summaryrefslogtreecommitdiffstats
path: root/drivers/md/dm.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* blk: Ensure users for current->bio_list can see the full list.NeilBrown2017-03-111-13/+16
| | | | | | | | | | | | | | | | | | | Commit 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()") changed current->bio_list so that it did not contain *all* of the queued bios, but only those submitted by the currently running make_request_fn. There are two places which walk the list and requeue selected bios, and others that check if the list is empty. These are no longer correct. So redefine current->bio_list to point to an array of two lists, which contain all queued bios, and adjust various code to test or walk both lists. Signed-off-by: NeilBrown <neilb@suse.com> Fixes: 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()") Signed-off-by: Jens Axboe <axboe@fb.com>
* sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar2017-03-021-0/+1
| | | | | | | | | | | | | <linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge tag 'dm-4.11-changes' of ↵Linus Torvalds2017-02-211-0/+55
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Fix dm-raid transient device failure processing and other smaller tweaks. - Add journal support to the DM raid target to close the 'write hole' on raid 4/5/6. - Fix dm-cache corruption, due to rounding bug, when cache exceeds 2TB. - Add 'metadata2' feature to dm-cache to separate the dirty bitset out from other cache metadata. This improves speed of shutting down a large cache device (which implies writing out dirty bits). - Fix a memory leak during dm-stats data structure destruction. - Fix a DM multipath round-robin path selector performance regression that was caused by less precise balancing across all paths. - Lastly, introduce a DM core fix for a long-standing DM snapshot deadlock that is rooted in the complexity of the device stack used in conjunction with block core maintaining bios on current->bio_list to manage recursion in generic_make_request(). A more comprehensive fix to block core (and its hook in the cpu scheduler) would be wonderful but this DM-specific fix is pragmatic considering how difficult it has been to make progress on a generic fix. * tag 'dm-4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits) dm: flush queued bios when process blocks to avoid deadlock dm round robin: revert "use percpu 'repeat_count' and 'current_path'" dm stats: fix a leaked s->histogram_boundaries array dm space map metadata: constify dm_space_map structures dm cache metadata: use cursor api in blocks_are_clean_separate_dirty() dm persistent data: add cursor skip functions to the cursor APIs dm cache metadata: use dm_bitset_new() to create the dirty bitset in format 2 dm bitset: add dm_bitset_new() dm cache metadata: name the cache block that couldn't be loaded dm cache metadata: add "metadata2" feature dm cache metadata: use bitset cursor api to load discard bitset dm bitset: introduce cursor api dm btree: use GFP_NOFS in dm_btree_del() dm space map common: memcpy the disk root to ensure it's arch aligned dm block manager: add unlikely() annotations on dm_bufio error paths dm cache: fix corruption seen when using cache > 2TB dm raid: cleanup awkward branching in raid_message() option processing dm raid: use mddev rather than rdev->mddev dm raid: use read_disk_sb() throughout dm raid: add raid4/5/6 journaling support ...
| * dm: flush queued bios when process blocks to avoid deadlockMikulas Patocka2017-02-171-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit df2cb6daa4 ("block: Avoid deadlocks with bio allocation by stacking drivers") created a workqueue for every bio set and code in bio_alloc_bioset() that tries to resolve some low-memory deadlocks by redirecting bios queued on current->bio_list to the workqueue if the system is low on memory. However other deadlocks (see below **) may happen, without any low memory condition, because generic_make_request is queuing bios to current->bio_list (rather than submitting them). ** the related dm-snapshot deadlock is detailed here: https://www.redhat.com/archives/dm-devel/2016-July/msg00065.html Fix this deadlock by redirecting any bios on current->bio_list to the bio_set's rescue workqueue on every schedule() call. Consequently, when the process blocks on a mutex, the bios queued on current->bio_list are dispatched to independent workqueus and they can complete without waiting for the mutex to be available. The structure blk_plug contains an entry cb_list and this list can contain arbitrary callback functions that are called when the process blocks. To implement this fix DM (ab)uses the onstack plug's cb_list interface to get its flush_current_bio_list() called at schedule() time. This fixes the snapshot deadlock - if the map method blocks, flush_current_bio_list() will be called and it redirects bios waiting on current->bio_list to appropriate workqueues. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1267650 Depends-on: df2cb6daa4 ("block: Avoid deadlocks with bio allocation by stacking drivers") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* | dm: don't allow ioctls to targets that don't map to whole devicesChristoph Hellwig2017-02-041-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | .. at least for unprivileged users. Before we called into the SCSI ioctl code to allow excemptions for a few SCSI passthrough ioctls, but this is pretty unsafe and except for this call dm knows nothing about SCSI ioctls. As the SCSI ioctl code is now optional, we really don't want to drag it in for DM, and the exception is not very useful anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
