summaryrefslogtreecommitdiffstats
path: root/drivers/leds (follow)
Commit message (Collapse)AuthorAgeFilesLines
* leds: lp55xx: handle enable pin in driverSebastian Reichel2013-10-251-12/+13
| | | | | | | | | | | | | This patch moves the handling of the chip's enable pin from the board code into the driver. It also updates all board-code files using the driver to incorporate this change. This is needed for device tree support of the enable pin. Signed-off-by: Sebastian Reichel <sre@debian.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds-gpio: of: led should not be created if its status is disabledJosh Wu2013-10-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | now the leds-gpio driver will create every child led node without checking the status is disabled or not. for example, if we have a led node like d3, and its status is disabled: leds { d3 { label = "d3"; gpios = <&pioE 24 0>; status = "disabled"; }; }; we except the d3 should not be created. And the gpios should not be request as well. But current driver will create d3 and request its gpio. This patch fix this by using for_each_available_child_of_node() and of_get_available_child_count() to enumerate all child nodes. So the disabled node will be inavailable. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: Added driver for the NXP PCA9685 I2C chipMaximilian Güntner2013-10-223-0/+224
| | | | | | | | | The NXP PCA9685 supports 16 channels/leds using a 12-bit PWM (4095 levels of brightness) This driver supports configuration using platform_data. Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: pwm: Remove redundant of_match_ptrSachin Kamat2013-10-221-1/+1
| | | | | | | | The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: Include linux/of.h headerSachin Kamat2013-10-225-0/+5
| | | | | | | 'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: dac124s085: Remove redundant spi_set_drvdataSachin Kamat2013-10-221-3/+0
| | | | | | | | Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: lp55xx: enable setting default triggerLinus Walleij2013-10-221-0/+3
| | | | | | | | | | | | This enables setting a default trigger on an LP55xx channel, either from platform data or device tree. This mechanism is identical to the mechanism for GPIO LEDs and references the common LEDs device tree bindings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Milo Kim <milo.kim@ti.com> Acked-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: blinkm: Remove redundant breakSachin Kamat2013-10-221-3/+0
| | | | | | | | 'break' after return is redundant. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Jan-Simon Möller <dl9pf@gmx.de> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* Merge branch 'for-next' of ↵Linus Torvalds2013-09-1237-300/+1435
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull led updates from Bryan Wu: "Sorry for the late pull request, since I'm just back from vacation. LED subsystem updates for 3.12: - pca9633 driver DT supporting and pca9634 chip supporting - restore legacy device attributes for lp5521 - other fixing and updates" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (28 commits) leds: wm831x-status: Request a REG resource leds: trigger: ledtrig-backlight: Fix invalid memory access in fb_event notification callback leds-pca963x: Fix device tree parsing leds-pca9633: Rename to leds-pca963x leds-pca9633: Add mutex to the ledout register leds-pca9633: Unique naming of the LEDs leds-pca9633: Add support for PCA9634 leds: lp5562: use LP55xx common macros for device attributes Documentation: leds-lp5521,lp5523: update device attribute information leds: lp5523: remove unnecessary writing commands leds: lp5523: restore legacy device attributes leds: lp5523: LED MUX configuration on initializing leds: lp5523: make separate API for loading engine leds: lp5521: remove unnecessary writing commands leds: lp5521: restore legacy device attributes leds: lp55xx: add common macros for device attributes leds: lp55xx: add common data structure for program Documentation: leds: Fix a typo leds: ss4200: Fix incorrect placement of __initdata leds: clevo-mail: Fix incorrect placement of __initdata ...
