| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove duplicate included header file trace/events/udp.h and the
following warning reported by make includecheck:
trace/events/udp.h is included more than once
Compile-tested only.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240706071132.274352-2-thorsten.blum@toblux.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the netdev-genl per queue stats API.
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump qstats-get --json '{"scope":"queue"}'
[{'ifindex': 4,
'queue-id': 0,
'queue-type': 'rx',
'rx-alloc-fail': 0,
'rx-bytes': 266613,
'rx-packets': 3325},
{'ifindex': 4,
'queue-id': 0,
'queue-type': 'tx',
'tx-bytes': 142823367,
'tx-packets': 2387}]
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240706064324.137574-1-fujita.tomonori@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix typos s/steam/stream/ and spell out Schedule/Unschedule in the
comments.
Compile-tested only.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240704202558.62704-2-thorsten.blum@toblux.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot reported a UAF caused by a race when the L2TP work queue closes a
tunnel at the same time as a userspace thread closes a session in that
tunnel.
Tunnel cleanup is handled by a work queue which iterates through the
sessions contained within a tunnel, and closes them in turn.
Meanwhile, a userspace thread may arbitrarily close a session via
either netlink command or by closing the pppox socket in the case of
l2tp_ppp.
The race condition may occur when l2tp_tunnel_closeall walks the list
of sessions in the tunnel and deletes each one. Currently this is
implemented using list_for_each_safe, but because the list spinlock is
dropped in the loop body it's possible for other threads to manipulate
the list during list_for_each_safe's list walk. This can lead to the
list iterator being corrupted, leading to list_for_each_safe spinning.
One sequence of events which may lead to this is as follows:
* A tunnel is created, containing two sessions A and B.
* A thread closes the tunnel, triggering tunnel cleanup via the work
queue.
* l2tp_tunnel_closeall runs in the context of the work queue. It
removes session A from the tunnel session list, then drops the list
lock. At this point the list_for_each_safe temporary variable is
pointing to the other session on the list, which is session B, and
the list can be manipulated by other threads since the list lock has
been released.
* Userspace closes session B, which removes the session from its parent
tunnel via l2tp_session_delete. Since l2tp_tunnel_closeall has
released the tunnel list lock, l2tp_session_delete is able to call
list_del_init on the session B list node.
* Back on the work queue, l2tp_tunnel_closeall resumes execution and
will now spin forever on the same list entry until the underlying
session structure is freed, at which point UAF occurs.
The solution is to iterate over the tunnel's session list using
list_first_entry_not_null to avoid the possibility of the list
iterator pointing at a list item which may be removed during the walk.
Also, have l2tp_tunnel_closeall ref each session while it processes it
to prevent another thread from freeing it.
cpu1 cpu2
--- ---
pppol2tp_release()
spin_lock_bh(&tunnel->list_lock);
for (;;) {
session = list_first_entry_or_null(&tunnel->session_list,
struct l2tp_session, list);
if (!session)
break;
list_del_init(&session->list);
spin_unlock_bh(&tunnel->list_lock);
l2tp_session_delete(session);
l2tp_session_delete(session);
spin_lock_bh(&tunnel->list_lock);
}
spin_unlock_bh(&tunnel->list_lock);
Calling l2tp_session_delete on the same session twice isn't a problem
per-se, but if cpu2 manages to destruct the socket and unref the
session to zero before cpu1 progresses then it would lead to UAF.
Reported-by: syzbot+b471b7c936301a59745b@syzkaller.appspotmail.com
Reported-by: syzbot+c041b4ce3a6dfd1e63e2@syzkaller.appspotmail.com
Fixes: d18d3f0a24fc ("l2tp: replace hlist with simple list for per-tunnel session list")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Link: https://patch.msgid.link/20240704152508.1923908-1-jchapman@katalix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
sa8775p-ride-r3
On sa8775p-ride-r3 the RX clocks from the AQR115C PHY are not available at
the time of the DMA reset. We can however extract the RX clock from the
internal SERDES block. Once the link is up, we can revert to the
previous state.
The AQR115C PHY doesn't support in-band signalling so we can count on
getting the link up notification and safely reuse existing callbacks
which are already used by another HW quirk workaround which enables the
functional clock to avoid a DMA reset due to timeout.
