summaryrefslogtreecommitdiffstats
path: root/drivers/media/platform/Kconfig (follow)
Commit message (Collapse)AuthorAgeFilesLines
* media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driverNeil Armstrong2019-04-221-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Amlogic G12A SoC embeds a second CEC controller with a totally different design. The two controller can work in the same time since the CEC line can be set to two different pins on the two controllers. This second CEC controller is documented as "AO-CEC-B", thus the registers will be named "CECB_" to differentiate with the other AO-CEC driver. Unlike the other AO-CEC controller, this one takes the Oscillator clock as input and embeds a dual-divider to provide a precise 32768Hz clock for communication. This is handled by registering a clock in the driver. Unlike the other AO-CEC controller, this controller supports setting up to 15 logical addresses and supports the signal_free_time settings in the transmit function. Unfortunately, this controller does not support "monitor" mode. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: seco-cec: fix building with RC_CORE=mArnd Bergmann2019-04-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | I previously added an RC_CORE dependency here, but missed the corner case of CONFIG_VIDEO_SECO_CEC=y with CONFIG_RC_CORE=m, which still causes a link error: drivers/media/platform/seco-cec/seco-cec.o: In function `secocec_probe': seco-cec.c:(.text+0x1b8): undefined reference to `devm_rc_allocate_device' seco-cec.c:(.text+0x2e8): undefined reference to `devm_rc_register_device' drivers/media/platform/seco-cec/seco-cec.o: In function `secocec_irq_handler': seco-cec.c:(.text+0xa2c): undefined reference to `rc_keydown' Refine the dependency to disallow building the RC subdriver in this case. This is the same logic we apply in other drivers like it. Fixes: f27dd0ad6885 ("media: seco-cec: fix RC_CORE dependency") Cc: <stable@vger.kernel.org> # 5.1 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: Kconfig files: use the right help coding styleMauro Carvalho Chehab2019-03-201-36/+36
| | | | | | | | | | | Checkpatch wants to use 'help' instead of '---help---': WARNING: prefer 'help' over '---help---' for new help texts Let's change it globally at the media subsystem, as otherwise people would keep using the old way. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: platform: fix several typosMauro Carvalho Chehab2019-03-011-1/+1
| | | | | | | | | | | | | | | | Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Reviewed-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Houlong Wei <houlong.wei@mediatek.com> Reviewed-by: Yong Deng <yong.deng@magewell.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: soc_camera: Move to the staging treeSakari Ailus2019-02-181-1/+0
| | | | | | | | | The SoC camera framework has no functional drivers left, something that has not changed for years. Move the leftovers to the staging tree. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: seco-cec: fix RC_CORE dependencyArnd Bergmann2019-01-161-1/+1
| | | | | | | | | | | | | | | | | All other drivers that need RC_CORE have a dependency rather than using 'select', so we should do the same here to avoid circular dependencies as well as this warning about missing dependencies: WARNING: unmet direct dependencies detected for RC_CORE Depends on [n]: INPUT [=n] Selected by [y]: - VIDEO_SECO_RC [=y] && MEDIA_SUPPORT [=y] && CEC_PLATFORM_DRIVERS [=y] && VIDEO_SECO_CEC [=y] Fixes: daef95769b3a ("media: seco-cec: add Consumer-IR support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: platform: Add Aspeed Video Engine driverEddie James2018-12-121-0/+9
| | | | | | | | | | | | | | The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can capture and compress video data from digital or analog sources. With the Aspeed chip acting a service processor, the Video Engine can capture the host processor graphics output. Add a V4L2 driver to capture video data and compress it to JPEG images. Make the video frames available through the V4L2 streaming interface. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: sun6i: Add support for Allwinner CSI V3sYong Deng2018-11-231-0/+1
| | | | | | | | | | | | | Allwinner V3s SoC features a CSI module with parallel interface. This patch implement a v4l2 framework driver for it. Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Yong Deng <yong.deng@magewell.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: seco-cec: add Consumer-IR supportEttore Chimenti2018-11-221-0/+10
