summaryrefslogtreecommitdiffstats
path: root/drivers/net/Kconfig (follow)
Commit message (Collapse)AuthorAgeFilesLines
* IBMLANA no longer has to depend on MCA_LEGACYAdrian Bunk2008-02-031-1/+1
| | | | | | | | | This patch removes the no longer required dependency of IBMLANA on MCA_LEGACY. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'linux-2.6'Paul Mackerras2008-01-311-19/+68
|\
| * [net] Gracefully handle shared e1000/1000e driver PCI ID'sLinus Torvalds2008-01-301-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both the old e1000 driver and the new e1000e driver can drive some PCI-Express e1000 cards, and we should avoid ambiguity about which driver will pick up the support for those cards when both drivers are enabled. This solves the problem by having the old driver support those cards if the new driver isn't configured, but otherwise ceding support for PCI Express versions of the e1000 chipset to the newer driver. Thus allowing both legacy configurations where only the old driver is active (and handles all chips it knows about) and the new configuration with the new driver handling the more modern PCIE variants. Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * Mostly revert "e1000/e1000e: Move PCI-Express device IDs over to e1000e"Linus Torvalds2008-01-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The new e1000e driver is apparently not yet suitable for general use, so mark it experimental, and re-instate all the PCI-Express device IDs in the old and stable e1000 driver so that people (namely me) can continue to use a driver that actually works. Auke & co have been appraised of the situation. Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * igb: PCI-Express 82575 Gigabit Ethernet driverAuke Kok2008-01-291-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are pleased to announce a new Gigabit Ethernet product and its driver to the linux community. This product is the Intel(R) 82575 Gigabit Ethernet adapter family. Physical adapters will be available to the public soon. These adapters come in 2- and 4-port versions (copper PHY) currently. Other variants will be available later. The 82575 chipset supports significantly different features that warrant a new driver. The descriptor format is (just like the ixgbe driver) different. The device can use multiple MSI-X vectors and multiple queues for both send and receive. This allows us to optimize some of the driver code specifically as well compared to the e1000-supported devices. This version of the igb driver no lnger uses fake netdevices and incorporates napi_struct members for each ring to do the multi- queue polling. multi-queue is enabled by default and the driver supports NAPI mode only. All the namespace collisions should be gone in this version too. The register macro's have been condensed to improve readability. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * add driver for enc28j60 ethernet chipClaudio Lanconelli2008-01-291-0/+18
| | | | | | | | | | Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * SGISEEQ: use cached memory access to make driver work on IP28Thomas Bogendoerfer2008-01-291-1/+1
| | | | | | | | | | | | | | | | | | - Use inline functions for dma_sync_* instead of macros - added Kconfig change to make selection for similair SGI boxes easier Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * bnx2x depends on ZLIB_INFLATELee Schermerhorn2008-01-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bnx2x module depends on the zlib_inflate functions. The build will fail if ZLIB_INFLATE has not been selected manually or by building another module that automatically selects it. Modify BNX2X config option to 'select ZLIB_INFLATE' like BNX2 and others. This seems to fix it. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Eliezer Tamir <eliezert@broadcom.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * pasemi_mac: Software-based LRO supportOlof Johansson2008-01-291-0/+1
| | | | | | | | | | | | | | | | | | pasemi_mac: Software-based LRO support Implement LRO for pasemi_mac. Pretty straightforward. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * add bnx2x driver for BCM57710Eliezer Tamir2008-01-291-0/+9
| | | | | | | | | | Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NET]: Add support for the RDC R6040 Fast Ethernet controllerSten Wang2008-01-291-0/+12
| | | | | | | | | | | | | | | | | | This patch adds support for the RDC R6040 MAC we can find in the RDC R-321x System-on-chips. Signed-off-by: Sten Wang <sten.wang@rdc.com.tw> Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
| * [SHAPER]: The scheduled shaper removal.Adrian Bunk2008-01-291-17/+0
| | | | | | | | | | | | | | | | This patch contains the scheduled removal of the shaper driver. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [ARM] 4764/1: [AT91] AT91CAP9 core supportAndrew Victor2008-01-261-1/+1
| | | | | | | | | | | | | | | | | | Add support for Atmel's AT91CAP9 Customizable Microcontroller family. <http://www.atmel.com/products/AT91CAP/Default.asp> Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [POWERPC] 85xx: rework platform KconfigKumar Gala2008-01-281-1/+1
