summaryrefslogtreecommitdiffstats
path: root/drivers/mtd (follow)
Commit message (Collapse)AuthorAgeFilesLines
* mtd: gpmi: add sanity check for the ECCHuang Shijie2013-02-042-2/+30
| | | | | | | | | | | | | We do the check based on the following two facts: [1] The mx23/mx28 can only support 20-bits ECC, while the mx6 can supports 40-bits ECC. [2] The mx23/mx28 can only support the GF13, while the mx6 can supports GF13 and GF14. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: gpmi: set the Golois Field bit for mx6q's BCHHuang Shijie2013-02-043-2/+28
| | | | | | | | | | | | | | | | The GF13 can be only used in the following case: The ECC data chunk is less then 1K bytes. In mx23/mx28, the ecc data chunk is 512 bytes. So it is okay. But in mx6q, we begin to use some large nand chip whose ecc data chunk maybe 1K bytes long. So when the data chunk is 1K bytes, we have to use the GF14. This patch sets the Golois Field bit when the GF14 is needed. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: devices: elm: Removes <xx> literals in elm DT nodePhilip Avinash2013-02-041-1/+1
| | | | | | | | | As part of removing generalized dependency, replace <xx> literal fields in DT compatible field with <52> for am335x platforms. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: gpmi: fix a dereferencing freed memory errorHuang Shijie2013-02-041-1/+1
| | | | | | | | | | The patch "490e280 mtd: gpmi-nand: Convert to module_platform_driver()" introduced a "dereferencing freed memory" error. This patch fixes it. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: fix the wrong timeo for panic_nand_wait()Huang Shijie2013-02-041-6/+2
| | | | | | | | | | | | | | The panic_nand_wait() expects the timeo in ms and not in jiffies. But in nand_wait(), the timeo for panic_nand_wait() is assigned with wrong value(jiffies + some delay). The timeo should be set like the panic_nand_write() does. This patch passes timeo in ms to panic_nand_wait(). And this patch also passes timeo in jiffies(converted by msecs_to_jiffies) to time_before() which makes the code more readable. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) lockingStefan Roese2013-02-042-0/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently cfi_cmdset_0002.c does not support PPB locking of sectors. This patch adds support for this locking/unlocking mechanism. It is needed on some platforms, since newer U-Boot versions do support this PPB locking and protect for example their environment sector(s) this way. This PPB locking/unlocking will be enabled for all devices supported by cfi_cmdset_0002 reporting 8 in the CFI word 0x49 (Sector Protect/Unprotect scheme). Please note that PPB locking does support sector-by-sector locking. But the whole chip can only be unlocked together. So unlocking one sector will automatically unlock all sectors of this device. Because of this chip limitation, the PPB unlocking function saves the current locking status of all sectors before unlocking the whole device. After unlocking the saved locking status is re-configured. This way only the addressed sectors will be unlocked. To selectively enable this advanced sector protection mechanism, the device-tree property "use-advanced-sector-protection" has been created. To enable support for this locking this property needs to be present in the flash DT node. E.g.: nor_flash@0,0 { compatible = "amd,s29gl256n", "cfi-flash"; bank-width = <2>; use-advanced-sector-protection; ... Tested with Spansion S29GL512S10THI and Micron JS28F512M29EWx flash devices. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: Allow removal of partitioning modulesLubomir Rintel2013-02-043-0/+19
| | | | | Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: cmdlinepart: Make it into a moduleLubomir Rintel2013-02-042-3/+9
| | | | | | | All other partitioning schemes can be compiled as modules Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: gpmi: dump the BCH registersHuang Shijie2013-02-042-0/+7
| | | | | | | Dump the BCH registers in gpmi_dump_info(). Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: nane: print source of error messageTormod Volden2013-02-041-3/+2
| | | | | | | | | | | | | | | | Add the function name to the error message. These messages are not very helpful: [183356.176682] uncorrectable error : [183356.180273] uncorrectable error : [183356.184194] uncorrectable error : [183356.187773] uncorrectable error : [183356.191280] uncorrectable error : Artem: amended the patch a bit Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
* mtd: fsl_ifc_nand: use more portable i/o accessorsKim Phillips2013-02-041-114/+119
