summaryrefslogtreecommitdiffstats
path: root/drivers/media/platform/aspeed-video.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* media: platform: place Aspeed driver on a separate dirMauro Carvalho Chehab2022-03-141-2051/+0
| | | | | | | In order to cleanup the main platform media directory, move Aspeed driver to its own directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: aspeed: Remove duplicated include in aspeed-video.cYang Li2022-02-221-1/+0
| | | | | | | | | | Fix following includecheck warning: ./drivers/media/platform/aspeed-video.c: linux/videodev2.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: aspeed: Use of_device_get_match_data() helperJammy Huang2022-02-221-5/+4
| | | | | | | Use of_device_get_match_data() to simplify the code. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: aspeed: Use full swing as JFIF to fix incorrect colorJammy Huang2022-02-221-3/+11
| | | | | | | | | | | | | | | | | | | | | Current settings for video capture rgb-2-yuv is BT.601(studio swing), but JFIF uses BT.601(full swing) to deocde. This mismatch will lead to incorrect color. For example, input RGB value, (0, 0, 255), will become (16, 16, 235) after jpg decoded. Add an enum, aspeed_video_capture_format, to define VR008[7:6] capture format and correct default settings for video capture to fix the problem. VR008[7:6] decides the data format for video capture as below: * 00: CCIR601 studio swing compliant YUV format * 01: CCIR601 full swing compliant YUV format * 10: RGB format * 11: Gray color mode Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: aspeed: Fix unstable timing detectionJammy Huang2022-02-221-0/+13
| | | | | | | | | | | | Using stable-signal in resolution detection, and try detection again if unstable. VE_MODE_DETECT_EXTSRC_ADC: 1 if video source is from ADC output. VE_MODE_DETECT_H_STABLE: 1 if horizontal signal detection is stable. VE_MODE_DETECT_V_STABLE: 1 if vertical signal detection is stable. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: aspeed: Add macro for the fields of the mode-detect registersJammy Huang2022-02-221-1/+12
| | | | | | | | | | | | | | VE_MODE_DT_HOR_TOLER: the tolerance in detecting for stable horizontal signal. VE_MODE_DT_VER_TOLER: the tolerance in detecting for stable vertical signal. VE_MODE_DT_HOR_STABLE: the minimum required count in detecting stable HSYNC signal to set mode detection horizontal signal stable. VE_MODE_DT_VER_STABLE: the minimum required count in detecting stable VSYNC signal to set mode detection vertical signal stable. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
* media: aspeed: add comments and macroJammy Huang2022-02-221-3/+33
| | | | | | | | | | Add comments to describe video-stat and 'struct aspeed_video'. Add macro, ASPEED_VIDEO_V4L2_MIN_BUF_REQ, to describe the buffers needed. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil: drop docbook tags, not needed]
* media: aspeed: Correct values for detected timingJammy Huang2022-01-281-13/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct timing's fp/sync/bp value based on the information below. It should be noticed that the calculation formula should be changed per sync polarity. The sequence of signal: sync - backporch - video data - frontporch The following registers start counting from sync's rising edge: 1. VR090: frame edge's left and right 2. VR094: frame edge's top and bottom 3. VR09C: counting from sync's rising edge to falling edge [Vertical timing] +--+ +-------------------+ +--+ | | | v i d e o | | | +--+ +-----+ +-----+ +---+ vsync+--+ frame_top+--------+ frame_bottom+----------------------------+ +-------------------+ | v i d e o | +--+ +-----+ +-----+ +---+ | | | | +--+ +--+ vsync+-------------------------------+ frame_top+-----+ frame_bottom+-------------------------+ [Horizontal timing] +--+ +-------------------+ +--+ | | | v i d e o | | | +--+ +-----+ +-----+ +---+ hsync+--+ frame_left+--------+ frame_right+----------------------------+ +-------------------+ | v i d e o | +--+ +-----+ +-----+ +---+ | | | | +--+ +--+ hsync+-------------------------------+ frame_left+-----+ frame_right+-------------------------+ Ex. 1920x1200@60 whose vsync polarity is negative VR098: c4d3efff, VR09C: 04cc001f v-total = 0x4D3 (VR098[27:16]) = 1235 v-sync = 0x4CC (VR09C[27:16]) = 1228 [hverkuil: drop unused variable mds] Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: aspeed: Use FIELD_GET to improve readabilityJammy Huang2022-01-281-19/+12
