summaryrefslogtreecommitdiffstats
path: root/drivers/mtd (follow)
Commit message (Collapse)AuthorAgeFilesLines
* UBI: fix a horrible memory deallocation bugArtem Bityutskiy2012-09-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | UBI was mistakingly using 'kfree()' instead of 'kmem_cache_free()' when freeing "attach eraseblock" structures in vtbl.c. Thankfully, this happened only when we were doing auto-format, so many systems were unaffected. However, there are still many users affected. It is strange, but the system did not crash and nothing bad happened when the SLUB memory allocator was used. However, in case of SLOB we observed an crash right away. This problem was introduced in 2.6.39 by commit "6c1e875 UBI: add slab cache for ubi_scan_leb objects" A note for stable trees: Because variable were renamed, this won't cleanly apply to older kernels. Changing names like this should help: 1. ai -> si 2. aeb_slab_cache -> seb_slab_cache 3. new_aeb -> new_seb Reported-by: Richard Genoud <richard.genoud@gmail.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@vger.kernel.org [v2.6.39+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* Merge tag 'fixes-for-linus' of ↵Linus Torvalds2012-08-122-5/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc bug fixes from Arnd Bergmann: "These are a bunch of bug fixes that came in after the merge window and one update for the MAINTAINERS file. The largest part of the fixes are patches that address bugs found by building all the ARM defconfig files. There are a lot more warnings that we have patches for, but the others are either still under discussion or are harmless and do not cause actual problems besides making the build slightly noisy." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits) ARM: davinci: remove broken ntosd2_init_i2c ARM: s3c24xx: enable CONFIG_BUG for tct_hammer omap-rng: fix use of SIMPLE_DEV_PM_OPS spi/s3c64xx: improve error handling mtd/omap2: fix dmaengine_slave_config error handling gpio: em: do not discard em_gio_irq_domain_cleanup ARM: exynos: exynos_pm_add_dev_to_genpd may be unused ARM: imx: gpmi-nand depends on mxs-dma ARM: integrator: include <linux/export.h> ARM: s3c24xx: use new PWM driver ARM: sa1100: include linux/io.h in hackkit leds code Input: eeti_ts: pass gpio value instead of IRQ ARM: pxa: remove irq_to_gpio from ezx-pcap driver ARM: tegra: more regulator fixes for Harmony usb/ohci-omap: remove unused variable mfd/asic3: fix asic3_mfd_probe return value ARM: kirkwood: fix typo in Makefile.boot i.MX27: Fix emma-prp and csi clocks. ARM: integrator: use clk_prepare_enable() for timer MAINTAINERS: update entry for Linus Walleij ...
| * Merge branch 'testing/new-warnings' into fixesArnd Bergmann2012-08-101-4/+3
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These patches all fix bugs that were newly introduced in v3.6-rc1 and found because they cause a gcc warning with one of the ARM defconfigs. Most of them are harmless, but since we're trying to get rid of all warnings eventually, we can start with the ones that were not there before. * testing/new-warnings: omap-rng: fix use of SIMPLE_DEV_PM_OPS spi/s3c64xx: improve error handling mtd/omap2: fix dmaengine_slave_config error handling gpio: em: do not discard em_gio_irq_domain_cleanup ARM: exynos: exynos_pm_add_dev_to_genpd may be unused usb/ohci-omap: remove unused variable mfd/asic3: fix asic3_mfd_probe return value Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * mtd/omap2: fix dmaengine_slave_config error handlingArnd Bergmann2012-08-101-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The newly added dmaengine support in the omap2 nand driver potentially causes an undefined return value from the omap_nand_probe function when dmaengine_slave_config reports an error. Let's handle this by returning the same error back to the caller. Without this patch, building omap2plus_defconfig results in: drivers/mtd/nand/omap2.c: In function 'omap_nand_probe': drivers/mtd/nand/omap2.c:1154:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Grazvydas Ignotas <notasas@gmail.com>
