| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ADP5585 is a 10/11 input/output port expander with a built in keypad
matrix decoder, programmable logic, reset generator, and PWM generator.
This driver supports the chip by modelling it as an MFD device, with two
child devices for the GPIO and PWM functions.
The driver is derived from an initial implementation from NXP, available
in commit 8059835bee19 ("MLK-25917-1 mfd: adp5585: add ADI adp5585 core
support") in their BSP kernel tree. It has been extensively rewritten.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240722121100.2855-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Linking a file into two modules can have unintended side-effects
and produces a W=1 warning:
scripts/Makefile.build:236: drivers/mfd/Makefile: rsmu_core.o is added to multiple modules: rsmu-i2c rsmu-spi
Make this one a separate module instead.
Fixes: a1867f85e06e ("mfd: Add Renesas Synchronization Management Unit (SMU) support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240529094856.1869543-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The ROHM BD96801 PMIC is highly customizable automotive grade PMIC
which integrates regulator and watchdog funtionalities.
Provide INTB IRQ and register accesses for regulator/watchdog drivers.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/c5260e2dd222e3c64cdf410802bba195637ccb93.1719473802.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|\ \ |
|
| |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Marvell 88PM886 is a PMIC which provides various functions such as
onkey, battery, charger and regulators. It is found for instance in the
samsung,coreprimevelte smartphone with which this was tested. Implement
basic support to allow for the use of regulators and onkey.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240531175109.15599-3-balejk@matfyz.cz
Signed-off-by: Lee Jones <lee@kernel.org>
|
|/
|
|
|
|
|
|
|
|
|
|
|
| |
Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.
The MFD component registers and initializes the device.
Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240620161745.2312359-4-jogletre@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
The MFD component registers and initialises the device and provides
PM/system power management.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-4-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
MFD driver for MAX77541/MAX77540 to enable its sub devices.
The MAX77541 is a multi-function devices. It includes buck converter and ADC.
The MAX77540 is a high-efficiency buck converter with two 3A switching phases.
They have same regmap except for ADC part of MAX77541.
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230412111256.40013-6-okan.sahin@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|\ \
| | |
| | |
| | | |
'ib-mfd-tps6594-core-6.5', 'ib-mfd-regulator-max5970-6.5', 'ib-mfd-regulator-6.5' and 'ib-mfd-power-6.5' into ibs-for-mfd-merged
|
| |/
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch adds support for TPS6594 PMIC MFD core. It provides
communication through the I2C and SPI interfaces, and supports
protocols with embedded CRC data fields for safety applications.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20230511095126.105104-3-jpanis@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add support for SPI connected rk806, which is used by the RK3588
evaluation boards. The PMIC is advertised to support I2C and SPI,
but the evaluation boards all use SPI. Thus only SPI support is
added here.
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-9-sebastian.reichel@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|/
|
|
|
|
|
|
|
|
|
|
| |
Split rk808 into a core and an i2c part in preparation for
SPI support.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-6-sebastian.reichel@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in
the Renesas RZ/G2L family SoCs. It consists of eight 16-bit timer
channels and one 32-bit timer channel. It supports the following
functions
- Counter
- Timer
- PWM
The 8/16/32 bit registers are mixed in each channel.
Add MTU3a core driver for RZ/G2L SoC. The core driver shares the
clk and channel register access for the other child devices like
Counter, PWM and Clock event.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330111632.169434-3-biju.das.jz@bp.renesas.com
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Change MFD support status from Supported to Maintained
New Drivers:
- Add support for the Intel Platform Management Component Interface
(PMCI)
Removed Drivers:
- HTC PASIC3 LED/DS1WM
- Toshiba T7L66XB, TC6387XB and TC6393XB TMIO
New Device Support:
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
New Functionality:
- Provide Reset support to Syscon
Fix-ups:
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration
strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved
register_sys_off_handler() API
Bug Fixes:
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths"
* tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits)
dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332
dt-bindings: mfd: Add NXP BBNSM
mfd: ntxec: Add version number for EC in Tolino Vision
dt-bindings: mfd: syscon: Add mt8365-syscfg
mfd: Remove toshiba tmio drivers
mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
mfd: syscon: Allow reset control for syscon devices
dt-bindings: mfd/syscon: Add resets property
dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration
mfd: axp20x: Switch to the sys-off handler API
mfd: core: Spelling s/compement/complement/
mfd: max8925: Remove the unused function irq_to_max8925()
mfd: qcom-pm8xxx: Remove set but unused variable 'rev'
dt-bindings: mfd: syscon: Document GXP register compatible
mfd: twl4030-power: Drop empty platform remove function
mfd: twl: Fix TWL6032 phy vbus detection
mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
MAINTAINERS: Move MFD from a Supported to Maintaied state
...