| | | | | | | | | | Use the bitfield macro FIELD_GET, and GENMASK to do the shift and mask in one go for reg values. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: aspeed: Correct value for h-total-pixelsJammy Huang2022-01-281-3/+6
| | | | | | | | | | | | Previous reg-field, 0x98[11:0], stands for the period of the detected hsync signal. Use the correct reg, 0xa0, to get h-total in pixels. Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver") Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: aspeed: Fix no complete irq for non-64-aligned widthJammy Huang2022-01-281-8/+9
| | | | | | | | | | | | In ast2500, engine will stop occasionally for 1360x768. This is a bug which has been addressed, but the workaround is specific for 1680 only. Here we make it more complete. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: aspeed: add more debug log messagesJammy Huang2022-01-281-0/+24
| | | | | | | | | | | | | | | The new messages are listed as below: 1. jpeg header and capture buffer information 2. information for each irq 3. current capture mode, sync or direct-fetch 4. time consumed for each frame 5. input timing changed information [hverkuil: use %pad for dma_addr_t to avoid compiler warnings] Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg for logJammy Huang2022-01-281-17/+23
| | | | | | | | | | | | | The debug log level, 0~3, is controlled by module_param, debug. The higher the value, the more the information. 0: off 1: info 2: debug 3: register operations Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: aspeed: Update signal status immediately to ensure sane hw stateJammy Huang2021-11-151-3/+3
| | | | | | | | | | | | | | | | | | | | If res-chg, VE_INTERRUPT_MODE_DETECT_WD irq will be raised. But v4l2_input_status won't be updated to no-signal immediately until aspeed_video_get_resolution() in aspeed_video_resolution_work(). During the period of time, aspeed_video_start_frame() could be called because it doesn't know signal becomes unstable now. If it goes with aspeed_video_init_regs() of aspeed_video_irq_res_change() simultaneously, it will mess up hw state. To fix this problem, v4l2_input_status is updated to no-signal immediately for VE_INTERRUPT_MODE_DETECT_WD irq. Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver") Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: aspeed: fix mode-detect always time out at 2nd runJammy Huang2021-11-151-4/+4
| | | | | | | | | | | | | | | | aspeed_video_get_resolution() will try to do res-detect again if the timing got in last try is invalid. But it will always time out because VE_SEQ_CTRL_TRIG_MODE_DET is only cleared after 1st mode-detect. To fix the problem, just clear VE_SEQ_CTRL_TRIG_MODE_DET before setting it in aspeed_video_enable_mode_detect(). Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver") Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: aspeed: add debugfsJammy Huang2021-10-191-0/+100
| | | | | | | | | | | | | | | | | | | | | | | | To show video real-time information as below: Capture: Signal : Unlock Width : 1920 Height : 1080 FRC : 30 Performance: Frame# : 0 Frame Duration(ms) : Now : 0 Min : 0 Max : 0 FPS : 0 [hverkuil: make aspeed_video_proc_open() static, fixes sparse warning] Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: aspeed: refine to avoid full jpeg updateJammy Huang2021-10-051-1/+16
| | | | | | | | | | | The switch of jpeg 420/444 subsampling will update full jpeg header for aspeed now. Just update the 420/444 subsampling part of jpeg header is fine. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: aspeed-video: ignore interrupts that aren't enabledZev Weiss2021-09-301-10/+6