| | | | | | | | | | | | | | | | | in/out_be32 accessors are Power arch centric whereas ioread/writebe32 are available in other arches. Since the IFC device registers are annotated big endian in fsl_ifc.h, the accessor annotations now match, resulting in the pleasant side-effect of this patch silencing sparse endian warnings such as the following: drivers/mtd/nand/fsl_ifc_nand.c:179:19: warning: incorrect type in argument 1 (different base types) drivers/mtd/nand/fsl_ifc_nand.c:179:19: expected unsigned int volatile [noderef] [usertype] <asn:2>*addr drivers/mtd/nand/fsl_ifc_nand.c:179:19: got restricted __be32 [noderef] <asn:2>*<noident> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: uclinux: add a comment about why uclinux_ram_map must not be staticUwe Kleine-König2013-02-041-0/+6
| | | | | | | | | | | I was (at least) the second person trying to fix a warning by sparse, so document in the code why this is a bad idea and add an extern declaration to make sparse happy. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: uclinux: support ROM and allow passing the base addressUwe Kleine-König2013-02-042-6/+20
| | | | | | | | | | | | | This allows to put the filesystem at a defined address in ROM allowing to save more precious RAM. I think it's safe to default to ROM because the intention of using the uclinux map is to use a romfs and so mtd-ram doesn't give you anything that mtd-rom doesn't. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: bcm47xxsflash: add own struct for abstrating bus typeRafał Miłecki2013-02-042-13/+39
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: bcm47xxpart: register extra "firmware" partitionRafał Miłecki2013-02-041-0/+11
| | | | | | | It's required for accessing trx header (usually re-calculating a checksum) and for writing a new firmware. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: bcm47xxpart: simplify size calculation to one loopRafał Miłecki2013-02-041-5/+6
| | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
* mtd: chips: Add support for GigaDevice GD25Q32/GD25Q64 SPI Flash in m25p80.cMichel Stempin2013-02-041-0/+4
| | | | | | | | | | Add support for GigaDevice GD25Q32 32 Mbit (4 MB) SPI Flash (see datasheet: http://www.gigadevice.com/UserFiles/GD25Q32_Rev0.2(1).pdf) used in Hame MPR-A1 and clones, and for GigaDevice GD25Q64 64 Mbit (8 MB) SPI Flash used in Hame MPR-A2 devices (datasheet: http://www.gigadevice.com/UserFiles/GD25Q64.pdf). Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: nand: omap2: Support for hardware BCH error correction.Philip Avinash2013-02-041-39/+534
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELM module can be used for hardware error correction of BCH 4 & 8 bit. ELM module functionality is verified by checking the availability of handle for ELM module in device tree. Hence supporting 1. ELM module available, BCH error correction done by ELM module. Also support read & write page in one shot by adding custom read_page and write_page methods. This helps in optimizing code for NAND flashes with page size less than 4 KB. 2. If ELM module not available fall back to software BCH error correction support. New structure member is added to omap_nand_info 1. "is_elm_used" to know the status of whether the ELM module is used for error correction or not. 2. "elm_dev" device pointer to elm device on detection of ELM module. Also being here update the device tree documentation of gpmc-nand for adding optional property elm_id. Note: ECC layout uses 1 extra bytes for 512 byte of data to handle erased pages. Extra byte programmed to zero for programmed pages. Also BCH8 requires 14 byte ecc to maintain compatibility with RBL ECC layout. This results a common ecc layout across RBL, U-boot & Linux with BCH8. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: devices: elm: Add support for ELM error correctionPhilip Avinash2013-02-042-1/+407
| | | | | | | | | The ELM hardware module can be used to speedup BCH 4/8/16 ECC scheme error correction. For now only 4 & 8 bit support is added Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: nand: omap2: Update nerrors using ecc.strengthPhilip Avinash2013-02-041-4/+8
| | | | | | | | | | Remove check of ecc bytes with 13, number of errors can directly update from nand ecc strength. This will increase re-usability of the code. Also add macro definitions BCH8_ERROR_MAX & BCH4_ERROR_MAX for better readability and cleaner code. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: mxc_nand: compress ID info for send_read_id_v3Roman Schneider2013-02-041-0/+11