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Four separate mfd drivers are in the "tmio" family, and all of
them were used in now-removed PXA machines (eseries, tosa, and
hx4700), so the mfd drivers and all its children can be removed
as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230105134622.254560-19-arnd@kernel.org
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add the mfd driver for the Platform Management Component Interface
(PMCI) based interface of Intel MAX10 BMC controller.
PMCI is a software-visible interface, connected to card BMC which
provided the basic functionality of read/write BMC register. The access
to the register is done indirectly via a hardware controller/bridge
that handles read/write/clear commands and acknowledgments for the
commands.
Previously, intel-m10-bmc provided sysfs under
/sys/bus/spi/devices/... which is generalized in this change because
not all MAX10 BMC appear under SPI anymore.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Co-developed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-11-ilpo.jarvinen@linux.intel.com
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Split the common code from intel-m10-bmc driver into intel-m10-bmc-core
and move the SPI bus parts into an interface specific file.
intel-m10-bmc-core becomes the core MFD functions which can support
multiple bus interface like SPI bus.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Reviewed-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> # hwmon
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-5-ilpo.jarvinen@linux.intel.com
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The htc-pasic3 MFD device was only used in the PXA magician
machine that is now removed, so this can be recycled as well.
Cc: Lee Jones <lee@kernel.org>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The ucb1400 MFD driver and its gpio and touchscreen child
drivers were only used on a few PXA machines that were unused
for a while and are now removed.
Removing these leaves the AC97 support as ALSA specific,
no other drivers are now connected through this interface.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Marek Vasut <marex@denx.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Four separate mfd drivers are in the "tmio" family, and all of
them were used in now-removed PXA machines (eseries, tosa, and
hx4700), so the mfd drivers and all its children can be removed
as well.
Cc: Lee Jones <lee@kernel.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The TPS65219 is a power management IC PMIC designed to supply a wide
range of SoCs in both portable and stationary applications. Any SoC can
control TPS65219 over a standard I2C interface.
It contains the following components:
- Regulators.
- Over Temperature warning and Shut down.
- GPIOs
- Multi Function Pins (MFP)
- power-button
This patch adds support for tps65219 PMIC. At this time only
the functionalities listed below are made available:
- Regulators probe and functionalities
- warm and cold reset support
- SW shutdown support
- Regulator warnings via IRQs
- Power-button via IRQ
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221104152311.1098603-5-jneanne@baylibre.com
|
|
|
|
|
|
|
|
|
|
| |
The HTC Herald machine was removed, so this driver is no
longer used anywhere.
Cc: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221019150410.3851944-17-arnd@kernel.org
|
|
|
|
|
|
|
|
|
|
|
| |
The ASoC davinci voicecodec support is no longer used after
the removal of the dm3xx SoC platform, so the MFD driver is never
selected.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221019152947.3857217-11-arnd@kernel.org
|
|
|
|
|
|
|
|
|
|
|
| |
The DaVinci DM355EVM platform is gone after the removal of all
unused board files, so the MTD device along with its sub-devices
can be removed as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221019152947.3857217-7-arnd@kernel.org
|
|
|
|
|
|
|
|
|
| |
Adds Multi-function devices driver for SMpro co-processor found on the
Mt.Jade hardware reference platform with Ampere's Altra processor family.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220929094321.770125-9-quan@os.amperecomputing.com
|
|
|
|
|
|
|
|
| |
Add Richtek RT5120 PMIC I2C driver.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/1660100142-32493-3-git-send-email-u0084500@gmail.com
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This adds support for the MediaTek MT6370 SubPMIC. MediaTek MT6370 is a
SubPMIC consisting of a single cell battery charger with ADC monitoring,
RGB LEDs, dual channel flashlight, WLED backlight driver, display bias
voltage supply, one general purpose LDO, and the USB Type-C & PD controller
complies with the latest USB Type-C and PD standards.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220805070610.3516-8-peterwu.pub@gmail.com
|
|
|
|
|
|
|
|
|
|
| |
It looks like a random position for couple of Makefile entries that are
disrupting Intel PMIC group. Move them to their own group.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220801114211.36267-3-andriy.shevchenko@linux.intel.com
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The core part is misleading since its only purpose to serve Crystal Cove PMIC,
although for couple of different platforms. Merge core part into crc one.
