summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/parsers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* mtd: parsers: ofpart: support Linksys Northstar partitionsRafał Miłecki2021-03-285-0/+85
| | | | | | | | | This allows extending ofpart parser with support for Linksys Northstar devices. That support uses recently added quirks mechanism. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210312134919.7767-2-zajec5@gmail.com
* mtd: parsers: ofpart: make symbol 'bcm4908_partitions_quirks' staticWei Yongjun2021-03-111-1/+1
| | | | | | | | | | | | | | | | The sparse tool complains as follows: drivers/mtd/parsers/ofpart_core.c:25:32: warning: symbol 'bcm4908_partitions_quirks' was not declared. Should it be static? This symbol is not used outside of ofpart_core.c, so this commit marks it static. Fixes: 457da931b608 ("mtd: parsers: ofpart: support BCM4908 fixed partitions") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210304064600.3279138-1-weiyongjun1@huawei.com
* mtd: parsers: qcom: incompatible with spi-nor 4k sectorsBaruch Siach2021-03-111-0/+7
| | | | | | | | | | | | Partition size and offset value are in block size units, which is the same as 'erasesize'. But when 4K sectors are enabled erasesize is set to 4K. Bail out in that case. Fixes: 803eb124e1a64 ("mtd: parsers: Add Qcom SMEM parser") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/0a2611f885b894274436ded3ca78bc0440fca74a.1614790096.git.baruch@tkos.co.il
* mtd: parsers: qcom: Fix error conditionMiquel Raynal2021-03-111-1/+1
| | | | | | | | | | | | | | | | | qcom_smem_get() does not return NULL, and even if it did, the NULL condition is usually not an error but a success condition and should not trigger an error trace. Let's replace IS_ERR_OR_NULL() by IS_ERR(). This fixes the following smatch warning: drivers/mtd/parsers/qcomsmempart.c:109 parse_qcomsmem_part() warn: passing zero to 'PTR_ERR' Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 803eb124e1a6 ("mtd: parsers: Add Qcom SMEM parser") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210303084634.12796-1-miquel.raynal@bootlin.com
* mtd: parsers: ofpart: limit parsing of deprecated DT syntaxRafał Miłecki2021-03-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For backward compatibility ofpart still supports the old syntax like: spi-flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; partition@0 { label = "bootloader"; reg = <0x0 0x100000>; }; }; (without "partitions" subnode). There is no reason however to support nested partitions without a clear "compatible" string like: partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "bootloader"; reg = <0x0 0x100000>; partition@0 { label = "config"; reg = <0x80000 0x80000>; }; }; }; (we never officially supported or documented that). Make sure ofpart doesn't attempt to parse above. Cc: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210302190012.1255-1-zajec5@gmail.com
* mtd: parsers: ofpart: support BCM4908 fixed partitionsRafał Miłecki2021-03-115-2/+116
| | | | | | | | | | | | | | | | | | Some devices use fixed partitioning with some partitions requiring some extra logic. E.g. BCM4908 may have multiple firmware partitions but detecting currently used one requires checking bootloader parameters. To support such cases without duplicating a lot of code (without copying most of the ofpart.c code) support for post-parsing callback was added. BCM4908 support in ofpart can be enabled using config option and results in compiling & executing a specific callback. It simply reads offset of currently used firmware partition from the DT. Bootloader specifies it using the "brcm_blparms" property. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210301105823.31032-1-zajec5@gmail.com
* mtd: parsers: extend Qcom SMEM parser to SPI flashBaruch Siach2021-03-111-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Qcom MIBIB partition might be stored on SPI flash devices, and the parser works in this case just as well: [ 1.404229] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64 [ 1.408078] spi-nor spi0.0: found mx25u6435f, expected n25q128a11 [ 1.415016] spi-nor spi0.0: mx25u6435f (8192 Kbytes) [ 1.420756] 12 qcomsmem partitions found on MTD device spi0.0 [ 1.425739] Creating 12 MTD partitions on "spi0.0": [ 1.431381] 0x000000000000-0x00000000c000 : "0:sbl1" [ 1.437058] 0x00000000c000-0x00000000d000 : "0:mibib" [ 1.442143] 0x00000000d000-0x000000027000 : "0:qsee" [ 1.447057] 0x000000027000-0x000000028000 : "0:devcfg" [ 1.452088] 0x000000028000-0x00000002a000 : "0:rpm" [ 1.457065] 0x00000002a000-0x00000002b000 : "0:cdt" [ 1.461832] 0x00000002b000-0x00000002c000 : "0:appsblenv" [ 1.466736] 0x00000002c000-0x000000036000 : "0:appsbl" [ 1.472248] 0x000000036000-0x00000003a000 : "0:art" [ 1.477297] 0x00000003a000-0x00000003e000 : "config" [ 1.482047] 0x00000003e000-0x00000004e000 : "data" [ 1.487257] 0x00000004e000-0x000000200000 : "0:hlos" Remove dependency on MTD_NAND_QCOM. Update the Kconfig prompt and help text accordingly. Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/7f558e888a41c5b1fd4ca0427b3976531c51a876.1614080824.git.baruch@tkos.co.il