* | block: Use pointer to backing_dev_info from request_queueJan Kara2017-02-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | We will want to have struct backing_dev_info allocated separately from struct request_queue. As the first step add pointer to backing_dev_info to request_queue and convert all users touching it. No functional changes in this patch. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
* | dm: always defer request allocation to the owner of the request_queueChristoph Hellwig2017-01-271-23/+7
|/ | | | | | | | | | | | | | | DM already calls blk_mq_alloc_request on the request_queue of the underlying device if it is a blk-mq device. But now that we allow drivers to allocate additional data and initialize it ahead of time we need to do the same for all drivers. Doing so and using the new cmd_size infrastructure in the block layer greatly simplifies the dm-rq and mpath code, and should also make arbitrary combinations of SQ and MQ devices with SQ or MQ device mapper tables easily possible as a further step. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* Merge tag 'dm-4.10-changes' of ↵Linus Torvalds2016-12-141-3/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - various fixes and improvements to request-based DM and DM multipath - some locking improvements in DM bufio - add Kconfig option to disable the DM block manager's extra locking which mainly serves as a developer tool - a few bug fixes to DM's persistent-data - a couple changes to prepare for multipage biovec support in the block layer - various improvements and cleanups in the DM core, DM cache, DM raid and DM crypt - add ability to have DM crypt use keys from the kernel key retention service - add a new "error_writes" feature to the DM flakey target, reads are left unchanged in this mode * tag 'dm-4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (40 commits) dm flakey: introduce "error_writes" feature dm cache policy smq: use hash_32() instead of hash_32_generic() dm crypt: reject key strings containing whitespace chars dm space map: always set ev if sm_ll_mutate() succeeds dm space map metadata: skip useless memcpy in metadata_ll_init_index() dm space map metadata: fix 'struct sm_metadata' leak on failed create Documentation: dm raid: define data_offset status field dm raid: fix discard support regression dm raid: don't allow "write behind" with raid4/5/6 dm mpath: use hw_handler_params if attached hw_handler is same as requested dm crypt: add ability to use keys from the kernel key retention service dm array: remove a dead assignment in populate_ablock_with_values() dm ioctl: use offsetof() instead of open-coding it dm rq: simplify use_blk_mq initialization dm: use blk_set_queue_dying() in __dm_destroy() dm bufio: drop the lock when doing GFP_NOIO allocation dm bufio: don't take the lock in dm_bufio_shrink_count dm bufio: avoid sleeping while holding the dm_bufio lock dm table: simplify dm_table_determine_type() dm table: an 'all_blk_mq' table must be loaded for a blk-mq DM device ...
| * dm: use blk_set_queue_dying() in __dm_destroy()Bart Van Assche2016-12-081-3/+1
| | | | | | | | | | | | | | | | | | | | After QUEUE_FLAG_DYING has been set any code that is waiting in get_request() should be woken up. But to get this behaviour blk_set_queue_dying() must be used instead of only setting QUEUE_FLAG_DYING. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* | Merge branch 'for-4.10/block' of git://git.kernel.dk/linux-blockLinus Torvalds2016-12-131-2/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block layer updates from Jens Axboe: "This is the main block pull request this series. Contrary to previous release, I've kept the core and driver changes in the same branch. We always ended up having dependencies between the two for obvious reasons, so makes more sense to keep them together. That said, I'll probably try and keep more topical branches going forward, especially for cycles that end up being as busy as this one. The major parts of this pull request is: - Improved support for O_DIRECT on block devices, with a small private implementation instead of using the pig that is fs/direct-io.c. From Christoph. - Request completion tracking in a scalable fashion. This is utilized by two components in this pull, the new hybrid polling and the writeback queue throttling code. - Improved support for polling with O_DIRECT, adding a hybrid mode that combines pure polling with an initial sleep. From me. - Support for automatic throttling of writeback queues on the block side. This uses feedback from the device completion latencies to scale the queue on the block side up or down. From me. - Support from SMR drives in the block layer and for SD. From Hannes and Shaun. - Multi-connection support for nbd. From Josef. - Cleanup of request and bio flags, so we have a clear split between which are bio (or rq) private, and