summaryrefslogtreecommitdiffstats
path: root/drivers/net/arcnet/com20020.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* arcnet: com20020: remove needless base_addr assignmentMichael Grzeschik2017-06-291-2/+0
| | | | | | | The assignment is superfluous. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* arcnet: com20020: add enable and disable device on open/closeMichael Grzeschik2015-10-261-10/+29
| | | | | | | | | This patch changes the driver to properly work with the linux netif interface. The controller gets enabled on open and disabled on close. Therefor it removes every bogus start of the xceiver. It only gets enabled on com20020_open and disabled on com20020_close. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: com20020: replace magic numbers with readable macrosMichael Grzeschik2015-09-231-8/+9
| | | | | | | | This patch replaces all magic numbers in the driver with proper named macros. For the case of XTOcfg and STARTIOcmd it introduces the new macros. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: com20020: Use arcnet_<I/O> routinesJoe Perches2015-09-231-46/+57
| | | | | | | | | | | | | | | | | | | | | | | | Simplify and make consistent the current uses of inb/outb by using the newly introduced arcnet_<I/O> equivalents. o Add new #defines for register offsets There is an register offset, 8, that is unnamed and used as-is. o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate o Create static inline com20020_set_subaddress for the SET_SUBADR macro There is an unused arcnet config entry CONFIGSA100_CT6001 which added a special #define BUS_ALIGN which was introduced but never used in fullhist git tree commit 22cfce4b82b0 ("[ARCNET]: Fixes.") in Nov 2004 for Linux v2.6.10. This BUS_ALIGN #define tries to allow 8 bit devices to work on a 16 bit bus by aligning addresses to 16 bit boundaries. Move this currently unused CONFIG_SA1100_CT6001 BUS_ALIGN macro from com20020.h to arcdevice.h. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: Make a char * array const char * constJoe Perches2015-09-231-5/+10
| | | | | | | | | Might as well be specific about the use of this array. Add a commment questioning the indexing too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: Move files out of include/linuxJoe Perches2015-09-231-3/+3
| | | | | | | | | | | | | These #include files don't need to be in the include/linux directory as they can be local to drivers/net/arcnet/ Move them and update the #include statements. Update the MAINTAINERS file pattern by deleting arcdevice from the NETWORKING block as arcnet is currently unmaintained. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: Wrap some long linesJoe Perches2015-09-231-6/+8
| | | | | | | Just neatening. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: Remove assignments from ifsJoe Perches2015-09-231-1/+2
| | | | | | | Move the assignment above the if like general kernel style. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: Convert printk to pr_<level>Joe Perches2015-09-231-3/+4
| | | | | | | | | | Use the more current logging style. Remove #define VERSION, use pr_info normally. Add pr_fmt with "arcnet:" prefixes and KBUILD_MODNAME. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: Convert BUGMSG and BUGMSG2 to arc_prink and arc_contJoe Perches2015-09-231-31/+33
| | | | | | | | | | These macros don't actually represent BUG uses but are more commonly used as logging macros, so use a more kernel style macro. Convert the BUGMSG from a netdev_ like use to actually use netdev_<level>. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: Expand odd BUGLVL macro with if and usesJoe Perches2015-09-231-1/+2
| | | | | | | | | Don't hide what should be obvious. Make the macro a simple test instead of using if and test. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: Use network block comment styleJoe Perches2015-09-231-2/+1
| | | | | | | Conformity can be useful. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: Use include/linux path for asmJoe Perches2015-09-231-1/+1
| | | | | | | Use the preferred kernel include path for asm paths. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: Use normal kernel brace styleJoe Perches2015-09-231-8/+7
| | | | | | | | Move braces normal kernel locations. Add missing braces. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: Add and remove blank linesJoe Perches2015-09-231-6/+2