* Merge tag 'nand/for-5.12' of ↵Richard Weinberger2021-02-103-0/+179
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next Raw NAND controller drivers: * Intel: Fix an error handling path in 'ebu_dma_start()' * Tango: Remove the driver * Marvell: Convert comma to semicolon * MXC: Convert comma to semicolon * Qcom: Add support for Qcom SMEM parser Related MTD changes: * parsers: Add Qcom SMEM parser
| * mtd: parsers: Add Qcom SMEM parserManivannan Sadhasivam2021-01-043-0/+179
| | | | | | | | | | | | | | | | | | | | NAND based Qualcomm platforms have the partition table populated in the Shared Memory (SMEM). Hence, add a parser for parsing the partitions from it. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210104041137.113075-3-manivannan.sadhasivam@linaro.org
* | mtd: parsers: afs: Fix freeing the part name memory in failureManivannan Sadhasivam2021-02-011-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case of failure while parsing the partitions, the iterator should be pre decremented by one before starting to free the memory allocated by kstrdup(). Because in the failure case, kstrdup() will not succeed and thus no memory will be allocated for the current iteration. Fixes: 1fca1f6abb38 ("mtd: afs: simplify partition parsing") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210104041137.113075-5-manivannan.sadhasivam@linaro.org
* | mtd: parser: imagetag: fix error codes in bcm963xx_parse_imagetag_partitions()Dan Carpenter2021-01-281-0/+4
|/ | | | | | | | | | If the kstrtouint() calls fail, then this should return a negative error code but it currently returns success. Fixes: dd84cb022b31 ("mtd: bcm63xxpart: move imagetag parsing to its own parser") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/YBKFtNaFHGYBj+u4@mwanda
* mtd: parser: cmdline: Fix parsing of part-names with colonsSven Eckelmann2020-12-071-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Some devices (especially QCA ones) are already using hardcoded partition names with colons in it. The OpenMesh A62 for example provides following mtd relevant information via cmdline: root=31:11 mtdparts=spi0.0:256k(0:SBL1),128k(0:MIBIB),384k(0:QSEE),64k(0:CDT),64k(0:DDRPARAMS),64k(0:APPSBLENV),512k(0:APPSBL),64k(0:ART),64k(custom),64k(0:KEYS),0x002b0000(kernel),0x00c80000(rootfs),15552k(inactive) rootfsname=rootfs rootwait The change to split only on the last colon between mtd-id and partitions will cause newpart to see following string for the first partition: KEYS),0x002b0000(kernel),0x00c80000(rootfs),15552k(inactive) Such a partition list cannot be parsed and thus the device fails to boot. Avoid this behavior by making sure that the start of the first part-name ("(") will also be the last byte the mtd-id split algorithm is using for its colon search. Fixes: eb13fa022741 ("mtd: parser: cmdline: Support MTD names containing one or more colons") Cc: stable@vger.kernel.org Cc: Ron Minnich <rminnich@google.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201124062506.185392-1-sven@narfation.org
* mtd: parsers: bcm63xx: Do not make it modularFlorian Fainelli2020-10-021-1/+1
| | | | | | | | | | | | | | | | With commit 91e81150d388 ("mtd: parsers: bcm63xx: simplify CFE detection"), we generate a reference to fw_arg3 which is the fourth firmware/command line argument on MIPS platforms. That symbol is not exported and would cause a linking failure. The parser is typically necessary to boot a BCM63xx-based system anyway so having it be part of the kernel image makes sense, therefore make it 'bool' instead of 'tristate'. Fixes: 91e81150d388 ("mtd: parsers: bcm63xx: simplify CFE detection") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929172726.30469-1-f.fainelli@gmail.com