which ones are shared. From Christoph. - A set of patches from Bart, that improve how we handle queue stopping and starting in blk-mq. - Support for WRITE_ZEROES from Chaitanya. - Lightnvm updates from Javier/Matias. - Supoort for FC for the nvme-over-fabrics code. From James Smart. - A bunch of fixes from a whole slew of people, too many to name here" * 'for-4.10/block' of git://git.kernel.dk/linux-block: (182 commits) blk-stat: fix a few cases of missing batch flushing blk-flush: run the queue when inserting blk-mq flush elevator: make the rqhash helpers exported blk-mq: abstract out blk_mq_dispatch_rq_list() helper blk-mq: add blk_mq_start_stopped_hw_queue() block: improve handling of the magic discard payload blk-wbt: don't throttle discard or write zeroes nbd: use dev_err_ratelimited in io path nbd: reset the setup task for NBD_CLEAR_SOCK nvme-fabrics: Add FC LLDD loopback driver to test FC-NVME nvme-fabrics: Add target support for FC transport nvme-fabrics: Add host support for FC transport nvme-fabrics: Add FC transport LLDD api definitions nvme-fabrics: Add FC transport FC-NVME definitions nvme-fabrics: Add FC transport error codes to nvme.h Add type 0x28 NVME type code to scsi fc headers nvme-fabrics: patch target code in prep for FC transport support nvme-fabrics: set sqe.command_id in core not transports parser: add u64 number parser nvme-rdma: align to generic ib_event logging helper ...
| * block: bio: pass bvec table to bio_init()Ming Lei2016-11-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some drivers often use external bvec table, so introduce this helper for this case. It is always safe to access the bio->bi_io_vec in this way for this case. After converting to this usage, it will becomes a bit easier to evaluate the remaining direct access to bio->bi_io_vec, so it can help to prepare for the following multipage bvec support. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Fixed up the new O_DIRECT cases. Signed-off-by: Jens Axboe <axboe@fb.com>
| * block,fs: use REQ_* flags directlyChristoph Hellwig2016-11-011-1/+1
| | | | | | | | | | | | | | | | | | Remove the WRITE_* and READ_SYNC wrappers, and just use the flags directly. Where applicable this also drops usage of the bio_set_op_attrs wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
* | Merge tag 'dm-4.9-fixes' of ↵Linus Torvalds2016-10-281-2/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a couple DM raid and DM mirror fixes - a couple .request_fn request-based DM NULL pointer fixes - a fix for a DM target reference count leak, on target load error, that prevented associated DM target kernel module(s) from being removed * tag 'dm-4.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm table: fix missing dm_put_target_type() in dm_table_add_target() dm rq: clear kworker_task if kthread_run() returned an error dm: free io_barrier after blk_cleanup_queue call dm raid: fix activation of existing raid4/10 devices dm mirror: use all available legs on multiple failures dm mirror: fix read error on recovery after default leg failure dm raid: fix compat_features validation
| * dm: free io_barrier after blk_cleanup_queue callTahsin Erdogan2016-10-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | dm_old_request_fn() has paths that access md->io_barrier. The party destroying io_barrier should ensure that no future execution of dm_old_request_fn() is possible. Move io_barrier destruction to below blk_cleanup_queue() to ensure this and avoid a NULL pointer crash during request-based DM device shutdown. Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* | kthread: kthread worker API cleanupPetr Mladek2016-10-121-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A good practice is to prefix the names of functions by the name of the subsystem. The kthread worker API is a mix of classic kthreads and workqueues. Each worker has a dedicated kthread. It runs a generic function that process queued works. It is implemented as part of the kthread subsystem. This patch renames the existing kthread worker API to use the corresponding name from the workqueues API prefixed by kthread_: __init_kthread_worker() -> __kthread_init_worker() init_kthread_worker() -> kthread_init_worker() init_kthread_work() -> kthread_init_work() insert_kthread_work() -> kthread_insert_work() queue_kthread_work() -> kthread_queue_work() flush_kthread_work() -> kthread_flush_work() flush_kthread_worker() -> kthread_flush_worker() Note that the names of DEFINE_KTHREAD_WORK*() macros stay as they are. It is common that the "DEFINE_" prefix has precedence over the subsystem names. Note that INIT() macros and init() functions use different naming scheme. There is no good solution. There are several reasons for this solution: + "init" in the function names stands for the verb "initialize" aka "initialize worker". While "INIT" in the macro names stands for the noun "INITIALIZER" aka "worker initializer". + INIT() macros are used only in DEFINE() macros + init() functions are used close to the other kthread() functions. It looks much better if all the functions use the same scheme. + There will be also kthread_destroy_worker() that will be used close to kthread_cancel_work(). It is related to the init() function. Again it looks better if all functions use the same naming scheme. + there are several precedents for such init() function names, e.g. amd_iommu_init_device(), free_area_init_node(), jump_label_init_type(), regmap_init_mmio_clk(), + It is not an argument but it was inconsistent even before. [arnd@arndb.de: fix linux-next merge conflict] Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.com Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dm: convert wait loops to use autoremove_wake_function()Bart Van Assche2016-09-141-7/+3
