summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/omap2.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* mtd: nand: use dev_get_platdata()Jingoo Han2013-08-301-1/+1
| | | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: remove NAND_BBT_SCANEMPTYBrian Norris2013-08-301-1/+1
| | | | | | | | | | | | | | | | | | NAND_BBT_SCANEMPTY is a strange, badly-supported option with omap as its single remaining user. NAND_BBT_SCANEMPTY was likely used by accident in omap2[1]. And anyway, omap2 doesn't scan the chip for bad blocks (courtesy of NAND_SKIP_BBTSCAN), and so its use of this option is irrelevant. This patch drops the NAND_BBT_SCANEMPTY option. [1] http://lists.infradead.org/pipermail/linux-mtd/2012-July/042902.html Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: omap2: remove unnecessary platform_set_drvdata()Jingoo Han2013-08-051-1/+0
| | | | | | | | | | | The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: omap2: use msecs_to_jiffies()Toan Pham2013-04-051-2/+2
| | | | | | | | | | Fix mtd-utils from returning -EIO. Formatting jffs2 filesystem was impossible when CONFIG_HZ was set to a low value. Signed-off-by: Toan Pham <tpham3783@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: devices: elm: check for device's presence before configurationDaniel Mack2013-04-051-2/+3
| | | | | | | | | | | | | | In case the driver is not probed - due to config mismatches or errors in the DTS files - dev_get_drvdata() returns NULL, leading to an Ooops during boot. Make elm_config() return an error in such cases to propagate the error up to the user, so it can fall back to software mode. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge tag 'for-linus-20130301' of git://git.infradead.org/linux-mtdLinus Torvalds2013-03-031-42/+541
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD update from David Woodhouse: "Fairly unexciting MTD merge for 3.9: - misc clean-ups in the MTD command-line partitioning parser (cmdlinepart) - add flash locking support for STmicro chips serial flash chips, as well as for CFI command set 2 chips. - new driver for the ELM error correction HW module found in various TI chips, enable the OMAP NAND driver to use the ELM HW error correction - added number of new serial flash IDs - various fixes and improvements in the gpmi NAND driver - bcm47xx NAND driver improvements - make the mtdpart module actually removable" * tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits) mtd: map: BUG() in non handled cases mtd: bcm47xxnflash: use pr_fmt for module prefix in messages mtd: davinci_nand: Use managed resources mtd: mtd_torturetest can cause stack overflows mtd: physmap_of: Convert device allocation to managed devm_kzalloc() mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement. mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional. mtd: atmel_nand: avoid to report an error when lookup table offset is 0. mtd: bcm47xxsflash: adjust names of bus-specific functions mtd: bcm47xxpart: improve probing of nvram partition mtd: bcm47xxpart: add support for other erase sizes mtd: bcm47xxnflash: register this as normal driver mtd: bcm47xxnflash: fix message mtd: bcm47xxsflash: register this as normal driver mtd: bcm47xxsflash: write number of written bytes mtd: gpmi: add sanity check for the ECC mtd: gpmi: set the Golois Field bit for mx6q's BCH mtd: devices: elm: Removes <xx> literals in elm DT node mtd: gpmi: fix a dereferencing freed memory error mtd: fix the wrong timeo for panic_nand_wait() ...
