summaryrefslogtreecommitdiffstats
path: root/drivers/media (follow)
Commit message (Collapse)AuthorAgeFilesLines
* media: dvb: fix a Kconfig typoMichael Ira Krufky2018-03-051-1/+1
| | | | | | | drivers/media/Kconfig: typo: replace `with` with `which` Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: tegra-cec: reset rx_buf_cnt when start bit detectedHans Verkuil2018-03-051-10/+7
| | | | | | | | | | | | | | | | If a start bit is detected, then reset the receive buffer counter to 0. This ensures that no stale data is in the buffer if a message is broken off midstream due to e.g. a Low Drive condition and then retransmitted. The only Rx interrupts we need to listen to are RX_REGISTER_FULL (i.e. a valid byte was received) and RX_START_BIT_DETECTED (i.e. a new message starts and we need to reset the counter). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: vb2: Makefile: place vb2-trace together with vb2-coreMauro Carvalho Chehab2018-02-261-4/+7
| | | | | | | | | | | | | | | We don't want a separate module for vb2-trace. That fixes this warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/common/videobuf2/vb2-trace.o When building as module. While here, add a SPDX header. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: Don't let tvp5150_get_vbi() go out of vbi_ram_default arrayMauro Carvalho Chehab2018-02-231-43/+45
| | | | | | | | | | | | As pointed by Dan, possible values for bits[3:0] of te Line Mode Registers can range from 0x0 to 0xf, but the check logic allow values ranging from 0x0 to 0xe. As static arrays are initialized with zero, using a value without an explicit initializer at the array won't cause any harm. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb: update buffer mmaped flags and frame counterMauro Carvalho Chehab2018-02-237-69/+124
| | | | | | | Now that we have support for a buffer counter and for error flags, update them at DMX_DQBUF. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dmxdev: Fix the logic that enables DMA mmap supportMauro Carvalho Chehab2018-02-231-33/+42
| | | | | | | | | | | | Some conditions required for DVB mmap support to work are reversed. Also, the logic is not too clear. So, improve the logic, making it easier to be handled. PS.: I'm pretty sure that I fixed it while testing, but, somehow, the change got lost. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dmxdev: fix error code for invalid ioctlsMauro Carvalho Chehab2018-02-231-1/+1
| | | | | | | | | Returning -EINVAL when an ioctl is not implemented is a very bad idea, as it is hard to distinguish from other error contitions that an ioctl could lead. Replace it by its right error code: -ENOTTY. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: m88ds3103: don't call a non-initalized functionMauro Carvalho Chehab2018-02-231-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [<bf0ae1ec>] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c) [ 7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264) [ 7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4) [ 7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134) [ 7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168) [ 7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4) [ 7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8) [ 7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec) [ 7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: au0828: add VIDEO_V4L2 dependencyArnd Bergmann2018-02-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | After the move of videobuf2 into the common directory, selecting the au0828 driver with CONFIG_V4L2 disabled started causing a link failure, as we now attempt to build videobuf2 but it still requires v4l2: ERROR: "v4l2_event_pending" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "v4l2_fh_release" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "video_devdata" [drivers/media/common/videobuf/videobuf2-v4l2.ko] undefined! ERROR: "__tracepoint_vb2_buf_done" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "__tracepoint_vb2_dqbuf" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! ERROR: "v4l_vb2q_enable_media_source" [drivers/media/common/videobuf/videobuf2-core.ko] undefined! This adds the same dependency in au0828 that the other users of videobuf2 have. Fixes: 03fbdb2fc2b8 ("media: move videobuf2 to drivers/media/common") Fixes: 05439b1a3693 ("[media] media: au0828 - convert to use videobuf2") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb: fix DVB_MMAP dependencyArnd Bergmann2018-02-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling CONFIG_DVB_MMAP without CONFIG_VIDEOBUF2_VMALLOC results in a link error: drivers/media/dvb-core/dvb_vb2.o: In function `_stop_streaming': dvb_vb2.c:(.text+0x894): undefined reference to `vb2_buffer_done' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_init': dvb_vb2.c:(.text+0xbec): undefined reference to `vb2_vmalloc_memops' dvb_vb2.c:(.text+0xc4c): undefined reference to `vb2_core_queue_init' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_release': dvb_vb2.c:(.text+0xe14): undefined reference to `vb2_core_queue_release' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_stream_on': dvb_vb2.c:(.text+0xeb8): undefined reference to `vb2_core_streamon' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_stream_off': dvb_vb2.c:(.text+0xfe8): undefined reference to `vb2_core_streamoff' drivers/media/dvb-core/dvb_vb2.o: In function `dvb_vb2_fill_buffer': dvb_vb2.c:(.text+0x13ec): undefined reference to `vb2_plane_vaddr' dvb_vb2.c:(.text+0x149c): undefined reference to `vb2_buffer_done' This adds a 'select' statement for it, plus a dependency that ensures that videobuf2 in turn works, as it in turn depends on VIDEO_V4L2 to link, and that must not be a module if videobuf2 is built-in. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb: fix DVB_MMAP symbol nameArnd Bergmann2018-02-232-16/+16