| | | | | | | | | | | | | | | As partially addressed in commit 65d270acb2d6 ("media: aspeed: clear garbage interrupts"), the ASpeed video engine sometimes asserts interrupts that the driver hasn't enabled. In addition to the CAPTURE_COMPLETE and FRAME_COMPLETE interrupts dealt with in that patch, COMP_READY has also been observed. Instead of playing whack-a-mole with each one individually, we can instead just blanket ignore everything we haven't explicitly enabled. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Tested-by: Lei YU <yulei.sh@bytedance.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: aspeed: fix clock handling logicJae Hyun Yoo2021-03-111-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Video engine uses eclk and vclk for its clock sources and its reset control is coupled with eclk so the current clock enabling sequence works like below. Enable eclk De-assert Video Engine reset 10ms delay Enable vclk It introduces improper reset on the Video Engine hardware and eventually the hardware generates unexpected DMA memory transfers that can corrupt memory region in random and sporadic patterns. This issue is observed very rarely on some specific AST2500 SoCs but it causes a critical kernel panic with making a various shape of signature so it's extremely hard to debug. Moreover, the issue is observed even when the video engine is not actively used because udevd turns on the video engine hardware for a short time to make a query in every boot. To fix this issue, this commit changes the clock handling logic to make the reset de-assertion triggered after enabling both eclk and vclk. Also, it adds clk_unprepare call for a case when probe fails. clk: ast2600: fix reset settings for eclk and vclk Video engine reset setting should be coupled with eclk to match it with the setting for previous Aspeed SoCs which is defined in clk-aspeed.c since all Aspeed SoCs are sharing a single video engine driver. Also, reset bit 6 is defined as 'Video Engine' reset in datasheet so it should be de-asserted when eclk is enabled. This commit fixes the setting. Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver") Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Eddie James <eajames@linux.ibm.com> Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC") Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: aspeed: fix error return code in aspeed_video_setup_video()Zhang Changzhong2021-01-121-3/+3
| | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: media/platform: drop vb2_queue_release()Hans Verkuil2020-08-281-4/+1
| | | | | | | | | | | | | | | This is only needed for drivers that do not use vb2_fop_release(). Note that vb2_queue_release() is *not* the counterpart of vb2_queue_init() as some drivers here seem to think. Also use vb2_video_unregister_device() to automatically stop streaming at unregister time for those drivers that set vdev->queue. Note that sun4i-csi didn't unregister the video device at all. That's now fixed. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: aspeed: add AST2600 supportJae Hyun Yoo2020-03-021-4/+11
| | | | | | | | | | | | | Video engine in AST2600 has the exactly same register set with AST2500 except VR084 register which provides more precise JPEG size read back. This commit adds support for the difference and adds 'aspeed,ast2600-video-engine' compatible OF string. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: media/platform: rename VFL_TYPE_GRABBER to _VIDEOHans Verkuil2020-02-241-2/+2
| | | | | | | | | 'GRABBER' is a weird name, all other types map to the /dev device names. Rename to 'VIDEO' to be consistent with the other types. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: video: aspeed: Update copyright informationJoel Stanley2020-02-241-1/+3
| | | | | | | | | | | | Use the preferred form for GPL2+, and add IBM and Intel as the authors. The driver was initially upstreamed by Eddie from IBM, and has had major contributions from Jae at Intel. Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: aspeed: Use runtime configurationJoel Stanley2020-02-241-14/+39
