx interrupt controller driverVladimir Zapolskiy2016-05-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The change adds improved support of NXP LPC32xx MIC, SIC1 and SIC2 interrupt controllers. This is a list of new features in comparison to the legacy driver: * irq types are taken from device tree settings, no more need to hardcode them, * old driver is based on irq_domain_add_legacy, which causes problems with handling MIC hardware interrupt 0 produced by SIC1, * there is one driver for MIC, SIC1 and SIC2, no more need to handle them separately, e.g. have two separate handlers for SIC1 and SIC2, * the driver does not have any dependencies on hardcoded register offsets, * the driver is much simpler for maintenance, * SPARSE_IRQS option is supported. Legacy LPC32xx interrupt controller driver was broken since commit 76ba59f8366f ("genirq: Add irq_domain-aware core IRQ handler"), which requires a private interrupt handler, otherwise any SIC1 generated interrupt (mapped to MIC hwirq 0) breaks the kernel with the message "unexpected IRQ trap at vector 00". The change disables compilation of a legacy driver found at arch/arm/mach-lpc32xx/irq.c, the file will be removed in a separate commit. Fixes: 76ba59f8366f ("genirq: Add irq_domain-aware core IRQ handler") Tested-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* | irqchip: Add Layerscape SCFG MSI controller supportMinghuan Lian2016-05-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Some kind of Freescale Layerscape SoC provides a MSI implementation which uses two SCFG registers MSIIR and MSIR to support 32 MSI interrupts for each PCIe controller. The patch is to support it. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* | irqchip: Add per-cpu interrupt partitioning libraryMarc Zyngier2016-05-021-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've unfortunately started seeing a situation where percpu interrupts are partitioned in the system: one arbitrary set of CPUs has an interrupt connected to a type of device, while another disjoint set of CPUs has the same interrupt connected to another type of device. This makes it impossible to have a device driver requesting this interrupt using the current percpu-interrupt abstraction, as the same interrupt number is now potentially claimed by at least two drivers, and we forbid interrupt sharing on per-cpu interrupt. A solution to this is to turn things upside down. Let's assume that our system describes all the possible partitions for a given interrupt, and give each of them a unique identifier. It is then possible to create a namespace where the affinity identifier itself is a form of interrupt number. At this point, it becomes easy to implement a set of partitions as a cascaded irqchip, each affinity identifier being the HW irq. This allows us to keep a number of nice properties: - Each partition results in a separate percpu-interrupt (with a restrictied affinity), which keeps drivers happy. - Because the underlying interrupt is still per-cpu, the overhead of the indirection can be kept pretty minimal. - The core code can ignore most of that crap. For that purpose, we implement a small library that deals with some of the boilerplate code, relying on platform-specific drivers to provide a description of the affinity sets and a set of callbacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/1460365075-7316-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip: Add the Alpine MSIX interrupt controllerAntoine Tenart2016-03-091-0/+1
| | | | | | | | | This patch adds the Alpine MSIX interrupt controller driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* Merge tag 'irqchip-core-4.6-2' of ↵Thomas Gleixner2016-02-211-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/jcooper/linux into irq/core Pull the second round of irqchip core changes for v4.6 from Jason Cooper: - mvebu: - Add odmi driver for Marvell 7K/8K SoCs - Replace driver-specific set_affinity with generic version - mips: - Move ath79 MISC and CPU drivers from arch/ code to irqchip/ - tango: - Add support for Sigma Designs SMP8[67]xx ctrl
| * Merge branch 'irqchip/mvebu' into irqchip/coreJason Cooper2016-02-211-0/+1
| |\
| | * irqchip/mvebu-odmi: Add new driver for platform MSI on Marvell 7K/8KThomas Petazzoni2016-02-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commits adds a new irqchip driver that handles the ODMI controller found on Marvell 7K/8K processors. The ODMI controller provide MSI interrupt functionality to on-board peripherals, much like the GIC-v2m. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1455888883-5127-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * | Merge branch 'irqchip/mips' into irqchip/coreJason Cooper2016-02-211-0/+2
| |\ \