| * | ARM: imx: gpmi-nand depends on mxs-dmaArnd Bergmann2012-08-091-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is not currently possible to build the gpmi-nand driver without also building the mxs-dma driver. Clarify this Kconfig and enable both in the defconfig file so we can build it again with both enabled. drivers/built-in.o: In function `gpmi_dma_filter': clk-fixed-factor.c:(.text+0xafc18): undefined reference to `mxs_dma_is_apbh' make[1]: *** [vmlinux] Error 1 make: *** [sub-make] Error 2 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de>
* | Merge branch 'for-linus' of ↵Linus Torvalds2012-08-031-3/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Make sys_atomic_cmpxchg_32 work on classic m68k m68k/apollo: Rename "timer" to "apollo_timer" zorro: Remove unused zorro_bus.devices m68k: Remove never used asm/shm.h m68k/sun3: Remove unselectable code in prom_init() m68k: Use asm-generic version of <asm/sections.h> m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop} mtd/uclinux: Use generic __bss_stop instead of _ebss m68knommu: Allow ColdFire CPUs to use unaligned accesses m68k: Remove five unused headers m68k: CPU32 does not support unaligned accesses m68k: Introduce config option CPU_HAS_NO_UNALIGNED m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64 m68k: Move CPU_HAS_* config options m68k: Remove duplicate FPU config option m68knommu: Clean up printing of sections m68k: Use asm-generic version of <asm/types.h> m68k: Use Kbuild logic to import asm-generic headers
| * mtd/uclinux: Use generic __bss_stop instead of _ebssGeert Uytterhoeven2012-06-271-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The standard (see BSS_SECTION() in <asm-generic/vmlinux.lds.h> and <asm-generic/sections.h>) symbol for the end of BSS is __bss_stop. This allows to remove all local declarations that have been added to several architectures just to please CONFIG_MTD_UCLINUX. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Greg Ungerer <gerg@uclinux.org>
* | Merge branch 'dmaengine' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2012-08-021-50/+56
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM DMA engine updates from Russell King: "This looks scary at first glance, but what it is is: - a rework of the sa11x0 DMA engine driver merged during the previous cycle, to extract a common set of helper functions for DMA engine implementations. - conversion of amba-pl08x.c to use these helper functions. - addition of OMAP DMA engine driver (using these helper functions), and conversion of some of the OMAP DMA users to use DMA engine. Nothing in the helper functions is ARM specific, so I hope that other implementations can consolidate some of their code by making use of these helpers. This has been sitting in linux-next most of the merge cycle, and has been tested by several OMAP folk. I've tested it on sa11x0 platforms, and given it my best shot on my broken platforms which have the amba-pl08x controller. The last point is the addition to feature-removal-schedule.txt, which will have a merge conflict. Between myself and TI, we're planning to remove the old TI DMA implementation next year." Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt and drivers/dma/{Kconfig,Makefile} * 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits) ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails Add feature removal of old OMAP private DMA implementation mtd: omap2: remove private DMA API implementation mtd: omap2: add DMA engine support spi: omap2-mcspi: remove private DMA API implementation spi: omap2-mcspi: add DMA engine support ARM: omap: remove mmc platform data dma_mask and initialization mmc: omap: remove private DMA API implementation mmc: omap: add DMA engine support mmc: omap_hsmmc: remove private DMA API implementation mmc: omap_hsmmc: add DMA engine support dmaengine: omap: add support for cyclic DMA dmaengine: omap: add support for setting fi dmaengine: omap: add support for returning residue in tx_state method dmaengine: add OMAP DMA engine driver dmaengine: sa11x0-dma: add cyclic DMA support dmaengine: sa11x0-dma: fix DMA residue support dmaengine: PL08x: ensure all descriptors are freed when channel is released dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking ...