Only enable loopback on revision 3 of the board - check the phy_mode to
make sure.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240703181500.28491-3-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for 2.5G speed in 2500BASEX mode to the QCom ethqos driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240703181500.28491-2-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
WARN_ON_ONCE("string") doesn't really do what appears to
be intended, so fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 90de47f020db ("page_pool: fragment API support for 32-bit arch with 64-bit DMA")
Link: https://patch.msgid.link/20240705134221.2f4de205caa1.I28496dc0f2ced580282d1fb892048017c4491e21@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's very useful to be able to interrupt the tests during development.
Detect KeyboardInterrupt, run the cleanups and exit.
Link: https://patch.msgid.link/20240705015222.675840-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set proper MAC capabilities for port 4 on LAN9371 and LAN9372 switches with
integrated 100BaseTX PHY. And introduce the is_lan937x_tx_phy() function to
reuse it where applicable.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At this time, conntrack either returns NF_ACCEPT or NF_DROP.
To improve debuging it would be nice to be able to replace NF_DROP verdict
with NF_DROP_REASON() helper,
This helper releases the skb instantly (so drop_monitor can pinpoint
exact location) and returns NF_STOLEN.
Prepare call sites to deal with this before introducing such changes
in conntrack and nat core.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch expands PSE callbacks with newly introduced
pi_get/set_current_limit() and pi_get_voltage() callback.
It also add the power limit ranges description in the status returned.
The only way to set ps692x0 port power limit is by configure the power
class plus a small power supplement which maximum depends on each class.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-7-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expand the c33 PSE attributes with power limit to be able to set and get
the PSE Power Interface power limit.
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
--json '{"header":{"dev-name":"eth1"}}'
{'c33-pse-actual-pw': 1700,
'c33-pse-admin-state': 3,
'c33-pse-avail-pw-limit': 97500,
'c33-pse-pw-class': 4,
'c33-pse-pw-d-status': 4,
'c33-pse-pw-limit-ranges': [{'max': 18100, 'min': 15000},
{'max': 38000, 'min': 30000},
{'max': 65000, 'min': 60000},
{'max': 97500, 'min': 90000}],
'header': {'dev-index': 5, 'dev-name': 'eth1'}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-set
--json '{"header":{"dev-name":"eth1"},
"c33-pse-avail-pw-limit":19000}'
None
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-6-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch expands the status information provided by ethtool for PSE c33
with available power limit and available power limit ranges. It also adds
a call to pse_ethtool_set_pw_limit() to configure the PSE control power
limit.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-5-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch add a way to get and set the power limit of a PSE PI.
For that it uses regulator API callbacks wrapper like get_voltage() and
get/set_current_limit() as power is simply V * I.
We used mW unit as defined by the IEEE 802.3-2022 standards.
set_current_limit() uses the voltage return by get_voltage() and the
desired power limit to calculate the current limit. get_voltage() callback
is then mandatory to set the power limit.
get_current_limit() callback is by default looking at a driver callback
and fallback to extracting the current limit from _pse_ethtool_get_status()
if the driver does not set its callback. We prefer let the user the choice
because ethtool_get_status return much more information than the current
limit.
expand pse status with c33_pw_limit_ranges to return the ranges available
to configure the power limit.
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-4-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This update expands pd692x0_ethtool_get_status() callback with newly
introduced details such as the detected class, current power delivered,
and extended state information.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-3-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expand the c33 PSE attributes with PSE class, extended state information
and power consumption.
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
--json '{"header":{"dev-name":"eth0"}}'
{'c33-pse-actual-pw': 1700,
'c33-pse-admin-state': 3,
'c33-pse-pw-class': 4,
'c33-pse-pw-d-status': 4,
'header': {'dev-index': 4, 'dev-name': 'eth0'}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
--json '{"header":{"dev-name":"eth0"}}'
{'c33-pse-admin-state': 3,
'c33-pse-ext-state': 'mr-mps-valid',
'c33-pse-ext-substate': 2,
'c33-pse-pw-d-status': 2,
'header': {'dev-index': 4, 'dev-name': 'eth0'}}
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-2-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This update expands the status information provided by ethtool for PSE c33.
It includes details such as the detected class, current power delivered,
and extended state information.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240704-feature_poe_power_cap-v6-1-320003204264@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test to verify sampling packets via psample works.
