summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci.h (follow)
Commit message (Collapse)AuthorAgeFilesLines
* mmc: sdhci: Allow platform controlled voltage switchingVijay Viswanath2020-07-131-0/+1
| | | | | | | | | | | | If vendor platform drivers are controlling whole logic of voltage switching, then sdhci driver no need control vqmmc regulator. So skip enabling/disable vqmmc from SDHC driver. Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1592919288-1020-2-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-msm: Introduce new ops to dump vendor specific registersSarthak Garg2020-05-281-0/+1
| | | | | | | | | | | Introduce new sdhci ops to dump vendor specific registers in the sdhci_dumpregs during error. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1590139950-7288-8-git-send-email-sartgarg@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: add quirks for be to le byte swappingAngelo Dureghello2020-05-281-0/+3
| | | | | | | | | | | | | Some controller as the ColdFire eshdc may require an endianness byte swap, because DMA read endianness is not configurable. Facilitate using the bounce buffer for this by adding ->copy_to_bounce_buffer(). Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200518191742.1251440-2-angelo.dureghello@timesys.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: use FIELD_GET/PREP for current capabilities bit masksMasahiro Yamada2020-05-281-7/+4
| | | | | | | | | | | | Use FIELD_GET and FIELD_PREP to get access to the register fields. Delete the shift macros and use GENMASK() for the touched macros. Note that, this has the side-effect of changing the constants to 64-bit on 64-bit platforms. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lore.kernel.org/r/20200511062828.1791484-1-yamada.masahiro@socionext.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: host: sdhci: Implement the request_atomic() APIBaolin Wang2020-05-281-0/+1
| | | | | | | | | | | | | | | Implement the request_atomic() ops for the sdhci driver to process one request in the atomic context if the card is nonremovable. Moreover, we should return BUSY flag if controller has not released the inhibit bits to allow HSQ trying to send request again in non-atomic context. Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/9ed34afa9fb42e0c234065cac5401d7826942b55.1586744073.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Reduce maximum time under spinlock in sdhci_send_command()Adrian Hunter2020-05-281-0/+1
| | | | | | | | | | | | | | | | | | | | Spending time under spinlock increases IRQ latencies and also response times because preemption is disabled. sdhci_send_command() waits up to 10 ms under spinlock for inhibit bits to clear. In general inhibit bits will not be set, but there may be corner cases, especially in the face of errors, where waiting helps. There might also be dysfunctional hardware that needs the waiting. So retain the legacy behaviour but do not wait for inhibit bits while under spinlock. Instead adjust the logic to enable waiting while not under spinlock. That is mostly straight forward, but in the interrupt handler it requires deferring an "inhibited" command to the IRQ thread where sleeping is allowed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20200412090349.1607-6-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Stop exporting sdhci_send_command()Adrian Hunter2020-05-281-1/+0
| | | | | | | | | | sdhci_send_command() has not been used outside of sdhci.c for many years. Stop exporting it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20200412090349.1607-3-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: use FIELD_GET/PREP for capabilities bit masksMasahiro Yamada2020-05-281-11/+6
| | | | | | | | | | | | | Use FIELD_GET and FIELD_PREP to get access to the register fields. Delete the shift macros and use GENMASK() for the touched macros. Note that, this has the side-effect of changing the constants to 64-bit on 64-bit platforms. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200408072105.422-2-yamada.masahiro@socionext.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: move SDHCI_CAPABILITIES_1 to a more suitable placeMasahiro Yamada2020-05-281-2/+1
| | | | | | | | | | | | | | | | In the SDHCI specification, the Capabilities Register (Offset 0x40h) is the 64-bit width register, but in Linux, it is represented as two registers, SDHCI_CAPABILITIES and SDHCI_CAPABILITIES_1 so that drivers can use 32-bit register accessors. The upper 32-bit field is associated with SDHCI_CAPABILITIES_1. Move the definition of SDHCI_CAPABILITIES_1 to the correct place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200408072105.422-1-yamada.masahiro@socionext.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: use FIELD_GET for preset value bit masksMasahiro Yamada2020-03-241-6/+4