|/ | | | | | | | | | * Allow multiple boards to be selected in a single build * Removed Kconfig option '85xx' which existed only for compat with arch/ppc * Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds all 85xx boards except sbc8560 and stx_gp3 since these to boards have board specific ifdef in driver code that may break all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Fix file references in documentation and KconfigJohann Felix Soden2008-01-221-3/+0
| | | | | | | | | | | | | | Fix typo in arch/powerpc/boot/flatdevtree_env.h. There is no Documentation/networking/ixgbe.txt. README.cycladesZ is now in Documentation/. wavelan.p.h is now in drivers/net/wireless/. HFS.txt is now Documentation/filesystems/hfs.txt. OSS-files are now in sound/oss/. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* e1000e Kconfig: remove ref to nonexistant docsJason Uhlenkott2008-01-181-3/+0
| | | | | | | | There is no Documentation/networking/e1000e.txt. Signed-off-by: Jason Uhlenkott <jasonuhl@jasonuhl.org> Cc: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ip1000: menu location changeStephen Hemminger2008-01-121-10/+10
| | | | | | | | | Move the ip1000 driver into the expected place for gigabit cards in the configuration menu structure. It should be under the gigabit cards, not at the top level. Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Revert "make bnx2x select ZLIB_INFLATE"Linus Torvalds2007-12-121-1/+0
| | | | | | | | | | | | This reverts commit 70eba18b5664f90d7620905e005b89388e5fd94b, as per Jeff Garzik: "That was meant for 2.6.25, and actually (due to patching) applied to a completely unrelated 2.6.24 net driver." Noted-by: Roland Dreier <rdreier@cisco.com> Requested-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* make bnx2x select ZLIB_INFLATEEliezer Tamir2007-12-071-0/+1
| | | | | | | | | | | | | The bnx2x module depends on the zlib_inflate functions. The build will fail if ZLIB_INFLATE has not been selected manually or by building another module that automatically selects it. Modify BNX2X config option to 'select ZLIB_INFLATE' like BNX2 and others. This seems to fix it. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* net: smc911x: only enable for mpr2 on sh.Paul Mundt2007-12-011-1/+1
| | | | | | | | | | | | | | The smc911x.h is a bit of a mess, not supporting any sort of generic configuration. For the moment only ARCH_PXA and SH_MAGIC_PANEL_R2 have suitable definitions, so we reflect this in the Kconfig also. While there are other SH boards that will likely turn this on in the 2.6.25 time frame, it's not worth trying to stub around at the moment. Fixes up the allmodconfig build, as noted by akpm. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Blackfin SMC91x Driver: punt CONFIG_BFIN -- we already have CONFIG_BLACKFINMike Frysinger2007-11-241-1/+1
| | | | | | Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [NET]: Remove references to net-modules.txt.Adrian Bunk2007-11-131-130/+69
| | | | | | | | | When I removed net-modules.txt because it only contained ancient information I missed that many Kconfig entries pointed to this ancient information. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ax88796: add superh to kconfig dependenciesMagnus Damm2007-11-101-1/+1
| | | | | | | | | ax88796: add superh to kconfig dependencies This patch adds sh architecture support to the ax88796 kconfig. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [VETH]: Clarify "virtual ethernet device" to "virtual ethernet pair device".Rusty Russell2007-11-071-3/+4
| | | | | | | | It'd also be nice to mention "containers" somewhere in the help text (I'm assuming that's what it's for?). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* mpc5200: Fix Kconfig dependancies on MPC5200 FEC device driverGrant Likely2007-11-011-3/+1
| | | | | | | | | | | | | | | When not building an arch/powerpc kernel, the mpc5200 FEC driver depends on some symbols which are not defined (BESTCOMM & BESTCOMM_FEC). This patch flips around the dependancy logic so that it cannot be selected unless BESTCOMM_FEC is selected first. Kconfig stops complaining this way. Also, the driver only works for arch/powerpc (not arch/ppc) anyway so it should depend on PPC_MERGE also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* FEC - fast ethernet controller for mpc52xxDomen Puncer2007-10-291-0/+24
| | | | | | | | Driver for ethernet on mpc5200/mpc5200b SoCs (FEC). Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ipg: Kconfig whitepaces/tab damagesFrancois Romieu2007-10-281-6/+6
| | | | | | | Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Avuton Olrich <avuton@gmail.com> Cc: Jesse Huang <jesse@icplus.com.tw> Cc: Sorbica Shieh <sorbica@icplus.com.tw>
* ipg: missing Kconfig dependencyFrancois Romieu2007-10-281-0/+1