| | | | | | | | | | | | | Introduce support for Consumer-IR into seco-cec driver, as it shares the same interrupt for receiving messages. The device decodes RC5 signals only, defaults to hauppauge mapping. It will spawn an input interface using the RC framework (like CEC device). Signed-off-by: Ettore Chimenti <ek5.chimenti@gmail.com> Reviewed-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: add SECO cec driverEttore Chimenti2018-11-221-0/+12
| | | | | | | | | | | | | | | | | | | | This patch adds support to the CEC device implemented with a STM32 microcontroller in X86 SECO Boards, including UDOO X86. The communication is achieved via Braswell integrated SMBus (i2c-i801). The driver use direct access to the PCI addresses, due to the limitations of the specific driver in presence of ACPI calls. The basic functionalities are tested with success with cec-ctl and cec-compliance. Inspired by cros-ec-cec implementation, attaches to i915 driver cec-notifier. Signed-off-by: Ettore Chimenti <ek5.chimenti@gmail.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* Merge tag 'media/v4.20-1' of ↵Linus Torvalds2018-10-291-0/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new dvb frontend driver: lnbh29 - new sensor drivers: imx319 and imx 355 - some old soc_camera driver renames to avoid conflict with new drivers - new i.MX Pixel Pipeline (PXP) mem-to-mem platform driver - a new V4L2 frontend for the FWHT codec - several other improvements, bug fixes, code cleanups, etc * tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (289 commits) media: rename soc_camera I2C drivers media: cec: forgot to cancel delayed work media: vivid: Support 480p for webcam capture media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD media: vivid: Add 16-bit bayer to format list media: v4l2-tpg-core: Add 16-bit bayer media: pvrusb2: replace `printk` with `pr_*` media: venus: vdec: fix decoded data size media: cx231xx: fix potential sign-extension overflow on large shift media: dt-bindings: media: rcar_vin: add device tree support for r8a7744 media: isif: fix a NULL pointer dereference bug media: exynos4-is: make const array config_ids static media: cx23885: make const array addr_list static media: ivtv: make const array addr_list static media: bttv-input: make const array addr_list static media: cx18: Don't check for address of video_dev media: dw9807-vcm: Fix probe error handling media: dw9714: Remove useless error message media: dw9714: Fix error handling in probe function media: cec: name for RC passthrough device does not need 'RC for' ...
| * media: platform: video-mux: Register a subdev notifierSteve Longerbeam2018-10-041-0/+1
| | | | | | | | | | | | | | | | | | | | Parse neighbor remote devices on the video muxes input ports, add them to a subdev notifier, and register the subdev notifier for the video mux, by calling v4l2_async_register_fwnode_subdev(). Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
| * media: imx-pxp: add i.MX Pixel Pipeline driverPhilipp Zabel2018-09-111-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a V4L2 mem-to-mem scaler/CSC driver for the Pixel Pipeline (PXP) version found on i.MX6ULL SoCs. A similar variant is used on i.MX7D. Since this driver only uses the legacy pipeline, it should be reasonably easy to extend it to work with the older PXP versions found on i.MX6UL, i.MX6SX, i.MX6SL, i.MX28, and i.MX23. The driver supports scaling and colorspace conversion. There is currently no support for rotation, alpha-blending, and the LUTs. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* | media: platform: fix cros-ec-cec build errorRandy Dunlap2018-09-171-0/+2
|/ | | | | | | | | | | | Fix build when MFD_CROS_EC is not enabled but COMPILE_TEST=y. Fixes this build error: ERROR: "cros_ec_cmd_xfer_status" [drivers/media/platform/cros-ec-cec/cros-ec-cec.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* Merge tag 'mfd-next-4.19' of ↵Linus Torvalds2018-08-211-0/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver - Add ChromeOS EC CEC driver - Add ROHM BD71837 PMIC driver New Device Support: - Add support for Dialog Semi DA9063L PMIC variant to DA9063 - Add support for Intel Ice Lake to Intel-PLSS-PCI - Add support for X-Powers AXP806 to AXP20x New Functionality: - Add support for USB Charging to the ChromeOS Embedded Controller - Add support for HDMI CEC to the ChromeOS Embedded Controller - Add support for HDMI CEC to Intel HDMI - Add support for accessory detection to Madera devices - Allow individual pins to be configured via DT' wlf,csnaddr-pd - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp Fix-upsL - Trivial renaming/spelling fixes; cros_ec, da9063-* - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc - Transition to helper macros/functions; da9063-* - Constify; kempld-core - Improve error path/messages; wm8994-core - Disable IRQs locally instead of relying on USB subsystem; dln2 - Remove unused code; rave-sp - New exports; sec-core Bug Fixes: - Fix possible false