| | | | | | | | | Use the FIELD_GET macro to get access to the register fields. Delete the shift macros. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lore.kernel.org/r/20200312110050.21732-1-yamada.masahiro@socionext.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()Nicolas Saenz Julienne2020-03-241-0/+3
| | | | | | | | | | | | Some controllers diverge from the standard way of setting power and need their bus voltage register to be configured regardless of the whether they use regulators. As this is a common pattern across sdhci hosts, create a helper function. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200306174413.20634-2-nsaenzjulienne@suse.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: Replace zero-length array with flexible-array memberGustavo A. R. Silva2020-03-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200226223125.GA20630@embeddedor Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: host: sdhci: Add a variable to defer to complete requests if neededBaolin Wang2020-03-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | When using the host software queue, it will trigger the next request in irq handler without a context switch. But the sdhci_request() can not be called in interrupt context when using host software queue for some host drivers, due to the get_cd() ops can be sleepable. But for some host drivers, such as Spreadtrum host driver, the card is nonremovable, so the get_cd() ops is not sleepable, which means we can complete the data request and trigger the next request in irq handler to remove the context switch for the Spreadtrum host driver. As suggested by Adrian, we should introduce a request_atomic() API to indicate that a request can be called in interrupt context to remove the context switch when using mmc host software queue. But this should be done in another thread to convert the users of mmc host software queue. Thus we can introduce a variable in struct sdhci_host to indicate that we will always to defer to complete requests when using the host software queue. Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/e693e7a29beb3c1922b333f4603ea81f43d5c5b1.1581478568.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: host: sdhci: Add request_done ops for struct sdhci_opsBaolin Wang2020-03-241-0/+2
| | | | | | | | | | | | Add request_done ops for struct sdhci_ops as a preparation in case some host controllers have different method to complete one request, such as supporting request completion of MMC software queue. Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/1539c801c8bbdbcd1d86f8c2dab375f5803c765a.1581478568.git.baolin.wang7@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Let a vendor driver supply and update ADMA descriptor sizeVeerabhadrarao Badiganti2020-01-241-1/+2
| | | | | | | | | | | | | | | | | | | Let a vendor driver supply the maximum descriptor size that it can operate on. ADMA descriptor table would be allocated using this supplied size. If any SD Host controller is of version prior to v4.10 spec but supports 16byte descriptor, this change allows them to supply correct descriptor size for ADMA table allocation. Also let a vendor driver update the descriptor size by overriding sdhc_host->desc_size if it has to operates on a different descriptor sizes in different conditions. Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1579531122-28341-1-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Refactor sdhci_set_timeout()Faiz Abbas2020-01-201-0/+1
| | | | | | | | | | | Refactor sdhci_set_timeout() such that platform drivers can do some functionality in a set_timeout() callback and then call __sdhci_set_timeout() to complete the operation. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-7-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Convert sdhci_set_timeout_irq() to non-staticFaiz Abbas2020-01-201-0/+1
| | | | | | | | | Export sdhci_set_timeout_irq() so that it is accessible from platform drivers. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-6-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: add support for using external DMA devicesChunyan Zhang2020-01-201-0/+8
| | | | | | | | | | | | | | | | | | | | | | Some standard SD host controllers can support both external dma controllers as well as ADMA/SDMA in which the SD host controller acts as DMA master. TI's omap controller is the case as an example. Currently the generic SDHCI code supports ADMA/SDMA integrated in the host controller but does not have any support for external DMA controllers implemented using dmaengine, meaning that custom code is needed for any systems that use an external DMA controller with SDHCI. Fixes by Faiz Abbas <faiz_abbas@ti.com>: 1. Map scatterlists before dmaengine_prep_slave_sg() 2. Use dma_async() functions inside of the send_command() path and call terminate_sync() in non-atomic context in case of an error. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-4-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Add a quirk for broken command queuingAdrian Hunter2019-12-181-0/+2