Advantages among others are:
- speed up a compilation and build
- decreasing the code base
- reducing noise in the namespace by making some data static and const
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220801114211.36267-2-andriy.shevchenko@linux.intel.com
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The VSC7512 is a networking chip that contains several peripherals. Many of
these peripherals are currently supported by the VSC7513 and VSC7514 chips,
but those run on an internal CPU. The VSC7512 lacks this CPU, and must be
controlled externally.
Utilize the existing drivers by referencing the chip as an MFD. Add support
for the two MDIO buses, the internal phys, pinctrl, and serial GPIO.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220905162132.2943088-9-colin.foster@in-advantage.com
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This debugfs isn't used by anyone, if we want to dump the contents
of registers we should just convert the driver to regmap instead.
I'm also excluding this from the device tree bindings when converting
to YAML because it is not a real device, and device trees should
only contain real physical devices.
Delete it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220212214724.681530-1-linus.walleij@linaro.org
|
|
|
|
|
|
|
|
|
| |
Add a simple driver for the Maxim MAX77714 PMIC, supporting RTC and
watchdog only.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant subsystems
all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
kobject documentation: remove default_attrs information
drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
debugfs: lockdown: Allow reading debugfs files that are not world readable
driver core: Make bus notifiers in right order in really_probe()
driver core: Move driver_sysfs_remove() after driver_sysfs_add()
firmware: edd: remove empty default_attrs array
firmware: dmi-sysfs: use default_groups in kobj_type
qemu_fw_cfg: use default_groups in kobj_type
firmware: memmap: use default_groups in kobj_type
sh: sq: use default_groups in kobj_type
headers/uninline: Uninline single-use function: kobject_has_children()
devtmpfs: mount with noexec and nosuid
driver core: Simplify async probe test code by using ktime_ms_delta()
nilfs2: use default_groups in kobj_type
kobject: remove kset from struct kset_uevent_ops callbacks
driver core: make kobj_type constant.
driver core: platform: document registration-failure requirement
vdpa/mlx5: Use auxiliary_device driver data helpers
net/mlx5e: Use auxiliary_device driver data helpers
soundwire: intel: Use auxiliary_device driver data helpers
...
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Intel Platform Monitoring Technology (PMT) support is indicated by presence
of an Intel defined PCIe Designated Vendor Specific Extended Capabilities
(DVSEC) structure with a PMT specific ID. The current MFD implementation
creates child devices for each PMT feature, currently telemetry, watcher,
and crashlog. However DVSEC structures may also be used by Intel to
indicate support for other features. The Out Of Band Management Services
Module (OOBMSM) uses DVSEC to enumerate several features, including PMT.
In order to support them it is necessary to modify the intel_pmt driver to
handle the creation of the child devices more generically. To that end,
modify the driver to create child devices for any VSEC/DVSEC features on
supported devices (indicated by PCI ID). Additionally, move the
implementation from MFD to the Auxiliary bus. VSEC/DVSEC features are
really multifunctional PCI devices, not platform devices as MFD was
designed for. Auxiliary bus gives more flexibility by allowing the
definition of custom structures that can be shared between associated
auxiliary devices and the parent device. Also, rename the driver from
intel_pmt to intel_vsec to better reflect the purpose.
This series also removes the current runtime pm support which was not
complete to begin with. None of the current devices require runtime pm.
However the support will be replaced when a device is added that requires
it.
