summaryrefslogtreecommitdiffstats
path: root/drivers/leds/Makefile (follow)
Commit message (Collapse)AuthorAgeFilesLines
* leds: leds-lp5569: Add support for Texas Instruments LP5569Christian Marangi2024-06-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Texas Instruments LP5569 LED driver. Texas Instruments LP5569 is 9 channels chip with programmable engines. It almost a copy of LP5523 with fundamental changes to regs order and regs content. Has difference in how the clock is handled and doesn't support detecting clock time automatically, different handling for selftest and different scheme for the status regs. LED chip supports ENGINE and MUX to group LED and run precompiled code with magic values to run patterns. This is loaded via the sysfs entry and it's passed as a string of ASCII HEX char. One some devices using this LED Controller (a NBG7815 Router) it was found loading big precompiled pattern with up to 96 bytes of code. To have support for this "extended" scenario, hardcode each engine to support 4 pages of precompiled pattern (128 bytes of code) and 1 page for each MUX. This gives plenty of space for any kind precompiled pattern keeping simple logic for page handling of each engine and mux. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20240626160027.19703-21-ansuelsmth@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
* leds: Add ChromeOS EC driverThomas Weißschuh2024-06-211-0/+1
| | | | | | | | | | | | | | | The ChromeOS Embedded Controller exposes an LED control command. Expose its functionality through the leds subsystem. The LEDs are exposed as multicolor devices. A hardware trigger, which is active by default, is provided to let the EC itself take over control over the LED. The driver is designed to be probed via the cros_ec mfd device. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20240613-cros_ec-led-v3-4-500b50f41e0f@weissschuh.net Signed-off-by: Lee Jones <lee@kernel.org>
* leds: Introduce ExpressWire libraryDuje Mihanović2024-03-071-0/+3
| | | | | | | | | | | | | | | | | The ExpressWire protocol is shared between at least KTD2692 and KTD2801 with slight differences such as timings and the former not having a defined set of pulses for enabling the protocol (possibly because it does not support PWM unlike KTD2801). Despite these differences the ExpressWire handling code can be shared between the two, so in preparation for adding KTD2801 support introduce a library implementing this protocol. Suggested-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20240125-ktd2801-v5-1-e22da232a825@skole.hr Signed-off-by: Lee Jones <lee@kernel.org>
* leds: max5970: Add support for max5970Patrick Rudolph2023-12-131-0/+1
| | | | | | | | | The MAX5970 is hot swap controller and has 4 indication LED. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20231123132803.1107174-1-naresh.solanki@9elements.com Signed-off-by: Lee Jones <lee@kernel.org>
* leds: sun50i-a100: New driver for the A100 LED controllerSamuel Holland2023-12-131-0/+1
| | | | | | | | | | | | | Some Allwinner sunxi SoCs, starting with the A100, contain an LED controller designed to drive RGB LED pixels. Add a driver for it using the multicolor LED framework, and with LEDs defined in the device tree. Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20231029212738.7871-3-samuel@sholland.org Signed-off-by: Lee Jones <lee@kernel.org>
* leds: pca995x: Add support for PCA995X chipsIsai Gaspar2023-07-281-0/+1
| | | | | | | | | | | The PCA995x chips are I2C controlled LED drivers. Each chip has up to 16 outputs, each one with an individual 8-bit resolution PWM for brightness control. Signed-off-by: Isai Gaspar <isaiezequiel.gaspar@nxp.com> Signed-off-by: Marek Vasut <marex@denx.de> # Basically rewrite the driver Link: https://lore.kernel.org/r/20230713163516.21644-2-marex@denx.de Signed-off-by: Lee Jones <lee@kernel.org>
* leds: Fix config reference for AW200xx driverLukas Bulwahn2023-06-151-1/+1
| | | | | | | | | | | | | | | Commit 36a87f371b7a ("leds: Add AW20xx driver") adds config LEDS_AW200XX in drivers/leds/Kconfig, but then in drivers/leds/Makefile accidently refers to CONFIG_LEDS_W200XX; note the missing A! This typo makes it impossible to add the driver to a kernel build. Fix this wrong config reference. Fixes: 36a87f371b7a ("leds: Add AW20xx driver") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20230609100233.4111-1-lukas.bulwahn@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
