summaryrefslogtreecommitdiffstats
path: root/drivers/mtd (follow)
Commit message (Collapse)AuthorAgeFilesLines
* mtd: rawnand: stm32_fmc2: fix broken ECCChristophe Kerello2020-10-301-7/+8
| | | | | | | | | | | | | Since commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits"), ECC are broken in FMC2 driver in case of nand-ecc-step-size and nand-ecc-strength are not set in the device tree. To avoid this issue, the default settings are now set in stm32_fmc2_nfc_attach_chip function. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1604064819-26861-1-git-send-email-christophe.kerello@st.com
* mtd: spi-nor: Fix address width on flash chips > 16MBBert Vermeulen2020-10-281-3/+5
| | | | | | | | | | | | | | | | | | | If a flash chip has more than 16MB capacity but its BFPT reports BFPT_DWORD1_ADDRESS_BYTES_3_OR_4, the spi-nor framework defaults to 3. The check in spi_nor_set_addr_width() doesn't catch it because addr_width did get set. This fixes that check. Fixes: f9acd7fa80be ("mtd: spi-nor: sfdp: default to addr_width of 3 for configurable widths") Signed-off-by: Bert Vermeulen <bert@biot.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20201006132346.12652-1-bert@biot.com
* mtd: spi-nor: Don't copy self-pointing struct aroundAlexander Sverdlin2020-10-281-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spi_nor_parse_sfdp() modifies the passed structure so that it points to itself (params.erase_map.regions to params.erase_map.uniform_region). This makes it impossible to copy the local struct anywhere else. Therefore only use memcpy() in backup-restore scenario. The bug may show up like below: BUG: unable to handle page fault for address: ffffc90000b377f8 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 3500 Comm: flashcp Tainted: G O 5.4.53-... #1 ... RIP: 0010:spi_nor_erase+0x8e/0x5c0 Code: 64 24 18 89 db 4d 8b b5 d0 04 00 00 4c 89 64 24 18 4c 89 64 24 20 eb 12 a8 10 0f 85 59 02 00 00 49 83 c6 10 0f 84 4f 02 00 00 <49> 8b 06 48 89 c2 48 83 e2 c0 48 89 d1 49 03 4e 08 48 39 cb 73 d8 RSP: 0018:ffffc9000217fc48 EFLAGS: 00010206 RAX: 0000000000740000 RBX: 0000000000000000 RCX: 0000000000740000 RDX: ffff8884550c9980 RSI: ffff88844f9c0bc0 RDI: ffff88844ede7bb8 RBP: 0000000000740000 R08: ffffffff815bfbe0 R09: ffff88844f9c0bc0 R10: 0000000000000000 R11: 0000000000000000 R12: ffffc9000217fc60 R13: ffff88844ede7818 R14: ffffc90000b377f8 R15: 0000000000000000 FS: 00007f4699780500(0000) GS:ffff88846ff00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc90000b377f8 CR3: 00000004538ee000 CR4: 0000000000340fe0 Call Trace: part_erase+0x27/0x50 mtdchar_ioctl+0x831/0xba0 ? filemap_map_pages+0x186/0x3d0 ? do_filp_open+0xad/0x110 ? _copy_to_user+0x22/0x30 ? cp_new_stat+0x150/0x180 mtdchar_unlocked_ioctl+0x2a/0x40 do_vfs_ioctl+0xa0/0x630 ? __do_sys_newfstat+0x3c/0x60 ksys_ioctl+0x70/0x80 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x6a/0x200 ? prepare_exit_to_usermode+0x50/0xd0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f46996b6817 Cc: stable@vger.kernel.org Fixes: c46872170a54 ("mtd: spi-nor: Move erase_map to 'struct spi_nor_flash_parameter'") Co-developed-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Baurzhan Ismagulov <ibr@radix50.net> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20201005084803.23460-1-alexander.sverdlin@nokia.com
* mtd: rawnand: ifc: Move the ECC engine initialization to the right placeFabio Estevam2020-10-261-19/+24
| | | | | | | | | | | | | | | | | | | | | No ECC initialization should happen during the host controller probe. In fact, we need the probe function to call nand_scan() in order to: - identify the device, its capabilities and constraints (nand_scan_ident()) - configure the ECC engine accordingly (->attach_chip()) - scan its content and prepare the core (nand_scan_tail()) Moving these lines to fsl_ifc_attach_chip() fixes a regression caused by a previous commit supposed to clarify these steps. Based on a fix done for the mxc_nand driver by Miquel Raynal. Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits") Reported-by: Han Xu <xhnjupt@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Han Xu <xhnjupt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201016132626.30112-1-festevam@gmail.com
