summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net: dsa: rtl8366rb: Support all 4096 VLANsLinus Walleij2020-09-211-1/+1
| | | | | | | | | | | There is an off-by-one error in rtl8366rb_is_vlan_valid() making VLANs 0..4094 valid while it should be 1..4095. Fix it. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mt7530: Add some return-value checksAlex Dewar2020-09-211-9/+22
| | | | | | | | | | | | | | | | | | | In mt7531_cpu_port_config(), if the variable port is neither 5 nor 6, then variable interface will be used uninitialised. Change the function to return -EINVAL in this case. As the return value of mt7531_cpu_port_config() is never checked (even though it returns an int) add a check in the correct place so that the error can be passed up the call stack. Now that we correctly handle errors thrown in this function, also check the return value of mt7531_mac_config() in case an error occurs here. Also add misisng checks to mt7530_setup() and mt7531_setup(), which are another level further up the call stack. Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Addresses-Coverity: 1496993 ("Uninitialized variables") Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: tag_8021q: add VLANs to the master interface tooVladimir Oltean2020-09-211-1/+6
| | | | | | | | | | | | | | | | | | | | The whole purpose of tag_8021q is to send VLAN-tagged traffic to the CPU, from which the driver can decode the source port and switch id. Currently this only works if the VLAN filtering on the master is disabled. Change that by explicitly adding code to tag_8021q.c to add the VLANs corresponding to the tags to the filter of the master interface. Because we now need to call vlan_vid_add, then we also need to hold the RTNL mutex. Propagate that requirement to the callers of dsa_8021q_setup and modify the existing call sites as appropriate. Note that one call path, sja1105_best_effort_vlan_filtering_set -> sja1105_vlan_filtering -> sja1105_setup_8021q_tagging, was already holding this lock. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: rtl8366: Skip PVID setting if not requestedLinus Walleij2020-09-201-0/+3
| | | | | | | | | | We go to lengths to determine whether the PVID should be set for this port or not, and then fail to take it into account. Fix this oversight. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: Implement devlink info get callbackAndrew Lunn2020-09-193-0/+20
| | | | | | | | | Return the driver name and the asic.id with the switch name. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: Add devlink regionsAndrew Lunn2020-09-194-1/+286
| | | | | | | | | | | | | | | | | | | | | Allow the global registers, and the ATU to be snapshot via devlink regions. It is later planned to add support for the port registers. v2: Remove left over debug prints Comment ATU format is generic for mv88e6xxx, not wider v3: Make use of ops structure passed to snapshot function Remove port regions v4: Make use of enum mv88e6xxx_region_id Fix global2/global1 read typ0 Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: Create helper for FIDs in useAndrew Lunn2020-09-192-4/+18
| | | | | | | | | | Refactor the code in mv88e6xxx_atu_new() which builds a bitmaps of FIDs in use into a helper function. This will be reused by the devlink code when dumping the ATU. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: Move devlink code into its own fileAndrew Lunn2020-09-194-254/+279
| | | | | | | | | There will soon be more devlink code. Move the existing code into a file of its own, before we start adding this new code. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: seville: build as separate moduleVladimir Oltean2020-09-196-39/+29
| | | | | | | | Seville does not need to depend on PCI or on the ENETC MDIO controller. There will also be other compile-time differences in the future. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: felix: move the PTP clock structure to felix_vsc9959.cVladimir Oltean2020-09-193-18/+20
| | | | | | | | | | | Not only does Sevile not have a PTP clock, but with separate modules, this structure cannot even live in felix.c, due to the .owner = THIS_MODULE assignment causing this link time error: drivers/net/dsa/ocelot/felix.o:(.data+0x0): undefined reference to `__this_module' Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: seville: duplicate vsc9959_mdio_bus_freeVladimir Oltean2020-09-193-4/+19
| | | | | | | | | | | While we don't plan on making any changes to this function, currently this is the only remaining dependency between felix and seville, after the PCS has been refactored out into pcs-lynx.c. Duplicate this function in seville to break the dependency completely. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: felix: replace tabs with spacesVladimir Oltean2020-09-193-13/+13