* leds: Add AW20xx driverMartin Kurbanov2023-06-011-0/+1
| | | | | | | | | | | This commit adds support for AWINIC AW20036/AW20054/AW20072 LED driver. This driver supports following AW200XX features: - Individual 64-level DIM currents Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230519130403.212479-3-mmkurbanov@sberdevices.ru Signed-off-by: Lee Jones <lee@kernel.org>
* leds: Add Intel Cherry Trail Whiskey Cove PMIC LED driverYauhen Kharuzhy2023-05-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Add support for LEDs connected to the Intel Cherry Trail Whiskey Cove PMIC. Charger and general-purpose LEDs are supported. Hardware blinking is implemented, breathing is not. This driver was tested with Lenovo Yoga Book notebook. Changes by Hans de Goede (in response to review of v2): - Since the PMIC is connected to the battery any changes we make to the LED settings are permanent, even surviving reboot / poweroff. Save LED1 register settings on probe() and if auto-/hw-control was enabled on probe() restore the settings on remove() and shutdown(). - Delay switching LED1 to software control mode to first brightness write. - Use dynamically allocated drvdata instead of a global drvdata variable. - Ensure the LED is on when activating blinking. - Fix CHT_WC_LED_EFF_BREATHING val ((3 << 1) rather then BIT(3)). Link: https://lore.kernel.org/r/20190212205901.13037-2-jekhor@gmail.com Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Co-developed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230430195952.862527-2-hdegoede@redhat.com Signed-off-by: Lee Jones <lee@kernel.org>
* leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driverAndreas Kemnade2023-04-271-0/+1
| | | | | | | | | | | | | | The device provides 6 channels which can be individually turned off and on but groups of two channels share a common brightness register. Limitation: The GPIO to enable the device is not used yet. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230419111806.1100437-3-andreas@kemnade.info
* Merge tag 'leds-next-6.3' of ↵Linus Torvalds2023-02-241-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "Removed Drivers: - HTC ASIC3 LED New Functionality: - Provide generic led_get() which can be used by both DT and !DT platforms Fix-ups: - Convert a bunch of I2C subsystem users to the new probing API - Explicitly provide missing include files - Make use of led_init_default_state_get() and rid the custom variants - Use simplified fwnode_device_is_compatible() API - Provide some Device Tree additions / adaptions - Fix some trivial spelling issues Bug Fixes: - Prevent device refcount leak during led_put() and of_led_get() - Clear previous data from temporary led_pwm structure before processing next child - Fix Clang's warning about incompatible function types when using devm_add_action*()" * tag 'leds-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits) leds: Remove ide-disk trigger dt-bindings: leds: Add disk write/read and usb-host/usb-gadget Documentation: leds: Correct spelling dt-bindings: leds: Document Bluetooth and WLAN triggers leds: Remove asic3 driver leds: simatic-ipc-leds-gpio: Make sure we have the GPIO providing driver leds: tca6507: Convert to use fwnode_device_is_compatible() leds: syscon: Get rid of custom led_init_default_state_get() leds: pm8058: Get rid of custom led_init_default_state_get() leds: pca955x: Get rid of custom led_init_default_state_get() leds: mt6360: Get rid of custom led_init_default_state_get() leds: mt6323: Get rid of custom led_init_default_state_get() leds: bcm6358: Get rid of custom led_init_default_state_get() leds: bcm6328: Get rid of custom led_init_default_state_get() leds: an30259a: Get rid of custom led_init_default_state_get() leds: Move led_init_default_state_get() to the global header leds: Add missing includes and forward declarations in leds.h leds: is31fl319x: Wrap mutex_destroy() for devm_add_action_or_rest() leds: turris-omnia: Convert to i2c's .probe_new() leds: tlc591xx: Convert to i2c's .probe_new() ...