I2C transaction error; arizona-core - Fix declared memory area size; hi655x-pmic - Fix checksum type; rave-sp - Fix incorrect default serial port configuration: rave-sp - Fix incorrect coherent DMA mask for sub-devices; sm501" * tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: madera: Add register definitions for accessory detect mfd: sm501: Set coherent_dma_mask when creating subdevices mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC mfd: bd71837: Core driver for ROHM BD71837 PMIC media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC mfd: sec-core: Export OF module alias table mfd: as3722: Disable auto-power-on when AC OK mfd: axp20x: Support AXP806 in I2C mode mfd: axp20x: Add self-working mode support for AXP806 dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts mfd: wm8994: Allow to configure Speaker Mode Pullup from dts mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it mfd: rave-sp: Add legacy watchdog ping command translation mfd: rave-sp: Add legacy EEPROM access command translation mfd: rave-sp: Initialize flow control and parity of the port mfd: rave-sp: Fix incorrectly specified checksum type mfd: rave-sp: Remove unused defines mfd: hi655x: Fix regmap area declared size for hi655x mfd: ti_am335x_tscadc: Fix struct clk memory leak ...
| * media: platform: cros-ec-cec: Fix dependency on MFD_CROS_ECArnd Bergmann2018-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without the MFD driver, we run into a link error: drivers/media/platform/cros-ec-cec/cros-ec-cec.o: In function `cros_ec_cec_transmit': cros-ec-cec.c:(.text+0x474): undefined reference to `cros_ec_cmd_xfer_status' drivers/media/platform/cros-ec-cec/cros-ec-cec.o: In function `cros_ec_cec_set_log_addr': cros-ec-cec.c:(.text+0x60b): undefined reference to `cros_ec_cmd_xfer_status' drivers/media/platform/cros-ec-cec/cros-ec-cec.o: In function `cros_ec_cec_adap_enable': cros-ec-cec.c:(.text+0x77d): undefined reference to `cros_ec_cmd_xfer_status' As we can compile-test all the dependency, the extra '| COMPILE_TEST' is not needed to get the build coverage, and we can simply turn MFD_CROS_EC into a hard dependency to make it build in all configurations. Fixes: cd70de2d356e ("media: platform: Add ChromeOS EC CEC driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * media: platform: Add ChromeOS EC CEC driverNeil Armstrong2018-07-131-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ChromeOS Embedded Controller can expose a CEC bus, this patch add the driver for such feature of the Embedded Controller. This driver is part of the cros-ec MFD and will be add as a sub-device when the feature bit is exposed by the EC. The controller will only handle a single logical address and handles all the messages retries and will only expose Success or Error. The controller will be tied to the HDMI CEC notifier by using the platform DMI Data and the i915 device name and connector name. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | media: Rename CAMSS driver pathTodor Tomov2018-08-021-1/+1
| | | | | | | | | | | | | | | | | | Support for camera subsystem on QComm MSM8996/APQ8096 is to be added so remove hardware version from CAMSS driver's path. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* | media: vicodec: add the virtual codec driverHans Verkuil2018-07-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | Add the virtual codec driver that uses the Fast Walsh Hadamard Transform. Keiichi Watanabe contributed the multiplanar support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Co-Developed-by: Keiichi Watanabe <keiichiw@chromium.org> Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* | media: v4l: rcar_fdp1: Enable compilation on Gen2 platformsLaurent Pinchart2018-07-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1d3897143815 ("[media] v4l: rcar_fdp1: add FCP dependency") fixed a compilation breakage when the optional VIDEO_RENESAS_FCP dependency is compiled as a module while the rcar_fdp1 driver is built in. As a side effect it disabled compilation on Gen2 by disallowing the valid combination ARCH_RENESAS && !VIDEO_RENESAS_FCP. Fix it by handling the dependency the same way the vsp1 driver did in commit 199946731fa4 ("[media] vsp1: clarify FCP dependency"). Fixes: 1d3897143815 ("[media] v4l: rcar_fdp1: add FCP dependency") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* | media: v4l: rcar_fdp1: Change platform dependency to ARCH_RENESASGeert Uytterhoeven2018-06-271-1/+1
|/ | | | | | | | | | | | | | | | | The Renesas Fine Display Processor driver is used on Renesas R-Car SoCs only. Since commit 9b5ba0df4ea4f940 ("ARM: shmobile: Introduce ARCH_RENESAS") is ARCH_RENESAS a more appropriate platform dependency than the legacy ARCH_SHMOBILE, hence use the former. This will allow to drop ARCH_SHMOBILE on ARM and ARM64 in the near future. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: m2m-deinterlace: Remove DMA_ENGINE dependencyEzequiel Garcia2018-05-281-1/+1