| | | | | | | | | | | | | | | | | | | Fix for the error below while linking vmlinux: [...] drivers/built-in.o: In function `ipg_ioctl': drivers/net/ipg.c:2148: undefined reference to `generic_mii_ioctl' drivers/built-in.o: In function `ipg_get_settings': drivers/net/ipg.c:2181: undefined reference to `mii_ethtool_gset' drivers/built-in.o: In function `ipg_set_settings': drivers/net/ipg.c:2193: undefined reference to `mii_ethtool_sset' drivers/built-in.o: In function `ipg_nway_reset': drivers/net/ipg.c:2205: undefined reference to `mii_nway_restart' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Avuton Olrich <avuton@gmail.com> Cc: Jesse Huang <jesse@icplus.com.tw> Cc: Sorbica Shieh <sorbica@icplus.com.tw>
* Merge branch 'features' of git://farnsworth.org/dale/linux-2.6-mv643xx_eth ↵Jeff Garzik2007-10-241-5/+8
|\ | | | | | | into upstream
| * mv643xx_eth: Enable use on Orion platformsLennert Buytenhek2007-10-231-5/+8
| | | | | | | | | | | | | | | | Allow Orion ARM platforms to use the mv643xx_eth driver. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
* | Net driver using virtioRusty Russell2007-10-231-0/+6
|/ | | | | | | | | | | | | | | | The network driver uses two virtqueues: one for input packets and one for output packets. This has nice locking properties (ie. we don't do any for recv vs send). TODO: 1) Big packets. 2) Multi-client devices (maybe separate driver?). 3) Resolve freeing of old xmit skbs (Christian Borntraeger) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: netdev@vger.kernel.org
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2007-10-201-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (74 commits) fix do_sys_open() prototype sysfs: trivial: fix sysfs_create_file kerneldoc spelling mistake Documentation: Fix typo in SubmitChecklist. Typo: depricated -> deprecated Add missing profile=kvm option to Documentation/kernel-parameters.txt fix typo about TBI in e1000 comment proc.txt: Add /proc/stat field small documentation fixes Fix compiler warning in smount example program from sharedsubtree.txt docs/sysfs: add missing word to sysfs attribute explanation documentation/ext3: grammar fixes Documentation/java.txt: typo and grammar fixes Documentation/filesystems/vfs.txt: typo fix include/asm-*/system.h: remove unused set_rmb(), set_wmb() macros trivial copy_data_pages() tidy up Fix typo in arch/x86/kernel/tsc_32.c file link fix for Pegasus USB net driver help remove unused return within void return function Typo fixes retrun -> return x86 hpet.h: remove broken links ...
| * typo fixesMatt LaPlante2007-10-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* | ir-functions.c:(.text+0xbce18): undefined reference to `input_event'Randy Dunlap2007-10-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [bugme-daemon@bugzilla.kernel.org wrote:] From: Randy Dunlap <randy.dunlap@oracle.com> Drivers that use lro functions should depend on INET, otherwise they may not link correctly. Let's not select INET. Select should be used only for library-like code, not to enable subsystems. ERROR: "lro_flush_all" [drivers/net/myri10ge/myri10ge.ko] undefined! ERROR: "lro_receive_frags" [drivers/net/myri10ge/myri10ge.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | NAPI: kconfig prompt and deleted doc fileRandy Dunlap2007-10-201-32/+5
|/ | | | | | | | | | | - make the kconfig NAPI option prompt consistent across all net drivers (other than EXPERIMENTAL; can it now be removed also, or is the new napi_struct implementation now EXPERIMENTAL ?) - remove comment about the now-deleted NAPI_HOWTO.txt file - clean up typos in Tulip NAPI & Interrupt Mitigation Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* skge: add a debug interfaceStephen Hemminger2007-10-171-0/+10
| | | | | | | Add a debugfs interface to look at internal ring state. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* AR7 ethernetMatteo Croce2007-10-151-0/+9
| | | | | | | | | New version which uses less locking and drops old API Signed-off-by: Matteo Croce <technoboy85@gmail.com> Signed-off-by: Eugene Konev <ejka@imfi.kspu.ru> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [NIU]: Add Sun Neptune ethernet driver.David S. Miller2007-10-111-0/+7
| | | | | | | With cleanup suggestions and bugs spotted by Stephen Hemminger, Ingo Oeser, Matheos Worku, and Oliver Hartkopp. Signed-off-by: David S. Miller <davem@davemloft.net>
* smc911x irq sense request and MPR2 board supportMarkus Brunner2007-10-111-1/+1
| | | | | | | | | | | | | | | | | | | Hi, this are the changes to the smc911x driver, which were necessary to get it running on the Magic Panel R2 (smsc9115). It is a SH3-DSP based board. The other patches are available on the linuxsh-dev mailinglist. http://marc.info/?l=linuxsh-dev&r=1&b=200708&w=2 It was necessary to set the irq sense to low level. Therefor the SMC_IRQ_SENSE define was added. How are the chances for inclusion in 2.6.24? Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ax88796: add 93cx6 eeprom supportMagnus Damm2007-10-111-0/+7