| | | | | | | | | | | | | | | | The aspeed video IP has some differences between SoC families. Currently the driver decides which registers to use at compile time, which means a single kernel can not be used between platforms. Switch to using runtime configuration of the registers that vary between SoC families. This is in preparation for upcoming ast2600 support. [hverkuil: replace ;; by ;] Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: aspeed: Rework memory mapping in probeJoel Stanley2020-02-241-10/+6
| | | | | | | | | | | | Use the recently introduced function devm_platform_ioremap_resource to save a few lines of code. This makes the driver match common platform device probe patterns. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: aspeed-video: Fix memory leaks in aspeed_video_probeNavid Emamdoost2019-11-101-1/+2
| | | | | | | | | | | | | | In the implementation of aspeed_video_probe() the allocated memory for video should be released if either devm_ioremap_resource() or aspeed_video_init() or aspeed_video_setup_video() fails. Replace kzalloc() with devm_kzalloc to avoid explicit release for video. Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: aspeed: clear garbage interruptsJae Hyun Yoo2019-10-241-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CAPTURE_COMPLETE and FRAME_COMPLETE interrupts come even when these are disabled in the VE_INTERRUPT_CTRL register and eventually this behavior causes disabling irq itself like below: [10055.108784] irq 23: nobody cared (try booting with the "irqpoll" option) [10055.115525] CPU: 0 PID: 331 Comm: swampd Tainted: G W 5.3.0-4fde000-dirty-d683e2e #1 [10055.124565] Hardware name: Generic DT based system [10055.129355] Backtrace: [10055.131854] [<80107d7c>] (dump_backtrace) from [<80107fb0>] (show_stack+0x20/0x24) [10055.139431] r7:00000017 r6:00000001 r5:00000000 r4:9d51dc00 [10055.145120] [<80107f90>] (show_stack) from [<8074bf50>] (dump_stack+0x20/0x28) [10055.152361] [<8074bf30>] (dump_stack) from [<80150ffc>] (__report_bad_irq+0x40/0xc0) [10055.160109] [<80150fbc>] (__report_bad_irq) from [<80150f2c>] (note_interrupt+0x23c/0x294) [10055.168374] r9:015b6e60 r8:00000000 r7:00000017 r6:00000001 r5:00000000 r4:9d51dc00 [10055.176136] [<80150cf0>] (note_interrupt) from [<8014df1c>] (handle_irq_event_percpu+0x88/0x98) [10055.184835] r10:7eff7910 r9:015b6e60 r8:00000000 r7:9d417600 r6:00000001 r5:00000002 [10055.192657] r4:9d51dc00 r3:00000000 [10055.196248] [<8014de94>] (handle_irq_event_percpu) from [<8014df64>] (handle_irq_event+0x38/0x4c) [10055.205113] r5:80b56d50 r4:9d51dc00 [10055.208697] [<8014df2c>] (handle_irq_event) from [<80151f1c>] (handle_level_irq+0xbc/0x12c) [10055.217037] r5:80b56d50 r4:9d51dc00 [10055.220623] [<80151e60>] (handle_level_irq) from [<8014d4b8>] (generic_handle_irq+0x30/0x44) [10055.229052] r5:80b56d50 r4:00000017 [10055.232648] [<8014d488>] (generic_handle_irq) from [<8014d524>] (__handle_domain_irq+0x58/0xb4) [10055.241356] [<8014d4cc>] (__handle_domain_irq) from [<801021e4>] (avic_handle_irq+0x68/0x70) [10055.249797] r9:015b6e60 r8:00c5387d r7:00c5387d r6:ffffffff r5:9dd33fb0 r4:9d402380 [10055.257539] [<8010217c>] (avic_handle_irq) from [<80101e34>] (__irq_usr+0x54/0x80) [10055.265105] Exception stack(0x9dd33fb0 to 0x9dd33ff8) [10055.270152] 3fa0: 015d0530 00000000 00000000 015d0538 [10055.278328] 3fc0: 015d0530 015b6e60 00000000 00000000 0052c5d0 015b6e60 7eff7910 7eff7918 [10055.286496] 3fe0: 76ce5614 7eff7908 0050e2f4 76a3a08c 20000010 ffffffff [10055.293104] r5:20000010 r4:76a3a08c [10055.296673] handlers: [10055.298967] [<79f218a5>] irq_default_primary_handler threaded [<1de88514>] aspeed_video_irq [10055.307344] Disabling IRQ #23 To fix this issue, this commit makes the interrupt handler clear these garbage interrupts. This driver enables and uses only COMP_COMPLETE interrupt instead for frame handling. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: set hsync and vsync polarities to normal before starting mode ↵Jae Hyun Yoo2019-10-241-0/+2
| | | | | | | | | | | | | | | detection Sometimes it detects a weird resolution such as 1024x287 when the actual resolution is 1024x768. To resolve such an issue, this commit adds clearing for hsync and vsync polarity register bits at the beginning of the first mode detection. This is recommended in the datasheet. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: refine hsync/vsync polarity setting logicJae Hyun Yoo2019-10-241-22/+21