| | | | | | | | | Use autoremove_wake_function() instead of default_wake_function() to make the dm wait loops more similar to other wait loops in the kernel. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: use signal_pending_state() in dm_wait_for_completion()Bart Van Assche2016-09-141-2/+1
| | | | | | | | | | Use signal_pending_state() instead of open-coding it. This patch does not change any functionality but makes it possible to pass TASK_KILLABLE as the second argument of dm_wait_for_completion(). See also commit 16882c1e962b ("sched: fix TASK_WAKEKILL vs SIGKILL race"). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: rename task state function argumentsBart Van Assche2016-09-141-5/+9
| | | | | | | | | Rename 'interruptible' into 'task_state' to make it clear that this argument is a task state instead of a boolean. Also, change type from int to long. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: add two lockdep_assert_held() statementsBart Van Assche2016-09-141-0/+4
| | | | | | | | Document the locking assumptions for the __bind() and __dm_suspend() functions. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: mark request_queue dead before destroying the DM deviceBart Van Assche2016-09-141-0/+5
| | | | | | | | | This avoids that new requests are queued while __dm_destroy() is in progress. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
* dm: return correct error code in dm_resume()'s retry loopMinfei Huang2016-09-141-3/+2
| | | | | | | | | | | | | dm_resume() will return success (0) rather than -EINVAL if !dm_suspended_md() upon retry within dm_resume(). Reset the error code at the start of dm_resume()'s retry loop. Also, remove a useless assignment at the end of dm_resume(). Fixes: ffcc393641 ("dm: enhance internal suspend and resume interface") Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Minfei Huang <mnghuan@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* block: rename bio bi_rw to bi_opfJens Axboe2016-08-071-5/+5
| | | | | | | | | | | | | Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
* dm: set DMF_SUSPENDED* _before_ clearing DMF_NOFLUSH_SUSPENDINGMike Snitzer2016-08-021-7/+7
| | | | | | | | | | | | | | Otherwise, there is potential for both DMF_SUSPENDED* and DMF_NOFLUSH_SUSPENDING to not be set during dm_suspend() -- which is definitely _not_ a valid state. This fix, in conjuction with "dm rq: fix the starting and stopping of blk-mq queues", addresses the potential for request-based DM multipath's __multipath_map() to see !dm_noflush_suspending() during suspend. Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
* Merge tag 'libnvdimm-for-4.8' of ↵Linus Torvalds2016-07-291-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: - Replace pcommit with ADR / directed-flushing. The pcommit instruction, which has not shipped on any product, is deprecated. Instead, the requirement is that platforms implement either ADR, or provide one or more flush addresses per nvdimm. ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers to the memory controller on a power-fail event. Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure: "Flush Hint Address Structure". A flush hint is an mmio address that when written and fenced assures that all previous posted writes targeting a given dimm have been flushed to media. - On-demand ARS (address range scrub). Linux uses the results of the ACPI ARS commands to track bad blocks in pmem devices. When latent errors are detected we re-scrub the media to refresh the bad block list, userspace can also request a re-scrub at any time. - Support for the Microsoft DSM (device specific method) command format. - Support for EDK2/OVMF virtual disk device memory ranges. - Various fixes and cleanups across the subsystem. * tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits) libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register" nfit: do an ARS scrub on hitting a latent media error nfit: move to nfit/ sub-directory nfit, libnvdimm: allow an ARS scrub to be triggered on demand libnvdimm: register nvdimm_bus devices with an nd_bus driver pmem: clarify a debug print in pmem_clear_poison x86/insn: remove pcommit Revert "KVM: x86: add pcommit support" nfit, tools/testing/nvdimm/: unify shutdown paths libnvdimm: move ->module to struct nvdimm_bus_descriptor nfit: cleanup acpi_nfit_init calling convention nfit: fix _FIT evaluation memory leak + use after free tools/testing/nvdimm: add manufacturing_{date|location} dimm properties tools/testing/nvdimm: add virtual ramdisk range acpi, nfit: treat virtual ramdisk SPA as pmem region pmem: kill __pmem address space pmem: kill wmb_pmem() libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes fs/dax: remove wmb_pmem() libnvdimm, pmem: flush posted-write queues on shutdown ...
