summaryrefslogtreecommitdiffstats
path: root/drivers/net/Kconfig (follow)
Commit message (Collapse)AuthorAgeFilesLines
* NET_SB1250_MAC: Rename to SB1250_MACMaciej W. Rozycki2007-10-111-1/+1
| | | | | | | Rename NET_SB1250_MAC to SB1250_MAC to follow the convention. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NET_SB1250_MAC: Update Kconfig entryMaciej W. Rozycki2007-10-111-4/+12
| | | | | | | | The SB1250 network interfaces are Gigabit Ethernet ones. Move the Kconfig entry to the appropriate section and add some help text. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Device tree aware EMAC driverDavid Gibson2007-10-111-69/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Based on BenH's earlier work, this is a new version of the EMAC driver for the built-in ethernet found on PowerPC 4xx embedded CPUs. The same ASIC is also found in the Axon bridge chip. This new version is designed to work in the arch/powerpc tree, using the device tree to probe the device, rather than the old and ugly arch/ppc OCP layer. This driver is designed to sit alongside the old driver (that lies in drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The old driver is left in place to support arch/ppc until arch/ppc itself reaches its final demise (not too long now, with luck). This driver still has a number of things that could do with cleaning up, but I think they can be fixed up after merging. Specifically: - Should be adjusted to properly use the dma mapping API. Axon needs this. - Probe logic needs reworking, in conjuction with the general probing code for of_platform devices. The dependencies here between EMAC, MAL, ZMII etc. make this complicated. At present, it usually works, because we initialize and register the sub-drivers before the EMAC driver itself, and (being in driver code) runs after the devices themselves have been instantiated from the device tree. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Blackfin EMAC driver: add a select for the PHYLIB of this driverBryan Wu2007-10-111-0/+2
| | | | | | | | Since we are adding requirement for the PHYLIB for this driver, there should be a select for that Cc: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [B44]: port to native ssb supportMichael Buesch2007-10-111-4/+24
| | | | | Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [NET]: Add Tehuti network driver.Andy Gospodarek2007-10-111-0/+6
| | | | | | [ Ported to napi_struct changes... -DaveM ] Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPG]: add IP1000A driver to kernel treeFrancois Romieu2007-10-111-0/+9
| | | | | | | | Signed-off-by: Jesse Huang <jesse@icplus.com.tw> Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: driver for Intel(R) 82598 PCI-Express 10GbE adapters (v4)Auke Kok2007-10-111-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Intel 82598 PCI-Express 10GbE chipset. Devices will be available on the market soon. This version of the driver is largely the same as the last release: * Driver uses a single RX and single TX queue, each using 1 MSI-X irq vector. * Driver runs in NAPI mode only * Driver is largely multiqueue-ready (TM) Changes since 20070803: * removed wrappers for hardware functions * incorporated e1000e-style HW api reorganization code * sparse/checkpatch cleanups, namespace cleanups * driver prints out extra debugging information at load time identifying adapter board number, mac, phy types * removed ixgbe_api.c, ixgbe_api.h, ixgbe_osdep.h * driver update to 1.1.18 * removed ixgbe.txt which contained no useful info anymore [ Integrated napi_struct changes from Auke as well... -DaveM ] Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* dl2k: add Sundance/Tamarack TC902x Gigabit Ethernet Adapter supportKomuro2007-10-111-3/+4
| | | | | | | | Actually, D-Link modified the VendorID/ProductID of the TC902x. The TC902x is the original chipset. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)Auke Kok2007-10-111-0/+23
| | | | | | | | | | | | | | | | | | | | This driver implements support for the ICH9 on-board LAN ethernet device. The device is similar to ICH8. The driver encompasses code to support 82571/2/3, es2lan and ICH8 devices as well, but those device IDs are disabled and will be "lifted" from the e1000 driver over one at a time once this driver receives some more live time. Changes to the last snapshot posted are exclusively in the internal hardware API organization. Many thanks to Jeff Garzik for jumping in and getting this organized with a keen eye on the future layout. [ Integrated napi_struct patch from Auke as well... -DaveM ] Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* IOC3: Switch hw checksumming to ethtool configurable.Ralf Baechle2007-10-111-20/+0
| | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [NET] netconsole: Support dynamic reconfiguration using configfsSatyam Sharma2007-10-111-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. This patch introduces support for dynamic reconfiguration (adding, removing and/or modifying parameters of netconsole targets at runtime) using a userspace interface exported via configfs. Documentation is also updated accordingly. Issues and brief design overview: (1) Kernel-initiated creation / destruction of kernel objects is not possible with configfs -- the lifetimes of the "config items" is managed exclusively from userspace. But netconsole must support boot/module params too, and these are parsed in kernel and hence netpolls must be setup from the kernel. Joel Becker suggested to separately manage the lifetimes of the two kinds of netconsole_target objects -- those created via configfs mkdir(2) from userspace and those specified from the boot/module option string. This adds complexity and some redundancy here and also means that boot/module param-created targets are not exposed through the configfs namespace (and hence cannot be updated / destroyed dynamically). However, this saves us from locking / refcounting complexities that would need to be introduced in configfs to support kernel-initiated item creation / destroy there. (2) In configfs, item creation takes place in the call chain of the mkdir(2) syscall in the driver subsystem. If we used an ioctl(2) to create / destroy objects from userspace, the special userspace program is able to fill out the structure to be passed into the ioctl and hence specify attributes such as local interface that are required at the time we set up the netpoll. For configfs, this information is not available at the time of mkdir(2). So, we keep all newly-created targets (via configfs) disabled by default. The user is expected to set various attributes appropriately (including the local network interface if required) and then write(2) "1" to the "enabled" attribute. Thus, netpoll_setup() is then called on the set parameters in the context of _this_ write(2) on the "enabled" attribute itself. This design enables the user to reconfigure existing netconsole targets at runtime to be attached to newly-come-up interfaces that may not have existed when netconsole was loaded or when the targets were actually created. All this effectively enables us to get rid of custom ioctls. (3) Ultra-paranoid configfs attribute show() and store() operations, with sanity and input range checking, using only safe string primitives, and compliant with the recommendations in Documentation/filesystems/sysfs.txt. (4) A new function netpoll_print_options() is created in the netpoll API, that just prints out the configured parameters for a netpoll structure. netpoll_parse_options() is modified to use that and it is also exported to be used from netconsole. Signed-off-by: Satyam Sharma <satyam@infradead.org> Acked-by: Keiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [MYRI10GE]: Use LRO.Andrew Gallatin2007-10-111-0/+1
| | | | | Singed off by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [EHEA]: Use LRO.Jan-Bernd Themann2007-10-111-0/+1
| | | | | Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Virtual ethernet device driver.Pavel Emelyanov2007-10-111-0/+6
| | | | | | | | | | | | | | | | | | | | | | Veth stands for Virtual ETHernet. It is a simple tunnel driver that works at the link layer and looks like a pair of ethernet devices interconnected with each other. Mainly it allows to communicate between network namespaces but it can be used as is as well. The newlink callback is organized that way to make it easy to create the peer device in the separate namespace when we have them in kernel. This implementation uses another interface - the RTM_NRELINK message introduced by Patric. Bug fixes from Daniel Lezcano. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* sk98lin: resurrect driverStephen Hemminger2007-09-161-1/+88
| | | | | | | | | This reverts commit e1abecc48938fbe1966ea6e78267fc673fa59295. The driver works on some hardware that skge doesn't handle yet. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Add some help texts to recently-introduced kconfig itemsJan Engelhardt2007-08-181-0/+15
| | | | | | Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PPPOL2TP]: Add CONFIG_INET Kconfig dependency.James Chapman2007-07-311-1/+1
| | | | | | | PPPOL2TP uses UDP so it obviously depends on CONFIG_INET. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Make NETDEVICES depend on NET.Jan Engelhardt2007-07-221-0/+1