| * | mtd: omap2: remove private DMA API implementationRussell King2012-07-311-110/+26
| | | | | | | | | | | | | | | | | | | | | Remove the private DMA API implementation from nand/omap2.c making it use entirely the DMA engine API. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | mtd: omap2: add DMA engine supportRussell King2012-07-311-1/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DMA engine support to the OMAP2 NAND driver. This supplements the private DMA API implementation contained within this driver, and the driver can be independently switched at build time between using DMA engine and the private DMA API. Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2012-07-301-36/+192
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "More hardware support across the field including a bunch of device drivers. The highlight however really are further steps towards device tree. This has been sitting in -next for ages. All MIPS _defconfigs have been tested to boot or where I don't have hardware available, to at least build fine." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (77 commits) MIPS: Loongson 1B: Add defconfig MIPS: Loongson 1B: Add board support MIPS: Netlogic: early console fix MIPS: Netlogic: Fix indentation of smpboot.S MIPS: Netlogic: remove cpu_has_dc_aliases define for XLP MIPS: Netlogic: Remove unused pcibios_fixups MIPS: Netlogic: Add XLP SoC devices in FDT MIPS: Netlogic: Add IRQ mappings for more devices MIPS: Netlogic: USB support for XLP MIPS: Netlogic: XLP PCIe controller support. MIPS: Netlogic: Platform changes for XLR/XLS I2C MIPS: Netlogic: Platform NAND/NOR flash support MIPS: Netlogic: Platform changes for XLS USB MIPS: Netlogic: Remove NETLOGIC_ prefix MIPS: Netlogic: SMP wakeup code update MIPS: Netlogic: Update comments in smpboot.S MIPS: BCM63XX: Add 96328avng reference board MIPS: Expose PCIe drivers for MIPS MIPS: BCM63XX: Add PCIe Support for BCM6328 MIPS: BCM63XX: Move the PCI initialization into its own function ...
| * | | MTD: NAND: JZ4740: Multi-bank support with autodetectionMaarten ter Huurne2012-07-231-36/+192
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The platform data can now specify which external memory banks to probe for NAND chips, and in which order. Banks that contain a NAND are used and the other banks are freed. Squashed version of development done in jz-2.6.38 branch. Original patch by Lars-Peter Clausen with some bug fixes from me. Thanks to Paul Cercueil for the initial autodetection patch. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3560/ Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | | | Merge branch 'v3.5-rc7-fixes' of git://github.com/lunn/linux into fixesArnd Bergmann2012-07-251-1/+5
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From Andrew Lunn <andrew@lunn.ch>: * 'v3.5-rc7-fixes' of git://github.com/lunn/linux: ARM: Kirkwood: Replace mrvl with marvell ARM: Orion: fix driver probe error handling with respect to clk ARM: Dove: Fixup ge00 initialisation ARM: Kirkwood: Fix PHY disable clk problems ARM: Kirkwood: Ensure runit clock always ticks. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | ARM: Kirkwood: Replace mrvl with marvellAndrew Lunn2012-07-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| * | | | ARM: Orion: fix driver probe error handling with respect to clkSimon Baatz2012-07-251-0/+4
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clk patches added code to get and enable clocks in the respective driver probe functions. If the probe function failed for some reason after enabling the clock, the clock was not disabled again in many cases. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lumm <andrew@lunn.ch>
* | | | Merge tag 'upstream-3.6-rc1' of git://git.infradead.org/linux-ubiLinus Torvalds2012-07-245-21/+29
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull UBI changes from Artem Bityutskiy: "Change the default amount of eraseblocks which UBI reserves for bad block handling from 1% to 2%, because 1% does not meet most modern flash requirements. 1% was good enough in the past for old high-quality SLCs, but nowadays 2% is much more appropriate.: Other changes are clean-ups. * tag 'upstream-3.6-rc1' of git://git.infradead.org/linux-ubi: UBI: harmonize the update of ubi->beb_rsvd_pebs UBI: trivial: fix comment of ubi_calculate_reserved function UBI: fix spelling of detach in debug output UBI: Change the default percentage of reserved PEB