| | | | | | | | Over the time, some patches have introduced structures aligned with spaces, near structures aligned with tabs. Fix the inconsistencies. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: seville: reindent defines for MDIO controllerVladimir Oltean2020-09-191-6/+6
| | | | | | | Reindent these definitions to be in line with the rest of the driver. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: seville: remove unused defines for the mdio controllerVladimir Oltean2020-09-191-11/+0
| | | | | | | | | | Some definitions were likely copied from drivers/net/mdio/mdio-mscc-miim.c. They are not necessary, remove them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: ocelot: document why reset procedure is different for felix/sevilleVladimir Oltean2020-09-192-0/+7
| | | | | | | | | | | | The overall idea (issue soft reset, enable memories, initialize memories, enable core) is the same, so it would make sense that an attempt is made to unify the procedures. It is not immediately obvious that the fields are not part of the same register targets, though. So add a comment. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: seville: first enable memories, then initialize themVladimir Oltean2020-09-191-1/+1
| | | | | | | | | | As per documentation, proper startup sequence is: * Enable memories * Initialize memories * Enable core Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: seville: don't write to MEM_ENA twiceVladimir Oltean2020-09-191-1/+0
| | | | | | | There is another one of these right above the readx_poll_status. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: felix: use ocelot_field_{read,write} helpers consistentlyVladimir Oltean2020-09-191-3/+3
| | | | | | | Since these helpers for regmap fields are available, use them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mt7530: Add the support of MT7531 switchLanden Chao2020-09-153-27/+1112
| | | | | | | | | | | | | | | | | | | | | | | | | | Add new support for MT7531: MT7531 is the next generation of MT7530. It is also a 7-ports switch with 5 giga embedded phys, 2 cpu ports, and the same MAC logic of MT7530. Cpu port 6 only supports SGMII interface. Cpu port 5 supports either RGMII or SGMII in different HW sku, but cannot be muxed to PHY of port 0/4 like mt7530. Due to SGMII interface support, pll, and pad setting are different from MT7530. This patch adds different initial setting, and SGMII phylink handlers of MT7531. MT7531 SGMII interface can be configured in following mode: - 'SGMII AN mode' with in-band negotiation capability which is compatible with PHY_INTERFACE_MODE_SGMII. - 'SGMII force mode' without in-band negotiation which is compatible with 10B/8B encoding of PHY_INTERFACE_MODE_1000BASEX with fixed full-duplex and fixed pause. - 2.5 times faster clocked 'SGMII force mode' without in-band negotiation which is compatible with 10B/8B encoding of PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause. Signed-off-by: Landen Chao <landen.chao@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mt7530: Extend device data ready for adding a new hardwareLanden Chao2020-09-152-74/+234
| | | | | | | | | | | | | | Add a structure holding required operations for each device such as device initialization, PHY port read or write, a checker whether PHY interface is supported on a certain port, MAC port setup for either bus pad or a specific PHY interface. The patch is done for ready adding a new hardware MT7531, and keep the same setup logic of existing hardware. Signed-off-by: Landen Chao <landen.chao@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mt7530: Refine message in KconfigLanden Chao2020-09-151-3/+3
| | | | | | | | | Refine message in Kconfig with fixing typo and an explicit MT7621 support. Signed-off-by: Landen Chao <landen.chao@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: tag_8021q: add a context structureVladimir Oltean2020-09-122-90/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While working on another tag_8021q driver implementation, some things became apparent: - It is not mandatory for a DSA driver to offload the tag_8021q VLANs by using the VLAN table per se. For example, it can add custom TCAM rules that simply encapsulate RX traffic, and redirect & decapsulate rules for TX traffic. For such a driver, it makes no sense to receive the tag_8021q configuration through the same callback as it receives the VLAN configuration from the bridge and the 8021q modules. - Currently, sja1105 (the only tag_8021q user) sets a priv->expect_dsa_8021q variable to distinguish between the bridge calling, and tag_8021q calling. That can be improved, to say the least. - The crosschip bridging operations are, in fact, stateful already. The list of crosschip_links must be kept by the caller and passed to the relevant tag_8021q functions. So it would be nice if the tag_8021q configuration was more self-contained. This patch attempts to do that. Create a struct dsa_8021q_context which encapsulates a struct dsa_switch, and