| | | | | | | Use a more current kernel line style. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* arcnet: Use normal kernel spacing styleJoe Perches2015-09-231-19/+19
| | | | | | | | | | Standardized spacing is easier to read. git diff -w shows no differences. objdiff shows no differences. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
* ARCNET: add com20020_set_hwddr to change addressMichael Grzeschik2014-09-291-0/+14
| | | | | | | | This patch adds com20020_set_hwaddr to make it possible to change the hwaddr on runtime. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: remove use of ndo_set_multicast_list in driversJiri Pirko2011-08-181-1/+1
| | | | | | | replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: remove interrupt.h inclusion from netdevice.hAlexey Dobriyan2011-06-071-0/+1
| | | | | | | | * remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* drivers/net: request_irq - Remove unnecessary leading & from second argJoe Perches2009-11-191-1/+1
| | | | | | | | | | | | Not as fancy as coccinelle. Checkpatch errors ignored. Compile tested allyesconfig x86, not all files compiled. grep -rPl --include=*.[ch] "\brequest_irq\s*\([^,\)]+,\s*\&" drivers/net | while read file ; do \ perl -i -e 'local $/; while (<>) { s@(\brequest_irq\s*\([^,\)]+,\s*)\&@\1@g ; print ; }' $file ;\ done Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* com0020: Add missing symbol export for com20020_netdev_ops.David S. Miller2009-01-261-0/+1
| | | | | | Thanks to Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
* com20020: convert to net_devic_opsStephen Hemminger2009-01-211-2/+8
| | | | | Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdevice: safe convert to netdev_priv() #part-1Wang Chen2008-11-131-5/+5
| | | | | | | | | | | | | | | | | | We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net: replace __FUNCTION__ with __func__Harvey Harrison2008-09-251-8/+8
| | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* /drivers/net/arcnet/com20020.c replaced init_module&cleanup_module with ↵Jon Schindler2008-03-171-3/+4
| | | | | | | | | module_init&module_exit Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* bugfixes and new hardware support for arcnet driverJeff Morrow2007-02-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The modifications and bug fixes noted below were done by Realtime Control Works and Contemporary Control Systems, Inc, Jan 2005. They were incorporated into the 2.6 kernel by Jeff Morrow of Sierra Analytics, Feb 2007. <jmorrow@massspec.com> The changes have been tested on a Contemporary Controls PCI20U-4000. Summary of changes: Arc-rawmode.c: rx(): - Fixed error in received packet lengths; 256 byte packets were being received as 257 bytes packets. prepare_tx(): - Fixed error in transmit length calcs; 257 byte packets were being transmitted as 260 byte packets. com20020.c: com20020_check(): - We now load the SETUP2 register if the 'clockm' parameter is non-zero, instead of checking for ARC_CAN_10MBIT. The user is now responsible for whether or not SETUP2 is loaded. If the clock multiplier is non-zero, this means that the user wants a baud rate greater than 2.5Mbps. This is not possible unless the SETUP2 register is present (COM20020D, or COM20022). So, we're relying on the user to be smart about what kind of chip he's dealing with... com20020-pci.c - Added several entries to com20020pci_id_table[]. Signed-off-by: Jeff Morrow <jmorrow@massspec.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] com20020 build fixRandy Dunlap2007-02-121-1/+2
| | | | | | | | | | | | | | | Need to export com20020 symbols for com20020_cs also. WARNING: "com20020_found" [drivers/net/pcmcia/com20020_cs.ko] undefined! WARNING: "com20020_check" [drivers/net/pcmcia/com20020_cs.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Esben Nielsen <nielsen.esben@googlemail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] com20020 build fixRandy Dunlap2006-11-101-2/+5
| | | | | | | | | | | | | com20020.c needs to export functions if either of the ISA or PCI modules are built as loadable modules. Or they could always be exported. WARNING: "com20020_found" [drivers/net/arcnet/com20020-pci.ko] undefined! WARNING: "com20020_check" [drivers/net/arcnet/com20020-pci.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Toralf Forster <toralf.foerster@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-171-0/+357
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!