Reviewed-by: Mark Gross <markgross@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20211208015015.891275-4-david.e.box@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|/
|
|
|
|
|
|
|
|
|
|
| |
The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/cf7dfd98b3403ad363b2b48b57bdbfd57a6416cb.1637066805.git.matti.vaittinen@fi.rohmeurope.com
|
|
|
|
|
|
|
|
| |
Driver was upstreamed in 2013 and never got a user, remove it.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211021192258.21968-4-digetx@gmail.com
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Add support for registering devices via MFD cells to Simple MFD (I2C)
New Drivers:
- Add support for Renesas Synchronization Management Unit (SMU)
New Device Support:
- Add support for N5010 to Intel M10 BMC
- Add support for Cannon Lake to Intel LPSS ACPI
- Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
- Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86
New Functionality:
- Add support for GPIO to Intel LPC ICH
- Add support for Reset to Texas Instruments TPS65086
Fix-ups:
- Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
- Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
- Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
- Pass 'supplied-from' property through axp288_fuel_gauge via swnode
- Remove unused file entry; MAINTAINERS
- Make interrupt line optional; tps65086
- Rename db8500-cpuidle driver symbol; db8500-prcmu
- Remove support for unused hardware; tqmx86
- Provide a standard LPC clock frequency for unknown boards; tqmx86
- Remove unused code; ti_am335x_tscadc
- Use of_iomap() instead of ioremap(); syscon
Bug Fixes:
- Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
- Fix incorrect/misleading frequencies; db8500-prcmu
- Mitigate namespace clash with other GPIOBASE users"
* tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits)
mfd: lpc_sch: Rename GPIOBASE to prevent build error
mfd: syscon: Use of_iomap() instead of ioremap()
dt-bindings: mfd: Add Broadcom CRU
mfd: ti_am335x_tscadc: Delete superfluous error message
mfd: tqmx86: Assume 24MHz LPC clock for unknown boards
mfd: tqmx86: Add support for TQ-Systems DMI IDs
mfd: tqmx86: Add support for TQMx110EB and TQMxE40x
mfd: tqmx86: Fix typo in "platform"
mfd: tqmx86: Remove incorrect TQMx90UC board ID
mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set
mfd: simple-mfd-i2c: Add support for registering devices via MFD cells
mfd/cpuidle: ux500: Rename driver symbol
mfd: tps65086: Add cell entry for reset driver
mfd: tps65086: Make interrupt line optional
dt-bindings: mfd: Convert tps65086.txt to YAML
MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming
mfd: db8500-prcmu: Handle missing FW variant
mfd: db8500-prcmu: Rename register header
mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell
mfd: Don't use irq_create_mapping() to resolve a mapping
...
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add support for ClockMatrix(TM) and 82P33xxx families of timing
and synchronization devices. The access interface can be either
SPI or I2C. Currently, it will create 2 types of MFD devices,
which are to be used by the corresponding rsmu character device
driver and the PTP hardware clock driver, respectively.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|/
|
|
|
|
|
|
|
| |
This driver is ready for mainstream. So, move it out of staging.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/dd150f3ffa19c2dda0171f7dbe1dd63cce2a7af5.1627025657.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
"Core Frameworks:
- Fix Software Node clean-up code
New Drivers:
- Add support for MediaTek MT6359 PMIC
- Add support for Qualcomm PM8008 PMIC
- Add support for Richtek RT4831
New Device Support:
- Add support for Audio CODECs to Rockchip RK817
- Add support for Alder Lake-M to Intel LPSS PCI
- Add support for Periph Device Charge to ChromeOS EC
New Functionality:
- Provide additional IRQs for wcd934x
- Add optional Reset functionality to lp87565
Fix-ups:
- Namespacing & visibility fixes to lp87565
- Differentiate between Power and Home key IRQs in mt6358
- Export I2C device tables in da9052-i2c, stmpe-i2c
- Adapt IRQ flags in max8907, rn5t61, max8907
- Make some functions/devices optional in axp20x, cros_ec_dev
- Explicitly include used header files in ioc3
- Remove superfluous lines in MAINTAINERS, sec-core, st,stm32-timers
- Resolve Kerneldoc issues in omap-usb-host, omap-usb-tll, si476x-cmd, si476x-i2c
- Convert arizona-core to a module
- Copyright changes in hi655x-pmic
- Drop support for board file initialisation in sec-core
- Trivial spelling, whitespace etc updates in lp87565, si476x-cmd,
mt6360-core, wm831x-core, twl-core, db8500-prcmu
- Simplify various implementations of wcd934x, mt6360-core, max8997,
max8998, da9052-i2c, da9062-core, sec-core,
- Device Tree binding changes in google,cros-ec,
richtek,rt4831-backlight, db8500-prcmu, qcom,pm8008, qcom,spmi-pmic
- Use provided APIs to simplify t7l66xb, as3722, da9055-core,
tps80031, 88pm800, 88pm805, asic3, sun6i-prcm, wm831x-core,
wm831x-otp, ucb1x00-assabet, timberdale, sm501, pcf50633-core,