has 2 function pointers for adding and deleting a VLAN. These will replace the previous channel to the driver, which was through the .port_vlan_add and .port_vlan_del callbacks of dsa_switch_ops. Also put the list of crosschip_links into this dsa_8021q_context. Drivers that don't support cross-chip bridging can simply omit to initialize this list, as long as they dont call any cross-chip function. The sja1105_vlan_add and sja1105_vlan_del functions are refactored into a smaller sja1105_vlan_add_one, which now has 2 entry points: - sja1105_vlan_add, from struct dsa_switch_ops - sja1105_dsa_8021q_vlan_add, from the tag_8021q ops But even this change is fairly trivial. It just reflects the fact that for sja1105, the VLANs from these 2 channels end up in the same hardware table. However that is not necessarily true in the general sense (and that's the reason for making this change). The rest of the patch is mostly plain refactoring of "ds" -> "ctx". The dsa_8021q_context structure needs to be propagated because adding a VLAN is now done through the ops function pointers inside of it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: tag_8021q: setup tagging via a single function callVladimir Oltean2020-09-121-11/+4
| | | | | | | | | | | There is no point in calling dsa_port_setup_8021q_tagging for each individual port. Additionally, it will become more difficult to do that when we'll have a context structure to tag_8021q (next patch). So refactor this now. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: b53: Report VLAN table occupancy via devlinkFlorian Fainelli2020-09-093-3/+66
| | | | | | | | | We already maintain an array of VLANs used by the switch so we can simply iterate over it to report the occupancy via devlink. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: Implement recommended reset timingPaul Barker2020-09-091-1/+2
| | | | | | | | | | | | | | | The datasheet for the ksz9893 and ksz9477 switches recommend waiting at least 100us after the de-assertion of reset before trying to program the device through any interface. Also switch the existing msleep() call to usleep_range() as recommended in Documentation/timers/timers-howto.rst. The 2ms range used here is somewhat arbitrary, as long as the reset is asserted for at least 10ms we should be ok. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: Disable RGMII in-band status on KSZ9893Paul Barker2020-09-091-0/+3
| | | | | | | | | | | We can't assume that the link partner supports the in-band status reporting which is enabled by default on the KSZ9893 when using RGMII for the upstream port. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: Improve phy mode messagePaul Barker2020-09-091-5/+15
| | | | | | | | | | | | | Always print the selected phy mode for the CPU port when using the ksz9477 driver. If the phy mode was changed, also print the previous mode to aid in debugging. To make the message more clear, prefix it with the port number which it applies to and improve the language a little. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: Make switch detection more informativePaul Barker2020-09-091-0/+3
| | | | | | | | | | | | | | To make switch detection more informative print the result of the ksz9477/ksz9893 compatibility check. With debug output enabled also print the contents of the Chip ID registers as a 40-bit hex string. As this detection is the first communication with the switch performed by the driver, making it easy to see any errors here will help identify issues with SPI data corruption or reset sequencing. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: rtl8366rb: Switch to phylinkLinus Walleij2020-09-071-7/+37
| | | | | | | | | | | | | | This switches the RTL8366RB over to using phylink callbacks instead of .adjust_link(). This is a pretty template switchover. All we adjust is the CPU port so that is why the code only inspects this port. We enhance by adding proper error messages, also disabling the CPU port on the way down and moving dev_info() to dev_dbg(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: rtl8366rb: Support setting MTULinus Walleij2020-09-061-1/+37
| | | | | | | | | | | | | This implements the missing MTU setting for the RTL8366RB switch. Apart from supporting jumboframes, this rids us of annoying boot messages like this: realtek-smi switch: nonfatal error -95 setting MTU on port 0 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: bcm_sf2: Ensure that MDIO diversion is usedFlorian Fainelli2020-09-051-2/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Registering our slave MDIO bus outside of the OF infrastructure is necessary in order to avoid creating double references of the same Device Tree nodes, however it is not sufficient to guarantee that the MDIO bus diversion is used because of_phy_connect() will still resolve to a valid PHY phandle and it will connect to the PHY using its parent MDIO