| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The liointc hardware provides separate Interrupt Status Registers (ISR) for
each core. The current code uses always the ISR of core #0, which works
during boot because by default all interrupts are routed to core #0.
When the interrupt routing changes in the firmware configuration then this
causes interrupts to be lost because they are not configured in the
corresponding core.
Use the core index to access the correct ISR instead of a hardcoded 0.
[ tglx: Massaged changelog ]
Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support")
Co-developed-by: Tianli Xiong <xiongtianli@loongson.cn>
Signed-off-by: Tianli Xiong <xiongtianli@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240622043338.1566945-1-chenhuacai@loongson.cn
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
LIOINTC doesn't require specific logic to work with wakeup IRQs,
and no irq_set_wake callback is needed. To allow registered IRQs
from LIOINTC to be used as a wakeup-source, and ensure irq_set_irq_wake()
works well, the flag IRQCHIP_SKIP_SET_WAKE should be added.
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-5-lvjianmin@loongson.cn
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For the INT_POLARITY register of Loongson-2K series IRQ
controller, '0' indicates high level or rising edge triggered,
'1' indicates low level or falling edge triggered, and we
can find out the information from the Loongson 2K1000LA User
Manual v1.0, Table 9-2, Section 9.3 (中断寄存器描述 / Description
of the Interrupt Registers).
For Loongson-3 CPU series, setting INT_POLARITY register is not
supported and writting it has no effect.
So trigger polarity setting shouled be fixed for Loongson-2K CPU
series.
Fixes: 17343d0b4039 ("irqchip/loongson-liointc: Support to set IRQ type for ACPI path")
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-4-lvjianmin@loongson.cn
|
| |
|
|
|
|
|
|
|
|
| |
If int_edge/int_pol registers are configured to not be the default values, we
should save/restore them during S3/S4.
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221207140643.1600743-1-chenhuacai@loongson.cn
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* irq/misc-6.2:
: .
: Random minor fixes and improvments:
:
: - More Loongson fixes after the Loongarch merge
:
: - Error handling fixes for wpcm450, GIC...
:
: - BE detection for a FSL controller
:
: - Declare the Sifive PLIC as wake-up agnostic
:
: - Simplify fishing out the device data for the ST irqchip
:
: - Mark some data structures as __initconst in the apple-aic driver
:
: - Switch over from strtobool to kstrtobool
:
: - COMPILET_TEST fixes
:
: - and the mandatory "repeated word" commit...
: .
irqchip/ls-extirq: Fix endianness detection
irqchip/gic: Use kstrtobool() instead of strtobool()
irqchip/sifive-plic: Support wake IRQs
irqchip/loongson-liointc: Fix improper error handling in liointc_init()
irqchip/sl28cpld: Replace irqchip mask_invert with unmask_base
irqchip/wpcm450: Fix memory leak in wpcm450_aic_of_init()
irqchip/st: Use device_get_match_data() to simplify the code
irqchip/al-fic: Drop obsolete dependency on COMPILE_TEST
irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()
irqchip/mips-gic: Drop repeated word in comment
irqchip/apple-aic: Mark aic_info structs __initconst
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
For cores less than 4, eg, loongson2k1000 with 2 cores, the
of_property_match_string() may return with an error value,
which causes that liointc could not work. At least isr0 is
what should be checked like previous commit b2c4c3969fd7
("irqchip/loongson-liointc: irqchip add 2.0 version") did.
Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support")
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221104110712.23300-1-liupeibao@loongson.cn
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
HTVECINTC stands for "HyperTransport Interrupts" that described in
Section 14.3 of "Loongson 3A5000 Processor Reference Manual". For more
information please refer Documentation/loongarch/irq-chip-model.rst.
Though the extended model is the recommended one, there are still some
legacy model machines. So we add ACPI init support for HTVECINTC.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020142535.1725573-1-chenhuacai@loongson.cn
|
| |/
|
|
|
|
|
|
|
|
|
|
| |
For ACPI path, the xlate callback used IRQ_TYPE_NONE and ignored
the IRQ type in intspec[1]. For supporting to set type for
IRQs of the irqdomain, intspec[1] should be used to get IRQ
type.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221022075955.11726-5-lvjianmin@loongson.cn
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
All errors lead to the error handling path, except the one dealing
with "reg-names" in DT.