| | * | irqchip/ath79-cpu: Move the CPU IRQ driver from arch/mips/ath79/Alban Bedel2016-02-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1453553867-27003-2-git-send-email-albeu@free.fr Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | irqchip/ath79-misc: Move the MISC driver from arch/mips/ath79/Alban Bedel2016-02-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver stays the same but the initialization changes a bit. For OF boards we now get the memory map from the OF node and use a linear mapping instead of the legacy mapping. For legacy boards we still use a legacy mapping and just pass down all the parameters from the board init code. Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1453553867-27003-1-git-send-email-albeu@free.fr Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * | | Merge branch 'irqchip/tango' into irqchip/coreJason Cooper2016-02-211-0/+1
| |\ \ \ | | |_|/ | |/| |
| | * | irqchip/tango: Add support for Sigma Designs SMP86xx/SMP87xx interrupt ↵Mans Rullgard2016-02-181-0/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | controller This adds support for the secondary interrupt controller used in Sigma Designs SMP86xx and SMP87xx chips. Signed-off-by: Mans Rullgard <mans@mansr.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1453313237-18570-2-git-send-email-mans@mansr.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | | Merge tag 'irqchip-core-4.6' of git://git.infradead.org/users/jcooper/linux ↵Thomas Gleixner2016-02-211-1/+1
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into irq/core Pull irqchip core changes for v4.6 from Jason Cooper: - mvebu (armada-370-xp) - MSI support - Deconflict with mvebu's arm64 code - ts4800 - Restrict when ts4800 driver can be built - Make ts4800_ic_ops static const - bcm2836: Drop superfluous memory barrier
| * | irqchip/armada-370-xp: Add Kconfig option for the driverThomas Petazzoni2016-02-161-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of building the irq-armada-370-xp driver directly when CONFIG_ARCH_MVEBU is enabled, this commit introduces an intermediate CONFIG_ARMADA_370_XP_IRQ hidden Kconfig option. This allows this option to select other interrupt-related Kconfig options (which will be needed in follow-up commits) rather than having such selects done from arch/arm/mach-<foo>/. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1455115621-22846-2-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* / irqchips/bmips: Add bcm6345-l1 interrupt controllerSimon Arlott2016-02-081-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | Add the BCM6345 interrupt controller based on the SMP-capable BCM7038 and the BCM3380 but with packed interrupt registers. Add the BCM6345 interrupt controller to a list with the existing BCM7038 so that interrupts on CPU1 are not ignored. Update the maintainers file list for BMIPS to include this driver. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Pawel Moll <pawel.moll@arm.com> Cc: linux-mips@linux-mips.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Rob Herring <robh@kernel.org> Link: http://lkml.kernel.org/r/5651D176.6030908@simon.arlott.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2016-01-241-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
| * IRQCHIP: irq-pic32-evic: Add support for PIC32 interrupt controllerCristian Birsan2016-01-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the interrupt controller present on PIC32 class devices. It handles all internal and external interrupts. This controller exists outside of the CPU core and is the arbitrator of all interrupts (including interrupts from the CPU itself) before they are presented to the CPU. The following features are supported: - DT properties for EVIC and for devices/peripherals that use interrupt lines - Persistent and non-persistent interrupt handling - irqdomain and generic chip support - Configuration of external interrupt edge polarity Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12092/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | irqchip/ts4800: Add TS-4800 interrupt controllerDamien Riegel2015-12-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the TS-4800 interrupt controller. This controller is instantiated in a companion FPGA, and multiplex interrupts for other FPGA IPs. As this component is external to the SoC, the SoC might need to reserve pins, so this controller is implemented as a platform driver and doesn't use the IRQCHIP_DECLARE construct. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: kernel@savoirfairelinux.com Link: http://lkml.kernel.org/r/1450728683-31416-2-git-send-email-damien.riegel@savoirfairelinux.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | Merge branch 'irq/gic-4.5' of ↵Thomas Gleixner2015-12-191-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull the GIC related updates from Marc Zyngier: "Not a lot this time (what a relief!), but an interesting series from Linus Walleij coming out of his work converting the ARM RealView platforms to DT, and a couple of mundane fixes."