| | | | | | | | | | | CONFIG_DVB_MMAP was misspelled either as CONFIG_DVB_MMSP or DVB_MMAP, so it had no effect at all. This fixes that, to make it possible to build it again. Fixes: 4021053ed52d ("media: dvb-core: make DVB mmap API optional") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: videobuf2: fix build issues with vb2-traceMauro Carvalho Chehab2018-02-233-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There was a trouble with vb2-trace: instead of being part of VB2 core, it was stored at V4L2 videodev. That was wrong, as it doesn't actually belong to V4L2 core. Now that vb2 is not part of v4l2-core, its trace functions should be moved altogether. So, move it to its rightful place: at videobuf2-core. That fixes those errors: drivers/media/common/videobuf2/videobuf2-core.o: In function `__read_once_size': ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_queue' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_queue' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_done' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_done' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_qbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_qbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_dqbuf' ./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_dqbuf' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x10): undefined reference to `__tracepoint_vb2_buf_queue' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x28): undefined reference to `__tracepoint_vb2_buf_done' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x40): undefined reference to `__tracepoint_vb2_qbuf' drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x58): undefined reference to `__tracepoint_vb2_dqbuf' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 partSakari Ailus2018-02-233-1/+6
| | | | | | | | | | | | | | | | Videobuf2 is now separate from V4L2 and can be now built without it, at least in principle --- enabling videobuf2 in kernel configuration attempts to compile videobuf2-v4l2.c but that will fail if CONFIG_VIDEO_V4L2 isn't enabled. Solve this by adding a separate Kconfig option for videobuf2-v4l2 and make it a separate module as well. This means that drivers now need to choose both the appropriate videobuf2 memory type (VIDEOBUF2_{VMALLOC,DMA_CONTIG,DMA_SG}) and VIDEOBUF2_V4L2 if they need both. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds2018-02-1145-160/+160
| | | | | | | | | | | | | | | | | | | | | | | This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* media: videobuf2: fix up for "media: annotate ->poll() instances"Stephen Rothwell2018-02-061-2/+2
| | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'media/v4.16-2' of ↵Linus Torvalds2018-02-06813-13159/+16036
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - videobuf2 was moved to a media/common dir, as it is now used by the DVB subsystem too - Digital TV core memory mapped support interface - new sensor driver: ov7740 - several improvements at ddbridge driver - new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel SoCs - new tuner driver: tda18250 - finally got rid of all LIRC staging drivers - as we don't have old lirc drivers anymore, restruct the lirc device code - add support for UVC metadata - add a new staging driver for NVIDIA Tegra Video Decoder Engine - DVB kAPI headers moved to include/media - synchronize the kAPI and uAPI for the DVB subsystem, removing the gap for non-legacy APIs - reduce the kAPI gap for V4L2 - lots of other driver enhancements, cleanups, etc. * tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits) media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32 media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32 media: v4l2-compat-ioctl32.c: avoid sizeof(type) media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32 media: v4l2-compat-ioctl32.c: fix the indentation media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF media: v4l2-ioctl.c: don't copy back the result for -ENOTTY media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt media: vivid: fix module load error when enabling fb and no_error_inj=1 media: dvb_demux: improve debug messages media: dvb_demux: Better handle discontinuity errors media: cxusb, dib0700: ignore XC2028_I2C_FLUSH media: ts2020: avoid integer overflows on 32 bit machines media: i2c: ov7740: use gpio/consumer.h instead of gpio.h media: entity: Add a nop variant of media_entity_cleanup ...