* mtd: rawnand: mxc: Move the ECC engine initialization to the right placeFabio Estevam2020-10-261-12/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | No ECC initialization should happen during the host controller probe. In fact, we need the probe function to call nand_scan() in order to: - identify the device, its capabilities and constraints (nand_scan_ident()) - configure the ECC engine accordingly (->attach_chip()) - scan its content and prepare the core (nand_scan_tail()) Moving these lines to mxcnd_attach_chip() fixes a regression caused by a previous commit supposed to clarify these steps. When moving the ECC initialization from probe() to attach(), get rid of the pdata usage to determine the engine type and let the core decide instead. Tested on a imx27-pdk board. Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits") Reported-by: Fabio Estevam <festevam@gmail.com> Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201016213613.1450-1-festevam@gmail.com
* Merge tag 'for-linus-5.10-rc1-part2' of ↵Linus Torvalds2020-10-181-0/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull more ubi and ubifs updates from Richard Weinberger: "UBI: - Correctly use kthread_should_stop in ubi worker UBIFS: - Fixes for memory leaks while iterating directory entries - Fix for a user triggerable error message - Fix for a space accounting bug in authenticated mode" * tag 'for-linus-5.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: journal: Make sure to not dirty twice for auth nodes ubifs: setflags: Don't show error message when vfs_ioc_setflags_prepare() fails ubifs: ubifs_jnl_change_xattr: Remove assertion 'nlink > 0' for host inode ubi: check kthread_should_stop() after the setting of task state ubifs: dent: Fix some potential memory leaks while iterating entries ubifs: xattr: Fix some potential memory leaks while iterating entries
| * ubi: check kthread_should_stop() after the setting of task stateZhihao Cheng2020-09-171-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A detach hung is possible when a race occurs between the detach process and the ubi background thread. The following sequences outline the race: ubi thread: if (list_empty(&ubi->works)... ubi detach: set_bit(KTHREAD_SHOULD_STOP, &kthread->flags) => by kthread_stop() wake_up_process() => ubi thread is still running, so 0 is returned ubi thread: set_current_state(TASK_INTERRUPTIBLE) schedule() => ubi thread will never be scheduled again ubi detach: wait_for_completion() => hung task! To fix that, we need to check kthread_should_stop() after we set the task state, so the ubi thread will either see the stop bit and exit or the task state is reset to runnable such that it isn't scheduled out indefinitely. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> Fixes: 801c135ce73d5df1ca ("UBI: Unsorted Block Images") Reported-by: syzbot+853639d0cb16c31c7a14@syzkaller.appspotmail.com Signed-off-by: Richard Weinberger <richard@nod.at>
* | Merge tag 'mtd/for-5.10' of ↵Linus Torvalds2020-10-1789-980/+2051
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC HyperBus changes: - DMA support for TI's AM654 HyperBus controller driver. - HyperBus frontend driver for Renesas RPC-IF driver. SPI NOR core changes: - Support for Winbond w25q64jwm flash - Enable 4K sector support for mx25l12805d SPI NOR controller drivers changes: - intel-spi Add Alder Lake-S PCI ID MTD Core changes: - mtdoops: Don't run panic write twice - mtdconcat: Correctly handle panic write - Use DEFINE_SHOW_ATTRIBUTE" * tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits) mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled mtd: hyperbus: add Renesas RPC-IF driver Revert "mtd: spi-nor: Prefer asynchronous probe" mtd: parsers: bcm63xx: Do not make it modular mtd: spear_smi: Enable compile testing mtd: maps: vmu-flash: fix typos for struct memcard mtd: physmap: Add Baikal-T1 physically mapped ROM support mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu mtd: onenand: simplify the return expression of onenand_transfer_auto_oob mtd: rawnand: cadence: remove a redundant dev_err call mtd: rawnand: ams-delta: Fix non-OF build warning mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops() mtd: rawnand: Introduce nand_set_ecc_on_host_ops() mtd: rawnand: atmel: Check return values for nand_read_data_op mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size() mtd: rawnand: qcom: Simplify with dev_err_probe() mtd: rawnand: marvell: Fix and update kerneldoc mtd: rawnand: marvell: Simplify with dev_err_probe() mtd: rawnand: gpmi: Simplify with dev_err_probe() mtd: rawnand: atmel: Simplify with dev_err_probe() ...
| * | mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabledVignesh Raghavendra2020-10-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver") leads to build failure[1] with COMPILE_TEST and RPCIF_HYPERBUS enabled. This is because driver needs functions RENESAS_RPCIF which is only buildable for CONFIG_ARCH_RENESAS. Fix this by dropping COMPILE_TEST from RPCIF_HYPERBUS Kconfig entry. This ensures driver can be built only when RENESAS_RPCIF is also selected. [1]: rpc-if.c:(.text+0x20): undefined reference to `rpcif_disable_rpm' ld: drivers/mtd/hyperbus/rpc-if.o: in function `rpcif_hb_prepare_read': rpc-if.c:(.text+0xd6): undefined reference to `rpcif_prepare' ld: drivers/mtd/hyperbus/rpc-if.o: in function `rpcif_hb_read16': [...] Fixes: 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver") leads Reported-by: Richard Weinberger <richard@nod.at> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Richard Weinberger <richard@nod.at>
| * | Merge tag 'cfi/for-5.10' of ↵Richard Weinberger2020-10-114-16/+306
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gitolite.kernel.org:pub/scm/linux/kernel/git/mtd/linux into mtd/next HyperBus changes * DMA support for TI's AM654 HyperBus controller driver. * HyperBus frontend driver for Renesas RPC-IF driver.
| | * | mtd: hyperbus: add Renesas RPC-IF driverSergei Shtylyov2020-10-063-0/+178
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the HyperFLash driver for the Renesas RPC-IF. It's the "front end" driver using the "back end" APIs in the main driver to talk to the real hardware. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/78abb851-2beb-fe7d-87e5-ce58ee877d35@gmail.com
| | * | mtd: hyperbus: hbmc-am654: Add DMA support for readsVignesh Raghavendra2020-09-301-1/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AM654 HyperBus controller provides MMIO interface to read data from flash. So add DMA memcpy support for reading data over MMIO interface. This provides 5x improvement in throughput and reduces CPU usage as well. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200924081214.16934-5-vigneshr@ti.com
| | * | mtd: hyperbus: hbmc-am654: Drop pm_runtime* calls from probeVignesh Raghavendra2020-09-301-14/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent genpd changes for K3 platform ensure device is ON before driver probe is called. Therefore, drop redundant pm_runtime_* calls from driver to simplify the code. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200924081214.16934-4-vigneshr@ti.com
| | * | mtd: hyperbus: hbmc-am654: Fix direct mapping setup flash accessVignesh Raghavendra2020-09-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting up of direct mapping should be done with flash node's IO address space and not with controller's IO region. Fixes: b6fe8bc67d2d3 ("mtd: hyperbus: move direct mapping setup to AM654 HBMC driver") Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200924081214.16934-3-vigneshr@ti.com
| * | | Merge tag 'spi-nor/for-5.10' of ↵Richard Weinberger2020-10-115-44/+35
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI NOR core changes: - Support for Winbond w25q64jwm flash - Enable 4K sector support for mx25l12805d SPI NOR controller drivers changes: - intel-spi: - Add Alder Lake-S PCI ID