| | | | | | | | | | | | | | | Command queuing has been reported broken on some systems based on Intel GLK. A separate patch disables command queuing in some cases. This patch adds a quirk for broken command queuing, which enables users with problems to disable command queuing using sdhci module parameters for quirks. Fixes: 8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191217095349.14592-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Let drivers define their DMA maskAdrian Hunter2019-09-271-0/+1
| | | | | | | | | | | Add host operation ->set_dma_mask() so that drivers can define their own DMA masks. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Cc: stable@vger.kernel.org # v4.15 + Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Convert to use sdio_irq_claimed()Ulf Hansson2019-09-111-1/+0
| | | | | | | | | Instead of keeping track of whether SDIO IRQs have been enabled via an internal sdhci status flag, avoid the open-coding and convert into using sdio_irq_claimed(). Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Drop redundant code for SDIO IRQsUlf Hansson2019-09-111-5/+0
| | | | | | | | | | | | | | | | Nowadays sdhci prevents runtime suspend when SDIO IRQs are enabled. However, some variants such as sdhci-esdhc-imx's, tries to allow runtime suspend while having the SDIO IRQs enabled, but without supporting remote wakeups. This support is a bit questionable, especially if the host device have a PM domain attached that can be power gated, but more importantly, the code have also become redundant (which was not the case when it was introduced). Rather than keeping the redundant code around, let's drop it and leave this to be revisited later on. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: constify references of parameters to __sdhci_read_caps()Masahiro Yamada2019-09-111-2/+2
| | | | | | | | | | | __sdhci_read_caps() does not modify *ver, *caps, or *caps1. Probably, the caller of this function will want to constifythe parameters passed in. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Export sdhci_abort_tuning function symbolBen Chuang2019-09-111-0/+1
| | | | | | | | | | | Export sdhci_abort_tuning() function symbols which are used by other SD Host controller driver modules. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Co-developed-by: Michael K Johnson <johnsonm@danlj.org> Signed-off-by: Michael K Johnson <johnsonm@danlj.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Add PLL Enable support to internal clock setupBen Chuang2019-09-111-0/+1
| | | | | | | | | | | | | The GL9750 and GL9755 chipsets, and possibly others, require PLL Enable setup as part of the internal clock setup as described in 3.2.1 Internal Clock Setup Sequence of SD Host Controller Simplified Specification Version 4.20. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Co-developed-by: Michael K Johnson <johnsonm@danlj.org> Signed-off-by: Michael K Johnson <johnsonm@danlj.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resumingBaolin Wang2019-08-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | The SD host controller specification defines 3 types software reset: software reset for data line, software reset for command line and software reset for all. Software reset for all means this reset affects the entire Host controller except for the card detection circuit. In sdhci_runtime_resume_host() we always do a software "reset for all", which causes the Spreadtrum variant controller to work abnormally after resuming. To fix the problem, let's do a software reset for the data and the command part, rather than "for all". However, as sdhci_runtime_resume() is a common sdhci function and we don't want to change the behaviour for other variants, let's introduce a new in-parameter for it. This enables the caller to decide if a "reset for all" shall be done or not. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Fix indenting on SDHCI_CTRL_8BITBUSRaul E Rangel2019-06-181-1/+1
| | | | | | | | | Remove whitespace in front of SDHCI_CTRL_8BITBUS. The value is not part of SDHCI_CTRL_DMA_MASK. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-301-5/+1
| | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: sdhci: Remove finish_taskletAdrian Hunter2019-04-151-1/+2
| | | | | | | | | | Remove finish_tasklet. Requests that require DMA-unmapping or sdhci_reset are completed either in the IRQ thread or a workqueue if the completion is not initiated by the IRQ. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: allow host to specify maximum tuning loopsSowjanya Komatineni2019-04-151-0/+1