| | | | | | | | | | | | | | | Hook up the 93cx6 eeprom code to the ax88796 driver and modify the ax88796 driver to read out the mac address from the eeprom. We need this for the ax88796 on certain SuperH boards. The pin configuration used to connect the eeprom to the ax88796 on these boards is the same as pointed out by the ax88796 datasheet, so we can probably reuse this code for multiple platforms in the future. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sb1250-mac: Driver model & phylib updateMaciej W. Rozycki2007-10-111-0/+1
| | | | | | | | | | | | | | | | | A driver model and phylib update. It includes the following changes: 1. Removal of unused module options. 2. Phylib support and the resulting removal of generic bits for handling the PHY. 3. Proper reserving of device resources and using ioremap()ped handles to access MAC registers rather than platform-specific macros. 4. Handling of the device using the driver model. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* dgrs: remove from build, config, and maintainer listNathanael Nerode2007-10-111-15/+0
| | | | | | | | | | | | | | | | | | | | | | | Stop building and configuring driver for Digi RightSwitch, which was never actually sold to anyone, and remove it from MAINTAINERS. In response to an investigation into the firmware of the "Digi Rightswitch" driver, Andres Salomon discovered: > > Dear Andres: > > After further research, we found that this product was killed in place > and never reached the market. We would like to request that this not be > included. Since the product never reached market, clearly nobody is using this orphaned driver. Signed-off-by: Nathanael Nerode <neroden@gcc.gnu.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NET_SB1250_MAC: Rename to SB1250_MACMaciej W. Rozycki2007-10-111-1/+1
| | | | | | | Rename NET_SB1250_MAC to SB1250_MAC to follow the convention. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* NET_SB1250_MAC: Update Kconfig entryMaciej W. Rozycki2007-10-111-4/+12
| | | | | | | | The SB1250 network interfaces are Gigabit Ethernet ones. Move the Kconfig entry to the appropriate section and add some help text. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Device tree aware EMAC driverDavid Gibson2007-10-111-69/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Based on BenH's earlier work, this is a new version of the EMAC driver for the built-in ethernet found on PowerPC 4xx embedded CPUs. The same ASIC is also found in the Axon bridge chip. This new version is designed to work in the arch/powerpc tree, using the device tree to probe the device, rather than the old and ugly arch/ppc OCP layer. This driver is designed to sit alongside the old driver (that lies in drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The old driver is left in place to support arch/ppc until arch/ppc itself reaches its final demise (not too long now, with luck). This driver still has a number of things that could do with cleaning up, but I think they can be fixed up after merging. Specifically: - Should be adjusted to properly use the dma mapping API. Axon needs this. - Probe logic needs reworking, in conjuction with the general probing code for of_platform devices. The dependencies here between EMAC, MAL, ZMII etc. make this complicated. At present, it usually works, because we initialize and register the sub-drivers before the EMAC driver itself, and (being in driver code) runs after the devices themselves have been instantiated from the device tree. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Blackfin EMAC driver: add a select for the PHYLIB of this driverBryan Wu2007-10-111-0/+2
| | | | | | | | Since we are adding requirement for the PHYLIB for this driver, there should be a select for that Cc: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [B44]: port to native ssb supportMichael Buesch2007-10-111-4/+24
| | | | | Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [NET]: Add Tehuti network driver.Andy Gospodarek2007-10-111-0/+6
| | | | | | [ Ported to napi_struct changes... -DaveM ] Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPG]: add IP1000A driver to kernel treeFrancois Romieu2007-10-111-0/+9
| | | | | | | | Signed-off-by: Jesse Huang <jesse@icplus.com.tw> Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: driver for Intel(R) 82598 PCI-Express 10GbE adapters (v4)Auke Kok2007-10-111-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Intel 82598 PCI-Express 10GbE chipset. Devices will be available on the market soon. This version of the driver is largely the same as the last release: * Driver uses a single RX and single TX queue, each using 1 MSI-X irq vector. * Driver runs in NAPI mode only * Driver is largely multiqueue-ready (TM) Changes since 20070803: * removed wrappers for hardware functions * incorporated e1000e-style HW api reorganization code * sparse/checkpatch cleanups, namespace cleanups * driver prints out extra debugging information at load time identifying adapter board number, mac, phy types * removed ixgbe_api.c, ixgbe_api.h, ixgbe_osdep.h * driver update to 1.1.18 * removed ixgbe.txt which contained no useful info anymore [ Integrated napi_struct changes from Auke as well... -DaveM ] Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 20:55:08 +0100