| * mtd: nand: omap2: Support for hardware BCH error correction.Philip Avinash2013-02-041-39/+534
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELM module can be used for hardware error correction of BCH 4 & 8 bit. ELM module functionality is verified by checking the availability of handle for ELM module in device tree. Hence supporting 1. ELM module available, BCH error correction done by ELM module. Also support read & write page in one shot by adding custom read_page and write_page methods. This helps in optimizing code for NAND flashes with page size less than 4 KB. 2. If ELM module not available fall back to software BCH error correction support. New structure member is added to omap_nand_info 1. "is_elm_used" to know the status of whether the ELM module is used for error correction or not. 2. "elm_dev" device pointer to elm device on detection of ELM module. Also being here update the device tree documentation of gpmc-nand for adding optional property elm_id. Note: ECC layout uses 1 extra bytes for 512 byte of data to handle erased pages. Extra byte programmed to zero for programmed pages. Also BCH8 requires 14 byte ecc to maintain compatibility with RBL ECC layout. This results a common ecc layout across RBL, U-boot & Linux with BCH8. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: nand: omap2: Update nerrors using ecc.strengthPhilip Avinash2013-02-041-4/+8
| | | | | | | | | | | | | | | | | | | | Remove check of ecc bytes with 13, number of errors can directly update from nand ecc strength. This will increase re-usability of the code. Also add macro definitions BCH8_ERROR_MAX & BCH4_ERROR_MAX for better readability and cleaner code. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* | mtd: omap-nand: pass device_node in platform dataDaniel Mack2013-01-141-1/+3
|/ | | | | | | | | | | | | | Pass an optional device_node pointer in the platform data, which in turn will be put into a mtd_part_parser_data. This way, code that sets up the platform devices can pass along the node from DT so that the partitions can be parsed. For non-DT boards, this change has no effect. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtdLinus Torvalds2012-12-191-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from David Woodhouse: - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim * tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits) mtd: nand: typo in nand_id_has_period() comments mtd: nand/gpio: use io{read,write}*_rep accessors mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited. mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems mtd: nand/docg4: fix and improve read of factory bbt mtd: nand/docg4: reserve bb marker area in ecclayout mtd: nand/docg4: add support for writing in reliable mode mtd: mxc_nand: reorder part_probes to let cmdline override other sources mtd: mxc_nand: fix unbalanced clk_disable() in error path mtd: nandsim: Introduce debugfs infrastructure mtd: physmap_of: error checking to prevent a NULL pointer dereference mtg: docg3: potential divide by zero in doc_write_oob() mtd: bcm47xxnflash: writing support mtd: tests/read: initialize buffer for whole next page mtd: at91: atmel_nand: return bit flips for the PMECC read_page() mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c mtd: nand: onfi need to be probed in 8 bits mode mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width mtd: nand: print flash size during detection mted: nand_wait_ready timeout fix ...
| * mtd: remove use of __devinitBill Pemberton2012-11-221-1/+1
| | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* | ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.hTony Lindgren2012-11-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge branch 'omap-for-v3.8/cleanup-headers-gpmc' into ↵Tony Lindgren2012-10-171-21/+104
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap-for-v3.8/cleanup-headers Conflicts: arch/arm/mach-omap2/board-3430sdp.c arch/arm/mach-omap2/board-h4.c arch/arm/mach-omap2/board-rx51-peripherals.c arch/arm/mach-omap2/board-rx51.c arch/arm/mach-omap2/pm34xx.c drivers/mtd/nand/omap2.c drivers/mtd/onenand/omap2.c