| * leds: Remove asic3 driverArnd Bergmann2023-01-301-1/+0
| | | | | | | | | | | | | | | | | | Since ASIC3 MFD driver is removed, the LED support is also obsolete. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230105134622.254560-25-arnd@kernel.org
* | leds: remove s3c24xx driverArnd Bergmann2023-01-161-1/+0
|/ | | | | | | | The s3c24xx platform is gone, so the led driver can be removed as well. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* leds: Move pwm-multicolor driver into rgb directorySven Schwermer2022-05-071-1/+0
| | | | | | | | The drivers/leds/rgb subdirectory is relatively fresh, so we move this new PWM multi-color driver into it. Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: Add PWM multicolor driverSven Schwermer2022-05-051-0/+1
| | | | | | | | | | By allowing to group multiple monochrome PWM LEDs into multicolor LEDs, all involved LEDs can be controlled in-sync. This enables using effects using triggers, etc. Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: Add driver for Qualcomm LPGBjorn Andersson2022-05-041-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Light Pulse Generator (LPG) is a PWM-block found in a wide range of PMICs from Qualcomm. These PMICs typically comes with 1-8 LPG instances, with their output being routed to various other components, such as current sinks or GPIOs. Each LPG instance can operate on fixed parameters or based on a shared lookup-table, altering the duty cycle over time. This provides the means for hardware assisted transitions of LED brightness. A typical use case for the fixed parameter mode is to drive a PWM backlight control signal, the driver therefor allows each LPG instance to be exposed to the kernel either through the LED framework or the PWM framework. A typical use case for the LED configuration is to drive RGB LEDs in smartphones etc, for which the driver supports multiple channels to be ganged up to a MULTICOLOR LED. In this configuration the pattern generators will be synchronized, to allow for multi-color patterns. The idea of modelling this as a LED driver ontop of a PWM driver was considered, but setting the properties related to patterns does not fit in the PWM API. Similarly the idea of just duplicating the lower bits in a PWM and LED driver separately was considered, but this would not allow the PWM channels and LEDs to be configured on a per-board basis. The driver implements the more complex LED interface, and provides a PWM interface on the side of that, in the same driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> [On the Sony Xperia Nile Discovery, SDM630] Signed-off-by: Pavel Machek <pavel@ucw.cz>
* Merge tag 'leds-5.17-rc1' of ↵Linus Torvalds2022-01-131-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "Nothing major is happening here" * tag 'leds-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: lp55xx: initialise output direction from dts ARM: dts: omap3-n900: Fix lp5523 for multi color leds: ktd2692: Drop calling dev_of_node() in ktd2692_parse_dt leds: lgm-sso: Get rid of duplicate of_node assignment leds: tca6507: Get rid of duplicate of_node assignment leds: leds-fsg: Drop FSG3 LED driver leds: lp50xx: remove unused variable dt-bindings: leds: Replace moonlight with indicator in mt6360 example leds: led-core: Update fwnode with device_set_node leds: tca6507: use swap() to make code cleaner leds: Add mt6360 driver dt-bindings: leds: Add bindings for MT6360 LED
| * leds: leds-fsg: Drop FSG3 LED driverLinus Walleij2022-01-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The board file using this driver has been deleted and the FSG3 LEDs can be modeled using a system controller and some register bit LEDs in the device tree so this driver is no longer needed. Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Krzysztof Hałasa <khalasa@piap.pl> Cc: Rod Whitby <rod@whitby.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* | leds: simatic-ipc-leds: add new driver for Siemens Industial PCsHenning Schild2021-12-231-0/+3
|/ | | | | | | | | | | | | This driver adds initial support for several devices from Siemens. It is based on a platform driver introduced in an earlier commit. One of the supported machines has GPIO connected LEDs, here we poke GPIO memory directly because pinctrl does not come up. Signed-off-by: Henning Schild <henning.schild@siemens.com> Acked-by: Pavel Machek <pavel@ucw.cz> Link: https://lore.kernel.org/r/20211213120502.20661-3-henning.schild@siemens.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* leds: ktd2692: Move driver to flash subdirectoryLinus Walleij2021-07-121-1/+0