| | | | | | | | | Enabling drivers from "Devices > Networking" (in menuconfig), for example SLIP and/or PLIP, throws link time errors when CONFIG_NET itself is =n. Have CONFIG_NETDEVICES depend on CONFIG_NET. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* Blackfin ethernet driver: on chip ethernet MAC controller driverBryan Wu2007-07-191-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements the driver necessary use the Analog Devices Blackfin processor's on-chip ethernet MAC controller. [try#2] - add timeout control - kill dma_config_reg bitfields - some trivial cleanup [try#3] - add endianess check - add DRV_NAME, DRV_VERSION... driver information string - add some comments for silicon anomaly and dma API confusion - some code trivial cleanup [try#4] - add Blackfin latest GPIO pin mux opertion with Michael Hennerich's help and Dan's review - rewrite the DMA descriptor list operation in a more readable way by Joe's review [try#5] - cleanup some coding style by Joe's review. [try#6] - 1.1 version fix a bug when set up multicast list pointed by Mr. yoshfuji - rearrange the desc_list_free function. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Michael Buesch <mb@bu3sch.de> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dcbw@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* xen: add virtual network device driverJeremy Fitzhardinge2007-07-181-0/+12
| | | | | | | | | | | | | | | | | | The network device frontend driver allows the kernel to access network devices exported exported by a virtual machine containing a physical network device driver. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Ian Pratt <ian.pratt@xensource.com> Cc: Christian Limpach <Christian.Limpach@cl.cam.ac.uk> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Keir Fraser <Keir.Fraser@cl.cam.ac.uk> Cc: netdev@vger.kernel.org
* Merge branch 'upstream-linus' of ↵Linus Torvalds2007-07-171-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (37 commits) forcedeth bug fix: realtek phy forcedeth bug fix: vitesse phy forcedeth bug fix: cicada phy atl1: reorder atl1_main functions atl1: fix excessively indented code atl1: cleanup atl1_main atl1: header file cleanup atl1: remove irq_sem cdc-subset to support new vendor/product ID 8139cp: implement the missing dev->tx_timeout myri10ge: Remove nonsensical limit in the tx done routine gianfar: kill unused header EP93XX_ETH must select MII macb: Add multicast capability macb: Use generic PHY layer s390: add barriers to qeth driver s390: scatter-gather for inbound traffic in qeth driver eHEA: Introducing support vor DLPAR memory add Fix a potential NULL pointer dereference in free_shared_mem() in drivers/net/s2io.c [PATCH] softmac: Fix ESSID problem ...
| * macb: Use generic PHY layerfrederic RODO2007-07-171-1/+1
| | | | | | | | | | | | | | | | | | Convert the macb driver to use the generic PHY layer in drivers/net/phy. Signed-off-by: Frederic RODO <f.rodo@til-technologies.fr> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds2007-07-161-16/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: splice: direct splicing updates ppos twice more ACSI removal umem: Fix match of pci_ids in umem driver umem: Remove references to dead CONFIG_MM_MAP_MEMORY variable remove the documentation for the legacy CDROM drivers
| * | more ACSI removalAdrian Bunk2007-07-161-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes some code that became dead code after the ATARI_ACSI removal. It also indirectly fixes the following bug introduced by commit c2bcf3b8978c291e1b7f6499475c8403a259d4d6: config ATARI_SLM tristate "Atari SLM laser printer support" - depends on ATARI && ATARI_ACSI!=n + depends on ATARI Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | | [SPARC64]: Add Sun LDOM virtual network driver.David S. Miller2007-07-161-0/+6
|/ / | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* | [NET]: Add macvlan driverPatrick McHardy2007-07-151-0/+10
| | | | | | | | | | | | | | | | Add macvlan driver, which allows to create virtual ethernet devices based on MAC address. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵Linus Torvalds2007-07-121-0/+21
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (183 commits) [TG3]: Update version to 3.78. [TG3]: Add missing NVRAM strapping. [TG3]: Enable auto MDI. [TG3]: Fix the polarity bit. [TG3]: Fix irq_sync race condition. [NET_SCHED]: ematch: module autoloading [TCP]: tcp probe wraparound handling and other changes [RTNETLINK]: rtnl_link: allow specifying initial device address [RTNETLINK]: rtnl_link API simplification [VLAN]: Fix MAC address handling [ETH]: Validate address in eth_mac_addr [NET]: Fix races in net_rx_action vs netpoll. [AF_UNIX]: Rewrite garbage collector, fixes race. [NETFILTER]: {ip, nf}_conntrack_sctp: fix remotely triggerable NULL ptr dereference (CVE-2007-2876) [NET]: Make all initialized struct seq_operations const. [UDP]: Fix length check. [IPV6]: Remove unneeded pointer idev from addrconf_cleanup(). [DECNET]: Another unnecessary net/tcp.h inclusion in net/dn.h [IPV6]: Make IPV6_{RECV,2292}RTHDR boolean options. [IPV6]: Do not send RH0 anymore. ... Fixed up trivial conflict in Documentation/feature-removal-schedule.txt manually. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | [CORE] Stack changes to add multiqueue hardware support APIPeter P Waskiewicz Jr2007-07-111-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the multiqueue hardware device support API to the core network stack. Allow drivers to allocate multiple queues and manage them at the netdev level if they choose to do so. Added a new field to sk_buff, namely queue_mapping, for drivers to know which tx_ring to select based on OS classification of the flow. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | [L2TP]: PPP over L2TP driver coreJames Chapman2007-07-111-0/+13
| |/ | | | | | | | | | | | | | | | | | | | | | | This driver handles only L2TP data frames; control frames are handled by a userspace application. It implements L2TP using the PPPoX socket family. There is a PPPoX socket for each L2TP session in an L2TP tunnel. PPP data within each session is passed through the kernel's PPP subsystem via this driver. Kernel parameters of each socket can be read or modified using ioctl() or [gs]etsockopt() calls. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* / Blackfin arch: Port the dm9000 driver to Blackfin by using the correct ↵Alex Landau2007-07-121-1/+1
|/ | | | | | | | low-level io routines Signed-off-by: Alex Landau <landau.alex@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* Merge branch 'upstream-linus' of ↵Linus Torvalds2007-07-101-87/+29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits) bonding/bond_main.c: make 2 functions static ps3: gigabit ethernet driver for PS3, take3 [netdrvr] Fix dependencies for ax88796 ne2k clone driver eHEA: Capability flag for DLPAR support Remove sk98lin ethernet driver. sunhme.c:quattro_pci_find() must be __devinit bonding / ipv6: no addrconf for slaves separately from master atl1: remove write-only var in tx handler macmace: use "unsigned long flags;" Cleanup usbnet_probe() return value handling netxen: deinline and sparse fix eeprom_93cx6: shorten pulse timing to match spec (bis) phylib: Add Marvell 88E1112 phy id phylib: cleanup marvell.c a bit AX88796 network driver IOC3: Switch to pci refcounting safe APIs e100: Fix Tyan motherboard e100 not receiving IPMI commands QE Ethernet driver writes to wrong register to mask interrupts rrunner.c:rr_init() must be __devinit tokenring/3c359.c:xl_init() must be __devinit ...
| * ps3: gigabit ethernet driver for PS3, take3Masakazu Mokuno2007-07-101-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hi, This is the third submission of the network driver for PS3. The differences from the previous one are: - renamed source file names so that their prefix can match with the module name - added cbe-oss-dev@ozlabs.org line for MAINTAINER file - changed some in copyright comments If there are no more comments, please apply for 2.6.23. Thank you -- Subject: PS3: Ethernet driver From: Masakazu Mokuno <mokuno@sm.sony.co.jp> Add Gigabit Ethernet support for the PS3 game console. The module will be called ps3_gelic. CC: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [netdrvr] Fix dependencies for ax88796 ne2k clone driverJeff Garzik2007-07-101-0/+1
| | | | | | | | | | | | It needs writesb(), not available on all platforms. Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * Remove sk98lin ethernet driver.Jeff Garzik2007-07-101-88/+1
| | | | | | | | | | | | | | | | Unmaintained, superceded by skge. Prodded to deletion by Adrian Bunk. Acked by Stephen Hemminger. Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * AX88796 network driverBen Dooks2007-07-101-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Support for the Asix AX88796 network controller, an NE2000 compatible 10/100 ethernet device with internal PHY. The driver supports PHY settings via either ioctl() or the ethtool driver ops. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * sky2: unmark as EXPERIMENTALStephen Hemminger2007-07-101-1/+1
| | | | | | | | | | Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * sky2: debug interfaceStephen Hemminger2007-07-101-0/+10
| | | | | | | | | | | | | | | | Add an optional debug interface for displaying state of transmit/receive rings. Creates a file debugfs/sky2/ethX for each device that is up. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | [MIPS] Delete Ocelot 3 support.Ralf Baechle2007-07-101-1/+1
| | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] Removes the few leftovers of the MOMENCO_JAGUAR_ATX removal.Adrian Bunk2007-07-101-1/+1
| | | | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | [MIPS] Remove Momenco Ocelot C supportFranck Bui-Huu2007-07-101-1/+1
|/ | | | | | | | | | | | | | | | | | | Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/configs/ocelot_c_defconfig delete mode 100644 arch/mips/momentum/ocelot_c/Makefile delete mode 100644 arch/mips/momentum/ocelot_c/cpci-irq.c delete mode 100644 arch/mips/momentum/ocelot_c/dbg_io.c delete mode 100644 arch/mips/momentum/ocelot_c/irq.c delete mode 100644 arch/mips/momentum/ocelot_c/ocelot_c_fpga.h delete mode 100644 arch/mips/momentum/ocelot_c/platform.c delete mode 100644 arch/mips/momentum/ocelot_c/prom.c delete mode 100644 arch/mips/momentum/ocelot_c/reset.c delete mode 100644 arch/mips/momentum/ocelot_c/setup.c delete mode 100644 arch/mips/momentum/ocelot_c/uart-irq.c delete mode 100644 arch/mips/pci/fixup-ocelot-c.c delete mode 100644 arch/mips/pci/pci-ocelot-c.c
* Ethernet driver for EISA only SNI RM200/RM400 machinesThomas Bogendoerfer2007-07-091-0/+7
| | | | | | | | | | | | | Changes to last version: - spelling fix - cleaned up probe code Thomas. Ethernet driver for EISA only SNI RM200/RM400 machines Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Use menuconfig objects II - netdev (general+100mbit)Jan Engelhardt2007-07-091-85/+80
| | | | | | | | | | | | | | | CONFIG_NETDEVICES, CONFIG_NET_ETHERNET: Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. CONFIG_SMC9194: Move it so that it appears correctly in menuconfig. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [POWERPC] Disable old EMAC driver in arch/powerpcDavid Gibson2007-07-021-1/+1
| | | | | | | | | | | | The EMAC driver, in drivers/net/ibm_emac, for the embedded Ethernet MAC found in PowerPC 4xx embedded chips is not suitable for arch/powerpc. It will not build because it relies on the old arch/ppc OCP mechanism. BenH has a new, device-tree aware version of the driver which will work in arch/powerpc, but until it's merged, this patch will disable the old, non-building version. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Add select PHYLIB to the UCC_GETH Kconfig optionJan Altenberg2007-06-011-0/+1
| | | | | | | | | | ucc_geth has been migrated to use the common phylib code. So lets add a 'select PHYLIB' to the UCC_GETH Kconfig entry. Signed-off-by: Jan Altenberg <jan.altenberg@linutronix.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for_paulus' of ↵Linus Torvalds2007-05-291-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc * 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: [POWERPC] Fix Kconfig warning [PPC] Fix modpost warning [POWERPC] Fix modpost warning [POWERPC] Fix Section mismatch warnings [POWERPC] QE: fix Kconfig 'select' warning with UCC_FAST [POWERPC] 52xx: unbreak lite5200 dts (_pic vs. -pic) [PPC] Remove duplicate export of __div64_32. [PPC] Fix COMMON symbol warnings
| * [POWERPC] QE: fix Kconfig 'select' warning with UCC_FASTTimur Tabi2007-05-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | The UCC_GETH Kconfig option in drivers/net/Kconfig had a line to select the UCC_FAST option is arch/powerpc/sysdev/qe_lib/Kconfig, which is only used on PowerPC builds. On other architectures, this would generated a warning. The fix is to have UCC_FAST depend on UCC_GETH. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | remove unnecessary dependency on VIA velocity configYoichi Yuasa2007-05-241-1/+1
|/ | | | | | | | | | | Hi, This patch has removed unnecessary dependency on VIA velocity config. Yoichi Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2007-05-151-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB/cm: Optimize stale connection detection IB/mthca: Set cleaned CQEs back to HW ownership when cleaning CQ IB/mthca: Fix posting >255 recv WRs for Tavor RDMA/cma: Add check to validate that cm_id is bound to a device RDMA/cma: Fix synchronization with device removal in cma_iw_handler RDMA/cma: Simplify device removal handling code IB/ehca: Disable scaling code by default, bump version number IB/ehca: Beautify sysfs attribute code and fix compiler warnings IB/ehca: Remove _irqsave, move #ifdef IB/ehca: Fix AQP0/1 QP number IB/ehca: Correctly set GRH mask bit in ehca_modify_qp() IB/ehca: Serialize hypervisor calls in ehca_register_mr() IB/ipath: Shadow the gpio_mask register IB/mlx4: Fix uninitialized spinlock for 32-bit archs mlx4_core: Remove unused doorbell_lock net: Trivial MLX4_DEBUG dependency fix.
| * net: Trivial MLX4_DEBUG dependency fix.Paul Mundt2007-05-131-0/+1
| | | | | | | | | | | | | | | | CONFIG_MLX4_DEBUG works out to a def_bool y for those that have CONFIG_EMBEDDED set. Make it depend on MLX4_CORE. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 11:23:59 +0100