| * | mtd: nand: omap: handle gpmc bch[48]Afzal Mohammed2012-10-151-11/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gpmc-nand bch registers are now available in driver, make use of it to handle bch[48] instead of relying on gpmc exported functions. And so nand driver no longer needs gpmc header, remove it. Signed-off-by: Afzal Mohammed <afzal@ti.com>
| * | mtd: nand: omap: bring in gpmc nand macrosAfzal Mohammed2012-10-151-8/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | Bring onto driver the macros defined in gpmc.h that are not necessary outside driver, helps in removing inclusion of gpmc.h too. Also remove GPMC prefix on those macros to make clear it's independence with gpmc header. Signed-off-by: Afzal Mohammed <afzal@ti.com>
| * | mtd: nand: omap: read nand using register addressAfzal Mohammed2012-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that gpmc-nand registers are available in driver, use it to read nand data. "65b97cf mtd: nand: omap2: handle nand on gpmc" modified all other instances. After initial versions of that patch, a new change added reading nand data using gpmc exposed function. In the final version this change was not taken care. Signed-off-by: Afzal Mohammed <afzal@ti.com>
| * | mtd: nand: omap: free region as per resource sizeAfzal Mohammed2012-10-151-1/+1
| |/ | | | | | | | | | | | | memory as is now obtained via resource, upon freeing use resource size. This also helps get rid of one macro. Signed-off-by: Afzal Mohammed <afzal@ti.com>
* | ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.hLokesh Vutla2012-10-151-1/+1
| | | | | | | | | | | | | | | | Move plat/dma.h to plat-omap/dma-omap.h as part of single zImage work Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: DMA: Moving OMAP2+ DMA channel definitions to mach-omap2Lokesh Vutla2012-10-151-0/+2
|/ | | | | | | | | | | Similar to omap1, some of the omap2+ dma channel definitions are used by some drivers. For moving omap2+ dma channel definitions to mach-omap2/, the used ones should be defined locally to driver. Drivers can eliminate it using DT, platform data, or IORESOURCE_DMA And moving omap2+ DMA channel definitions to mach-omap2 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'disintegrate-mtd-20121009' of ↵David Woodhouse2012-10-091-77/+226
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/dhowells/linux-headers UAPI Disintegration 2012-10-09 Conflicts: MAINTAINERS arch/arm/configs/bcmring_defconfig arch/arm/mach-imx/clk-imx51-imx53.c drivers/mtd/nand/Kconfig drivers/mtd/nand/bcm_umi_nand.c drivers/mtd/nand/nand_bcm_umi.h drivers/mtd/nand/orion_nand.c
| * ARM: omap: move platform_data definitionsArnd Bergmann2012-09-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
| * mtd: nand: omap2: use gpmc provided irqsAfzal Mohammed2012-08-301-28/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | GPMC platform initialization provides it's clients with interrupts that can be used through struct resource. Make use of it for irq mode functionality. Also now write protect disable is done by GPMC, hence remove it. Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> [tony@atomide.com: updated to fix new warnings introduced] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * mtd: nand: omap2: obtain memory from resourceAfzal Mohammed2012-08-301-4/+15
| | | | | | | | | | | | | | | | | | | | gpmc initialization done by platform code now updates struct resource with the address space alloted for nand. Use this interface to obtain memory rather than relying on platform data field - phys_base. Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * mtd: nand: omap2: handle nand on gpmcAfzal Mohammed2012-08-301-45/+161
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPMC platform initialization has been modified to fill NAND platform data with GPMC NAND register details. As these registers are accessible in NAND driver itself, configure NAND in GPMC by itself. Modified prefetch and ecc functions are logically same as the corresponding exported symbols from GPMC code. Note: Verfying that other CS have not yet enabled for prefetch & ecc has to be incorporated. Currently this causes no issues as there are no boards that use NAND on multiple CS. With ongoing GPMC driver migration, perhaps it would be better to consider NAND connected on multiple CS as a single peripheral using multiple CS. This would make handling multiple CS issues easier. Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | mtd: omap2: fix module loadingAndreas Bießmann2012-09-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unloading the omap2 nand driver missed to release the memory region which will result in not being able to request it again if one want to load the driver later on. This patch fixes following error when loading omap2 module after unloading: ---8<--- ~ $ rmmod omap2 ~ $ modprobe omap2 [ 37.420928] omap2-nand: probe of omap2-nand.0 failed with error -16 ~ $ --->8--- This error was introduced in 67ce04bf2746f8a1f8c2a104b313d20c63f68378 which was the first commit of this driver. Signed-off-by: Andreas Bießmann <andreas@biessmann.de> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd: omap2: fix omap_nand_remove segfaultAndreas Bießmann2012-09-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not kfree() the mtd_info; it is handled in the mtd subsystem and already freed by nand_release(). Instead kfree() the struct omap_nand_info allocated in omap_nand_probe which was not freed before. This patch fixes following error when unloading the omap2 module: ---8<--- ~ $ rmmod omap2 ------------[ cut here ]------------ kernel BUG at mm/slab.c:3126! Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: omap2(-) CPU: 0 Not tainted (3.6.0-rc3-00230-g155e36d-dirty #3) PC is at cache_free_debugcheck+0x2d4/0x36c LR is at kfree+0xc8/0x2ac pc : [<c01125a0>] lr : [<c0112efc>] psr: 200d0193 sp : c521fe08 ip : c0e8ef90 fp : c521fe5c r10: bf0001fc r9 : c521e000 r8 : c0d99c8c r7 : c661ebc0 r6 : c065d5a4 r5 : c65c4060 r4 : c78005c0 r3 : 00000000 r2 : 00001000 r1 : c65c4000 r0 : 00000001 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 86694019 DAC: 00000015 Process rmmod (pid: 549, stack limit = 0xc521e2f0) Stack: (0xc521fe08 to 0xc5220000) fe00: c008a874 c00bf44c c515c6d0 200d0193 c65c4860 c515c240 fe20: c521fe3c c521fe30 c008a9c0 c008a854 c521fe5c c65c4860 c78005c0 bf0001fc fe40: c780ff40 a00d0113 c521e000 00000000 c521fe84 c521fe60 c0112efc c01122d8 fe60: c65c4860 c0673778 c06737ac 00000000 00070013 00000000 c521fe9c c521fe88 fe80: bf0001fc c0112e40 c0673778 bf001ca8 c521feac c521fea0 c02ca11c bf0001ac fea0: c521fec4 c521feb0 c02c82c4 c02ca100 c0673778 bf001ca8 c521fee4 c521fec8 fec0: c02c8dd8 c02c8250 00000000 bf001ca8 bf001ca8 c0804ee0 c521ff04 c521fee8 fee0: c02c804c c02c8d20 bf001924 00000000 bf001ca8 c521e000 c521ff1c c521ff08 ff00: c02c950c c02c7fbc bf001d48 00000000 c521ff2c c521ff20 c02ca3a4 c02c94b8 ff20: c521ff3c c521ff30 bf001938 c02ca394 c521ffa4 c521ff40 c009beb4 bf001930 ff40: c521ff6c 70616d6f b6fe0032 c0014f84 70616d6f b6fe0032 00000081 60070010 ff60: c521ff84 c521ff70 c008e1f4 c00bf328 0001a004 70616d6f c521ff94 0021ff88 ff80: c008e368 0001a004 70616d6f b6fe0032 00000081 c0015028 00000000 c521ffa8 ffa0: c0014dc0 c009bcd0 0001a004 70616d6f bec2ab38 00000880 bec2ab38 00000880 ffc0: 0001a004 70616d6f b6fe0032 00000081 00000319 00000000 b6fe1000 00000000 ffe0: bec2ab30 bec2ab20 00019f00 b6f539c0 60070010 bec2ab38 aaaaaaaa aaaaaaaa Backtrace: [<c01122cc>] (cache_free_debugcheck+0x0/0x36c) from [<c0112efc>] (kfree+0xc8/0x2ac) [<c0112e34>] (kfree+0x0/0x2ac) from [<bf0001fc>] (omap_nand_remove+0x5c/0x64 [omap2]) [<bf0001a0>] (omap_nand_remove+0x0/0x64 [omap2]) from [<c02ca11c>] (platform_drv_remove+0x28/0x2c) r5:bf001ca8 r4:c0673778 [<c02ca0f4>] (platform_drv_remove+0x0/0x2c) from [<c02c82c4>] (__device_release_driver+0x80/0xdc) [<c02c8244>] (__device_release_driver+0x0/0xdc) from [<c02c8dd8>] (driver_detach+0xc4/0xc8) r5:bf001ca8 r4:c0673778 [<c02c8d14>] (driver_detach+0x0/0xc8) from [<c02c804c>] (bus_remove_driver+0x9c/0x104) r6:c0804ee0 r5:bf001ca8 r4:bf001ca8 r3:00000000 [<c02c7fb0>] (bus_remove_driver+0x0/0x104) from [<c02c950c>] (driver_unregister+0x60/0x80) r6:c521e000 r5:bf001ca8 r4:00000000 r3:bf001924 [<c02c94ac>] (driver_unregister+0x0/0x80) from [<c02ca3a4>] (platform_driver_unregister+0x1c/0x20) r5:00000000 r4:bf001d48 [<c02ca388>] (platform_driver_unregister+0x0/0x20) from [<bf001938>] (omap_nand_driver_exit+0x14/0x1c [omap2]) [<bf001924>] (omap_nand_driver_exit+0x0/0x1c [omap2]) from [<c009beb4>] (sys_delete_module+0x1f0/0x2ec) [<c009bcc4>] (sys_delete_module+0x0/0x2ec) from [<c0014dc0>] (ret_fast_syscall+0x0/0x48) r8:c0015028 r7:00000081 r6:b6fe0032 r5:70616d6f r4:0001a004 Code: e1a00005 eb0d9172 e7f001f2 e7f001f2 (e7f001f2) ---[ end trace 6a30b24d8c0cc2ee ]--- Segmentation fault --->8--- This error was introduced in 67ce04bf2746f8a1f8c2a104b313d20c63f68378 which was the first commit of this driver. Signed-off-by: Andreas Bießmann <andreas@biessmann.de> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd: kill MTD_NAND_VERIFY_WRITEHuang Shijie2012-09-291-23/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just as Artem suggested: "Both UBI and JFFS2 are able to read verify what they wrote already. There are also MTD tests which do this verification. So I think there is no reason to keep this in the NAND layer, let alone wasting RAM in the driver to support this feature. Besides, it does not work for sub-pages and many drivers have it broken. It hurts more than it provides benefits." So kill MTD_NAND_VERIFY_WRITE entirely. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd: omap2: fix some typos in commentsPeter Meerwald2012-09-291-5/+5
|/ | | | | | Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd/omap2: fix dmaengine_slave_config error handlingArnd Bergmann2012-08-101-4/+3
| | | | | | | | | | | | | | | | | The newly added dmaengine support in the omap2 nand driver potentially causes an undefined return value from the omap_nand_probe function when dmaengine_slave_config reports an error. Let's handle this by returning the same error back to the caller. Without this patch, building omap2plus_defconfig results in: drivers/mtd/nand/omap2.c: In function 'omap_nand_probe': drivers/mtd/nand/omap2.c:1154:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Grazvydas Ignotas <notasas@gmail.com>
* mtd: omap2: remove private DMA API implementationRussell King2012-07-311-110/+26
| | | | | | | Remove the private DMA API implementation from nand/omap2.c making it use entirely the DMA engine API. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* mtd: omap2: add DMA engine supportRussell King2012-07-311-1/+91
| | | | | | | | | | Add DMA engine support to the OMAP2 NAND driver. This supplements the private DMA API implementation contained within this driver, and the driver can be independently switched at build time between using DMA engine and the private DMA API. Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* mtd: nand: omap: add support for hardware BCH eccIvan Djelic2012-05-141-0/+245
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Two modes are supported: 4-bit and 8-bit error correction. Note that 4-bit mode is only confirmed to work on OMAP3630 ES 1.x, x >= 1. The OMAP3 GPMC hardware BCH engine computes remainder polynomials, it does not provide automatic error location and correction: this step is implemented using the BCH library. This implementation only protects page data, there is no support for protecting user-defined spare area bytes (this could be added with few modifications); therefore, it cannot be used with YAFFS2 or other similar filesystems that depend on oob storage. Before being stored to nand flash, hardware BCH ecc is adjusted so that an erased page has a valid ecc; thus allowing correction of bitflips in blank pages (also common on 4-bit devices). BCH correction mode is selected at runtime by setting platform data parameter 'ecc_opt' to value OMAP_ECC_BCH4_CODE_HW or OMAP_ECC_BCH8_CODE_HW. This code has been tested with mtd test modules, UBI and UBIFS on a BeagleBoard revC3 (OMAP3530 ES3.0 + Micron NAND 256MiB 1,8V 16-bit). Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: omap: fix race condition in omap_wait()Ivan Djelic2012-05-141-1/+3
| | | | | | | | | | | | | | | If a context switch occurs in function omap_wait() just before the while loop is entered, then upon return from context switch the timeout may already have elapsed: in that case, status is never read from NAND device, and omap_wait() returns an error. This failure has been experimentally observed during stress tests. This patch ensures a NAND status read is always performed before returning, as in the generic nand_wait() function. Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: omap2: fix resource leak in prefetch-busy pathGrazvydas Ignotas2012-05-141-1/+3