| | | | | | | | | The DMA engine subsystem provides stubs for drivers to build with !DMA_ENGINE. Drop the config dependency. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven2018-05-281-29/+14
| | | | | | | | | | | | | | | | | | | | | | | Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Note: - The various VIDEOBUF*DMA* symbols had to loose their dependencies on HAS_DMA, as they are selected by several individual drivers. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: vsp1: Drop OF dependency of VIDEO_RENESAS_VSP1Geert Uytterhoeven2018-05-261-1/+1
| | | | | | | | | | VIDEO_RENESAS_VSP1 depends on ARCH_RENESAS && OF. As ARCH_RENESAS implies OF, the latter can be dropped. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: v4l: cadence: Add Cadence MIPI-CSI2 RX driverMaxime Ripard2018-05-161-0/+1
| | | | | | | | | | | | | | | | | The Cadence CSI-2 RX Controller is an hardware block meant to be used as a bridge between a CSI-2 bus and pixel grabbers. It supports operating with internal or external D-PHY, with up to 4 lanes, or without any D-PHY. The current code only supports the latter case. It also support dynamic mapping of the CSI-2 virtual channels to the associated pixel grabbers, but that isn't allowed at the moment either. Acked-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: drivers: media: platform: make VIDEO_VIU depend on I2CAnders Roxell2018-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | Commit 7378f1149884 ("media: omap2: omapfb: allow building it with COMPILE_TEST") broke compilation without CONFIG_I2C selected. drivers/media/platform/fsl-viu.c: In function ‘viu_of_probe’: drivers/media/platform/fsl-viu.c:1452:7: error: implicit declaration of function ‘i2c_get_adapter’; did you mean ‘i2c_lock_adapter’? [-Werror=implicit-function-declaration] ad = i2c_get_adapter(0); ^~~~~~~~~~~~~~~ i2c_lock_adapter drivers/media/platform/fsl-viu.c:1452:5: warning: assignment makes pointer from integer without a cast [-Wint-conversion] ad = i2c_get_adapter(0); ^ drivers/media/platform/fsl-viu.c:1534:2: error: implicit declaration of function ‘i2c_put_adapter’; did you mean ‘i2c_lock_adapter’? [-Werror=implicit-function-declaration] i2c_put_adapter(ad); ^~~~~~~~~~~~~~~ i2c_lock_adapter Added I2C dependency in order to make all configurations work again. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: omap3isp: Allow it to build with COMPILE_TESTArnd Bergmann2018-04-201-4/+2
| | | | | | | | | | | | | There aren't much things required for it to build with COMPILE_TEST. It just needs to not compile the code that depends on arm-specific iommu implementation. Co-developed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: omap3isp: Enable driver compilation on ARM with COMPILE_TESTLaurent Pinchart2018-04-201-1/+4
| | | | | | | | | | | | | | The omap3isp driver can't be compiled on non-ARM platforms but has no compile-time dependency on OMAP. It however requires common clock framework support, which isn't provided by all ARM platforms. Drop the OMAP dependency when COMPILE_TEST is set and add ARM and COMMON_CLK dependencies. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cec_gpio: allow building CEC_GPIO with COMPILE_TESTMauro Carvalho Chehab2018-04-171-1/+1
| | | | | | | At least on i386, building with allyesconfig doesn't enable PREEMPT, causing cec_gpio to not build. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: fsl-viu: allow building it with COMPILE_TESTMauro Carvalho Chehab2018-04-171-1/+1
| | | | | | | | | There aren't many things that would be needed to allow it to build with compile test. Add the needed bits. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* Merge tag 'media/v4.17-1' of ↵Linus Torvalds2018-04-041-1/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new CEC pin injection code for testing purposes - DVB frontend cxd2099 promoted from staging - new platform driver for Sony cxd2880 DVB devices - new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x, tw9910.c - removal of unused cx18 and ivtv alsa mixers - the reneseas-ceu driver doesn't depend on soc_camera anymore and moved from staging - removed the mantis_vp3028 driver, unused since 2009 - s5p-mfc: add support for version 10 of the MSP - added a decoder for imon protocol - atomisp: lots of cleanups - imx074 and mt9t031: don't depend on soc_camera anymore, being promoted from staging - added helper functions to better support DVB I2C binding - lots of driver improvements and cleanups * tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits) media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd) media: fimc-capture: get rid of two warnings media: dvb-usb-v2: fix a missing dependency of I2C_MUX media: uvc: to the right check at uvc_ioctl_enum_framesizes() media: cec-core: fix a bug at cec_error_inj_write() media: tda9840: cleanup a warning media: tm6000: avoid casting just to print pointer address media: em28xx-input: improve error handling code media: zr364xx: avoid casting just to print pointer address media: vivid-radio-rx: add a cast to avoid a warning media: saa7134-alsa: don't use casts to print a buffer address media: solo6x10: get rid of an address space warning media: zoran: don't cast pointers to print them media: ir-kbd-i2c: change the if logic to avoid a warning media: ir-kbd-i2c: improve error handling code media: saa7134-input: improve error handling media: s2255drv: fix a casting warning media: ivtvfb: Cleanup some warnings media: videobuf-dma-sg: Fix a weird cast soc_camera: fix a weird cast on printk ...
| * media: sec: Remove PLAT_S5P dependencyUlf Magnusson2018-03-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The PLAT_S5P symbol was removed in commit d78c16ccde96 ("ARM: SAMSUNG: Remove remaining legacy code"). Remove the PLAT_S5P dependency from VIDEO_SAMSUNG_S5P_CEC. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: platform: Add Renesas CEU driverJacopo Mondi2018-02-261-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add driver for Renesas Capture Engine Unit (CEU). The CEU interface supports capturing 'data' (YUV422) and 'images' (NV[12|21|16|61]). This driver aims to replace the soc_camera-based sh_mobile_ceu one. Tested with ov7670 camera sensor, providing YUYV_2X8 data on Renesas RZ platform GR-Peach. Tested with ov7725 camera sensor on SH4 platform Migo-R. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: added two 'fall-through' comments] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* | media: platform: remove m32r specific arv driverArnd Bergmann2018-03-261-20/+0
| | | | | | | | | | | | | | The m32r architecture is getting removed, so this one is no longer needed. Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | media: platform: remove blackfin capture driverArnd Bergmann2018-03-261-2/+0
|/ | | | | | | | | The blackfin architecture is getting removed, so the video capture driver is also obsolete. Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* media: fix usage of whitespaces and on indentationMauro Carvalho Chehab2018-01-041-19/+19
| | | | | | | | | On several places, whitespaces are being used for indentation, or even at the end of the line. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: tegra-cec: add Tegra HDMI CEC driverHans Verkuil2017-10-271-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | This driver adds support for the Tegra CEC IP. It is based on the NVIDIA drivers/misc/tegra-cec driver in their 3.10 kernel. This has been converted to the CEC framework and cleaned up. Tested with my Jetson TK1 board. It has also been tested with the Tegra X1 in an embedded product. Note of warning for the Tegra X2: this SoC supports two HDMI outputs, but only one CEC adapter and the CEC bus is shared between the two outputs. This is a design mistake and the CEC adapter can control only one HDMI output. Never hook up both HDMI outputs to the CEC bus in a hardware design: this is illegal as per the CEC specification. The CEC bus can be shared between multiple inputs and zero or one outputs, but not between multiple outputs. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Merge commit '3728e6a255b5' into patchworkMauro Carvalho Chehab2017-10-181-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * commit '3728e6a255b5': (904 commits) Linux 4.14-rc5 x86/microcode: Do the family check first locking/lockdep: Disable cross-release features for now x86/mm: Flush more aggressively in lazy TLB mode mm, swap: use page-cluster as max window of VMA based swap readahead mm: page_vma_mapped: ensure pmd is loaded with READ_ONCE outside of lock kmemleak: clear stale pointers from task stacks fs/binfmt_misc.c: node could be NULL when evicting inode fs/mpage.c: fix mpage_writepage() for pages with buffers linux/kernel.h: add/correct kernel-doc notation tty: fall back to N_NULL if switching to N_TTY fails during hangup Revert "vmalloc: back off when the current task is killed" mm/cma.c: take __GFP_NOWARN into account in cma_alloc() scripts/kallsyms.c: ignore symbol type 'n' userfaultfd: selftest: exercise -EEXIST only in background transfer mm: only display online cpus of the numa node mm: remove unnecessary WARN_ONCE in page_vma_mapped_walk(). mm/mempolicy: fix NUMA_INTERLEAVE_HIT counter include/linux/of.h: provide of_n_{addr,size}_cells wrappers for !CONFIG_OF mm/madvise.c: add description for MADV_WIPEONFORK and MADV_KEEPONFORK ...