| * leds: wm831x-status: Request a REG resourceMark Brown2013-08-301-2/+2
| | | | | | | | | | | | | | | | | | | | The wm831x-status driver was not converted to use a REG resource when they were introduced and the rest of the wm831x drivers converted, causing it to fail to probe due to requesting the wrong resource type. Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org # v3.7+ Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: trigger: ledtrig-backlight: Fix invalid memory access in fb_event ↵Manfred Schlaegl2013-08-271-14/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | notification callback fb_notifier_callback is called on any event fired by fb_notifier_call_chain. Events may, or may not contain some data (fb_event.data). In case of FB_EVENT_BLANK fb_event.data contains a pointer to an integer holdingthe blank state. The Problem is, that in ledtrig-backlight.c - fb_notifier_callback the pointer to blank state is dereferenced BEFORE the event-type is checked. Obviously this leads to problems with other events than FB_EVENT_BLANK, where fb_event.data is undefined or NULL. It seems, that this problem existed ever since the driver was added. Like in drivers/video/backlight/backlight.c line 43 I would suggest to return immediately on events other than FB_EVENT_BLANK. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds-pca963x: Fix device tree parsingRicardo Ribalda Delgado2013-08-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | A malformed device tree could lead into a segmentation fault if the reg value of a led is bigger than the number of leds. A valid device tree could have only information about the last led of the chip. Fix the device tree parsing to handle those cases. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds-pca9633: Rename to leds-pca963xRicardo Ribalda Delgado2013-08-273-146/+146
| | | | | | | | | | | | | | | | The driver now supports the chips pca9633 and pca9634, therefore we rename the files to more generic and meaningul names Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds-pca9633: Add mutex to the ledout registerRicardo Ribalda Delgado2013-08-271-31/+55
| | | | | | | | | | | | | | | | | | | | | | | | To update an LED a register has to be read, updated and writen. If another LED whas been updated at the same time, this could lead into wrong updates. This patch adds a common mutex to all the leds of the same chip to protect the ledout register. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds-pca9633: Unique naming of the LEDsRicardo Ribalda Delgado2013-08-271-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If there is more than one pca963x chips on the system and there are some LEDs without platform_data names, the driver wont be able to provide unique naming to them. This will cause led_class_dev_register to fail, unregistering all the LEDs of the chip. This patch adds the i2c address to the name of the unnamed LEDs, making them unique. [ 555.346827] ------------[ cut here ]------------ [ 555.346844] WARNING: at /build/linux-voe0Su/linux-3.9.8/fs/sysfs/dir.c:536 sysfs_add_one+0x8b/0x9d() [ 555.346847] Hardware name: QT5022 [ 555.346850] sysfs: cannot create duplicate filename '/class/leds/pca9633:6' [ 555.346853] Modules linked in: qt5038_platform(O+) leds_pca9633(O) hid_generic ledtrig_default_on rfcomm bnep bluetooth binfmt_misc nfsd auth_rpcgss nfs_acl nfs lockd dns_resolver fscache sunrpc nls_utf8 nls_cp437 vfat fat loop fuse joydev hid_multitouch usbhid hid acpi_cpufreq mperf kvm_amd kvm evdev pn533 nfc arc4 microcode pcspkr efivars k10temp ath9k ath9k_common ath9k_hw ath fglrx(PO) mac80211 cfg80211 video rfkill processor thermal_sys sp5100_tco button i2c_piix4 ext4 crc16 jbd2 mbcache sg sd_mod crc_t10dif ahci libahci igb i2c_algo_bit i2c_core dca ptp pps_core ehci_pci ohci_hcd ehci_hcd libata usbcore usb_common scsi_mod [last unloaded: leds_pca963x] [ 555.346940] Pid: 4766, comm: insmod Tainted: P W O 3.9-1-amd64 #1 Debian 3.9.8-1 [ 555.346943] Call Trace: [ 555.346956] [<ffffffff8103d153>] ? warn_slowpath_common+0x76/0x8c [ 555.346962] [<ffffffff8103d202>] ? warn_slowpath_fmt+0x47/0x49 [ 555.346968] [<ffffffff8116005d>] ? sysfs_pathname+0x3b/0x41 [ 555.346973] [<ffffffff81160767>] ? sysfs_add_one+0x8b/0x9d [ 555.346978] [<ffffffff811610a4>] ? sysfs_do_create_link_sd+0xe8/0x174 [ 555.346985] [<ffffffff81279250>] ? device_add+0x243/0x5ab [ 555.346991] [<ffffffff81060a16>] ? complete_all+0x31/0x40 [ 555.346998] [<ffffffff8104991a>] ? init_timer_key+0xc/0x56 [ 555.347004] [<ffffffff8127964c>] ? device_create_vargs+0x82/0xb6 [ 555.347009] [<ffffffff812796af>] ? device_create+0x2f/0x31 [ 555.347014] [<ffffffff81060add>] ? should_resched+0x5/0x23 [ 555.347021] [<ffffffff812a3a92>] ? led_classdev_register+0x24/0x103 [ 555.347028] [<ffffffffa09d01c0>] ? pca9633_probe+0x173/0x239 [leds_pca9633] [ 555.347035] [<ffffffff8127b504>] ? __driver_attach+0x73/0x73 [ 555.347049] [<ffffffffa009dfc9>] ? i2c_device_probe+0x63/0x88 [i2c_core] [ 555.347057] [<ffffffff8127b373>] ? driver_probe_device+0x92/0x1b0 [ 555.347064] [<ffffffff81279c5c>] ? bus_for_each_drv+0x43/0x7d [ 555.347070] [<ffffffff8127b2af>] ? device_attach+0x68/0x83 [ 555.347078] [<ffffffff8127a990>] ? bus_probe_device+0x25/0x8d [ 555.347083] [<ffffffff812793f7>] ? device_add+0x3ea/0x5ab [ 555.347088] [<ffffffff81060a16>] ? complete_all+0x31/0x40 [ 555.347094] [<ffffffff8104991a>] ? init_timer_key+0xc/0x56 [ 555.347104] [<ffffffffa009d3a1>] ? i2c_new_device+0x10d/0x179 [i2c_core] [ 555.347112] [<ffffffffa008f036>] ? qt5038_init+0x36/0x1000 [qt5038_platform] [ 555.347119] [<ffffffffa008f000>] ? 0xffffffffa008efff [ 555.347125] [<ffffffff8100209e>] ? do_one_initcall+0x74/0x128 [ 555.347131] [<ffffffffa008f000>] ? 0xffffffffa008efff [ 555.347137] [<ffffffff810836f5>] ? load_module+0x1af7/0x1dfc [ 555.347144] [<ffffffff810801c5>] ? free_notes_attrs+0x3c/0x3c [ 555.347150] [<ffffffff81083a98>] ? sys_init_module+0x9e/0xab [ 555.347157] [<ffffffff8138be29>] ? system_call_fastpath+0x16/0x1b [ 555.347161] ---[ end trace ad00b85794e0de4d ]--- [ 555.347448] leds-pca9633: probe of 0-006b failed with error -17 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds-pca9633: Add support for PCA9634Ricardo Ribalda Delgado2013-08-272-36/+79
| | | | | | | | | | | | | | | | Add support for PCA9634 chip, which belongs to the same family as the 9633 but with support for 8 outputs instead of 4. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: lp5562: use LP55xx common macros for device attributesMilo Kim2013-08-271-2/+2
| | | | | | | | | | Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: lp5523: remove unnecessary writing commandsMilo Kim2013-08-271-11/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reduces the number of programming commands. (Count of sending commands) Old code: 32 + program size (32 counts for clearing program memory) New code: 32 Pattern buffer is initialized to 0 in this function. Just update new program data and remaining buffers are filled with 0. So it's needless to clear whole area. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: lp5523: restore legacy device attributesMilo Kim2013-08-271-4/+223
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git commit db6eaf8388a413a5ee1b4547ce78506b9c6456b0 (leds-lp5523: use generic firmware interface) causes an application conflict. This interface should be maintained for compatibility. Restored device attributes are 'engineN_mode', 'engineN_load' and 'engineN_leds'. (N = 1, 2 or 3) A 'selftest' attribute macro is replaced with LP55xx common macro. Those are accessed when a LED pattern is run by an application. Use a mutex in lp5523_update_program_memory() : This function is called when an user-application writes a 'engineN_load' file or pattern data is loaded from generic firmware interface. So, writing program memory should be protected. If an error occurs on accessing this area, just it returns as -EINVAL quickly. This error code is exact same as old driver function, lp5523_do_store_load() because it should be kept for an user-application compatibility. Even the driver is changed, we can use the application without re-compiling sources. Reported-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: lp5523: LED MUX configuration on initializingMilo Kim2013-08-271-1/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LED MUX start and stop address should be updated in the program memory on LP5523 initialization. LED pattern doesn't work without additional MUX address configuration. This handling is done by new function, lp5523_init_program_engine(). Eventually, it's called during device initialization, lp5523_post_init_device(). This is a conflict after git commit 632418bf65503405df3f9a6a1616f5a95f91db85 (leds-lp5523: clean up lp5523_configure()). So it should be fixed. Cc: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: lp5523: make separate API for loading engineMilo Kim2013-08-271-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lp5523_load_engine() It is called whenever the operation mode is changed to 'load'. It is used for simple operation mode change. It will be used when engine mode and LED selection is updated in later patch. lp5523_load_engine_and_select_page() Change the operation mode to 'load' and select program page number. This is used for programming a LED pattern at a time. So load_engine() is replaced with new API, load_engine_and_select_page() in lp5523_firmware_loaded(). Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: lp5521: remove unnecessary writing commandsMilo Kim2013-08-271-11/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reduces the number of programming commands. (Count of sending commands) Old code: 32 + program size (32 counts for clearing program memory) New code: 32 Pattern buffer is initialized to 0 in this function. Just update new program data and remaining buffers are filled with 0. So it's needless to clear whole area. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: lp5521: restore legacy device attributesMilo Kim2013-08-271-4/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git commit 9ce7cb170f97f83a78dc948bf7d25690f15e1328 may cause an application confict, engineN_mode and engineN_load. This interface should be maintained for compatibility. Restored device attributes are 'engineN_mode' and 'engineN_load'. A 'selftest' attribute macro is replaced with LP55xx common macro. Use a mutex in lp5521_update_program_memory() : This function is called when an user-application writes a 'engineN_load' file or pattern data is loaded from generic firmware interface. So, writing program memory should be protected. If an error occurs on accessing this area, just it returns as -EINVAL quickly. This error code is exact same as old driver function, lp5521_do_store_load() because it should be kept for an user-application compatibility. Even the driver is changed, we can use the application without re-compiling sources. 'led_pattern' attribute is not included : engineN_mode and _load were created for custom user-application. 'led_pattern' is an exception. I added this attribute not for custom application but for simple test. Now it is used only in LP5562 driver, not LP5521. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: lp55xx: add common macros for device attributesMilo Kim2013-08-271-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides common macros for LP5521 and LP5523 device attributes and functions. (Device attributes) LP5521: 'mode', 'load' and 'selftest' LP5523: 'mode', 'load', 'leds' and 'selftest' (Permissions) mode: R/W load: Write-only leds: R/W selftest: Read-only Couple of lines are duplicate, so use these macros for adding device attributes in LP5521 and LP5523 drivers. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: lp55xx: add common data structure for programMilo Kim2013-08-271-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | LP55xx family devices have internal three program engines which are used for loading LED patterns. To maintain legacy device attributes, specific data structure is used, 'mode' and 'led_mux'. The mode is used for showing/storing current engine mode such like disabled, load and run. Then led_mux is used for showing/storing current output LED selection. This is only for LP5523/55231. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: ss4200: Fix incorrect placement of __initdataSachin Kamat2013-08-271-1/+1
| | | | | | | | | | | | | | | | | | __initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Dave Hansen <dave@sr71.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: clevo-mail: Fix incorrect placement of __initdataSachin Kamat2013-08-271-1/+1
| | | | | | | | | | | | | | | | | | __initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Márton Németh <nm127@freemail.hu> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: leds-netxbig: depends on ARCH_KIRKWOODSimon Guinot2013-08-271-1/+1
| | | | | | | | | | | | | | | | | | | | With the DT conversion, the board Kconfig symbols MACH_ are going to be removed. In order to prepare this removal, this patch replaces alls the machines dependencies for leds-netxbig by ARCH_KIRKWOOD. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: leds-ns2: depends on ARCH_KIRKWOODSimon Guinot2013-08-271-4/+1
| | | | | | | | | | | | | | | | | | | | With the DT conversion, the board Kconfig symbols MACH_ are going to be removed. In order to prepare this removal, this patch replaces alls the machines dependencies for leds-ns2 by ARCH_KIRKWOOD. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: leds-lp3944, fix "sparse" warning "mixing different enum types"Antonio Ospite2013-08-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a warning from "sparse": drivers/leds/leds-lp3944.c:292:23: warning: mixing different enum types drivers/leds/leds-lp3944.c:292:23: int enum led_brightness versus drivers/leds/leds-lp3944.c:292:23: int enum lp3944_status Keeping track of LP3944_LED_STATUS_OFF and LP3944_LED_STATUS_ON only in lp3944_led_set_brightness() is OK, as the handling of DIM (blinking) mode[s] is in lp3944_led_set_blink(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: leds-ss4200: Staticize nasgpio_led_get_attr()Jingoo Han2013-08-271-1/+1