In order to do that, create a subcommand in ovs-dpctl.py to listen to
on the psample multicast group and print samples.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Tested-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-11-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The trunc action was supported decode-able but not parse-able. Add
support for parsing the action string.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-10-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The userspace action lacks parsing support plus it contains a bug in the
name of one of its attributes.
This patch makes userspace action work.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-9-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add sample and psample action support to ovs-dpctl.py.
Refactor common attribute parsing logic into an external function.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-8-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a packet sample is observed, the sampling rate that was used is
important to estimate the real frequency of such event.
Store the probability of the parent sample action in the skb's cb area
and use it in psample action to pass it down to psample module.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-7-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for a new action: psample.
This action accepts a u32 group id and a variable-length cookie and uses
the psample multicast group to make the packet available for
observability.
The maximum length of the user-defined cookie is set to 16, same as
tc_cookie, to discourage using cookies that will not be offloadable.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-6-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Although not explicitly documented in the psample module itself, the
definition of PSAMPLE_ATTR_SAMPLE_RATE seems inherited from act_sample.
Quoting tc-sample(8):
"RATE of 100 will lead to an average of one sampled packet out of every
100 observed."
With this semantics, the rates that we can express with an unsigned
32-bits number are very unevenly distributed and concentrated towards
"sampling few packets".
For example, we can express a probability of 2.32E-8% but we
cannot express anything between 100% and 50%.
For sampling applications that are capable of sampling a decent
amount of packets, this sampling rate semantics is not very useful.
Add a new flag to the uAPI that indicates that the sampling rate is
expressed in scaled probability, this is:
- 0 is 0% probability, no packets get sampled.
- U32_MAX is 100% probability, all packets get sampled.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-5-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If nobody is listening on the multicast group, generating the sample,
which involves copying packet data, seems completely unnecessary.
Return fast in this case.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-4-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the action has a user_cookie, pass it along to the sample so it can
be easily identified.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-3-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a user cookie to the sample metadata so that sample emitters can
provide more contextual information to samples.
If present, send the user cookie in a new attribute:
PSAMPLE_ATTR_USER_COOKIE.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-2-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement operations to get and set flow-control link parameters.
Both is done by simply calling phylink_ethtool_{get,set}_pauseparam().
Fix whitespace in mtk_ethtool_ops while at it.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://patch.msgid.link/e3ece47323444631d6cb479f32af0dfd6d145be0.1720088047.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MT7981,7986 and 7988 all supports 32768 PPE entries, and MT7621/MT7620
supports 16384 PPE entries, but only set to 8192 entries in driver. So
incrase max entries to 16384 instead.
Signed-off-by: Elad Yifee <eladwf@gmail.com>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/TY3P286MB261103F937DE4EEB0F88437D98DE2@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`ar9331_sw_bus` is not modified and can be declared as const to
move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240703-net-const-regmap-v1-4-ff4aeceda02c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`regmap_encx24j600`, `phycfg` and `phymap_encx24j600` are not modified
and can be declared as const to move their data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240703-net-const-regmap-v1-3-ff4aeceda02c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`am654_icss_iep_regmap_config` is only assigned to a pointer that passes
the data as read-only.
Add the const modifier to the struct and pointer to move the data to a
read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240703-net-const-regmap-v1-2-ff4aeceda02c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`qca8k_regmap_config` is not modified and can be declared as const to
move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240703-net-const-regmap-v1-1-ff4aeceda02c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During the introduction of struct bpf_net_context handling for
XDP-redirect, the tun driver has been missed.
Jakub also pointed out that there is another call chain to
do_xdp_generic() originating from netif_receive_skb() and drivers may
use it outside from the NAPI context.
Set the bpf_net_context before invoking BPF XDP program within the TUN
driver. Set the bpf_net_context also in do_xdp_generic() if a xdp
program is available.
Reported-by: syzbot+0b5c75599f1d872bea6f@syzkaller.appspotmail.com
Reported-by: syzbot+5ae46b237278e2369cac@syzkaller.appspotmail.com
Reported-by: syzbot+c1e04a422bbc0f0f2921@syzkaller.appspotmail.com
Fixes: 401cb7dae8130 ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240704144815.j8xQda5r@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some devices with MediaTek SoCs don't use the first but only the second
MAC in the chip. Especially with MT7981 which got a built-in 1GE PHY
connected to the second MAC this is quite common.