| * | | | UBI: harmonize the update of ubi->beb_rsvd_pebsShmulik Ladkani2012-07-183-18/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, there are several locations where an attempt to reserve more PEBs for bad PEB handling is made, with the same code being duplicated. Harmonize it by introducing 'ubi_update_reserved()'. Also, improve the debug message issued, making it more descriptive. Artem: amended the patch a little. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
| * | | | UBI: trivial: fix comment of ubi_calculate_reserved functionShmulik Ladkani2012-07-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function name within the comment was not aligned with the actual function name. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
| * | | | UBI: fix spelling of detach in debug outputPeter Meerwald2012-07-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
| * | | | UBI: Change the default percentage of reserved PEBRichard Genoud2012-07-181-1/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | The actual value (1%) is too low for actual NAND devices, a huge majority of device has 2% maximum bad blocks (SLC or MLC). (Actually it's 20 blocks on a 1024 blocks device, 40/2048...) Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
* / / / VFS: Pass mount flags to sget()David Howells2012-07-141-3/+1
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | Pass mount flags to sget() so that it can use them in initialising a new superblock before the set function is called. They could also be passed to the compare function. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | Merge tag 'for-linus-20120712' of git://git.infradead.org/linux-mtdLinus Torvalds2012-07-133-22/+37
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull late MTD fixes from David Woodhouse: - fix 'sparse warning fix' regression which totally breaks MXC NAND - fix GPMI NAND regression when used with UBI - update/correct sysfs documentation for new 'bitflip_threshold' field - fix nandsim build failure * tag 'for-linus-20120712' of git://git.infradead.org/linux-mtd: mtd: nandsim: don't open code a do_div helper mtd: ABI documentation: clarification of bitflip_threshold mtd: gpmi-nand: fix read page when reading to vmalloced area mtd: mxc_nand: use 32bit copy functions
| * | | mtd: nandsim: don't open code a do_div helperHerton Ronaldo Krzesinski2012-07-061-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't need to open code the divide function, just use div_u64 that already exists and do the same job. While this is a straightforward clean up, there is more to that, the real motivation for this. While building on a cross compiling environment in armel, using gcc 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5), I was getting the following build error: ERROR: "__aeabi_uldivmod" [drivers/mtd/nand/nandsim.ko] undefined! After investigating with objdump and hand built assembly version generated with the compiler, I narrowed __aeabi_uldivmod as being generated from the divide function. When nandsim.c is built with -fno-inline-functions-called-once, that happens when CONFIG_DEBUG_SECTION_MISMATCH is enabled, the do_div optimization in arch/arm/include/asm/div64.h doesn't work as expected with the open coded divide function: even if the do_div we are using doesn't have a constant divisor, the compiler still includes the else parts of the optimized do_div macro, and translates the divisions there to use __aeabi_uldivmod, instead of only calling __do_div_asm -> __do_div64 and optimizing/removing everything else out. So to reproduce, gcc 4.6 plus CONFIG_DEBUG_SECTION_MISMATCH=y and CONFIG_MTD_NAND_NANDSIM=m should do it, building on armel. After this change, the compiler does the intended thing even with -fno-inline-functions-called-once, and optimizes out as expected the constant handling in the optimized do_div on arm. As this also avoids a build issue, I'm marking for Stable, as I think is applicable for this case. Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: stable@vger.kernel.org Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: gpmi-nand: fix read page when reading to vmalloced areaSascha Hauer2012-07-061-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gpmi-nand driver uses virt_addr_valid() to check whether a buffer is suitable for dma. If it's not, a driver allocated buffer is used instead. Then after a page read the driver allocated buffer must be copied to the user supplied buffer. This does not happen since commit 7725cc85932bd02dd12c23108e0ef748c551ccba. This patch fixes the issue. The bug is encountered with UBI which uses a vmalloced buffer for the volume table. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: snijsure@grid-net.com Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | | mtd: mxc_nand: use 32bit copy functionsSascha Hauer2012-07-061-8/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit changes the function used to copy from/to the hardware buffer to memcpy_[from|to]io. This does not work since the hardware cannot handle the byte accesses used by these functions. Instead of reverting this patch introduce 32bit correspondents of these functions. | commit 5775ba36ea9c760c2d7e697dac04f2f7fc95aa62 | Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> | Date: Tue Apr 24 10:05:22 2012 +0200 | | mtd: mxc_nand: fix several sparse warnings about incorrect address space | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> | Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | | | Merge tag 'for-linus-20120706' of git://git.infradead.org/linux-mtdLinus Torvalds2012-07-062-1/+8
|\| | | | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | Pull two MTD fixes from David Woodhouse: - Fix a logic error in OLPC CAFÉ NAND ready() function. - Fix regression due to bitflip handling changes. * tag 'for-linus-20120706' of git://git.infradead.org/linux-mtd: mtd: cafe_nand: fix an & vs | mistake mtd: nand: initialize bitflip_threshold prior to BBT scanning
| * | mtd: cafe_nand: fix an & vs | mistakeDan Carpenter2012-07-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The intent here was clearly to set result to true if the 0x40000000 flag was set. But instead there was a | vs & typo and we always set result to true. Artem: check the spec at wiki.laptop.org/images/5/5c/88ALP01_Datasheet_July_2007.pdf and this fix looks correct. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: nand: initialize bitflip_threshold prior to BBT scanningShmulik Ladkani2012-06-091-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As of edbc454 [mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN], 'mtd->bitflip_threshold' must be set for mtd devices having ECC, prior any 'mtd_read()' call. Otherwise, 'mtd_read()' will falsely return -EUCLEAN. Normally, 'mtd->bitflip_threshold' is initialized when the MTD is added. However, this is too late for NAND MTDs, as 'scan_bbt()' is invoked prior the existing initialization of 'mtd->bitflip_threshold'. This is a problem since 'scan_bbt()' calls 'mtd_read()', in the case of a flash-based bad block table. It resulted in a falsely reported bitflips indication during BBT read, which lead to constant scrubbing of the flash BBT blocks. Initialize 'mtd->bitflip_threshold' to its default value (if not already set by the driver), prior to invocation of 'scan_bbt()'. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | | Merge tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifsLinus Torvalds2012-06-281-4/+4
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ubi/ubifs fixes from Artem Bityutskiy: "Fix the debugfs regression - we never enable it because incorrect 'IS_ENABLED()' macro usage: should be 'IS_ENABLED(CONFIG_DEBUG_FS)', but we had 'IS_ENABLED(DEBUG_FS)'. Also fix incorrect assertion." * tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifs: UBI: correct usage of IS_ENABLED() UBIFS: correct usage of IS_ENABLED() UBIFS: fix assertion
| * | | UBI: correct usage of IS_ENABLED()Brian Norris2012-06-271-4/+4
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit "e9b4cf2 UBI: fix debugfs-less systems support" fixed one regression but introduced a different regression - the debugfs is now always compiled out. Root cause: IS_ENABLED() arguments should be used with the CONFIG_* prefix. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* / / kmsg - kmsg_dump() use iterator to receive log buffer contentKay Sievers2012-06-151-18/+4
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide an iterator to receive the log buffer content, and convert all kmsg_dump() users to it. The structured data in the kmsg buffer now contains binary data, which should no longer be copied verbatim to the kmsg_dump() users. The iterator should provide reliable access to the buffer data, and also supports proper log line-aware chunking of data while iterating. Signed-off-by: Kay Sievers <kay@vrfy.org> Tested-by: Tony Luck <tony.luck@intel.com> Reported-by: Anton Vorontsov <anton.vorontsov@linaro.org> Tested-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | UBI: correct ubi_wl_flush lockingArtem Bityutskiy2012-06-071-4/+13
| | | | | | | | | | | | | | | | | | | | | | Commit "62f38455 UBI: modify ubi_wl_flush function to clear work queue for a lnum" takes the 'work_sem' semaphore in write mode for the entire loop, which is not very good because it will block other workers for potentially long time. We do not need to have it in write mode - read mode is enough, and we do not need to hole it over the entire loop. So this patch turns changes the locking: takes 'work_sem' in read mode and pushes it down to the loop. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* | UBI: fix debugfs-less systems supportArtem Bityutskiy2012-06-071-2/+10