| | | | | | | | | | We created a subdirectory for LED drivers that depend on CONFIG_LEDS_CLASS_FLASH, and this driver does so let's move it there. Cc: Ingi Kim <ingi2.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: lm3601x: Move driver to flash subdirectoryLinus Walleij2021-07-121-1/+0
| | | | | | | | | | We created a subdirectory for LED drivers that depend on CONFIG_LEDS_CLASS_FLASH, and this driver does so let's move it there. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: sgm3140: Move driver to flash subdirectoryLinus Walleij2021-07-121-1/+0
| | | | | | | | | | We created a subdirectory for LED drivers that depend on CONFIG_LEDS_CLASS_FLASH, and this driver does so let's move it there. Cc: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: max77693: Move driver to flash subdirectoryLinus Walleij2021-07-121-1/+0
| | | | | | | | | | We created a subdirectory for LED drivers that depend on CONFIG_LEDS_CLASS_FLASH, and this driver does so let's move it there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: as3645a: Move driver to flash subdirectoryLinus Walleij2021-07-121-1/+0
| | | | | | | | | | We created a subdirectory for LED drivers that depend on CONFIG_LEDS_CLASS_FLASH, and this driver does so let's move it there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: aat1290: Move driver to flash subdirectoryLinus Walleij2021-07-121-1/+0
| | | | | | | | | | We created a subdirectory for LED drivers that depend on CONFIG_LEDS_CLASS_FLASH, and this driver does so let's move it there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: lgm: Improve Kconfig helpRahul Tanwar2021-03-251-1/+1
| | | | | | | | Remove unnecessary Kconfig symbol LEDS_BLINK Improve Kconfig help text to make it more useful. Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* Merge tag 'leds-5.12-rc1' of ↵Linus Torvalds2021-02-261-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "Besides the usual fixes and new drivers, we are changing CLASS_FLASH to return success to make it easier to work with V4L2 stuff disabled, and we are getting rid of enum that should have been plain integer long time ago. I'm slightly nervous about potential warnings, but it needed to be fixed at some point" * tag 'leds-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: lp50xx: Get rid of redundant explicit casting leds: lp50xx: Update headers block to reflect reality leds: lp50xx: Get rid of redundant check in lp50xx_enable_disable() leds: lp50xx: Reduce level of dereferences leds: lp50xx: Switch to new style i2c-driver probe function leds: lp50xx: Don't spam logs when probe is deferred leds: apu: extend support for PC Engines APU1 with newer firmware leds: flash: Fix multicolor no-ops registration by return 0 leds: flash: Add flash registration with undefined CONFIG_LEDS_CLASS_FLASH leds: lgm: Add LED controller driver for LGM SoC dt-bindings: leds: Add bindings for Intel LGM SoC leds: led-core: Get rid of enum led_brightness leds: gpio: Set max brightness to 1 leds: lm3533: Switch to using the new API kobj_to_dev() leds: ss4200: simplify the return expression of register_nasgpio_led() leds: Use DEVICE_ATTR_{RW, RO, WO} macros
| * leds: lgm: Add LED controller driver for LGM SoCAmireddy Mallikarjuna reddy2021-02-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | Parallel to serial conversion, which is also called SSO controller, can drive external shift register for LED outputs, reset or general purpose outputs. This driver enables LED support for Serial Shift Output Controller (SSO). Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* | leds: rt8515: Add Richtek RT8515 LED driverLinus Walleij2021-01-311-0/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a driver for the Richtek RT8515 dual channel torch/flash white LED driver. This LED driver is found in some mobile phones from Samsung such as the GT-S7710 and GT-I8190. A V4L interface is added. We do not have a proper datasheet for the RT8515 but it turns out that RT9387A has a public datasheet and is essentially the same chip. We designed the driver in accordance with this datasheet. The day someone needs to drive a RT9387A this driver can probably easily be augmented to handle that chip too. Sakari Ailus, Pavel Machek and Andy Shevchenko helped significantly in getting this driver right. Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Cc: linux-media@vger.kernel.org Cc: phone-devel@vger.kernel.org Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: Add driver for Acer Iconia Tab A500Dmitry Osipenko2020-09-261-0/+1