* \ Merge tag 'dm-4.8-changes' of ↵Linus Torvalds2016-07-271-1126/+115
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - initially based on Jens' 'for-4.8/core' (given all the flag churn) and later merged with 'for-4.8/core' to pickup the QUEUE_FLAG_DAX commits that DM depends on to provide its DAX support - clean up the bio-based vs request-based DM core code by moving the request-based DM core code out to dm-rq.[hc] - reinstate bio-based support in the DM multipath target (done with the idea that fast storage like NVMe over Fabrics could benefit) -- while preserving support for request_fn and blk-mq request-based DM mpath - SCSI and DM multipath persistent reservation fixes that were coordinated with Martin Petersen. - the DM raid target saw the most extensive change this cycle; it now provides reshape and takeover support (by layering ontop of the corresponding MD capabilities) - DAX support for DM core and the linear, stripe and error targets - a DM thin-provisioning block discard vs allocation race fix that addresses potential for corruption - a stable fix for DM verity-fec's block calculation during decode - a few cleanups and fixes to DM core and various targets * tag 'dm-4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (73 commits) dm: allow bio-based table to be upgraded to bio-based with DAX support dm snap: add fake origin_direct_access dm stripe: add DAX support dm error: add DAX support dm linear: add DAX support dm: add infrastructure for DAX support dm thin: fix a race condition between discarding and provisioning a block dm btree: fix a bug in dm_btree_find_next_single() dm raid: fix random optimal_io_size for raid0 dm raid: address checkpatch.pl complaints dm: call PR reserve/unreserve on each underlying device sd: don't use the ALL_TG_PT bit for reservations dm: fix second blk_delay_queue() parameter to be in msec units not jiffies dm raid: change logical functions to actually return bool dm raid: use rdev_for_each in status dm raid: use rs->raid_disks to avoid memory leaks on free dm raid: support delta_disks for raid1, fix table output dm raid: enhance reshape check and factor out reshape setup dm raid: allow resize during recovery dm raid: fix rs_is_recovering() to allow for lvextend ...
| * | dm: add infrastructure for DAX supportToshi Kani2016-07-211-2/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change mapped device to implement direct_access function, dm_blk_direct_access(), which calls a target direct_access function. 'struct target_type' is extended to have target direct_access interface. This function limits direct accessible size to the dm_target's limit with max_io_len(). Add dm_table_supports_dax() to iterate all targets and associated block devices to check for DAX support. To add DAX support to a DM target the target must only implement the direct_access function. Add a new dm type, DM_TYPE_DAX_BIO_BASED, which indicates that mapped device supports DAX and is bio based. This new type is used to assure that all target devices have DAX support and remain that way after QUEUE_FLAG_DAX is set in mapped device. At initial table load, QUEUE_FLAG_DAX is set to mapped device when setting DM_TYPE_DAX_BIO_BASED to the type. Any subsequent table load to the mapped device must have the same type, or else it fails per the check in table_load(). Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
| * | dm: call PR reserve/unreserve on each underlying deviceChristoph Hellwig2016-07-181-15/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far we tried to rely on the SCSI 'all target ports' bit to register all path, but for many setups this didn't work properly as the different paths are seen as separate initiators to the target instead of multiple ports of the same initiator. Because of that we'll stop setting the 'all target ports' bit in SCSI, and let device mapper handle iterating over the device for each path and register them manually. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
| * | dm mpath: add optional "queue_mode" featureMike Snitzer2016-06-101-13/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow a user to specify an optional feature 'queue_mode <mode>' where <mode> may be "bio", "rq" or "mq" -- which corresponds to bio-based, request_fn rq-based, and blk-mq rq-based respectively. If the queue_mode feature isn't specified the default for the "multipath" target is still "rq" but if dm_mod.use_blk_mq is set to Y it'll default to mode "mq". This new queue_mode feature introduces the ability for each multipath device to have its own queue_mode (whereas before this feature all multipath devices effectively had to have the same queue_mode). This commit also goes a long way to eliminate the awkward (ab)use of DM_TYPE_*, the associated filter_md_type() and other relatively fragile and difficult to maintain code. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