| * media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevsHans Verkuil2018-01-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the device is of type VFL_TYPE_SUBDEV then vdev->ioctl_ops is NULL so the 'if (!ops->vidioc_query_ext_ctrl)' check would crash. Add a test for !ops to the condition. All sub-devices that have controls will use the control framework, so they do not have an equivalent to ops->vidioc_query_ext_ctrl. Returning false if ops is NULL is the correct thing to do here. Fixes: b8c601e8af ("v4l2-compat-ioctl32.c: fix ctrl_is_pointer") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logicDaniel Mentz2018-01-301-263/+477
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 32-bit compat v4l2 ioctl handling is implemented based on its 64-bit equivalent. It converts 32-bit data structures into its 64-bit equivalents and needs to provide the data to the 64-bit ioctl in user space memory which is commonly allocated using compat_alloc_user_space(). However, due to how that function is implemented, it can only be called a single time for every syscall invocation. Supposedly to avoid this limitation, the existing code uses a mix of memory from the kernel stack and memory allocated through compat_alloc_user_space(). Under normal circumstances, this would not work, because the 64-bit ioctl expects all pointers to point to user space memory. As a workaround, set_fs(KERNEL_DS) is called to temporarily disable this extra safety check and allow kernel pointers. However, this might introduce a security vulnerability: The result of the 32-bit to 64-bit conversion is writeable by user space because the output buffer has been allocated via compat_alloc_user_space(). A malicious user space process could then manipulate pointers inside this output buffer, and due to the previous set_fs(KERNEL_DS) call, functions like get_user() or put_user() no longer prevent kernel memory access. The new approach is to pre-calculate the total amount of user space memory that is needed, allocate it using compat_alloc_user_space() and then divide up the allocated memory to accommodate all data structures that need to be converted. An alternative approach would have been to retain the union type karg that they allocated on the kernel stack in do_video_ioctl(), copy all data from user space into karg and then back to user space. However, we decided against this approach because it does not align with other compat syscall implementations. Instead, we tried to replicate the get_user/put_user pairs as found in other places in the kernel: if (get_user(clipcount, &up->clipcount) || put_user(clipcount, &kp->clipcount)) return -EFAULT; Notes from hans.verkuil@cisco.com: This patch was taken from: https://github.com/LineageOS/android_kernel_samsung_apq8084/commit/97b733953c06e4f0398ade18850f0817778255f7 Clearly nobody could be bothered to upstream this patch or at minimum tell us :-( We only heard about this a week ago. This patch was rebased and cleaned up. Compared to the original I also swapped the order of the convert_in_user arguments so that they matched copy_in_user. It was hard to review otherwise. I also replaced the ALLOC_USER_SPACE/ALLOC_AND_GET by a normal function. Fixes: 6b5a9492ca ("v4l: introduce string control support.") Signed-off-by: Daniel Mentz <danielmentz@google.com> Co-developed-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: v4l2-compat-ioctl32.c: don't copy back the result for certain errorsHans Verkuil2018-01-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | Some ioctls need to copy back the result even if the ioctl returned an error. However, don't do this for the error code -ENOTTY. It makes no sense in that cases. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer typeHans Verkuil2018-01-301-4/+0
| | | | | | | | | | | | | | | | | | | | | | There is nothing wrong with using an unknown buffer type. So stop spamming the kernel log whenever this happens. The kernel will just return -EINVAL to signal this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32Hans Verkuil2018-01-301-19/+40
