summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/microchip/ksz8795_reg.h (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net: dsa: microchip: implement PHY loopback configuration for KSZ8794 and ↵Oleksij Rempel2024-01-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | KSZ8873 Correct the PHY loopback bit handling in the ksz8_w_phy_bmcr and ksz8_r_phy_bmcr functions for KSZ8794 and KSZ8873 variants in the ksz8795 driver. Previously, the code erroneously used Bit 7 of port register 0xD for both chip variants, which is actually for LED configuration. This update ensures the correct registers and bits are used for the PHY loopback feature: - For KSZ8794: Use 0xF / Bit 7. - For KSZ8873: Use 0xD / Bit 0. The lack of loopback support was seen on KSZ8873 system by using "ethtool -t lanX". After this patch, the ethtool selftest will work, but only if port is not part of a bridge. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://lore.kernel.org/r/20240124123314.734815-4-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: microchip: add property to select internal RMII reference clockAnte Knezic2023-12-071-0/+3
| | | | | | | | | | | | | | | | | | Microchip KSZ8863/KSZ8873 have the ability to select between internal and external RMII reference clock. By default, reference clock needs to be provided via REFCLKI_3 pin. If required, device can be setup to provide RMII clock internally so that REFCLKI_3 pin can be left unconnected. Add a new "microchip,rmii-clk-internal" property which will set RMII clock reference to internal. If property is not set, reference clock needs to be provided externally. While at it, move the ksz8795_cpu_interface_select() to ksz8_config_cpu_port() to get a cleaner call path for cpu port. Signed-off-by: Ante Knezic <ante.knezic@helmholz.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: move REG_SW_MAC_ADDR to dev->info->regs[]Vladimir Oltean2023-10-031-7/+0
| | | | | | | | | | | | | | | | | | | Defining macros which have the same name but different values is bad practice, because it makes it hard to avoid code duplication. The same code does different things, depending on the file it's placed in. Case in point, we want to access REG_SW_MAC_ADDR from ksz_common.c, but currently we can't, because we don't know which kszXXXX_reg.h to include from the common code. Remove the REG_SW_MAC_ADDR_{0..5} macros from ksz8795_reg.h and ksz9477_reg.h, and re-add this register offset to the dev->info->regs[] array. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: dsa: microchip: Add drive strength configurationOleksij Rempel2023-09-161-14/+0
| | | | | | | | | | | | | | Add device tree based drive strength configuration support. It is needed to pass EMI validation on our hardware. Configuration values are based on the vendor's reference driver. Tested on KSZ9563R. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: ksz8: add MTU configuration supportOleksij Rempel2022-12-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | Make MTU configurable on KSZ87xx and KSZ88xx series of switches. Before this patch, pre-configured behavior was different on different switch series, due to opposite meaning of the same bit: - KSZ87xx: Reg 4, Bit 1 - if 1, max frame size is 1532; if 0 - 1514 - KSZ88xx: Reg 4, Bit 1 - if 1, max frame size is 1514; if 0 - 1532 Since the code was telling "... SW_LEGAL_PACKET_DISABLE, true)", I assume, the idea was to set max frame size to 1532. With this patch, by setting MTU size 1500, both switch series will be configured to the 1532 frame limit. This patch was tested on KSZ8873. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: dsa: microchip: ksz8795: use common xmii functionArun Ramadoss2022-07-271-8/+0
| | | | | | | | This patch updates the ksz8795 cpu configuration to use the ksz common xmii set functions. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: add P_STP_CTRL to ksz_chip_regArun Ramadoss2022-06-291-1/+0
| | | | | | | | This patch moves the stp_ctrl_reg from the ksz_chip_data to ksz_chip_reg structure. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: move start of switch to ksz_setupArun Ramadoss2022-06-241-1/+0
| | | | | | | | This patch move the setting the start bit from the individual switch configuration to ksz_setup Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: move multicast enable to ksz_setupArun Ramadoss2022-06-241-1/+0
| | | | | | | | This patch moves the enabling the multicast storm protection from individual setup function to ksz_setup function. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: move broadcast rate limit to ksz_setupArun Ramadoss2022-06-241-10/+0
| | | | | | | | | This patch move the 10% broadcast protection from the individual setup to ksz_setup. In the ksz9477, broadcast protection is updated in reset function. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: move switch chip_id detection to ksz_commonArun Ramadoss2022-06-211-16/+0
| | | | | | | | | | | KSZ87xx and KSZ88xx have chip_id representation at reg location 0. And KSZ9477 compatible switch and LAN937x switch have same chip_id detection at location 0x01 and 0x02. To have the common switch detect functionality for ksz switches, ksz_switch_detect function is introduced. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: dsa: ksz: added the generic port_stp_state_set functionArun Ramadoss2022-04-261-3/+0