| | * | | Revert "mtd: spi-nor: Prefer asynchronous probe"Vignesh Raghavendra2020-10-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 03edda0e1edaa3c2e99239c66e3c14d749318fd6. This leads to warn dump like [1] on some platforms and reorders MTD devices which may break user space expectations [2]. So revert the change. [1]: [ 1.849801] ------------[ cut here ]------------ [ 1.854271] mscc_felix 0000:00:00.5: device is disabled, skipping [ 1.858753] WARNING: CPU: 1 PID: 7 at kernel/kmod.c:136 __request_module+0x3a4/0x568 [...] [2] Bug report: https://lore.kernel.org/linux-mtd/20201003150633.23416-1-michael@walle.cc/ Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201005090321.8724-1-vigneshr@ti.com
| | * | | mtd: spi-nor: winbond: Add support for w25q64jwmIkjoon Jang2020-09-291-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support Winbond w25q{64,128,256}jwm which are identical to existing w25q32jwm except for their sizes. This was tested with w25q64jwm, basic erase/write/readback and lock/unlock both lower/upper blocks were okay. Signed-off-by: ikjn@chromium.org <ikjn@chromium.org> Signed-off-by: Xingyu Wu <wuxy@bitland.corp-partner.google.com> Signed-off-by: ST Lin <stlin2@winbond.com> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200928060631.2090541-1-ikjn@chromium.org
| | * | | mtd: spi-nor: intel-spi: Add support for Intel Alder Lake-S SPI serial flashMika Westerberg2020-09-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel Alder Lake-S has the same SPI serial flash controller as Cannon Lake. Add Alder Lake-S PCI ID to the driver list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200925095109.51148-1-mika.westerberg@linux.intel.com
| | * | | mtd: spi-nor: macronix: Add SECT_4K to mx25l12805dRobert Marko2020-09-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the mx25l12805d datasheet it supports using 4K or 64K sectors. So lets add the SECT_4K to enable 4K sector usage. Datasheet: https://www.mxic.com.tw/Lists/Datasheet/Attachments/7321/MX25L12805D,%203V,%20128Mb,%20v1.2.pdf Cc: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200915100623.708736-1-robert.marko@sartura.hr
| | * | | mtd: spi-nor: Prefer asynchronous probeDouglas Anderson2020-09-291-0/+1
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On my system the spi_nor_probe() took ~6 ms at bootup. That's not a lot, but every little bit adds up to a slow bootup. While we can get this out of the boot path by making it a module, there are times where it is convenient (or even required) for this to be builtin the kernel. Let's set that we prefer async probe so that we don't block other drivers from probing while we are probing. This is a tiny little change that is almost guaranteed to be safe for anything that is able to run as a module, which SPI_NOR is. Specifically modules are already probed asynchronously. Also: since other things in the system may have enabled asynchronous probe the system may already be doing other things during our probe. There is a small possibility that some other driver that was a client of SPI_NOR didn't handle -EPROBE_DEFER and was relying on probe ordering and only worked when the SPI_NOR and the SPI bus were builtin. In that case the other driver has a bug that's waiting to hit and the other driver should be fixed. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200902160002.1.I658d1c0db9adfeb9a59bc55e96a19e192c959e55@changeid
| * | | Merge tag 'nand/for-5.10' of ↵Richard Weinberger2020-10-1168-905/+1458
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: * Use the new generic ECC object * Create helpers to set/extract the ECC requirements * Create a helper to extract the ECC configuration * Add a NAND page I/O request type * Introduce the ECC engine framework Raw NAND core changes: * Don't overwrite the error code from nand_set_ecc_soft_ops() * Introduce nand_set_ecc_on_host_ops() * Use the NAND framework user_conf object for ECC flags * Use the ECC framework user input parsing bits * Use the ECC framework nand_ecc_is_strong_enough() helper * Use the ECC framework OOB layouts * Make use of the ECC framework * Use nanddev_get/set_ecc_requirements() when relevant * Use the new ECC engine type enumeration * Separate the ECC engine type and the ECC