* Merge tag 'mtd/for-5.9' of ↵Linus Torvalds2020-08-091-20/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "MTD core changes: - Spelling - http to https updates NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4, TC58NVG0S3E, and TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC SPI NOR core changes: - Disable Quad Mode in spi_nor_restore(). - Don't abort BFPT parsing when QER reserved value is used. - Add support/update capabilities for few flashes. - Drop s70fl01gs flash: it does not support RDSR(05h) which is critical for erase/write. - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during the release cycle. SPI NOR controller drivers changes: - Move the cadence-quadspi driver to spi-mem. The series was taken through the SPI tree. Merge it also in spi-nor/next to avoid conflicts during the release cycle. - intel-spi: - Add new PCI IDs. - Ignore the Write Disable command, the controller doesn't support it. - Fix performance regression" * tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits) MTD: pfow.h: drop a duplicated word MTD: mtd-abi.h: drop a duplicated word mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones mtd: Replace HTTP links with HTTPS ones mtd: hyperbus: Replace HTTP links with HTTPS ones mtd: revert "spi-nor: intel: provide a range for poll_timout" mtd: spi-nor: update read capabilities for w25q64 and s25fl064k mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g mtd: spi-nor: macronix: Add support for mx66u2g45g mtd: spi-nor: intel-spi: Simulate WRDI command mtd: spi-nor: Disable the flash quad mode in spi_nor_restore() mtd: spi-nor: Add capability to disable flash quad mode mtd: spi-nor: spansion: Remove s70fl01gs from flash_info mtd: spi-nor: sfdp: do not make invalid quad enable fatal dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags mtd: rawnand: stm32_fmc2: get resources from parent node mtd: rawnand: stm32_fmc2: use regmap APIs memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation dt-bindings: mtd: update STM32 FMC2 NAND controller documentation ...
| * mtd: parsers: bcm63xx: simplify CFE detectionÁlvaro Fernández Rojas2020-06-261-20/+12
| | | | | | | | | | | | | | | | | | | | | | Instead of trying to parse CFE version string, which is customized by some vendors, let's just check that "CFE1" was passed on argument 3. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200615091740.2958303-1-noltari@gmail.com
* | treewide: Remove uninitialized_var() usageKees Cook2020-07-161-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
* mtd: parser: cmdline: Support MTD names containing one or more colonsBoris Brezillon2020-06-051-3/+20
| | | | | | | | | | | | Looks like some drivers define MTD names with a colon in it, thus making mtdpart= parsing impossible. Let's fix the parser to gracefully handle that case: the last ':' in a partition definition sequence is considered instead of the first one. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Ron Minnich <rminnich@google.com> Tested-by: Ron Minnich <rminnich@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: cmdlinepart: Add an slc option to use SLC mode on a partBoris Brezillon2020-05-111-2/+10
| | | | | | | | Add a new option to set the MTD_SLC_ON_MLC_EMULATION flag. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200503155341.16712-8-miquel.raynal@bootlin.com
* mtd: partitions: ofpart: Parse the slc-mode propertyBoris Brezillon2020-05-111-0/+3
| | | | | | | | | Parse the slc-mode property and set the MTD_MLC_IN_SLC_MODE flag when present. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200503155341.16712-7-miquel.raynal@bootlin.com
* mtd: sharpslpart: Fix unsigned comparison to zeroYueHaibing2020-01-211-2/+2
| | | | | | | | | | | | | The unsigned variable log_num is being assigned a return value from the call to sharpsl_nand_get_logical_num that can return -EINVAL. Detected using Coccinelle: ./drivers/mtd/parsers/sharpslpart.c:207:6-13: WARNING: Unsigned expression compared with zero: log_num > 0 Fixes: 8a4580e4d298 ("mtd: sharpslpart: Add sharpslpart partition parser") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: parsers: Move CMDLINE parserLinus Walleij2019-09-153-0/+438
| | | | | | | | This moves the CMDLINE partition parser down into the parser subdirectory. No functional change. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: parsers: Move OF parserLinus Walleij2019-09-153-0/+247
| | | | | | | | This moves the OF/device tree partition parser down into the parser subdirectory. No functional change. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: parsers: Move BCM63xx parserLinus Walleij2019-09-153-0/+190
| | | | | | | | This moves the BCM63xx partition parser down into the parser subdirectory. No functional change. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: parsers: Move BCM47xx parserLinus Walleij2019-09-153-0/+325
| | | | | | | | This moves the BCM47xx partition parser down into the parser subdirectory. No functional change. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: parsers: Move TI AR7 parserLinus Walleij2019-09-153-0/+135
| | | | | | | | This moves the TI AR7 partition parser down into the parser subdirectory. No functional change. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* Merge tag 'mtd/for-5.3' of ↵Linus Torvalds2019-07-141-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...