| | | | | | | | | If prefetch engine is busy, current code "forgets" to call dma_unmap_single(), which results in a deadlock later, so add it. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: flash drivers set ecc strengthMike Dunn2012-03-271-0/+1
| | | | | | | | | | | | | | | | | Flash device drivers initialize 'ecc_strength' in struct mtd_info, which is the maximum number of bit errors that can be corrected in one writesize region. Drivers using the nand interface intitialize 'strength' in struct nand_ecc_ctrl, which is the maximum number of bit errors that can be corrected in one ecc step. Nand infrastructure code translates this to 'ecc_strength'. Also for nand drivers, the nand infrastructure code sets ecc.strength for ecc modes NAND_ECC_SOFT, NAND_ECC_SOFT_BCH, and NAND_ECC_NONE. It is set in the driver for all other modes. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: do not use plain 0 as NULLArtem Bityutskiy2012-03-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | The first 3 arguments of 'mtd_device_parse_register()' are pointers, but many callers pass '0' instead of 'NULL'. Fix this globally. Thanks to coccinelle for making it easy to do with the following semantic patch: @@ expression mtd, types, parser_data, parts, nr_parts; @@ ( -mtd_device_parse_register(mtd, 0, parser_data, parts, nr_parts) +mtd_device_parse_register(mtd, NULL, parser_data, parts, nr_parts) | -mtd_device_parse_register(mtd, types, 0, parts, nr_parts) +mtd_device_parse_register(mtd, types, NULL, parts, nr_parts) | -mtd_device_parse_register(mtd, types, parser_data, 0, nr_parts) +mtd_device_parse_register(mtd, types, parser_data, NULL, nr_parts) ) Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: convert drivers/mtd/* to use module_platform_driver()Axel Lin2012-01-091-14/+1
| | | | | | | | | | | | This patch converts the drivers in drivers/mtd/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2011-11-071-15/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
| * mtd: cleanup style on pr_debug messagesBrian Norris2011-09-111-2/+2
| | | | | | | | | | Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
| * mtd: replace DEBUG() with pr_debug()Brian Norris2011-09-111-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Start moving away from the MTD_DEBUG_LEVEL messages. The dynamic debugging feature is a generic kernel feature that provides more flexibility. (See Documentation/dynamic-debug-howto.txt) Also fix some punctuation, indentation, and capitalization that went along with the affected lines. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
| * mtd: omap2.c: use mtd_device_parse_registerDmitry Eremin-Solenikov2011-09-111-8/+2
| | | | | | | | | | | | | | | | | | Replace custom invocations of parse_mtd_partitions and mtd_device_register with common mtd_device_parse_register call. This would bring: standard handling of all errors, fallback to default partitions, etc. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
| * mtd: omap2 don't specify default parsing optionsDmitry Eremin-Solenikov2011-09-111-3/+1
| | | | | | | | | | | | | | | | | | Since 'cmdline, NULL' is now a default for parse_mtd_partitions, don't specify this in every driver, instead pass NULL to force parse_mtd_partitions to use default. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* | mtd: Add module.h to drivers users that were implicitly using it.Paul Gortmaker2011-11-011-0/+1
|/ | | | | | | | We are cleaning up the implicit presence of module.h that these drivers are taking advantage of. Fix them in advance of the cleanup operation. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* mtd: omap2: convert to mtd_device_register()Jamie Iles2011-05-251-7/+3
| | | | | | | | | Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: omap: fix subpage ecc issue with prefetchKishore Kadiyala2011-05-251-7/+5