| | | | | | | | Also compress the id in case of a v3 NAND flash controller (i.mx51, i.mx53) and 16Bit buswidth. Signed-off-by: Roman Schneider <schneider@at.festo.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: m25p80: Flash protection support for STmicro chipsAustin Boyle2013-02-041-0/+96
| | | | | | | | | | | This patch adds generic support for flash protection on STmicro chips. On chips with less than 3 protection bits, the unused bits are don't cares and so can be written anyway. The lock function will only change the protection bits if it would not unlock other areas. Similarly, the unlock function will not lock currently unlocked areas. Tested on the m25p64. Signed-off-by: Austin Boyle <Austin.Boyle@aviatnet.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: rename random32() to prandom_u32()Akinobu Mita2013-02-044-15/+15
| | | | | | | | Use more preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: cmdlinepart: update /proc/mtd commentChristopher Cordahi2013-02-041-1/+1
| | | | | | | | | | /proc/mtd doesn't contain the mtd-id of the device, but the part name from the command line. This corrects what I believe is an obsolete comment from commit a0ee24a03b1c06813c814b9f70946c8984752f01. Signed-off-by: Christopher Cordahi <christophercordahi@nanometrics.ca> Cc: Philip Rakity <prakity@yahoo.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: cmdlinepart: describe mtd orderingChristopher Cordahi2013-02-041-1/+12
| | | | | | | | | | | | | | The mtd documentation makes no mention of the useful feature whereby partitions' logical ordering need not match their physical ordering. Truncation of parts, skipping of zero sized parts, and handling of overlapping parts are similarly not mentioned. This updates the comments at the top of file describing the command line parsing as currently implemented. I proposed this in http://lists.infradead.org/pipermail/linux-mtd/2012-December/045314.html Signed-off-by: Christopher Cordahi <christophercordahi@nanometrics.ca> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: cmdlinepart: skip partitions truncated to zeroChristopher Cordahi2013-02-041-9/+8
| | | | | | | | | | Perform flash size truncation before skipping zero sized partition so that if the result is a zero sized, it will be skipped like the others. Signed-off-by: Christopher Cordahi <christophercordahi@nanometrics.ca> Acked-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: cmdlinepart: fix skipping zero sized partitionChristopher Cordahi2013-02-041-0/+1
| | | | | | | | | | Decrement index i after skipping a zero sized partition. On next loop iteration, the index will be the same as before, but the data will be new as it was moved when earlier partition was skipped. Signed-off-by: Christopher Cordahi <christophercordahi@nanometrics.ca> Acked-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: gpmi: Always report ECC stats and return max_bitflipsZach Sadecki2013-02-041-19/+8
| | | | | | | | | Always report corrected and failed ECC stats back up to the MTD layer. Also return max_bitflips from read_page() as is expected from NAND drivers now. Signed-off-by: Zach Sadecki <zsadecki@itwatchdogs.com> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: docg3 fix missing bitreverse libRobert Jarzmik2013-02-041-0/+1
| | | | | | | | | | | Fix missing dependency which can cause a build error such as: ERROR: "byte_rev_table" [drivers/mtd/devices/docg3.ko] undefined! Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: davinci_nand: fix modular build with CONFIG_OF=ySergei Shtylyov2013-02-041-1/+1
| | | | | | | | | | | | | | | Commit cdeadd712f52b16a9285386d61ee26fd14eb4085 (mtd: nand: davinci: add OF support for davinci nand controller) has never been really build tested with the driver as a module. When the driver is built-in, the missing semicolon after structure initializer is "compensated" by MODULE_DEVICE_TABLE() macro being empty and so the initializer using the trailing semicolon on the next line; when the driver is built as a module, compilation error ensues, and as the 'davinci_all_defconfig' has the NAND driver modular, this error prevents DaVinci family kernel from building... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@vger.kernel.org # 3.7
* Drivers: mtd: remove __dev* attributes.Greg Kroah-Hartman2013-01-0414-43/+37
| | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'upstream-3.8-rc1' of git://git.infradead.org/linux-ubiLinus Torvalds2012-12-2012-135/+98