| | | | | | | | | | | | | | | | | | | | put_v4l2_window32() didn't copy back the clip list to userspace. Drivers can update the clip rectangles, so this should be done. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: v4l2-compat-ioctl32.c: fix ctrl_is_pointerHans Verkuil2018-01-301-19/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ctrl_is_pointer just hardcoded two known string controls, but that caused problems when using e.g. custom controls that use a pointer for the payload. Reimplement this function: it now finds the v4l2_ctrl (if the driver uses the control framework) or it calls vidioc_query_ext_ctrl (if the driver implements that directly). In both cases it can now check if the control is a pointer control or not. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32Hans Verkuil2018-01-301-19/+28
| | | | | | | | | | | | | | | | | | | | The struct v4l2_plane32 should set m.userptr as well. The same happens in v4l2_buffer32 and v4l2-compliance tests for this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: v4l2-compat-ioctl32.c: avoid sizeof(type)Hans Verkuil2018-01-301-43/+36
| | | | | | | | | | | | | | | | | | | | | | Instead of doing sizeof(struct foo) use sizeof(*up). There even were cases where 4 * sizeof(__u32) was used instead of sizeof(kp->reserved), which is very dangerous when the size of the reserved array changes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32Hans Verkuil2018-01-301-100/+24
| | | | | | | | | | | | | | | | | | | | These helper functions do not really help. Move the code to the __get/put_v4l2_format32 functions. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: v4l2-compat-ioctl32.c: fix the indentationHans Verkuil2018-01-301-105/+107
| | | | | | | | | | | | | | | | | | | | The indentation of this source is all over the place. Fix this. This patch only changes whitespace. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUFHans Verkuil2018-01-301-0/+1
| | | | | | | | | | | | | | | | | | | | The result of the VIDIOC_PREPARE_BUF ioctl was never copied back to userspace since it was missing in the switch. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: v4l2-ioctl.c: don't copy back the result for -ENOTTYHans Verkuil2018-01-301-1/+4
| | | | | | | | | | | | | | | | | | | | If the ioctl returned -ENOTTY, then don't bother copying back the result as there is no point. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmtHans Verkuil2018-01-301-86/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't duplicate the buffer type checks in enum/g/s/try_fmt. The check_fmt function does that already. It is hard to keep the checks in sync for all these functions and in fact the check for VBI was wrong in the _fmt functions as it allowed SDR types as well. This caused a v4l2-compliance failure for /dev/swradio0 using vivid. This simplifies the code and keeps the check in one place and fixes the SDR/VBI bug. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: vivid: fix module load error when enabling fb and no_error_inj=1Hans Verkuil2018-01-302-6/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the framebuffer is enabled and error injection is disabled, then creating the controls for the video output device would fail with an error. This is because the Clear Framebuffer control uses the 'vivid control class' and that control class isn't added if error injection is disabled. In addition, this control was added to e.g. vbi devices as well, which makes no sense. Move this control to its own control handler and handle it correctly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: dvb_demux: improve debug messagesMauro Carvalho Chehab2018-01-291-21/+22
| | | | | | | | | | | | | | Do some cleanup of debug messages, making them cleaner and easier to be used to analyze what's going on. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: dvb_demux: Better handle discontinuity errorsMauro Carvalho Chehab2018-01-291-2/+6
| | | | | | | | | | | | | | | | | | | | | | When a packet discontinuity happens, it is not just the payload that was lost. The headers are lost too. So, the max size is not 184 but, instead 188. Also, while printing warnings, make a distinction between MPEG-TS indicated discontinuity and detected one. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: cxusb, dib0700: ignore XC2028_I2C_FLUSHMauro Carvalho Chehab2018-01-292-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The XC2028_I2C_FLUSH only needs to be implemented on a few devices. Others can safely ignore it. That prevents filling the dmesg with lots of messages like: dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 Cc: stable@vger.kernel.org Fixes: 4d37ece757a8 ("[media] tuner/xc2028: Add I2C flush callback") Reported-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * media: ts2020: avoid integer overflows on 32 bit machinesMauro Carvalho Chehab2018-01-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before this patch, when compiled for arm32, the signal strength were reported as: Lock (0x1f) Signal= 4294908.66dBm C/N= 12.79dB Because of a 32 bit integer overflow. After it, it is properly reported as: Lock (0x1f) Signal= -58.64dBm C/N= 12.79dB Cc: stable@vger.kernel.org Fixes: 0f91c9d6bab9 ("[media] TS2020: Calculate tuner gain correctly") Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: i2c: ov7740: use gpio/consumer.h instead of gpio.hArnd Bergmann2018-01-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When built on a platform without gpiolib support, we run into a couple of compile errors in ov7740, including: drivers/media/i2c/ov7740.c: In function 'ov7740_set_power': drivers/media/i2c/ov7740.c:307:4: error: implicit declaration of function 'gpiod_direction_output'; did you mean 'gpio_direction_output'? [-Werror=implicit-function-declaration] gpiod_direction_output(ov7740->pwdn_gpio, 0); drivers/media/i2c/ov7740.c:914:4: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'? Changing it to use the correct header file solves the problem. Fixes: 39c5c4471b8d ("media: i2c: Add the ov7740 image sensor driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: entity: Add a nop variant of media_entity_cleanupSakari Ailus2018-01-236-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | Add nop variant of media_entity_cleanup. This allows calling media_entity_cleanup whether or not Media controller is enabled, simplifying driver code. Also drop #ifdefs on a few drivers around media_entity_cleanup(). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: ov5640: fix spurious streamon failuresHugues Fruchet2018-01-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Time to time, stream on is failing with a strange positive error. Error code is returned erroneously by ov5640_set_ctrl_exposure() due to ov5640_get_vts() return value wrongly treated as error. Fix this by forcing ret to 0 after ov5640_get_vts() success call, in order that ret is set to success for rest of code sequence. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: intel-ipu3: cio2: fixup off-by-one bug in cio2_vb2_buf_initYong Zhi2018-01-231-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | With "pages" initialized to vb length + 1 pages, the condition check if(!pages--) will break at one more page than intended, this can result in out-of-bound access to b->lop[i][j] when setting the last dummy page. Fixes: c7cbef1fdb54 ("media: intel-ipu3: cio2: fix a crash with out-of-bounds access") Signed-off-by: Yong Zhi <yong.zhi@intel.com> Signed-off-by: Cao Bing Bu <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: intel-ipu3: cio2: mark more PM functions as __maybe_unusedArnd Bergmann2018-01-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | My earlier patch missed two functions, these must be __maybe_unused as well: drivers/media/pci/intel/ipu3/ipu3-cio2.c:1867:12: error: 'cio2_runtime_resume' defined but not used [-Werror=unused-function] drivers/media/pci/intel/ipu3/ipu3-cio2.c:1849:12: error: 'cio2_runtime_suspend' defined but not used [-Werror=unused-function] Fixes: 2086dd35705f ("media: intel-ipu3: cio2: mark PM functions as __maybe_unused") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: drivers/media/common/videobuf2: rename from videobufHans Verkuil2018-01-2311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | This directory contains the videobuf2 framework, so name the directory accordingly. The name 'videobuf' typically refers to the old and deprecated videobuf version 1 framework so that was confusing. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: cobalt: select CONFIG_SND_PCMArnd Bergmann2018-01-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cobalt sound driver has a dependency on ALSA, but not on the PCM helper code, so this can lead to an extremely rare link error in randconfig builds: ERROR: "snd_pcm_period_elapsed" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "_snd_pcm_stream_lock_irqsave" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_hw_constraint_integer" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_set_ops" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_stream_unlock_irqrestore" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_lib_ioctl" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_new" [drivers/media/pci/cobalt/cobalt.ko] undefined! The other audio drivers select 'SND_PCM' for this, so let's do the same. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: dw9714: annotate a __be16 integer valueMauro Carvalho Chehab2018-01-231-1/+1