byte placement * Move the nand_ecc_algo enum to the generic NAND layer * Rename the ECC algorithm enumeration items * Add a kernel doc to the ECC algorithm enumeration * DT bindings: - Document boolean NAND ECC properties - Document nand-ecc-engine - Document nand-ecc-placement Raw NAND drivers changes: * Ams-Delta: Fix non-OF build warning * Atmel: - Check return values for nand_read_data_op - Simplify with dev_err_probe() - Get rid of the legacy interface implementation - Convert the driver to exec_op() - Use nand_prog_page_end_op() - Use nand_{write,read}_data_op() - Drop redundant nand_read_page_op() - Enable the NFC controller at probe time - Disable clk on error handling path in probe * Cadence: remove a redundant dev_err call * Gpmi: - Simplify with dev_err_probe() * Marvell: - Fix and update kerneldoc - Simplify with dev_err_probe() - Fix and update kerneldoc - Simplify with dev_err_probe() - Support panic_write for mtdoops * Onenand: - Simplify the return expression of onenand_transfer_auto_oob - Simplify with dev_err_probe() * Oxnas: cleanup/simplify code * Pasemi: Make pasemi_device_ready() static * Qcom: Simplify with dev_err_probe() * Stm32_fmc2: fix a buffer overflow * Vf610: Remove unused function vf610_nfc_transfer_size() SPI-NAND changes: * Use nanddev_get_ecc_conf() when relevant * Gigadevice: - Add support for GD5F4GQ4xC - Add QE Bit - Use only one dummy byte in QUADIO * Macronix: - Add support for MX31UF1GE4BC - Add support for MX31LF1GE4BC
| | * | | mtd: onenand: simplify the return expression of onenand_transfer_auto_oobLiu Shixin2020-09-301-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200921082441.2591669-1-liushixin2@huawei.com
| | * | | mtd: rawnand: cadence: remove a redundant dev_err callLiu Shixin2020-09-301-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is an error message within devm_ioremap_resource already, so remove the dev_err call to avoid a redundant error message. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200921013805.1724606-1-liushixin2@huawei.com
| | * | | mtd: rawnand: ams-delta: Fix non-OF build warningJanusz Krzysztofik2020-09-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7c2f66a960fc ("mtd: rawnand: ams-delta: Add module device tables") introduced an OF module device table but wrapped a reference to it with of_match_ptr() which resolves to NULL in non-OF configs. That resulted in a clang compiler warning on unused variable in non-OF builds. Fix it. drivers/mtd/nand/raw/ams-delta.c:373:34: warning: unused variable 'gpio_nand_of_id_table' [-Wunused-const-variable] static const struct of_device_id gpio_nand_of_id_table[] = { ^ 1 warning generated. Fixes: 7c2f66a960fc ("mtd: rawnand: ams-delta: Add module device tables") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200919080403.17520-1-jmkrzyszt@gmail.com
| | * | | mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops()Tudor Ambarus2020-09-301-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error code received from nand_set_ecc_soft_ops() was overwritten, drop this redundant assignment and use the error code received from the callee. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200917075213.532161-4-tudor.ambarus@microchip.com
| | * | | mtd: rawnand: Introduce nand_set_ecc_on_host_ops()Tudor Ambarus2020-09-301-53/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were too many levels of indentation and the code was hard to read. Introduce a new function, similar to nand_set_ecc_soft_ops(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200917075213.532161-3-tudor.ambarus@microchip.com
| | * | | mtd: rawnand: atmel: Check return values for nand_read_data_opAlex Dewar2020-09-301-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In atmel_nand_pmecc_read_pg(), nand_read_data_op() is called twice without the return values being checked for errors. Add these checks. Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200914214245.14626-1-alex.dewar90@gmail.com
| | * | | mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()YueHaibing2020-09-301-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ecc40b8df59a ("mtd: rawnand: vf610_nfc: remove old hooks") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200909134318.36340-1-yuehaibing@huawei.com
| | * | | mtd: rawnand: qcom: Simplify with dev_err_probe()Krzysztof Kozlowski2020-09-301-16/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-6-krzk@kernel.org
| | * | | mtd: rawnand: marvell: Fix and update kerneldocKrzysztof Kozlowski2020-09-301-7/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix kerneldoc comments and add missing documentation for members to fix W=1 compile warnings like: drivers/mtd/nand/raw/marvell_nand.c:251: warning: cannot understand function prototype: 'struct marvell_hw_ecc_layout ' drivers/mtd/nand/raw/marvell_nand.c:342: warning: Function parameter or member 'layout' not described in 'marvell_nand_chip' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-5-krzk@kernel.org
| | * | | mtd: rawnand: marvell: Simplify with dev_err_probe()Krzysztof Kozlowski2020-09-301-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-4-krzk@kernel.org
| | * | | mtd: rawnand: gpmi: Simplify with dev_err_probe()Krzysztof Kozlowski2020-09-301-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-3-krzk@kernel.org
| | * | | mtd: rawnand: atmel: Simplify with dev_err_probe()Krzysztof Kozlowski2020-09-301-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-2-krzk@kernel.org
| | * | | mtd: onenand: Simplify with dev_err_probe()Krzysztof Kozlowski2020-09-301-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-1-krzk@kernel.org
| | * | | mtd: rawnand: marvell: Support panic_write for mtdoopsChris Packham2020-09-301-5/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under a panic context we can't get an interrupt. Actively poll for the RB status when performing a panic_write. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200828011237.22066-1-chris.packham@alliedtelesis.co.nz
| | * | | mtd: spinand: gigadevice: Add support for GD5F4GQ4xCHauke Mehrtens2020-09-301-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the following 4GiB chips: GD5F4GQ4RCYIG 1.8V GD5F4GQ4UCYIG 3.3V The datasheet can be found here: https://www.novitronic.ch/sixcms/media.php/2/DS-00173-GD5F4GQ4xCxIG-Rev1.574695.pdf The GD5F4GQ4UCYIGT (3.3V) version is used on the Imagination Technologies Creator Ci40 (Marduk), the 1.8V version was not tested. This device only works in single SPI mode and not in dual or quad mode for me on this board. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-4-hauke@hauke-m.de
| | * | | mtd: spinand: gigadevice: Add QE BitHauke Mehrtens2020-09-301-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following GigaDevice chips have the QE BIT in the feature flags, I checked the datasheets, but did not try this. * GD5F1GQ4xExxG * GD5F1GQ4xFxxG * GD5F1GQ4UAYIG * GD5F4GQ4UAYIG The Quad operations like 0xEB mention that the QE bit has to be set. Fixes: c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-3-hauke@hauke-m.de
| | * | | mtd: spinand: gigadevice: Only one dummy byte in QUADIOHauke Mehrtens2020-09-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The datasheet only lists one dummy byte in the 0xEH operation for the following chips: * GD5F1GQ4xExxG * GD5F1GQ4xFxxG * GD5F1GQ4UAYIG * GD5F4GQ4UAYIG Fixes: c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-2-hauke@hauke-m.de
| | * | | mtd: rawnand: vf610: disable clk on error handling path in probeEvgeny Novikov2020-09-301-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vf610_nfc_probe() does not invoke clk_disable_unprepare() on one error handling path. The patch fixes that. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 6f0ce4dfc5a3 ("mtd: rawnand: vf610: Avoid a potential NULL pointer dereference") Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200806072634.23528-1-novikov@ispras.ru
| | * | | mtd: rawnand: oxnas: cleanup/simplify codePavel Machek2020-09-301-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify oxnas_nand_probe. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200724083825.GA31437@amd