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull UBI update from Artem Bityutskiy: "Nothing exciting, just clean-ups and nicification. Oh, and one small optimization which makes UBI to use less RAM." * tag 'upstream-3.8-rc1' of git://git.infradead.org/linux-ubi: UBI: embed ubi_debug_info field in ubi_device struct UBI: introduce helpers dbg_chk_{io, gen} UBI: replace memcpy with struct assignment UBI: remove spurious comment UBI: gluebi: rename misleading variables UBI: do not allocate the memory unnecessarily UBI: use list_move_tail instead of list_del/list_add_tail
| * UBI: embed ubi_debug_info field in ubi_device structEzequiel Garcia2012-12-104-85/+50
| | | | | | | | | | | | | | | | | | | | ubi_debug_info struct was dynamically allocated which is always suboptimal, for it tends to fragment memory and make the code error-prone. Fix this by embedding it in ubi_device struct. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: introduce helpers dbg_chk_{io, gen}Ezequiel Garcia2012-12-106-14/+23
| | | | | | | | | | | | | | | | | | | | With this patch code is a bit more readable and there's no generated code or functionality impact. Furthermore, this abstracts implementation details and will allow to change ubi_debug_info in a less invasive way. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: replace memcpy with struct assignmentEzequiel Garcia2012-12-033-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This kind of memcpy() is error-prone. Its replacement with a struct assignment is prefered because it's type-safe and much easier to read. Found by coccinelle. Hand patched and reviewed. Tested by compilation only. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier struct_name; struct struct_name to; struct struct_name from; expression E; @@ -memcpy(&(to), &(from), E); +to = from; // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: remove spurious commentEzequiel Garcia2012-11-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This line of comment looks completely bogus. It was introduced in: commit d99383b00eba9c6ac3dea462d718b2849012ee03 Author: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Date: Wed May 18 14:47:34 2011 +0300 UBI: change the interface of a debugging check function Remove it. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: gluebi: rename misleading variablesEzequiel Garcia2012-11-301-14/+14
| | | | | | | | | | | | | | | | | | Both names 'total_read' and 'total_written' are actually used as the number of bytes left to read and write. Fix this confusion by renaming both to 'bytes_left'. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: do not allocate the memory unnecessarilyArtem Bityutskiy2012-10-261-12/+7
| | | | | | | | | | | | | | | | | | UBI reserves an LEB sized buffer for various needs. We can use this buffer while scanning, instead of allocating another one. This patch was originally created by Jan Luebbe <jlu@pengutronix.de>, but then he dropped it and I picked up and tweaked a little bit. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: use list_move_tail instead of list_del/list_add_tailWei Yongjun2012-10-261-4/+2
| | | | | | | | | | | | | | | | | | | | | | Using list_move_tail() instead of list_del() + list_add_tail(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* | Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtdLinus Torvalds2012-12-1993-1638/+2298
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from David Woodhouse: - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim * tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits) mtd: nand: typo in nand_id_has_period() comments mtd: nand/gpio: use io{read,write}*_rep accessors mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited. mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems mtd: nand/docg4: fix and improve read of factory bbt mtd: nand/docg4: reserve bb marker area in ecclayout mtd: nand/docg4: add support for writing in reliable mode mtd: mxc_nand: reorder part_probes to let cmdline override other sources mtd: mxc_nand: fix unbalanced clk_disable() in error path mtd: nandsim: Introduce debugfs infrastructure mtd: physmap_of: error checking to prevent a NULL pointer dereference mtg: docg3: potential divide by zero in doc_write_oob() mtd: bcm47xxnflash: writing support mtd: tests/read: initialize buffer for whole next page mtd: at91: atmel_nand: return bit flips for the PMECC read_page() mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c mtd: nand: onfi need to be probed in 8 bits mode mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width mtd: nand: print flash size during detection mted: nand_wait_ready timeout fix ...