| | | | | | | | | | | | | | | | | | | | As per the Host Controller Standard Specification Version 4.20, limitation of tuning iteration count is removed as PLL locking time can be longer than UHS-1 tuning due to larger PVT fluctuation and it will result in increase of tuning iteration to complete the tuning. This patch creates sdhci_host member tuning_loop_count to allow hosts to specify maximum tuning iterations and also updates execute_tuning to use this specified maximum tuning iteration count. Default tuning_loop_count is set to same as existing loop count of MAX_TUNING_LOOP which is 40 iterations. Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Add ADMA3 DMA support for V4 enabled hostSowjanya Komatineni2019-02-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Below are the supported DMA types in Host Control1 Register with Version 4 enable b'00 - SDMA b'01 - Not Used b'10 - ADMA2 b'11 - ADMA2 or ADMA3 ADMA3 uses Command Descriptor to issue an SD command. A multi-block data transfer is performed by using a pair of CMD descriptor and ADMA2 descriptor. ADMA3 performs multiple of multi-block data transfer by using Integrated Descriptor which is more suitable for Command Queuing to fetch both Command and Transfer descriptors. Host Capabilities register indicates the supports of ADMA3 DMA. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Fix O2 Host PLL and card detect issueErnest Zhang(WH)2019-02-251-0/+4
| | | | | | | | | | | 1. O2 Host Controller PLL lock status is not in compliance with CLOCK_CONTROL register bit 1 2. O2 Host Controller card detect function only work when PLL is enabled and locked Signed-off-by: Ernest Zhang <ernest.zhang@bayhubtech.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Add quirk to disable LED controlAdrian Hunter2018-12-171-0/+2
| | | | | | | | | Host controllers may not have a LED signal line, whereas the register updates to control the non-existent LED can be relatively time consuming. Add a quirk to disable LED control. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Handle auto-command errorsAdrian Hunter2018-12-171-1/+6
| | | | | | | | | | | If the host controller supports auto-commands then enable the auto-command error interrupt and handle it. In the case of auto-CMD23, the error is treated the same as manual CMD23 error. In the case of auto-CMD12, commands-during-transfer are not permitted, so the error handling is treated the same as a data error. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Rename SDHCI_ACMD12_ERR and SDHCI_INT_ACMD12ERRAdrian Hunter2018-12-171-2/+2
| | | | | | | | | The SDHCI_ACMD12_ERR register is used for auto-CMD23 and auto-CMD12 errors, as is the SDHCI_INT_ACMD12ERR interrupt bit. Rename them to SDHCI_AUTO_CMD_STATUS and SDHCI_INT_AUTO_CMD_ERR respectively. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Add Auto CMD Auto Select supportChunyan Zhang2018-10-081-0/+2
| | | | | | | | | | | | | | | | | As SD Host Controller Specification v4.10 documents: Host Controller Version 4.10 defines this "Auto CMD Auto Select" mode. Selection of Auto CMD depends on setting of CMD23 Enable in the Host Control 2 register which indicates whether card supports CMD23. If CMD23 Enable =1, Auto CMD23 is used and if CMD23 Enable =0, Auto CMD12 is used. In case of Version 4.10 or later, use of Auto CMD Auto Select is recommended rather than use of Auto CMD12 Enable or Auto CMD23 Enable. This patch add this new mode support. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Add 32-bit block count support for v4 modeChunyan Zhang2018-10-081-0/+8
| | | | | | | | | | | | | | | Host Controller Version 4.10 re-defines SDMA System Address register as 32-bit Block Count for v4 mode, and SDMA uses ADMA System Address register (05Fh-058h) instead if v4 mode is enabled. Also when using 32-bit block count, 16-bit block count register need to be set to zero. Since using 32-bit Block Count would cause problems for auto-cmd23, it can be chosen via host->quirk2. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Add ADMA2 64-bit addressing support for V4 modeChunyan Zhang2018-10-081-2/+10
| | | | | | | | | | | | | | | ADMA2 64-bit addressing support is divided into V3 mode and V4 mode. So there are two kinds of descriptors for ADMA2 64-bit addressing i.e. 96-bit Descriptor for V3 mode, and 128-bit Descriptor for V4 mode. 128-bit Descriptor is aligned to 8-byte. For V4 mode, ADMA2 64-bit addressing is enabled via Host Control 2 register. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> [Ulf: Fixed conflict while applying] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Add sd host v4 modeChunyan Zhang2018-10-081-0/+3
| | | | | | | | | | | For SD host controller version 4.00 or later ones, there're two modes of implementation - Version 3.00 compatible mode or Version 4 mode. This patch introduced an interface to enable v4 mode. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Add version V4 definitionChunyan Zhang2018-10-081-0/+3
| | | | | | | | Added definitions for v400, v410, v420. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: introduce adma_write_desc() hook to struct sdhci_opsJisheng Zhang2018-10-081-0/+4