| | | | | | | | | | To prevent inaccurate detections of resolution, this commit enables clearing of hsync/vsync polarity bits based on probed sync state. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed-video: address a protential usage of an unitialized varMauro Carvalho Chehab2019-08-261-2/+3
| | | | | | | | | | | | | | | | | | | | While this might not occur in practice, if the device is doing the right thing, it would be teoretically be possible to have both hsync_counter and vsync_counter negatives. If this ever happen, ctrl will be undefined, but the driver will still call: aspeed_video_update(video, VE_CTRL, 0, ctrl); Change the code to prevent this to happen. This was warned by cppcheck: [drivers/media/platform/aspeed-video.c:653]: (error) Uninitialized variable: ctrl Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: fix an incorrect return code on buffer allocation failureJae Hyun Yoo2019-08-261-0/+1
| | | | | | | | | | It returns '0' even when a failure happens on jpeg buffer allocation so this commit fixes the issue. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: add a workaround to fix a silicon bugJae Hyun Yoo2019-06-211-7/+21
| | | | | | | | | | | | | | AST2500 silicon revision A1 and A2 have a silicon bug which causes extremly long capturing time on specific resolutions (1680 width). To fix the bug, this commit adjusts the capturing window register setting to 1728 if detected width is 1680. The compression window register setting will be kept as the original width so output result will be the same. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: use different delays for triggering VE H/W resetJae Hyun Yoo2019-06-051-4/+5
| | | | | | | | | | | | In case of watchdog timeout detected while doing mode detection, it's better triggering video engine hardware reset immediately so this commit fixes code for the case. Other than the case, it will trigger video engine hardware reset after RESOLUTION_CHANGE_DELAY. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: remove source buffer allocation before mode detectionJae Hyun Yoo2019-06-051-32/+5
| | | | | | | | | | Mode detection doesn't require source buffer allocation so this commit removes that. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: refine interrupt handling logicJae Hyun Yoo2019-06-051-3/+4
| | | | | | | | | | | | | | There are cases that interrupt bits are cleared by a 500ms delayed work which causes unnecessary irq calls. Also, the current interrupt handler returns IRQ_HANDLED always but it should return IRQ_NONE if there is any unhandled interrupt. So this commit refines the interrupt handling logic to fix these issues. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETEJae Hyun Yoo2019-06-051-8/+4
| | | | | | | | | | | | | | | | | | | VE_INTERRUPT_CAPTURE_COMPLETE and VE_INTERRUPT_COMP_COMPLETE are not set at the same time but the current interrupt handling mechanism of this driver doesn't clear the interrupt flag until both two are set, and this behavior causes unnecessary interrupt handler calls. In fact, this driver provides JPEG format only so taking care of the VE_INTERRUPT_COMP_COMPLETE is enough for getting compressed image frame so this commit gets rid of the VE_INTERRUPT_CAPTURE_COMPLETE checking logic to simplify the logic. Handling of VE_INTERRUPT_CAPTURE_COMPLETE could be added back later when it's actually needed. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: reduce noisy log printing outsJae Hyun Yoo2019-06-051-5/+5
| | | | | | | | | | | | | Currently, this driver prints out too much log messages when a mode change happens, video turned off by screen saver and etc. Actually, all cases are reported to user space properly. Also, these are not critical errors but recoverable things, so this commit changes the log level of some noisy printing outs. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: remove IRQF_SHARED flagJae Hyun Yoo2019-06-051-2/+1