| * | dm: move request-based code out to dm-rq.[hc]Mike Snitzer2016-06-101-1097/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add some seperation between bio-based and request-based DM core code. 'struct mapped_device' and other DM core only structures and functions have been moved to dm-core.h and all relevant DM core .c files have been updated to include dm-core.h rather than dm.h DM targets should _never_ include dm-core.h! [block core merge conflict resolution from Stephen Rothwell] Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
* | | block: get rid of bio_rw and READAChristoph Hellwig2016-07-211-1/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | These two are confusing leftover of the old world order, combining values of the REQ_OP_ and REQ_ namespaces. For callers that don't special case we mostly just replace bi_rw with bio_data_dir or op_is_write, except for the few cases where a switch over the REQ_OP_ values makes more sense. Any check for READA is replaced with an explicit check for REQ_RAHEAD. Also remove the READA alias for REQ_RAHEAD. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSHMike Christie2016-06-071-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | block, drivers: add REQ_OP_FLUSH operationMike Christie2016-06-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | This adds a REQ_OP_FLUSH operation that is sent to request_fn based drivers by the block layer's flush code, instead of sending requests with the request->cmd_flags REQ_FLUSH bit set. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | drivers: use req op accessorMike Christie2016-06-071-1/+1
| | | | | | | | | | | | | | | | | | | | The req operation REQ_OP is separated from the rq_flag_bits definition. This converts the block layer drivers to use req_op to get the op from the request struct. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | dm: use bio op accessorsMike Christie2016-06-071-4/+4
| | | | | | | | | | | | | | | | | | Separate the op from the rq_flag_bits and have dm set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | dm: pass dm stats data dir instead of bi_rwMike Christie2016-06-071-9/+12
|/ | | | | | | | | | | | | | | | | | | It looks like dm stats cares about the data direction (READ vs WRITE) and does not need the bio/request flags. Commands like REQ_FLUSH, REQ_DISCARD and REQ_WRITE_SAME are currently always set with REQ_WRITE, so the extra check for REQ_DISCARD in dm_stats_account_io is not needed. This patch has it use the bio and request data_dir helpers instead of accessing the bi_rw/cmd_flags directly. This makes the next patches that remove the operation from the cmd_flags and bi_rw easier, because we will no longer have the REQ_WRITE bit set for operations like discards. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* dm: remove unused mapped_device argument from free_tio()Mike Snitzer2016-05-051-6/+4
| | | | Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: fix dm_target_io leak if clone_bio() returns an errorMikulas Patocka2016-04-111-1/+3
| | | | | | | | | | | | | | Commit c80914e81ec5b08 ("dm: return error if bio_integrity_clone() fails in clone_bio()") changed clone_bio() such that if it does return error then the alloc_tio() created resources (both the bio that was allocated to be a clone and the containing dm_target_io struct) will leak. Fix this by calling free_tio() in __clone_and_map_data_bio()'s clone_bio() error path. Fixes: c80914e81ec5b08 ("dm: return error if bio_integrity_clone() fails in clone_bio()") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: fix rq_end_stats() NULL pointer in dm_requeue_original_request()Bryn M. Reeves2016-03-141-1/+1
| | | | | | | | | | | | | | | | | An "old" (.request_fn) DM 'struct request' stores a pointer to the associated 'struct dm_rq_target_io' in rq->special. dm_requeue_original_request(), previously named dm_requeue_unmapped_original_request(), called dm_unprep_request() to reset rq->special to NULL. But rq_end_stats() would go on to hit a NULL pointer deference because its call to tio_from_request() returned NULL. Fix this by calling rq_end_stats() _before_ dm_unprep_request() Signed-off-by: Bryn M. Reeves <bmr@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Fixes: e262f34741 ("dm stats: add support for request-based DM devices") Cc: stable@vger.kernel.org # 4.2+