| | | | | | | | | | | | | | | | | | | | nasgpio_led_get_attr() is used only in this file. Fix the following sparse warning: drivers/leds/leds-ss4200.c:200:5: warning: symbol 'nasgpio_led_get_attr' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: use dev_get_platdata()Jingoo Han2013-08-2730-49/+52
| | | | | | | | | | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: pca9633: Add hardware blink supportMark A. Greer2013-08-271-4/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add hardware blinking support to the pca9633 driver. NOTE: Hardware blinking violates the leds infrastructure driver interface since the hardware only supports blinking all LEDs with the same delay_on/delay_off rates. That is, only the LEDs that are set to blink will actually blink but all LEDs that are set to blink will blink in identical fashion. The delay_on/delay_off values of the last LED that is set to blink will be used for all of the blinking LEDs. If the hardware doesn't support the requested blinking pattern, a default of 500ms on and off will be used. Hardware blinking is disabled by default but can be enabled by setting the 'blink_type' member in the platform_data struct to 'PCA9633_HW_BLINK' or by adding the 'nxp,hw-blink' property to the DTS. (fengguang.wu@intel.com: Removes unneeded semicolon.) Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: support new LP8501 device - another LP55xx commonKim, Milo2013-08-274-3/+429
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LP8501 can drive up to 9 channels like LP5523. LEDs can be controlled directly via the I2C and programmable engines are supported. LP55xx common driver LP8501 is one of LP55xx family device, so LP55xx common code are used. Chip specific data is defined in the structure, 'lp55xx_device_config'. Differences between LP8501 and LP5523 Different register layout for LED output control and others. LP8501 specific feature for separate output power selection. LP8501 doesn't support external clock detection. Different programming engine data. LP8501 specific feature - output power selection Output channels are selected by power selection - Vout or Vdd. Separate power for VDD1-6 and VDD7-9 are available. It is configurable in the platform data. To support this feature, LP55xx DT structure and header are changed. Device tree binding is updated as well. LED pattern data Example pattern data is updated in the driver documentation. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * leds: Add device tree binding for pca9633Tony Lindgren2013-08-271-0/+71
| | | | | | | | | | | | | | | | | | | | Similar to tca6507, we can just parse the standard LED properties for pca9633. Tested on a pca9632, which is compatible with pca9633. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* | Merge tag 'boards-for-linus' of ↵Linus Torvalds2013-09-063-350/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board updates from Olof Johansson: "Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches, but most of this is around legacy code and board support. We've found that platform maintainers have a hard time separating all of these out and might move towards fewer branches for next release. - Removal of a number of Marvell Kirkwood board files, since contents is now common and mostly configured via DT. - Device-tree updates for Marvell Dove, including irqchip and clocksource setup. - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager. - New backlight drivers for backlights used on Renesas shmobile platforms. - Removal of Renesas leds driver. - Shuffling of some of the new Broadcom platforms to give room for others in the same mach directory. More in 3.13" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion ARM: bcm: Make secure API call optional ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers) ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona ARM: bcm: Rename board_bcm mmc: sdhci-bcm-kona: make linker-section warning go away ARM: tegra: defconfig updates ARM: dove: add initial DT file for Globalscale D2Plug ARM: dove: add GPIO IR receiver node to SolidRun CuBox ARM: dove: add common pinmux functions to DT ARM: dove: add cpu device tree node ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument ARM: kirkwood: fix DT building and update defconfig ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code ARM: configs: disable DEBUG_LL in bcm_defconfig ARM: bcm281xx: Board specific reboot code ARM bcm281xx: Turn on socket & network support. ARM: bcm281xx: Turn on L2 cache. ...