| * media: platform: VIDEO_QCOM_CAMSS should depend on HAS_DMAGeert Uytterhoeven2017-09-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If NO_DMA=y: warning: (TOUCHSCREEN_SUR40 && VIDEO_TW68 && VIDEO_CX23885 && VIDEO_CX25821 && VIDEO_CX88 && VIDEO_SAA7134 && VIDEO_COBALT && VIDEO_QCOM_CAMSS) selects VIDEOBUF2_DMA_SG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA) and ERROR: "bad_dma_ops" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined! ERROR: "bad_dma_ops" [drivers/media/platform/qcom/camss-8x16/qcom-camss.ko] undefined! VIDEO_QCOM_CAMSS selects VIDEOBUF2_DMA_SG, which bypasses its dependency on HAS_DMA. Make VIDEO_QCOM_CAMSS depend on HAS_DMA to fix this. Fixes: f5c074947f56533c ("media: camss: Enable building") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
* | [media] rockchip/rga: v4l2 m2m supportJacob Chen2017-10-171-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rockchip RGA is a separate 2D raster graphic acceleration unit. It accelerates 2D graphics operations, such as point/line drawing, image scaling, rotation, BitBLT, alpha blending and image blur/sharpness The driver supports various operations from the rendering pipeline. - copy - fast solid color fill - rotation - flip - alpha blending The code in rga-hw.c is used to configure regs according to operations The code in rga-buf.c is used to create private mmu table for RGA. Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | media: cec-gpio: add HDMI CEC GPIO driverHans Verkuil2017-09-231-0/+10
|/ | | | | | | | | | | | | | | | | | | | | | | Add a simple HDMI CEC GPIO driver that sits on top of the cec-pin framework. While I have heard of SoCs that use the GPIO pin for CEC (apparently an early RockChip SoC used that), the main use-case of this driver is to function as a debugging tool. By connecting the CEC line to a GPIO pin on a Raspberry Pi 3 for example it turns it into a CEC debugger and protocol analyzer. With 'cec-ctl --monitor-pin' the CEC traffic can be analyzed. But of course it can also be used with any hardware project where the HDMI CEC line is hooked up to a pull-up gpio line. In addition this has (optional) support for tracing HPD changes if the HPD is connected to a GPIO. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: camss: Enable buildingTodor Tomov2017-08-261-0/+7
| | | | | | | | | Add Makefile and update platform/Kconfig and platform/Makefile to enable building of the QCom CAMSS driver. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: platform: Add Amlogic Meson AO CEC Controller driverNeil Armstrong2017-08-091-0/+11
| | | | | | | | | | | | | | | The Amlogic SoC embeds a standalone CEC controller, this patch adds a driver for such controller. The controller does not need HPD to be active, and could support up to max 5 logical addresses, but only 1 is handled since the Suspend firmware can make use of this unique logical address to wake up the device. The Suspend firmware configuration will be added in an other patchset. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com:s/if (ret)/if (res)/ to fix obvious typo] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: venus: fix compile-test build on non-qcom ARM platformArnd Bergmann2017-07-201-2/+2
| | | | | | | | | | | | | | | | | | | If QCOM_MDT_LOADER is enabled, but ARCH_QCOM is not, we run into a build error: ERROR: "qcom_mdt_load" [drivers/media/platform/qcom/venus/venus-core.ko] undefined! ERROR: "qcom_mdt_get_size" [drivers/media/platform/qcom/venus/venus-core.ko] undefined! This changes the 'select' statement again, so we only try to enable those symbols when the drivers will actually get built, and explicitly test for QCOM_MDT_LOADER to be enabled before calling into it. Fixes: 76724b30f222 ("[media] media: venus: enable building with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: platform: video-mux: convert to multiplexer frameworkPhilipp Zabel2017-07-201-0/+1