| | | | | | | | | | Acer Iconia Tab A500 is an Android tablet device which has two LEDs embedded into the Power Button. Orange LED indicates "battery charging" status and white LED indicates "wake-up/charge-done" status. The new LED driver provides control over both LEDs to userspace. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: lp50xx: Add the LP50XX family of the RGB LED driverDan Murphy2020-08-171-0/+1
| | | | | | | | | | | | | | | | | | | | | Introduce the LP5036/30/24/18/12/9 RGB LED driver. The difference in these parts are the number of LED outputs where the: LP5036 can control 36 LEDs LP5030 can control 30 LEDs LP5024 can control 24 LEDs LP5018 can control 18 LEDs LP5012 can control 12 LEDs LP5009 can control 9 LEDs The device has the ability to group LED outputs into control banks so that multiple LED banks can be controlled with the same mixing and brightness. Or the LED outputs can also be controlled independently. Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: initial support for Turris Omnia LEDsMarek Behún2020-07-241-0/+1
| | | | | | | | | | | | | | | This adds basic support for LEDs on the front side of CZ.NIC's Turris Omnia router. There are 12 RGB LEDs. The controller supports HW triggering mode for the LEDs, but this driver does not support it yet, and sets all the LEDs defined in device-tree into SW mode upon probe. This driver uses the multicolor LED framework. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: multicolor: Introduce a multicolor class definitionDan Murphy2020-07-221-0/+1
| | | | | | | | | | | | | | | Introduce a multicolor class that groups colored LEDs within a LED node. The multicolor class groups monochrome LEDs and allows controlling two aspects of the final combined color: hue and lightness. The former is controlled via the intensity file and the latter is controlled via brightness file. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> [squashed leds: multicolor: Fix camel case in documentation in]
* leds: add aw2013 driverNikita Travkin2020-05-251-0/+1
| | | | | | | | This commit adds support for AWINIC AW2013 3-channel LED driver. The chip supports 3 PWM channels and is controlled with I2C. Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: add sgm3140 driverLuca Weiss2020-04-271-0/+1
| | | | | | | | | | Add a driver for the SGMICRO SGM3140 Buck/Boost Charge Pump LED driver. This device is controlled by two GPIO pins, one for enabling and the second one for switching between torch and flash mode. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: ariel: Add driver for status LEDs on Dell Wyse 3020Lubomir Rintel2020-04-271-0/+1
| | | | | | | | This adds support for controlling the LEDs attached to the Embedded Controller on a Dell Wyse 3020 "Ariel" board. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: sort Makefile entriesPavel Machek2020-04-061-50/+50
| | | | | | Sort Makefile entries to reduce risk of rejects. Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: add SGI IP30 led supportThomas Bogendoerfer2020-02-261-0/+1
| | | | | | | | | | This patch implemenets a driver to support the front panel LEDs of SGI Octane (IP30) workstations. Reviewed-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: tps6105x: add driver for MFD chip LED modeSven Van Asbroeck2019-12-211-0/+1
| | | | | | | | | This driver adds support for the LED operational mode of the tps6105x MFD device. Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* leds: add LED driver for EL15203000 boardOleh Kravchenko2019-11-031-0/+1
| | | | | | | | | | This patch adds a LED class driver for the LEDs found on the Crane Merchandising System EL15203000 LEDs board (aka RED LEDs board). Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Reviewed-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