|/ | | | | | | | | | | Commit "aa44d1d UBI: remove Kconfig debugging option" broke UBI and it refuses to initialize if debugfs (CONFIG_DEBUG_FS) is disabled. I incorrectly assumed that debugfs files creation function will return success if debugfs is disabled, but they actually return -ENODEV. This patch fixes the issue. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Tested-by: Paul Parsons <lost.distance@yahoo.com>
* Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtdLinus Torvalds2012-06-0250-704/+1342
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
| * mtd: mxc_nand: move ecc strengh setup before nand_scan_tailSascha Hauer2012-06-011-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 6a918bade9dab40aaef80559bd1169c69e8d69cb, the mxc_nand driver fails with: Driver must set ecc.strength when using hardware ECC This is because nand_scan_tail checks for correct ecc strength settings, so we must set them up before nand_scan_tail. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org [3.4+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: block2mtd: fix recursive call of mtd_writevGabor Juhos2012-06-011-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'mtd_writev' interface calls the function assigned to the '_write' field of a given mtd device if that is not NULL. The block2mtd driver sets the '_writev' field to the 'mtd_writev' function itself and thus causes a endless loop. This is caused by 1dbebd32562b3c2caeca35960e5cb00bfcc12900 (mtd: harmonize mtd_writev usage). Remove the assignment from the block2mtd driver to fix the issue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: stable@kernel.org [3.3+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: gpmi-nand: define ecc.strengthMarek Vasut2012-06-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix an issue which was introduced by the recent addition of ecc.strength. The ecc.strength wasn't set in gpmi-nand, resulting in the following crash: [ 2.550000] kernel BUG at drivers/mtd/nand/nand_base.c:3347! ... [ 2.550000] [<c020841c>] (nand_scan_tail+0x328/0x650) from [<c02f68e0>] (gpmi_nand_probe+0x43c/0x5a4) [ 2.550000] [<c02f68e0>] (gpmi_nand_probe+0x43c/0x5a4) from [<c01f6618>] (platform_drv_probe+0x14/0x18) [ 2.550000] [<c01f6618>] (platform_drv_probe+0x14/0x18) from [<c01f55b0>] (driver_probe_device+0x74/0x1fc) [ 2.550000] [<c01f55b0>] (driver_probe_device+0x74/0x1fc) from [<c01f57cc>] (__driver_attach+0x94/0x98) [ 2.550000] [<c01f57cc>] (__driver_attach+0x94/0x98) from [<c01f3d40>] (bus_for_each_dev+0x50/0x80) [ 2.550000] [<c01f3d40>] (bus_for_each_dev+0x50/0x80) from [<c01f4e18>] (bus_add_driver+0x188/0x25c) [ 2.550000] [<c01f4e18>] (bus_add_driver+0x188/0x25c) from [<c01f5a70>] (driver_register+0x78/0x138) [ 2.550000] [<c01f5a70>] (driver_register+0x78/0x138) from [<c043dc7c>] (gpmi_nand_init+0xc/0x30) [ 2.550000] [<c043dc7c>] (gpmi_nand_init+0xc/0x30) from [<c0008824>] (do_one_initcall+0x108/0x17c) [ 2.550000] [<c0008824>] (do_one_initcall+0x108/0x17c) from [<c042a8b8>] (kernel_init+0xfc/0x1bc) [ 2.550000] [<c042a8b8>] (kernel_init+0xfc/0x1bc) from [<c000fab4>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: of_parts: fix breakage in KconfigFrank Svendsboe2012-06-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | MTD_OF_PARTS and the default setting is not working due to using 'Y' instead of 'y', introduced in commit d6137badeff1ef64b4e0092ec249ebdeaeb3ff37. This made our board, and possibly other boards using DTS defined partitions and not having CONFIG_MTD_OF_PARTS=y defined in the defconfig, fail to mount root. Signed-off-by: Frank Svendsboe <frank.svendsboe@gmail.com> Cc: stable@kernel.org [3.2+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: fix scan_read_raw_oobDmitry Maluka2012-05-291-0/+1
| | | | | | | | | | | | | | | | | | | | It seems there is a bug in scan_read_raw_oob() in nand_bbt.c which should cause wrong functioning of NAND_BBT_SCANALLPAGES option. Artem: the patch did not apply and I had to amend it a bit. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org