| | | | | | | | | | | Now that the multiplexer framework is merged, drop the temporary mmio-mux implementation from the video-mux driver and convert it to use the multiplexer API. [mchehab@s-opensource.com: fix a merge conflict at Kconfig] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: platform: video-mux: fix Kconfig dependencyArnd Bergmann2017-07-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | When CONFIG_V4L2 is built as a loadable module, the new video mux driver fails to link as built-in code: drivers/media/platform/video-mux.o: In function `video_mux_remove': video-mux.c:(.text+0x24): undefined reference to `v4l2_async_unregister_subdev' drivers/media/platform/video-mux.o: In function `video_mux_probe': video-mux.c:(.text+0x800): undefined reference to `v4l2_subdev_init' video-mux.c:(.text+0xa10): undefined reference to `v4l2_async_register_subdev' This makes it use the same Kconfig dependency as all the other users of the VIDEO_V4L2_SUBDEV_API symbol. Fixes: 68803ad4522f ("[media] platform: add video-multiplexer subdevice driver") Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] media: venus: enable building with COMPILE_TESTStanimir Varbanov2017-06-201-2/+3
| | | | | | | | | | We want all media drivers to build with COMPILE_TEST, as the Coverity instance we use on Kernel works only for x86. Also, our test workflow relies on it, in order to identify git bisect breakages. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
* [media] media: venus: enable building of Venus video driverStanimir Varbanov2017-06-201-0/+13
| | | | | | | | | | | | | | | This adds Venus driver Makefile and changes v4l2 platform Makefile/Kconfig in order to enable building of the driver. Note that in this initial version the COMPILE_TEST-ing is not supported because the drivers specific to ARM builds are still in process of enabling the aforementioned compile testing. Once that disadvantage is fixed the Venus driver compile testing will be possible with follow-up changes. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] platform: add video-multiplexer subdevice driverPhilipp Zabel2017-06-201-0/+7
| | | | | | | | | | | | | | | | | | | | | | | This driver can handle SoC internal and external video bus multiplexers, controlled by mux controllers provided by the mux controller framework, such as MMIO register bitfields or GPIOs. The subdevice passes through the mbus configuration of the active input to the output side. Since the mux framework is not yet merged, this driver contains temporary mmio-mux support to work without the framework. The driver should be converted to use the multiplexer API once the "mux: minimal mux subsystem" and "mux: mmio-based syscon mux controller" patches are merged. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> [hans.verkuil@cisco.com: add 'select REGMAP' to Kconfig] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] media: platform: rcar_drif: Add DRIF supportRamesh Shanmugasundaram2017-06-201-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds Digital Radio Interface (DRIF) support to R-Car Gen3 SoCs. The driver exposes each instance of DRIF as a V4L2 SDR device. A DRIF device represents a channel and each channel can have one or two sub-channels respectively depending on the target board. DRIF supports only Rx functionality. It receives samples from a RF frontend tuner chip it is interfaced with. The combination of DRIF and the tuner device, which is registered as a sub-device, determines the receive sample rate and format. In order to be compliant as a V4L2 SDR device, DRIF needs to bind with the tuner device, which can be provided by a third party vendor. DRIF acts as a slave device and the tuner device acts as a master transmitting the samples. The driver allows asynchronous binding of a tuner device that is registered as a v4l2 sub-device. The driver can learn about the tuner it is interfaced with based on port endpoint properties of the device in device tree. The V4L2 SDR device inherits the controls exposed by the tuner device. The device can also be configured to use either one or both of the data pins at runtime based on the master (tuner) configuration. Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-08 03:08:00 +0100