| * mtd: afs: remove unneeded NULL checkDing Xiang2019-07-071-2/+1
| | | | | | | | | | | | | | NULL check before kfree is unneeded, so remove it. Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2019-06-191-5/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner2019-05-301-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-301-6/+1
| | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102Thomas Gleixner2019-05-241-15/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 50 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-212-0/+2
| | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mtd: afs: add v2 partition parsingLinus Walleij2019-05-061-1/+157
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AFS v2 partition type appear in later ARM reference designs such as RealView, Versatile Express and the 64bit Juno Development Platform. The image informations is padded with a 32bit word (4 bytes) on the 32bit platforms and a 64bit word (8 bytes) on the 64bit platforms. The boot monitor source code gives at hand that this is because the first entry in the struct mapped over the image information is a "next" pointer for a linked list, filled in by firmware after reading in the info block, and always zero in the flash. We adjust padding by checking what padding gives the right checksum. This was tested on: - Integrator/AP (v1 partitions) - RealView PB11MPCore (v2 32bit partitions) - Juno Development System (v2 64bit partitions) All systems display the images in flash very nicely as separate partitions, e.g on Juno: 4 afs partitions found on MTD device 8000000.flash Creating 4 MTD partitions on "8000000.flash": 0x000000040000-0x0000000c0000 : "fip" 0x000000ec0000-0x0000018c0000 : "Image" 0x000000f00000-0x000000f40000 : "juno" 0x000003ec0000-0x000003f00000 : "bl1" Cc: Ryan Harkin <ryan.harkin@linaro.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: afs: factor the IIS read into partition parserLinus Walleij2019-05-061-39/+20
| | | | | | | | | | | Factor the IIS (Image Information Structure) reading into the partition parser, giving us a single, clean partition parser function. Cc: Ryan Harkin <ryan.harkin@linaro.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: afs: factor footer parsing into the v1 part parsingLinus Walleij2019-05-061-59/+39
| | | | | | | | | | This simplifies the code by factoring in the image footer parsing into the single function parsing the AFSv1 partitions. Cc: Ryan Harkin <ryan.harkin@linaro.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: factor out v1 partition parsingLinus Walleij2019-05-061-38/+50
| | | | | | | | | | This breaks out the parsing of v1 partitions so we can later add a v2 partition parser. Cc: Ryan Harkin <ryan.harkin@linaro.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: afs: simplify partition detectionLinus Walleij2019-05-061-11/+22
| | | | | | | | | | | | Instead of reading out the AFS footers twice, create a separate function to just check if there is a footer or not. Rids a few local variables and prepare us to join the actual parser into one function. Cc: Ryan Harkin <ryan.harkin@linaro.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: afs: simplify partition parsingLinus Walleij2019-05-061-35/+32
| | | | | | | | | | | | | | | | | | | | | | This simplifies the AFS partition parsing to make the code more straight-forward and readable. Before this patch the code tried to calculate the memory required to hold the partition info by adding up the sizes of the strings of the names and adding that to a single memory allocation, indexing the name pointers in front of the struct mtd_partition allocations so all allocated data was in one chunk. This is overzealous. Instead use kstrdup and bail out, kfree():ing the memory used for MTD partitions and names alike on the errorpath. In the process rename the index variable from idx to i. Cc: Ryan Harkin <ryan.harkin@linaro.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: partitions: Add OF support to AFS partitionsLinus Walleij2019-05-061-0/+7
| | | | | | | This adds device tree support for AFS partitioning. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: afs: Move AFS partition parser to parsers subdirLinus Walleij2019-05-063-0/+283
| | | | | | | | This moves the AFS (ARM Firmware Suite) partition parser for NOR flash down into the parsers subdirectory. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: parser_imagetag: add of_match_table supportJonas Gorski2019-05-061-0/+8
| | | | | | | | | | Allow matching the imagetag parser for fixed partitions defined in the device tree. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: bcm63xxpart: move imagetag parsing to its own parserJonas Gorski2019-05-063-0/+226