Make sure to reset and enable PSE also in those cases by skipping gaps
using 'continue' instead of aborting the loop using 'break'.
Fixes: dee4dd10c79a ("net: ethernet: mtk_eth_soc: ppe: add support for multiple PPEs")
Suggested-by: Elad Yifee <eladwf@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/379ae584cea112db60f4ada79c7e5ba4f3364a64.1719862038.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At this time, conntrack either returns NF_ACCEPT or NF_DROP.
To improve debuging it would be nice to be able to replace NF_DROP
verdict with NF_DROP_REASON() helper,
This helper releases the skb instantly (so drop_monitor can pinpoint
precise location) and returns NF_STOLEN.
Prepare call sites to deal with this before introducing such changes
in conntrack and nat core.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Aaron Conole <aconole@redhat.om>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recently the DW XPCS DT-bindings have been introduced and the DW XPCS
driver has been altered to support the DW XPCS registered as a platform
device. In order to have the DW XPCS DT-device accessed from the STMMAC
driver let's alter the STMMAC PCS-setup procedure to support the
"pcs-handle" property containing the phandle reference to the DW XPCS
device DT-node. The respective fwnode will be then passed to the
xpcs_create_fwnode() function which in its turn will create the DW XPCS
descriptor utilized in the main driver for the PCS-related setups.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the only STMMAC platform driver using the DW XPCS code is the
Intel mGBE device driver. (It can be determined by finding all the drivers
having the stmmac_mdio_bus_data::has_xpcs flag set.) At the same time the
low-level platform driver masks out the DW XPCS MDIO-address from being
auto-detected as PHY by the MDIO subsystem core. Seeing the PCS MDIO ID is
known the procedure of the DW XPCS device creation can be simplified by
dropping the loop over all the MDIO IDs. From now the DW XPCS device
descriptor will be created for the MDIO-bus address pre-defined by the
platform drivers via the stmmac_mdio_bus_data::pcs_mask field.
Note besides this shall speed up a bit the Intel mGBE probing.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's now possible to have the DW XPCS device defined as a standard
platform device for instance in the platform DT-file. Although that
functionality is useless unless there is a way to have the device found by
the client drivers (STMMAC/DW *MAC, NXP SJA1105 Eth Switch, etc). Provide
such ability by means of the xpcs_create_fwnode() method. It needs to be
called with the device DW XPCS fwnode instance passed. That node will be
then used to find the MDIO-device instance in order to create the DW XPCS
descriptor.
Note the method semantics and name is similar to what has been recently
introduced in the Lynx PCS driver.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Synopsys DesignWare XPCS IP-core can be synthesized with the device CSRs
being accessible over the MCI or APB3 interface instead of the MDIO bus
(see the CSR_INTERFACE HDL parameter). Thus all the PCS registers can be
just memory mapped and be a subject of the standard MMIO operations of
course taking into account the peculiarities of the Clause C45 CSRs
mapping. From that perspective the DW XPCS devices would look as just
normal platform devices for the kernel.
On the other hand in order to have the DW XPCS devices handled by the
pcs-xpcs.c driver they need to be registered in the framework of the
MDIO-subsystem. So the suggested change is about providing a DW XPCS
platform device driver registering a virtual MDIO-bus with a single
MDIO-device representing the DW XPCS device.
DW XPCS platform device is supposed to be described by the respective
compatible string "snps,dw-xpcs" (or with the PMA-specific compatible
string), CSRs memory space and optional peripheral bus and reference clock
sources. Depending on the INDIRECT_ACCESS IP-core synthesize parameter the
memory-mapped reg-space can be represented as either directly or
indirectly mapped Clause 45 space. In the former case the particular
address is determined based on the MMD device and the registers offset (5
+ 16 bits all together) within the device reg-space. In the later case
there is only 8 lower address bits are utilized for the registers mapping
(255 CSRs). The upper bits are supposed to be written into the respective
viewport CSR in order to select the respective MMD sub-page.
Note, only the peripheral bus clock source is requested in the platform
device probe procedure. The core and pad clocks handling has been
implemented in the framework of the xpcs_create() method intentionally
since the clocks-related setups are supposed to be performed later, during
the DW XPCS main configuration procedures. (For instance they will be
required for the DW Gen5 10G PMA configuration.)
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