| | | | | | | | | | | | | | | | As warned: drivers/media/i2c/dw9714.c: warning: incorrect type in initializer (different base types): => 64:19 Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: dw9714: Remove client field in driver's structSakari Ailus2018-01-231-14/+5
| | | | | | | | | | | | | | | | The client field in driver's struct is redundant. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: dw9714: Call pm_runtime_idle() at the end of probe()Sakari Ailus2018-01-231-0/+1
| | | | | | | | | | | | | | | | | | Call pm_runtime_idle() at the end of the driver's probe() function to enable the device to reach low power state once probe() finishes. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: rc: do not remove first bit if leader pulse is presentSean Young2018-01-234-10/+12
| | | | | | | | | | | | | | | | | | | | | | The rc5 protocol does not have a leading pulse or space, but we encode the first bit using a single leading pulse. For other protocols, the leading pulse or space does not represent any bit. So, don't remove the first bit if a leading pulse is present. Cc: Antti Seppälä <a.seppala@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: rc: clean up leader pulse/space for manchester encodingSean Young2018-01-235-44/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IR rc6 encoder sends the header using manchester encoding using 0 bits, which causes the following: UBSAN: Undefined behaviour in drivers/media/rc/rc-ir-raw.c:247:6 shift exponent 4294967295 is too large for 64-bit type 'long long unsigned int' So, allow the leader code to send a pulse and space and remove the unused pulse_space_start field. Cc: Antti Seppälä <a.seppala@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: lirc: lirc daemon fails to detect raw IR deviceSean Young2018-01-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 9b6192589be7 ("media: lirc: implement scancode sending"), and commit de142c324106 ("media: lirc: implement reading scancode") the lirc features ioctl for raw IR devices advertises two modes for sending and receiving. The lirc daemon now fails to detect a raw IR device, both for transmit and receive. To fix this, do not advertise the scancode mode in the lirc features for raw IR devices (however do keep it for scancode devices). The mode can still be used via the LIRC_SET_{REC,SEND}_MODE ioctl. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: lirc: add module alias for lirc_devSean Young2018-01-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit a60d64b15c20 ("media: lirc: lirc interface should not be a raw decoder"), there is no lirc_dev module any more. On Ubuntu 16.10, the /etc/init.d/lirc startup script attempts to load the lirc_dev module. Since this module does not exist any more, this script fails. Add an alias so the correct module is loaded. Fixes: a60d64b15c20 ("media: lirc: lirc interface should not be a raw decoder") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: lirc: don't kfree the uninitialized pointer txbufColin Ian King2018-01-231-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current error exit path if ir_raw_encode_scancode fails is via the label out_kfree which kfree's an uninitialized pointer txbuf. Fix this by exiting via a new exit path that does not kfree txbuf. Also exit via this new exit path for a failed allocation of txbuf to avoid a redundant kfree on a NULL pointer (to save a bunch of CPU cycles). Detected by: CoverityScan, CID#1463070 ("Uninitialized pointer read") Fixes: f81a8158d4fb ("media: lirc: release lock before sleep") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
| * media: ov5640: add support of RGB565 and YUYV formatsHugues Fruchet2018-01-051-7/+67
| | | | | | | | | | | | | | | | | | Add RGB565 (LE & BE) and YUV422 YUYV format in addition to existing YUV422 UYVY format. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 16:51:20 +0100