| | | | | | | | | | | | | The ksz8795 and ksz9477 uses the same algorithm for the port_stp_state_set function except the register address is different. So moved the algorithm to the ksz_common.c and used the dev_ops for register read and write. This function can also used for the lan937x part. Hence making it generic for all the parts. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220424112831.11504-1-arun.ramadoss@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: dsa: microchip: ksz8795: handle eee specif erratumOleksij Rempel2022-03-181-0/+4
| | | | | | | | | | | | | According to erratum described in DS80000687C[1]: "Module 2: Link drops with some EEE link partners.", we need to "Disable the EEE next page exchange in EEE Global Register 2" 1 - https://ww1.microchip.com/downloads/en/DeviceDoc/KSZ87xx-Errata-DS80000687C.pdf Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220316125529.1489045-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: microchip: ksz8795: Fix PVID tag insertionBen Hutchings2021-08-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | ksz8795 has never actually enabled PVID tag insertion, and it also programmed the PVID incorrectly. To fix this: * Allow tag insertion to be controlled per ingress port. On most chips, set bit 2 in Global Control 19. On KSZ88x3 this control flag doesn't exist. * When adding a PVID: - Set the appropriate register bits to enable tag insertion on egress at every other port if this was the packet's ingress port. - Mask *out* the VID from the default tag, before or-ing in the new PVID. * When removing a PVID: - Clear the same control bits to disable tag insertion. - Don't update the default tag. This wasn't doing anything useful. Fixes: e66f840c08a2 ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by: Ben Hutchings <ben.hutchings@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: ksz8795: add LINK_MD register supportOleksij Rempel2021-06-141-2/+3
| | | | | | | | | Add mapping for LINK_MD register to enable cable testing functionality. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: micrel: move phy reg offsets to common headerMichael Grzeschik2021-06-141-62/+0
| | | | | | | | | | | | Some micrel devices share the same PHY register defines. This patch moves them to one common header so other drivers can reuse them. And reuse generic MII_* defines where possible. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: ksz8795: add support for ksz88xx chipsOleksij Rempel2021-04-271-22/+18
| | | | | | | | | | | We add support for the ksz8863 and ksz8873 chips which are using the same register patterns but other offsets as the ksz8795. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: ksz8795: move register offsets and shifts to separate ↵Michael Grzeschik2021-04-271-85/+0
| | | | | | | | | | | | | | | struct In order to get this driver used with other switches the functions need to use different offsets and register shifts. This patch changes the direct use of the register defines to register description structures, which can be set depending on the chips register layout. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: ksz8795: use num_vlans where possibleMichael Grzeschik2020-12-031-1/+0
| | | | | | | | | | | The value of the define VLAN_TABLE_ENTRIES can be derived from num_vlans. This patch is using the variable num_vlans instead and removes the extra define. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: microchip: ksz8795: use port_cnt instead of TOTOAL_PORT_NUMMichael Grzeschik2020-12-031-2/+0
| | | | | | | | | | | To get the driver working with other chips using different port counts the dyn_mac_table should be flushed depending on the amount of available ports. This patch remove the extra define TOTOAL_PORT_NUM and is making use of the dynamic port_cnt variable instead. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: microchip: ksz8795: use phy_port_cnt where possibleMichael Grzeschik2020-12-031-3/+0
| | | | | | | | | | | | The driver is currently hard coded to SWITCH_PORT_NUM being (TOTAL_PORT_NUM - 1) which is limited to 4 user ports for the ksz8795. The phy_port_cnt is referring to its user ports. The patch removes the extra define and use the assigned variable phy_port_cnt instead so the driver can be used on different switches. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: microchip: ksz8795: use mib_cnt where possibleMichael Grzeschik2020-12-031-3/+0
| | | | | | | | | | | | | | The variable mib_cnt is assigned with TOTAL_SWITCH_COUNTER_NUM. This value can also be derived from the array size of mib_names. This patch uses this calculated value instead, removes the extra define and uses mib_cnt everywhere possible instead of the static define TOTAL_SWITCH_COUNTER_NUM. Keeping it in a separate variable instead of using ARRAY_SIZE everywhere instead makes the driver more flexible for future use of devices with different amount of counters. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: microchip: ksz8795: use reg_mib_cnt where possibleMichael Grzeschik2020-12-031-1/+0
| | | | | | | | | | | | The extra define SWITCH_COUNTER_NUM is a copy of the KSZ8795_COUNTER_NUM define. This patch initializes reg_mib_cnt with KSZ8795_COUNTER_NUM, makes use of reg_mib_cnt everywhere instead and removes the extra define. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: ksz: Add Microchip KSZ8795 DSA driverTristram Ha2019-07-311-0/+1004
Add Microchip KSZ8795 DSA driver. Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-28 21:39:06 +0100