| | | | | | | | | | | | | Move the bcm963xx Image Tag parsing into its own partition parser. This Allows reusing the parser with different full flash parsers. While moving it, rename it to bcm963* to better reflect it isn't chip, but reference implementation specific. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: partitions: Add OF support to RedBoot partitionsLinus Walleij2018-11-121-1/+31
| | | | | | | | | This adds device tree support for RedBoot partitioning. We read out the FIS directory block information from the device tree and then parse the partition table from there. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: Move Redboot partition parserLinus Walleij2018-11-123-0/+353
| | | | | | | | This moves the Redboot partition parser down to the parsers subdirectory. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: parsers: trx: add of_match_table with the new DT bindingRafał Miłecki2018-07-071-0/+7
| | | | | | | | | This allows using TRX parser to find TRX partitions on flash device described in DT using a proper binding. It's useful for devices storing firmware on a separated flash and having rootfs partition in it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* treewide: kzalloc() -> kcalloc()Kees Cook2018-06-132-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* mtd: sharpslpart: make local function sharpsl_nand_cleanup_ftl() staticWei Yongjun2018-01-061-1/+1
| | | | | | | | | | | Fixes the following sparse warnings: drivers/mtd/parsers/sharpslpart.c:222:6: warning: symbol 'sharpsl_nand_cleanup_ftl' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* mtd: sharpslpart: fix overflow on block_adr calculationColin Ian King2017-12-181-2/+2
| | | | | | | | | | | | | Multiplying block_num and mtd->erasesize may potentially overflow as they are both unsigned ints and so the multiplication is evaluated in unsigned int arithmetic. Cast block_adr to off_t to ensure multiplication is off_t sized to avoid any potential overflow. Detected by CoverityScan, CID#1461264 ("Unintentional integer overflow") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* mtd: sharpslpart: Add sharpslpart partition parserAndrea Adami2017-11-133-0/+407
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Sharp SL Series (Zaurus) PXA handhelds have 16/64/128M of NAND flash and share the same layout of the first 7M partition, managed by Sharp FTL. GPL 2.4 sources: http://support.ezaurus.com/developer/source/source_dl.asp The purpose of this self-contained patch is to add a common parser and remove the hardcoded sizes in the board files (these devices are not yet converted to devicetree). Users will have benefits because the mtdparts= tag will not be necessary anymore and they will be free to repartition the little sized flash. The obsolete bootloader can not pass the partitioning info to modern kernels anymore so it has to be read from flash at known logical addresses. (see http://www.h5.dion.ne.jp/~rimemoon/zaurus/memo_006.htm ) In kernel, under arch/arm/mach-pxa we have already 8 machines: MACH_POODLE, MACH_CORGI, MACH_SHEPERD, MACH_HUSKY, MACH_AKITA, MACH_SPITZ, MACH_BORZOI, MACH_TOSA. Lost after the 2.4 vendor kernel are MACH_BOXER and MACH_TERRIER. Almost every model has different factory partitioning: add to this the units can be repartitioned by users with userspace tools (nandlogical) and installers for popular (back then) linux distributions. The Parameter Area in the first (boot) partition extends from 0x00040000 to 0x0007bfff (176k) and contains two copies of the partition table: ... 0x00060000: Partition Info1 16k 0x00064000: Partition Info2 16k 0x00668000: Model 16k ... The first 7M partition is managed by the Sharp FTL reserving 5% + 1 blocks for wear-leveling: some blocks are remapped and one layer of translation (logical to physical) is necessary. There isn't much documentation about this FTL in the 2.4 sources, just the MTD methods for reading and writing using logical addresses and the block management (wear-leveling, use counter). It seems this FTL was tailored with 16KiB eraesize in mind so to fit one param block exactly, to have two copies of the partition table on two blocks. Later pxa27x devices have same size but 128KiB erasesize and less blocks (56 vs. 448) but the same schema was adopted, even if the two tables are now in the same eraseblock. For the purpose of the MTD parser only the read part of the code was taken. The NAND drivers that can use this parser are sharpsl.c and tmio_nand.c. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: parsers: trx: fix pr_err format for printing offsetRafał Miłecki2017-06-231-1/+1
| | | | | | | | This fixes following warning: include/linux/kern_levels.h:4:18: warning: format '%X' expects argument of type 'unsigned int', but argument 2 has type 'size_t {aka long unsigned int}' [-Wformat=] Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 04:13:48 +0100