* Merge tag 'ti-lmu-led-drivers' into for-nextJacek Anaszewski2019-06-111-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge immutable branch between LEDs, MFD and REGULATOR due to TI LMU LED support rework and introduction of two new drivers with DT bindings. * tag 'ti-lmu-led-drivers': leds: lm36274: Introduce the TI LM36274 LED driver dt-bindings: leds: Add LED bindings for the LM36274 regulator: lm363x: Add support for LM36274 mfd: ti-lmu: Add LM36274 support to the ti-lmu dt-bindings: mfd: Add lm36274 bindings to ti-lmu leds: lm3697: Introduce the lm3697 driver mfd: ti-lmu: Remove support for LM3697 dt-bindings: ti-lmu: Modify dt bindings for the LM3697 leds: TI LMU: Add common code for TI LMU devices dt-bindings: mfd: LMU: Add ti,brightness-resolution dt-bindings: mfd: LMU: Add the ramp up/down property
| * leds: lm36274: Introduce the TI LM36274 LED driverDan Murphy2019-06-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Introduce the LM36274 LED driver. This driver uses the ti-lmu MFD driver to probe this LED driver. The driver configures only the LED registers and enables the outputs according to the config file. The driver utilizes the TI LMU (Lighting Management Unit) LED common framework to set the brightness bits. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
| * leds: lm3697: Introduce the lm3697 driverDan Murphy2019-05-241-0/+1
| | | | | | | | | | | | | | | | | | | | Introduce the lm3697 LED driver for backlighting and display. Datasheet location: http://www.ti.com/lit/ds/symlink/lm3697.pdf Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
| * leds: TI LMU: Add common code for TI LMU devicesDan Murphy2019-05-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a TI LMU common framework for TI LMU devices that share common features. Currently the runtime ramp and brightness setting have been identified as common features with common register settings. This work is derived from Milo Kims TI LMU MFD code. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* | leds: spi-byte: add single byte SPI LED driverChristian Mauderer2019-05-241-0/+1
|/ | | | | | | | | This driver adds support for simple SPI based LED controller which use only one byte for setting the brightness. Signed-off-by: Christian Mauderer <oss@c-mauderer.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
*-. Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', ↵Lee Jones2019-05-141-0/+1
|\ \ | | | | | | | | | | | | | | | 'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged Immutable branch between MFD, ARM and Net due for the 5.2 merge window
| | * leds: max77650: Add LEDs supportBartosz Golaszewski2019-05-081-0/+1
| |/ | | | | | | | | | | | | | | | | | | This adds basic support for LEDs for the max77650 PMIC. The device has three current sinks for driving LEDs. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* / leds: lm3532: Introduce the lm3532 LED driverDan Murphy2019-04-071-0/+1
|/ | | | | | | | | | | | | Introduce the Texas Instruments LM3532 White LED driver. The driver supports ALS configurability or manual brightness control. The driver also supports associating LED strings with specific control banks in a group or as individually controlled strings. Signed-off-by: Dan Murphy <dmurphy@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: add Panasonic AN30259A supportSimon Shields2018-09-101-0/+1
| | | | | | | | | | | | | | AN30259A is a 3-channel LED driver which uses I2C. It supports timed operation via an internal PWM clock, and variable brightness. This driver offers support for basic hardware-based blinking and brightness control. The datasheet is freely available: https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf Signed-off-by: Simon Shields <simon@lineageos.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
* leds: lm3601x: Introduce the lm3601x LED driverDan Murphy2018-05-231-0/+1
| | | | | | | | | | | | | | | | | | | Introduce the family of LED devices that can drive a torch, strobe or IR LED. The LED driver can be configured with a strobe timer to execute a strobe flash. The IR LED brightness is controlled via the torch brightness register. The data sheet for each the LM36010 and LM36011 LED drivers can be found here: http://www.ti.com/product/LM36010 http://www.ti.com/product/LM36011 Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 11:55:14 +0100