Fix it and release some resources before returning if this test fails.
Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[maz: fix commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1a6d74ab70712279023aa7bdbd31bd3aec103bc0.1659382063.git.christophe.jaillet@wanadoo.fr
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The recently merged LoongArch drivers paper over the lack of
topology information by creating a bunch of fwnodes for the
irqchips. So far, so good.
However, irq_domain_alloc_fwnode() is supposed to take a PA, and
not a kernel VA blindly cast as a PA, potentially disclosing
kernel VAs to userspace. In some other cases, even NULL is used
as the PA, which is entertaining.
Fix this by using the actual PA of the block when available,
and switch to a named fwnode in the other cases.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Jianmin Lv <lvjianmin@loongson.cn>
Link: https://lore.kernel.org/r/20220808105020.2689757-1-maz@kernel.org
|
| |
|
|
|
|
|
|
|
|
|
|
| |
LIOINTC stands for "Legacy I/O Interrupts" that described in Section
11.1 of "Loongson 3A5000 Processor Reference Manual". For more
information please refer Documentation/loongarch/irq-chip-model.rst.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-11-git-send-email-lvjianmin@loongson.cn
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
fa84f89395e0 ("irqchip/loongson-liointc: Fix build error for
LoongArch") replaced get_ebase_cpunum with physical processor
id from SMP facilities. However that breaks MIPS non-SMP build
and makes booting from other cores inpossible on non-SMP kernel.
Thus we revert get_ebase_cpunum back and use get_csr_cpuid for
LoongArch.
Fixes: fa84f89395e0 ("irqchip/loongson-liointc: Fix build error for LoongArch")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220609175242.977-1-jiaxun.yang@flygoat.com
|
| |
|
|
|
|
|
|
|
|
| |
liointc driver is shared by MIPS and LoongArch, this patch adjust the
code to fix build error for LoongArch.
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
| |
|
|
|
|
|
|
|
|
|
| |
Wherever possible, replace constructs that match either
generic_handle_irq(irq_find_mapping()) or
generic_handle_irq(irq_linear_revmap()) to a single call to
generic_handle_domain_irq().
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Add IO interrupt controller support for Loongson-2K1000, different
from the Loongson-3A series is that Loongson-2K1000 has 64 interrupt
sources, 0-31 correspond to the device tree liointc0 device node, and
the other correspond to liointc1 node.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Tested-by: Ming Wang <wangming01@loongson.cn>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
| |
|
|
|
|
|
|
|
|
| |
The purpose of separating loongson_system_configuration from boot_param.h
is to keep the other structure consistent with the firmware.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix build warnings as below:
>> drivers/irqchip/irq-loongson-liointc.c:134:12: warning: no previous prototype for 'liointc_of_init' [-Wmissing-prototypes]
134 | int __init liointc_of_init(struct device_node *node,
| ^~~~~~~~~~~~~~~
Fixes: dbb152267908c4b2c3639492a94 ("irqchip: Add driver for Loongson I/O Local Interrupt Controller")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210105025651.772024-1-chenhuacai@loongson.cn
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
In gc->mask_cache bits, 1 means enabled and 0 means disabled, but in the
loongson-liointc driver mask_cache is misused by reverting its meaning.
This patch fix the bug and update the comments as well.
Fixes: dbb152267908c4b2c3639492a ("irqchip: Add driver for Loongson I/O Local Interrupt Controller")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1596099090-23516-4-git-send-email-chenhc@lemote.com
|
| |
|
|
|
|
|
|
|
|
|
| |
In the function liointc_set_type(), we need to call the function
irq_gc_unlock_irqrestore() before returning.
Fixes: dbb152267908 ("irqchip: Add driver for Loongson I/O Local Interrupt Controller")
Reported-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1594087972-21715-8-git-send-email-yangtiezhu@loongson.cn
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The 1.0 version of that controller has a bug that status bit
of LPC IRQ sometimes doesn't get set correctly.
So we can always blame LPC IRQ when spurious interrupt happens
at the parent interrupt line which LPC IRQ supposed to route
to.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Co-developed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
|
This controller appeared on Loongson family of chips as the primary
package interrupt source.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Co-developed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