| * mtd: docg3 fix in-middle of blocks readsRobert Jarzmik2012-05-291-11/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Corner case reads do not work, and return false data and ECC. This case is typically seen in a ubifs usage, with a read of type: - docg3 docg3: doc_read_oob(from=14882415, mode=1, data=(c30eca40:12), oob=( (null):0)) This results in the following reads: - docg3 docg3: doc_read_data_area(buf= (null), len=111) - docg3 docg3: doc_read_data_area(buf=c30eca40, len=12) - docg3 docg3: doc_read_data_area(buf= (null), len=389) - docg3 docg3: doc_read_data_area(buf= (null), len=0) - docg3 docg3: doc_read_data_area(buf= (null), len=16) If we suppose that the pages content is : - bytes 0 .. 111 : 0x0a - bytes 112 .. 255 : 0x0f Then the returned bytes will be : - 111 times 0x0a (correct) - 0x0a 2 times and 0x0f 10 times (incorrect, should be 0x0a,0x0f) - 0x0f 389 times (correct) - nothing - correct OOB The reason seams that the first 111 bytes read ends between the 2 docg3 planes, and that the first following read (in the 12 bytes sequence, read of 16 bit word) returns the byte of the rightmost plane duplicated in high and lower byte of the word. Fix this behaviour by ensuring that if the previous read ended up in-between the 2 planes, there will be a first 1 byte read to get back to the beginning of leftmost plane. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * mtd: cfi_cmdset_0002: Slight cleanup of fixup messagesDavid Woodhouse2012-05-141-3/+3
| | | | | | | | | | | | These should be semicolons, not commas. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: add fixup for S29NS512P NOR flash.Javier Martin2012-05-141-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | Spansion S29NS512P flash uses a 16bit transfer to report number of sectors instead of two 8bit accesses as CFI specifies. Artem: remove warning message which said that we are applying the fixup - no need to scary the user unnecessarily. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: omap: add support for hardware BCH eccIvan Djelic2012-05-142-0/+285
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two modes are supported: 4-bit and 8-bit error correction. Note that 4-bit mode is only confirmed to work on OMAP3630 ES 1.x, x >= 1. The OMAP3 GPMC hardware BCH engine computes remainder polynomials, it does not provide automatic error location and correction: this step is implemented using the BCH library. This implementation only protects page data, there is no support for protecting user-defined spare area bytes (this could be added with few modifications); therefore, it cannot be used with YAFFS2 or other similar filesystems that depend on oob storage. Before being stored to nand flash, hardware BCH ecc is adjusted so that an erased page has a valid ecc; thus allowing correction of bitflips in blank pages (also common on 4-bit devices). BCH correction mode is selected at runtime by setting platform data parameter 'ecc_opt' to value OMAP_ECC_BCH4_CODE_HW or OMAP_ECC_BCH8_CODE_HW. This code has been tested with mtd test modules, UBI and UBIFS on a BeagleBoard revC3 (OMAP3530 ES3.0 + Micron NAND 256MiB 1,8V 16-bit). Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: check the return code of 'read_oob/read_oob_raw'Shmulik Ladkani2012-05-141-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | Apparently, there is an implementor of 'read_oob' which may return an error inidication (e.g. docg4_read_oob may return -EIO). Test the return value of 'read_oob/read_oob_raw', and if negative, propagate the error, so it's returned by the '_read_oob' interface. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'Shmulik Ladkani2012-05-146-30/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As of [mtd: nand: remove autoincrement 'sndcmd' code], the NAND_CMD_READ0 command is issued unconditionally. Thus, read_oob/read_oob_raw's 'sndcmd' argument is no longer needed, as well as their return code. Remove the 'sndcmd' parameter, and set the return code to 0. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: m25p80: Add support for Winbond W25Q80BWThomas Abraham2012-05-141-0/+1
| | | | | | | | | | | | | | | | Winbond W25Q80BW is a 8Mbit serial flash memory device. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: gpmi: add gpmi support for mx6qHuang Shijie2012-05-145-16/+45
| | | | | | | | | | | | | | | | | | add gpmi support for mx6q. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: gpmi: add device tree support to gpmi-nandHuang Shijie2012-05-143-69/+68
| | | | | | | | | | | | | | | | | | This patch just adds the DT support to gpmi-nand. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: nand: utilize oob_required parameterBrian Norris2012-05-141-2/+4
| | | | | | | | | | | | | | | | Don't read/write OOB if the caller doesn't require it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: gpmi-nand: utilize oob_requested parameterBrian Norris2012-05-141-15/+18
| | | | | | | | | | | | | | | | | | Don't read OOB if the caller didn't request it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 18:07:19 +0100