| * | mtd: nand: typo in nand_id_has_period() commentsBrian Norris2012-12-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The simple example provided in the comments for nand_id_has_period() actually has a period of 3, not 2. Silly mistake... Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * | mtd: nand/gpio: use io{read,write}*_rep accessorsMatthew Leach2012-12-131-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The {read,write}s{b,w,l} operations are not defined by all architectures and are being removed from the asm-generic/io.h interface. This patch replaces the usage of these string functions in the mtd gpio accessors with io{read,write}{8,16,32}_rep calls instead. Signed-off-by: Matthew Leach <matthew@mattleach.net> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * | mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.NeilBrown2012-12-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If you create a block2mtd device that is larger than main memory, and write to all of it, then lots of pages will be dirtied but they will never be flushed out as nothing calls any variant of balance_dirty_pages. It would be nice to call set_page_dirty_balance(), but that isn't exported, so just call balance_dirty_pages_ratelimited() directly. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * | mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problemsWolfram Sang2012-12-131-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It could happen (1 out of 100 times) that NAND did not start up correctly after warm rebooting, so the kernel could not find the UBI or DMA timed out due to a stalled BCH. When resetting BCH together with GPMI, the issue could not be observed anymore (after 10000+ reboots). We probably need the consistent state already before sending any command to NAND, even when no ECC is needed. I chose to keep the extra reset for BCH when changing the flash layout to be on the safe side. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Huang Shijie <b32955@freescale.com> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * | mtd: nand/docg4: fix and improve read of factory bbtMike Dunn2012-12-121-5/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does two things related to reading the factory badblock table during initialization: (1) fix error where a non-zero return code from docg4_read_page() is assumed to be an error (it was later changed to be max_bitflips; thanks to Brian Norris for bringing this to my attention a while back), and (2) if there is an error reading the factory bbt, it tries reading another (redundant) factory bbt table. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * | mtd: nand/docg4: reserve bb marker area in ecclayoutMike Dunn2012-12-121-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the nand_ecclayout to place the two bb marker bytes in the oob region off-limits to the user. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * | mtd: nand/docg4: add support for writing in reliable modeMike Dunn2012-12-121-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The controller on the docg4 has a "reliable" mode, where consecutive 2k pages are used in parallel. The initial program loader (IPL) on my Treo 680 expects the secondary program loader (SPL) to be written in this mode. This patch adds support for writing data in reliable mode, by way of a module parameter. Support for reading in this mode (as the IPL does) is not supported yet, but alternate (even-numbered) 2k pages written in reliable mode can be read normally (odd-numbered pages will contain junk and generate ecc errors). Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * | mtd: mxc_nand: reorder part_probes to let cmdline override other sourcesLothar Waßmann2012-12-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cmdline is the easiest to change source of information. Thus let it take precedence over 'RedBoot' and 'ofpart'. This makes the mxc_nand driver to be in sync with all other NAND drivers that support 'cmdlinepart' partition parsing. Also change 'const char *' to 'const char const *' as advised by checkpatch.pl Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * | mtd: mxc_nand: fix unbalanced clk_disable() in error pathLothar Waßmann2012-12-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If nand_scan_ident() or nand_scan_tail() fails, the NAND chip may have been deselected and the clock already disabled. Thus, check 'clk_act' in the error path to decide whether the clock still needs to be disabled. This fixes a: |WARNING: at drivers/clk/clk.c:472 __clk_disable+0x3c/0x78() Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * | mtd: nandsim: Introduce debugfs infrastructureEzequiel Garcia2012-12-101-56/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's more user friendly to report debug information and statistics through debugfs, than to use printing facilites. This patch introduces a very minimal debugfs infrastructure and moves eraseblock wear report to an entry located at: /sys/kernel/debug/nandsim/wear_report This means we can remove rptwear option and just let the user get the wear report when we needs to. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-01 17:16:00 +0100