| | | | | | | | | | | | | | | Video Engine has a dedicated interrupt line so this driver doesn't need to use IRQF_SHARED flag so remove it. Also, it'd be good for following what Thomas recommended in the IRQF_ONESHOT support patch like below: "Note that for now IRQF_ONESHOT cannot be used with IRQF_SHARED to avoid complex accounting mechanisms." Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: change irq to threaded irqJae Hyun Yoo2019-06-051-2/+3
| | | | | | | | | | | | | | | Differently from other Aspeed drivers, this driver calls clock control APIs in interrupt context. Since ECLK is coupled with a reset bit in clk-aspeed module, aspeed_clk_enable will make 10ms of busy waiting delay for triggering the reset and it will eventually disturb other drivers' interrupt handling. To fix this issue, this commit changes this driver's irq to threaded irq so that the delay can be happened in a thread context. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: refine clock control logicJae Hyun Yoo2019-06-051-9/+29
| | | | | | | | | | | | | Currently, this driver calls clk_prepare and clk_unprepare from interrupt context too but these should be called from sleepable context only. To fix this issue, this commit splits out clk_enable/disable and clk_prepare/unprepare, and it places clk_prepare/unprepare calls into the module probe/remove function. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: aspeed: fix a kernel warning on clk controlJae Hyun Yoo2019-06-051-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Video engine clock control can be double disabled and eventually it causes a kernel warning with stack dump printing out like below: [ 515.540498] ------------[ cut here ]------------ [ 515.545174] WARNING: CPU: 0 PID: 1310 at drivers/clk/clk.c:684 clk_core_unprepare+0x13c/0x170 [ 515.553806] vclk-gate already unprepared [ 515.557841] CPU: 0 PID: 1310 Comm: obmc-ikvm Tainted: G W 5.0.6-df66fbc97853fbba90a0bfa44de32f3d5f7602b4 #1 [ 515.568973] Hardware name: Generic DT based system [ 515.573777] Backtrace: [ 515.576272] [<80107cdc>] (dump_backtrace) from [<80107f10>] (show_stack+0x20/0x24) [ 515.583930] r7:803a5614 r6:00000009 r5:00000000 r4:9d88fe1c [ 515.589712] [<80107ef0>] (show_stack) from [<80690184>] (dump_stack+0x20/0x28) [ 515.597053] [<80690164>] (dump_stack) from [<80116044>] (__warn.part.3+0xb4/0xdc) [ 515.604557] [<80115f90>] (__warn.part.3) from [<801160d8>] (warn_slowpath_fmt+0x6c/0x90) [ 515.612734] r6:000002ac r5:8080befc r4:80a07008 [ 515.617463] [<80116070>] (warn_slowpath_fmt) from [<803a5614>] (clk_core_unprepare+0x13c/0x170) [ 515.626167] r3:8080cdf4 r2:8080bfc0 [ 515.629834] r7:98d682a8 r6:9d8a9200 r5:9e5151a0 r4:97abd620 [ 515.635530] [<803a54d8>] (clk_core_unprepare) from [<803a76a4>] (clk_unprepare+0x34/0x3c) [ 515.643812] r5:9e5151a0 r4:97abd620 [ 515.647529] [<803a7670>] (clk_unprepare) from [<804f36ec>] (aspeed_video_off+0x38/0x50) [ 515.655539] r5:9e5151a0 r4:9e504000 [ 515.659242] [<804f36b4>] (aspeed_video_off) from [<804f4358>] (aspeed_video_release+0x90/0x114) [ 515.668036] r5:9e5044b0 r4:9e504000 [ 515.671643] [<804f42c8>] (aspeed_video_release) from [<804d302c>] (v4l2_release+0xd4/0xe8) [ 515.679999] r7:98d682a8 r6:9d087810 r5:9d8a9200 r4:9e504318 [ 515.685695] [<804d2f58>] (v4l2_release) from [<80236454>] (__fput+0x98/0x1c4) [ 515.692914] r5:9e51b608 r4:9d8a9200 [ 515.696597] [<802363bc>] (__fput) from [<802365e8>] (____fput+0x18/0x1c) [ 515.703315] r9:80a0700c r8:801011e4 r7:00000000 r6:80a64b9c r5:9d8e35a0 r4:9d8e38dc [ 515.711167] [<802365d0>] (____fput) from [<80131ca4>] (task_work_run+0x7c/0xa0) [ 515.718596] [<80131c28>] (task_work_run) from [<80106884>] (do_work_pending+0x4a8/0x578) [ 515.726777] r7:801011e4 r6:80a07008 r5:9d88ffb0 r4:ffffe000 [ 515.732466] [<801063dc>] (do_work_pending) from [<8010106c>] (slow_work_pending+0xc/0x20) [ 515.740727] Exception stack(0x9d88ffb0 to 0x9d88fff8) [ 515.745840] ffa0: 00000000 76f18094 00000000 00000000 [ 515.754122] ffc0: 00000007 00176778 7eda4c20 00000006 00000000 00000000 48e20fa4 00000000 [ 515.762386] ffe0: 00000002 7eda4b08 00000000 48f91efc 80000010 00000007 [ 515.769097] r10:00000000 r9:9d88e000 r8:801011e4 r7:00000006 