| * | leds: Remove leds-renesas-tpu driverLaurent Pinchart2013-07-223-350/+0
| |/ | | | | | | | | | | | | | | | | The driver is superseded by the generic pwm-renesas-tpu driver used with leds-pwm. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* / leds: convert class code to use dev_groupsGreg Kroah-Hartman2013-07-271-8/+30
|/ | | | | | | | | | The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the led class code to use the correct field. Acked-by: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* leds: mc13783: Fix "uninitialized variable" warningAlexander Shiyan2013-07-021-1/+1
| | | | | | | | drivers/leds/leds-mc13783.c: In function 'mc13xxx_led_probe': drivers/leds/leds-mc13783.c:195:2: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: Convert led class driver from legacy pm ops to dev_pm_opsShuah Khan2013-06-211-3/+7
| | | | | | | | | | | Convert drivers/leds/led-class to use dev_pm_ops for power management and remove Legacy PM ops hooks. With this change, led class registers suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy class->suspend/resume. When __device_suspend() runs call-backs, it will find class->pm ops for the led class. Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: leds-mc13783: Add MC13892 LED supportAlexander Shiyan2013-06-212-4/+62
| | | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Tested-by: Philippe Retornaz <philippe.retornaz@epfl.ch> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: leds-mc13783: Prepare driver to support MC13892 LEDsAlexander Shiyan2013-06-211-250/+156
| | | | | | | | | | | This patch rewrite driver code to be ready to add support for MC13892 LEDs and probe from devicetree. (cooloney@gmail.com: fix one coding style issue when apply this patch) Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Tested-by: Philippe Retornaz <philippe.retornaz@epfl.ch> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: renesas-tpu: cleanup a small type issueDan Carpenter2013-06-211-4/+4
| | | | | | | | | | | | | Static checkers complain that, although this is declared as an unsigned long, we can only use the lower 32 bits. For anything higher, we hit bugs widening then bitwise negate or wrapping bugs doing the left shift. From looking at the context, this is not a problem because we only use 16 bits. I've changed some types to make it more clear. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: use platform_{get,set}_drvdata()Jingoo Han2013-06-213-4/+4
| | | | | | | | | Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: leds-gpio: Let device core handle pinctrlFabio Estevam2013-06-211-6/+0
| | | | | | | | | | Since commit ab78029 (drivers/pinctrl: grab default handles from device core) we can rely on device core for handling pinctrl, so remove devm_pinctrl_get_select_default() from the driver. Reported-by: Stephen Warren <warren@wwwdotorg.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: lp5562: Properly setup of_device_id tableAxel Lin2013-06-211-1/+10
| | | | | | | | Don't mix of_device_id entry in i2c_device_id table. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: lp5523: Properly setup of_device_id tableAxel Lin2013-06-211-1/+10
| | | | | | | | Don't mix of_device_id entry in i2c_device_id table. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: lp5521: Properly setup of_device_id tableAxel Lin2013-06-211-1/+9
| | | | | | | | Don't mix of_device_id entry in i2c_device_id table. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: lp5562: support the device tree featureKim, Milo2013-06-211-5/+14
| | | | | | | | | | | | | | The LP55xx DT structure is applicable to the LP5562 device. The driver and documentation are updated. Compatible property of the DT : LP5521 and LP5223 were manufactured by National Semiconductor. LP5562 is a new device from Texas Instruments. Cc: Gabriel Fernandez <gabriel.fernandez@stericsson.com> Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* leds: lp55xx: support dynamic channel settings in the device tree structureKim, Milo2013-06-211-35/+26
| | | | | | | | | | | | | | | | | | | Currently, the LP55xx DT structure supports max 3 channels. However, LP5523 has max 9 channels and LP5562 has 4 channels. To enhance this constraint, the DT structure has been changed. (a) Use the child node for various channel settings instead of fixed array (b) Remove 'num_channel' property. This value can be retrieved by counting the children node. (c) 'chan-name' property supported (d) Documentation updates for LP5521 and LP5523 (cooloney@gmail.com: fix a coding style issue in leds-lp55xx.txt) Cc: Gabriel Fernandez <gabriel.fernandez@stericsson.com> Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>