| * | irqchip/gic: Support RealView variant setupLinus Walleij2015-12-161-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ARM RealView PB11MPCore reference design has some special bits in a system controller register to set up the GIC in one of three modes: legacy, new with DCC, new without DCC. The register is also used to enable FIQ. Since the platform will not boot unless this register is set up to "new with DCC" mode, we need a special quirk to be compiled-in for the RealView platforms. If we find the right compatible string on the GIC TestChip, we enable this quirk by looking up the system controller and enabling the special bits. We depend on the CONFIG_REALVIEW_DT Kconfig symbol as the old boardfile code has the same fix hardcoded, and this is only needed for the attempts to modernize the RealView code using device tree. After fixing this, the PB11MPCore boots with device tree only. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* / irqchip/mgigen: Add platform device driver for mbigen deviceMa Jun2015-12-181-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mbigen means Message Based Interrupt Generator(MBIGEN). Its a kind of interrupt controller that collects the interrupts from external devices and generate msi interrupt. Mbigen is applied to reduce the number of wire connected interrupts. As the peripherals increasing, the interrupts lines needed is increasing much, especially on the Arm64 server SOC. Therefore, the interrupt pin in GIC is not enough to cover so many peripherals. Mbigen is designed to fix this problem. Mbigen chip locates in ITS or outside of ITS. Mbigen chip hardware structure shows as below: mbigen chip |---------------------|-------------------| mgn_node0 mgn_node1 mgn_node2 | |-------| |-------|------| dev1 dev1 dev2 dev1 dev3 dev4 Each mbigen chip contains several mbigen nodes. External devices can connect to mbigen node through wire connecting way. Because a mbigen node only can support 128 interrupt maximum, depends on the interrupt lines number of devices, a device can connects to one more mbigen nodes. Also, several different devices can connect to a same mbigen node. When devices triggered interrupt,mbigen chip detects and collects the interrupts and generates the MBI interrupts by writing the ITS Translator register. To simplify mbigen driver,I used a new conception--mbigen device. Each mbigen device is initialized as a platform device. Mbigen device presents the parts(register, pin definition etc.) in mbigen chip corresponding to a peripheral device. So from software view, the structure likes below mbigen chip |---------------------|-----------------| mbigen device1 mbigen device2 mbigen device3 | | | dev1 dev2 dev3 Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ma Jun <majun258@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/mxs: Add Alphascale ASM9260 supportOleksij Rempel2015-10-141-1/+1
| | | | | | | | | | | | | | | | | | | | Freescale iMX23/iMX28 and Alphascale ASM9260 have similar interrupt collectors. We already prepared the mxs driver to handle a different register layout. Add the actual ASM9260 support. Differences between these devices: - Different register offsets - Different count of interupt lines per register - ASM9260 does not provide reset bit - ASM9260 does not support FIQ. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/1444677334-12242-6-git-send-email-linux@rempel-privat.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sourcesShenwei Wang2015-08-241-0/+1
| | | | | | | | | | | | | | | | | | | | IMX7D contains a new version of GPC IP block (GPCv2). It has two major functions: power management and wakeup source management. When the system is in WFI (wait for interrupt) mode, the GPC block will be the first block on the platform to be activated and signaled. In normal wait mode during cpu idle, the system can be woken up by any enabled interrupts. In standby or suspend mode, the system can only be wokem up by the pre-defined wakeup sources. Based-on-patch-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <shawn.guo@linaro.org> Cc: <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1440443055-7291-1-git-send-email-shenwei.wang@freescale.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2Eric Anholt2015-08-201-0/+1
| | | | | | | | | | | | | | | | | | | This interrupt controller is the new root interrupt controller with the timer, PMU events, and IPIs, and the bcm2835's interrupt controller is chained off of it to handle the peripherals. I wrote the interrupt chip support, while Andrea Merello wrote the IPI code. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-rpi-kernel@lists.infradead.org Cc: Lee Jones <lee@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1438902033-31477-5-git-send-email-eric@anholt.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* MIPS/irqchip: Move i8259 irqchip driver to drivers/irqchipRalf Baechle2015-07-311-0/+1
| | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip/gicv3-its: Add platform MSI supportMarc Zyngier2015-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | In order to support non-PCI MSI with the GICv3 ITS, add the minimal required entry points for the MSI domain (an msi_prepare implementation). The rest is only boilerplate code to find the raw ITS domain. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-16-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip/gicv3-its: Split PCI/MSI code from the core ITS driverMarc Zyngier2015-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | It is becoming obvious that having the PCI/MSI code in the same file as the the core ITS code is giving people implementing non-PCI MSI support the wrong kind of idea. In order to make things a bit clearer, let's move the PCI/MSI code out to its own file. Hopefully it will make it clear that whoever thinks of hooking into the core ITS better have a very strong point. We use a temporary entry point that will get removed in a subsequent patch, once the proper infrastructure is added. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-12-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2015-06-271-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ...
| * MIPS/IRQCHIP: Move Ingenic SoC intc driver to drivers/irqchipPaul Burton2015-06-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the driver for Ingenic SoC interrupt controllers into drivers/irqchip where it belongs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10147/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 11:18:43 +0100