| | | | | | | | | | | | Add this hook so that it can be overridden with driver specific implementations. We also let the original sdhci_adma_write_desc() accept &desc so that the function can set its new value. Then export the function so that it could be reused by driver's specific implementations. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: add adma_table_cnt member to struct sdhci_hostJisheng Zhang2018-10-081-0/+3
| | | | | | | | | | | This patch adds adma_table_cnt member to struct sdhci_host to give more flexibility to drivers to control the ADMA table count. Default value of adma_table_cnt is set to (SDHCI_MAX_SEGS * 2 + 1). Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Export sdhci_request()Aapo Vienamo2018-10-081-0/+1
| | | | | | | | | Allow SDHCI drivers to hook code before and after sdhci_request() by making it externally visible. Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: add tuning error codesYinbo Zhu2018-10-081-0/+1
| | | | | | | | | This patch is to add tuning error codes to judge tuning state Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Export sdhci tuning function symbolernest.zhang2018-07-301-0/+5
| | | | | | | | | Export sdhci tuning function symbols which are used by other SD Host controller driver modules. Signed-off-by: ernest.zhang <ernest.zhang@bayhubtech.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Program a relatively accurate SW timeout valueKishon Vijay Abraham I2018-05-031-0/+10
| | | | | | | | | | | | sdhci has a 10 second timeout to catch devices that stop responding. In the case of quirk SDHCI_QUIRK2_DISABLE_HW_TIMEOUT, instead of programming 10 second arbitrary value, calculate the total time it would take for the entire transfer to happen and program the timeout value accordingly. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Add quirk to disable HW timeoutAdrian Hunter2018-05-031-0/+5
| | | | | | | | | | | | | Add quirk to disable HW timeout if the requested timeout is more than the maximum obtainable timeout. Also, if the quirk is set and ->get_max_timeout_count() is not implemented, max_busy_timeout is set to zero. Based-on-patch-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Implement an SDHCI-specific bounce bufferLinus Walleij2018-01-311-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bounce buffer is gone from the MMC core, and now we found out that there are some (crippled) i.MX boards out there that have broken ADMA (cannot do scatter-gather), and also broken PIO so they must use SDMA. Closer examination shows a less significant slowdown also on SDMA-only capable Laptop hosts. SDMA sets down the number of segments to one, so that each segment gets turned into a singular request that ping-pongs to the block layer before the next request/segment is issued. Apparently it happens a lot that the block layer send requests that include a lot of physically discontiguous segments. My guess is that this phenomenon is coming from the file system. These devices that cannot handle scatterlists in hardware can see major benefits from a DMA-contiguous bounce buffer. This patch accumulates those fragmented scatterlists in a physically contiguous bounce buffer so that we can issue bigger DMA data chunks to/from the card. When tested with a PCI-integrated host (1217:8221) that only supports SDMA: 0b:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05) This patch gave ~1Mbyte/s improved throughput on large reads and writes when testing using iozone than without the patch. dmesg: sdhci-pci 0000:0b:00.0: SDHCI controller found [1217:8221] (rev 5) mmc0 bounce up to 128 segments into one, max segment size 65536 bytes mmc0: SDHCI controller on PCI [0000:0b:00.0] using DMA On the i.MX SDHCI controllers on the crippled i.MX 25 and i.MX 35 the patch restores the performance to what it was before we removed the bounce buffers. Cc: Pierre Ossman <pierre@ossman.eu> Cc: Benoît Thébaudeau <benoit@wsystem.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Benjamin Beckmeyer <beckmeyer.b@rittal.de> Cc: stable@vger.kernel.org # v4.14+ Fixes: de3ee99b097d ("mmc: Delete bounce buffer handling") Tested-by: Benjamin Beckmeyer <beckmeyer.b@rittal.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Handle failure of enable_irq_wake()Adrian Hunter2018-01-171-0/+1
| | | | | | | | | | | | Now that sdhci_enable_irq_wakeups() is a local function, change it to return whether the IRQ wakeup was successfully enabled. This is in preparation for adding more conditions for whether IRQ wakeup is enabled. Note it is assumed, for SDHCI devices, that suspend is more important than wakeup, so we continue to suspend regardless. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Stop exporting sdhci_enable_irq_wakeups()Adrian Hunter2018-01-171-1/+0
| | | | | | | Now that it is not being used by any drivers, stop exporting it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 20:14:55 +0100