kempld-core, janz-cmodio, intel_soc_pmic_bxtwc, ab8500-core
Bug Fixes:
- Fix unused variable warning in rk817_codec
- Fix regulator voltage configuration in rohm-bd71828
- Fix ongoing freeing of regmap_config 'name' issue in syscon
- Fix error handling path in da9063-i2c
- Fix Kconfig issues in MFD_MP2629
- Fix DMA mask warnings in motorola-cpcap"
* tag 'mfd-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (83 commits)
mfd: cros_ec: Add peripheral device charger
mfd: max8907: Remove IRQF_NO_AUTOEN flag
mfd: ab8500-core: Use DEVICE_ATTR_RO/RW macro
mfd: intel_soc_pmic_bxtwc: Use DEVICE_ATTR_ADMIN_RW macro
mfd: janz-cmodio: Use DEVICE_ATTR_RO macro
mfd: kempld-core: Use DEVICE_ATTR_RO macro
mfd: pcf50633: Use DEVICE_ATTR_ADMIN_RO macro
mfd: sm501: Use DEVICE_ATTR_RO macro
mfd: timberdale: Use DEVICE_ATTR_RO macro
mfd: ucb1x00-assabet: Use DEVICE_ATTR_RO macro
mfd: wm831x: Use DEVICE_ATTR_RO macro
mfd: wm831x: Use DEFINE_RES_IRQ_NAMED() and DEFINE_RES_IRQ() to simplify code
dt-bindings: mfd: stm32-timers: Remove #address/size cells from required properties
mfd: sun6i-prcm: Use DEFINE_RES_MEM() to simplify code
mfd: asic3: Use DEFINE_RES_MEM() and DEFINE_RES_IRQ() to simplify code
mfd: 88pm805: Use DEFINE_RES_IRQ_NAMED() to simplify code
mfd: 88pm800: Use DEFINE_RES_IRQ_NAMED() to simplify code
mfd: tps80031: Use DEFINE_RES_IRQ() to simplify code
mfd: da9055: Use DEFINE_RES_IRQ_NAMED() to simplify code
mfd: as3722: Use DEFINE_RES_IRQ_NAMED() to simplify code
...
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that
integrates all the necessary power management, housekeeping, and
interface support functions into a single IC. Its key features include
overtemperature protection, low-dropout linear regulators, GPIOs, and an
I2C interface.
Add an MFD driver to support it.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
There is no reason why the arizona core,irq and codec model specific
regmap bits cannot be build as a module. All they do is export symbols
which are used by the arizona-spi/i2c and arizona-codec modules, which
themselves can be built as module.
Change the Kconfig and Makefile arizona bits so that the arizona MFD-core
can be built as a module.
This is especially useful on x86 platforms with a WM5102 codec, this
allows the arizona MFD driver necessary for the WM5102 codec to be
enabled in generic distro-kernels without growing the base kernel-image
size.
Note this also adds an explicit "depends on MFD_ARIZONA" to all the
arizona codec Kconfig options. The codec drivers use functions from mfd
arizona-core. These new depends are necessary to disallow the codec
drivers being builtin when the arizona-core is build as a module,
otherwise we end up with missing symbol errors when building vmlinuz.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
| |
| |
| |
| |
| |
| |
| |
| | |
This adds support Richtek RT4831 core. It includes four channel WLED driver
and Display Bias Voltage outputs.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|/
|
|
|
|
|
|
|
|
|
|
|
| |
This driver only covered one scenario in which ACPI devices with _HID
INT3472 are found, and its functionality has been taken over by the
intel-skl-int3472 module, so remove it.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210603224007.120560-7-djrscally@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
|
|
|
|
|
|
|
| |
The ST-Ericsson U300 platform has been removed, so this driver is no
longer needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|\
| |
| |
| | |
Immutable branch between MFD and Watchdog due for the v5.13 merge window
|
| |
| |
| |
| |
| |
| |
| |
| | |
Add core support for ROHM BD9576MUF and BD9573MUF PMICs which are
mainly used to power the R-Car series processors.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
| | | |
| \ | |
|\ \ \
| |_|/
|/| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
'ib-mfd-input-v5.13-1', 'ib-mfd-platform-x86-v5.13', 'ib-mfd-power-v5.13', 'ib-mfd-pwm-rtc-v5.13-1' and 'ib-regulator-list-ramp-helpers-v5.13' into ibs-for-mfd-merged
Immutable branch between MFD, Clock, GPIO, Regulator and RTC due for the v5.13 merge window
Immutable branch between MFD and Extcon due for the v5.13 merge window
Immutable branch between MFD and Input due for the v5.13 merge window
Immutable branch between MFD and Platform/x86 due for the v5.13 merge window
Immutable branch between MFD and Power due for the v5.13 merge window
Immutable branch between MFD, PWM and RTC due for the v5.13 merge window
|
| |/
|/|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The Netronix embedded controller is a microcontroller found in some
e-book readers designed by the original design manufacturer Netronix,
Inc. It contains RTC, battery monitoring, system power management, and
PWM functionality.
This driver implements register access and version detection.
Third-party hardware documentation is available at:
https://github.com/neuschaefer/linux/wiki/Netronix-MSP430-embedded-controller
The EC supports interrupts, but the driver doesn't make use of them so
far.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|