| | | | | | | | | | | | | | | | | | | | | | When reading/writing a subpage (When HW ECC is not available/enabled) for number of bytes not aligned to 4, the mis-aligned bytes are handled first (by cpu copy method) before enabling the Prefetch engine to/from 'p'(start of buffer 'buf'). Then it reads/writes rest of the bytes with the help of Prefetch engine, if available, or again using cpu copy method. Currently, reading/writing of rest of bytes, is not done correctly since its trying to read/write again to/from begining of buffer 'buf', overwriting the mis-aligned bytes. Read & write using prefetch engine got broken in commit '2c01946c'. We never hit a scenario of not getting 'gpmc_prefetch_enable' call success. So, problem did not get caught up. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Vimal Singh <vimal.newwork@gmail.com> Reported-by: Bryan DE FARIA <bdefaria@adeneo-embedded.com> Cc: stable@kernel.org [2.6.35+] Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: omap2: mtd split nand_scan in ident and tailJan Weitzel2011-05-251-2/+8
| | | | | | | | | | | | | | | | nand_scan calls nand_scan_tail and here we got a ecc.layout and calculate oobavail for this layout. After calling nand_scan, we change the layout pointer if OMAP_ECC_HAMMING_CODE_HW_ROMCODE is set. This results in not calcluated oobavail. Mountig as jffs2 is not possible. To fix that nand_scan has to split up in nand_scan_ident and nand_scan_tail setting ecc.layout between these calls. So nand_scan_tail calculates oobvail for the used layout. This is also done in serveral other platforms. Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Reviewed-by: Vimal Singh <vimal.newwork@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge branch 'master' of ↵Artem Bityutskiy2011-03-251-88/+279
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus-1 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits) [media] rc: update for bitop name changes fs: simplify iget & friends fs: pull inode->i_lock up out of writeback_single_inode fs: rename inode_lock to inode_hash_lock fs: move i_wb_list out from under inode_lock fs: move i_sb_list out from under inode_lock fs: remove inode_lock from iput_final and prune_icache fs: Lock the inode LRU list separately fs: factor inode disposal fs: protect inode->i_state with inode->i_lock lib, arch: add filter argument to show_mem and fix private implementations SLUB: Write to per cpu data when allocating it slub: Fix debugobjects with lockless fastpath autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd() autofs4 - remove autofs4_lock autofs4 - fix d_manage() return on rcu-walk autofs4 - fix autofs4_expire_indirect() traversal autofs4 - fix dentry leak in autofs4_expire_direct() autofs4 - reinstate last used update on access vfs - check non-mountpoint dentry might block in __follow_mount_rcu() ... NOTE! This merge commit was created to fix compilation error. The block tree was merged upstream and removed the 'elv_queue_empty()' function which the new 'mtdswap' driver is using. So a simple merge of the mtd tree with upstream does not compile. And the mtd tree has already be published, so re-basing it is not an option. To fix this unfortunate situation, I had to merge upstream into the mtd-2.6.git tree without committing, put the fixup patch on top of this, and then commit this. The result is that we do not have commits which do not compile. In other words, this merge commit "merges" 3 things: the MTD tree, the upstream tree, and the fixup patch.
| * Merge branch 'omap-for-linus' of ↵Linus Torvalds2011-03-181-88/+279
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
| | * omap3: nand: making ecc layout as compatible with romcode eccSukumar Ghorai2011-02-181-1/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch overrides nand ecc layout and bad block descriptor (for 8-bit device) to support hw ecc in romcode layout. So as to have in sync with ecc layout throughout; i.e. x-loader, u-boot and kernel. This enables to flash x-loader, u-boot, kernel, FS images from kernel itself and compatiable with other tools. This patch does not enables this feature by default and need to pass from board file to enable for any board. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * omap3: nand: ecc layout select from board fileSukumar Ghorai2011-02-181-15/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes it possible to select sw or hw (different layout options) ecc scheme supported by omap nand driver. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>