r6:7eda4c20 r5:00176778 [ 515.777006] r4:00000007 [ 515.779558] ---[ end trace 12c04aadef8afbbb ]--- [ 515.784176] ------------[ cut here ]------------ [ 515.788817] WARNING: CPU: 0 PID: 1310 at drivers/clk/clk.c:825 clk_core_disable+0x18c/0x204 [ 515.797161] eclk-gate already disabled [ 515.800916] CPU: 0 PID: 1310 Comm: obmc-ikvm Tainted: G W 5.0.6-df66fbc97853fbba90a0bfa44de32f3d5f7602b4 #1 [ 515.811945] Hardware name: Generic DT based system [ 515.816730] Backtrace: [ 515.819210] [<80107cdc>] (dump_backtrace) from [<80107f10>] (show_stack+0x20/0x24) [ 515.826782] r7:803a5900 r6:00000009 r5:00000000 r4:9d88fe04 [ 515.832454] [<80107ef0>] (show_stack) from [<80690184>] (dump_stack+0x20/0x28) [ 515.839687] [<80690164>] (dump_stack) from [<80116044>] (__warn.part.3+0xb4/0xdc) [ 515.847170] [<80115f90>] (__warn.part.3) from [<801160d8>] (warn_slowpath_fmt+0x6c/0x90) [ 515.855247] r6:00000339 r5:8080befc r4:80a07008 [ 515.859868] [<80116070>] (warn_slowpath_fmt) from [<803a5900>] (clk_core_disable+0x18c/0x204) [ 515.868385] r3:8080cdd0 r2:8080c00c [ 515.871957] r7:98d682a8 r6:9d8a9200 r5:97abd560 r4:97abd560 [ 515.877615] [<803a5774>] (clk_core_disable) from [<803a59a0>] (clk_core_disable_lock+0x28/0x34) [ 515.886301] r7:98d682a8 r6:9d8a9200 r5:97abd560 r4:a0000013 [ 515.891960] [<803a5978>] (clk_core_disable_lock) from [<803a7714>] (clk_disable+0x2c/0x30) [ 515.900216] r5:9e5151a0 r4:9e515f60 [ 515.903816] [<803a76e8>] (clk_disable) from [<804f36f8>] (aspeed_video_off+0x44/0x50) [ 515.911656] [<804f36b4>] (aspeed_video_off) from [<804f4358>] (aspeed_video_release+0x90/0x114) [ 515.920341] r5:9e5044b0 r4:9e504000 [ 515.923921] [<804f42c8>] (aspeed_video_release) from [<804d302c>] (v4l2_release+0xd4/0xe8) [ 515.932184] r7:98d682a8 r6:9d087810 r5:9d8a9200 r4:9e504318 [ 515.937851] [<804d2f58>] (v4l2_release) from [<80236454>] (__fput+0x98/0x1c4) [ 515.944980] r5:9e51b608 r4:9d8a9200 [ 515.948559] [<802363bc>] (__fput) from [<802365e8>] (____fput+0x18/0x1c) [ 515.955257] r9:80a0700c r8:801011e4 r7:00000000 r6:80a64b9c r5:9d8e35a0 r4:9d8e38dc [ 515.963008] [<802365d0>] (____fput) from [<80131ca4>] (task_work_run+0x7c/0xa0) [ 515.970333] [<80131c28>] (task_work_run) from [<80106884>] (do_work_pending+0x4a8/0x578) [ 515.978421] r7:801011e4 r6:80a07008 r5:9d88ffb0 r4:ffffe000 [ 515.984086] [<801063dc>] (do_work_pending) from [<8010106c>] (slow_work_pending+0xc/0x20) [ 515.992247] Exception stack(0x9d88ffb0 to 0x9d88fff8) [ 515.997296] ffa0: 00000000 76f18094 00000000 00000000 [ 516.005473] ffc0: 00000007 00176778 7eda4c20 00000006 00000000 00000000 48e20fa4 00000000 [ 516.013642] ffe0: 00000002 7eda4b08 00000000 48f91efc 80000010 00000007 [ 516.020257] r10:00000000 r9:9d88e000 r8:801011e4 r7:00000006 r6:7eda4c20 r5:00176778 [ 516.028072] r4:00000007 [ 516.030606] ---[ end trace 12c04aadef8afbbc ]--- To prevent this issue, this commit adds clock status checking logic into the Aspeed video engine driver. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: platform: Aspeed: Make reserved memory optionalEddie James2019-04-301-5/+1
| | | | | | | | | Reserved memory doesn't need to be required; system memory would work fine. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: platform: Aspeed: Remove use of reset lineEddie James2019-04-301-22/+5
| | | | | | | | | | The reset line is toggled by enabling the clocks, so it's not necessary to manually toggle the reset as well. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: platform: Fix missing spin_lock_init()Wei Yongjun2019-01-071-0/+1
| | | | | | | | | | | | The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: platform: Add Aspeed Video Engine driverEddie James2018-12-121-0/+1729
The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can capture and compress video data from digital or analog sources. With the Aspeed chip acting a service processor, the Video Engine can capture the host processor graphics output. Add a V4L2 driver to capture video data and compress it to JPEG images. Make the video frames available through the V4L2 streaming interface. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 22:53:38 +0100