* dm: return error if bio_integrity_clone() fails in clone_bio()Mike Snitzer2016-03-101-7/+20
| | | | | | | clone_bio() now checks if bio_integrity_clone() returned an error rather than just drop it on the floor. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: drop unnecessary assignment of md->queueBob Liu2016-03-101-6/+1
| | | | | | | | | | | md->queue and q are the same thing in dm_old_init_request_queue() and dm_mq_init_request_queue(). Also drop the temporary 'struct request_queue *q' in dm_old_init_request_queue(). Signed-off-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: reorder 'struct mapped_device' members to fix alignment and holesMike Snitzer2016-03-101-16/+18
| | | | | | | Saves 16 bytes by eliminating 4 4byte holes but more importantly: numerous members that crossed cachelines were fixed. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: remove dummy definition of 'struct dm_table'Mike Snitzer2016-03-101-11/+3
| | | | | | | Change the map pointer in 'struct mapped_device' from 'struct dm_table __rcu *' to 'void __rcu *' to avoid the need for the dummy definition. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: add 'dm_numa_node' module parameterMike Snitzer2016-03-101-8/+44
| | | | | | | | | | | Allows user to control which NUMA node the memory for DM device structures (e.g. mapped_device, request_queue, gendisk, blk_mq_tag_set) is allocated from. Defaults to NUMA_NO_NODE (-1). Allowable range is from -1 until the last online NUMA node id. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: allow immutable request-based targets to use blk-mq pduMike Snitzer2016-02-231-7/+26
| | | | | | | This will allow DM multipath to use a portion of the blk-mq pdu space for target data (e.g. struct dm_mpath_io). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: rename target's per_bio_data_size to per_io_data_sizeMike Snitzer2016-02-231-4/+4
| | | | | | Request-based DM will also make use of per_bio_data_size. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: distinquish old .request_fn (dm-old) vs dm-mq request-based DMMike Snitzer2016-02-231-49/+53
| | | | | | | | | | | Rename various methods to have either a "dm_old" or "dm_mq" prefix. Improve code comments to assist with understanding the duality of code that handles both "dm_old" and "dm_mq" cases. It is no much easier to quickly look at the code and _know_ that a given method is either 1) "dm_old" only 2) "dm_mq" only 3) common to both. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: remove support for stacking dm-mq on .request_fn device(s)Mike Snitzer2016-02-231-39/+16
| | | | | | | | | | | | | | Remove all fiddley code that propped up this support for a blk-mq request-queue ontop of all .request_fn devices. Testing has proven this niche request-based dm-mq mode to be buggy, when testing fault tolerance with DM multipath, and there is no point trying to preserve it. Should help improve efficiency of pure dm-mq code and make code maintenance less delicate. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: fix a couple locking issues with use of block interfacesMike Snitzer2016-02-231-7/+21
| | | | | | | | | | | | old_stop_queue() was checking blk_queue_stopped() without holding the q->queue_lock. dm_requeue_original_request() needed to check blk_queue_stopped(), with q->queue_lock held, before calling blk_mq_kick_requeue_list(). And a side-effect of that change is start_queue() must also call blk_mq_kick_requeue_list(). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: allocate blk_mq_tag_set rather than embed in mapped_deviceMike Snitzer2016-02-221-18/+27
| | | | | | | | The blk_mq_tag_set is only needed for dm-mq support. There is point wasting space in 'struct mapped_device' for non-dm-mq devices. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> # check kzalloc return
* dm: add 'dm_mq_nr_hw_queues' and 'dm_mq_queue_depth' module paramsMike Snitzer2016-02-221-2/+25
| | | | | | | | | | | | | | | | | Allow user to change these values via module params or sysfs. 'dm_mq_nr_hw_queues' defaults to 1 (max 32). 'dm_mq_queue_depth' defaults to 2048 (up from 64, which proved far too small under moderate sized workloads -- the dm-multipath device would continuously block waiting for tags (requests) to become available). The maximum is BLK_MQ_MAX_DEPTH (currently 10240). Keep in mind the total number of pre-allocated requests per request-based dm-mq device is 'dm_mq_nr_hw_queues' * 'dm_mq_queue_depth' (currently 2048). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 17:05:52 +0100