| | * | | mtd: spinand: macronix: Add support for MX31UF1GE4BCYouChing Lin2020-09-301-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Macronix MX31UF1GE4BC is a 1.8V, 1Gbit (128MB) serial NAND flash device. Validated by read, erase, read back, write and read back on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host (driver/spi/spi-mxic.c). Signed-off-by: YouChing Lin <ycllin@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1595404978-31079-3-git-send-email-ycllin@mxic.com.tw
| | * | | mtd: spinand: macronix: Add support for MX31LF1GE4BCYouChing Lin2020-09-301-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Macronix MX31LF1GE4BC is a 3V, 1Gbit (128MB) serial NAND flash device. Validated by read, erase, read back, write and read back on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host (driver/spi/spi-mxic.c). Signed-off-by: YouChing Lin <ycllin@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1595404978-31079-2-git-send-email-ycllin@mxic.com.tw
| | * | | mtd: rawnand: pasemi: Make pasemi_device_ready() staticWei Yongjun2020-09-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sparse tool complains as follows: drivers/mtd/nand/raw/pasemi_nand.c:71:5: warning: symbol 'pasemi_device_ready' was not declared. Should it be static? This function is not used outside of pasemi_nand.c, so this commit marks it static. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200721151657.41027-1-weiyongjun1@huawei.com
| | * | | mtd: rawnand: stm32_fmc2: fix a buffer overflowChristophe Kerello2020-09-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch solves following static checker warning: drivers/mtd/nand/raw/stm32_fmc2_nand.c:350 stm32_fmc2_nfc_select_chip() error: buffer overflow 'nfc->data_phys_addr' 2 <= 2 The CS value can only be 0 or 1. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1595325127-32693-1-git-send-email-christophe.kerello@st.com
| | * | | mtd: rawnand: atmel: Get rid of the legacy interface implementationBoris Brezillon2020-09-301-197/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that exec_op() is implemented, we can get rid of all the legacy hooks. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-7-tudor.ambarus@microchip.com
| | * | | mtd: rawnand: atmel: Convert the driver to exec_op()Boris Brezillon2020-09-301-0/+267
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both SMC and HSMC are converted to exec_op(). Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-6-tudor.ambarus@microchip.com
| | * | | mtd: rawnand: atmel: Use nand_prog_page_end_op()Boris Brezillon2020-09-301-14/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nand_prog_page_end_op() sequence is open-coded in atmel_hsmc_nand_pmecc_write_pg(). Let's use the generic helper here. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-5-tudor.ambarus@microchip.com
| | * | | mtd: rawnand: atmel: Use nand_{write,read}_data_op()Boris Brezillon2020-09-301-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the nand_{write,read}_data_op() helpers instead of calling the atmel_nand_{read,write}_buf() functions directly. This will ease the transition to exec_op(). Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-4-tudor.ambarus@microchip.com
| | * | | mtd: rawnand: atmel: Drop redundant nand_read_page_op()Boris Brezillon2020-09-301-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The legacy page read path in atmel_hsmc_nand_pmecc_read_pg() issues a nand_read_page_op() that's already issued by atmel_nand_pmecc_read_pg(). Let's get rid of the unneeded one. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-3-tudor.ambarus@microchip.com
| | * | | mtd: rawnand: atmel: Enable the NFC controller at probe timeBoris Brezillon2020-09-301-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No need to enable it everytime select_chip() is called. If we really care about PM, we should implement runtime PM hooks and disable the controller and all its clocks when the controller has been unused for some time. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-2-tudor.ambarus@microchip.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 12:10:40 +0100