bus which is still the SF2 master MDIO bus. The reason for that is because BCM7445 systems were already shipped with a Device Tree blob looking like this (irrelevant parts omitted for simplicity): ports { #address-cells = <1>; #size-cells = <0>; port@1 { phy-mode = "rgmii-txid"; phy-handle = <&phy0>; reg = <1>; label = "rgmii_1"; }; ... mdio@403c0 { ... phy0: ethernet-phy@0 { broken-turn-around; device_type = "ethernet-phy"; max-speed = <0x3e8>; reg = <0>; compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22"; }; }; There is a hardware issue with chip revisions (Dx) that lead to the development of the following commits: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") 536fab5bf582 ("net: dsa: bcm_sf2: Do not register slave MDIO bus with OF") b8c6cd1d316f ("net: dsa: bcm_sf2: do not use indirect reads and writes for 7445E0") There should have been an internal MDIO bus node created for the chip revision (Dx) that suffers from this problem, but it did not happen back then. Had that happen, that we should have correctly parented phy@0 (bcm53125 below) as child node of the internal MDIO bus, but the production Device Tree blob that was shipped with the firmware targeted the fixed version of the chip, despite both the affected and corrected chips being shipped into production. The problem is that of_phy_connect() for port@1 will happily resolve the 'phy-handle' from the mdio@403c0 node, which bypasses the diversion completely. This results in this double programming that the diversion refers to and aims to avoid. In order to force of_phy_connect() to fail, and have DSA call to dsa_slave_phy_connect(), we must deactivate ethernet-phy@0 from mdio@403c0, and the best way to do that is by removing the phandle property completely. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2020-09-058-9/+13
|\ | | | | | | | | | | | | | | | | | | | | | | We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2020-09-043-3/+7
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ...
| | * net: dsa: mt7530: fix advertising unsupported 1000baseT_HalfLanden Chao2020-08-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove 1000baseT_Half to advertise correct hardware capability in phylink_validate() callback function. Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Landen Chao <landen.chao@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net: dsa: mt7530: Add of_node_put() before break and return statementsSumera Priyadarsini2020-08-251-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Every iteration of for_each_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in mt7530.c by inserting of_node_put() before the break and return statements. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net: ocelot: Add of_node_put() before return statementSumera Priyadarsini2020-08-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in felix.c by inserting of_node_put() before the return statement. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net: dsa: sja1105: Do not use address of compatible member in ↵Nathan Chancellor2020-08-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sja1105_check_device_id Clang warns: drivers/net/dsa/sja1105/sja1105_main.c:3418:38: warning: address of array 'match->compatible' will always evaluate to 'true' [-Wpointer-bool-conversion] for (match = sja1105_dt_ids; match->compatible; match++) { ~~~ ~~~~~~~^~~~~~~~~~ 1 warning generated. We should check the value of the first character in compatible to see if it is empty or not. This matches how the rest of the tree iterates over IDs. Fixes: 0b0e299720bb ("net: dsa: sja1105: use detected device id instead of DT one on mismatch") Link: https://github.com/ClangBuiltLinux/linux/issues/1139 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva2020-08-246-6/+6
| |/ | | | | | | | | | | | | | | | | | | Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
* | net: dsa: bcm_sf2: recalculate switch clock rate based on portsFlorian Fainelli2020-09-042-2/+68
| | | | | | | | | | | | | | | | | | | | | | Whenever a port gets enabled/disabled, recalcultate the required switch clock rate to make sure it always gets set to the expected rate targeting our switch use case. This is only done for the BCM7445 switch as there is no clocking profile available for BCM7278. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: bcm_sf2: request and handle clocksFlorian Fainelli2020-09-042-2/+20
| | | | | | | | | | | | | | | | | | Fetch the corresponding clock resource and enable/disable it during suspend/resume if and only if we have no ports defined for Wake-on-LAN. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: b53: Print err message on SW_RST timeoutPaul Barker2020-09-031-1/+4
| | | | | | | | | | | | | | | | | | This allows us to differentiate between the possible failure modes of b53_switch_reset() by looking at the dmesg output. Signed-off-by: Paul Barker <pbarker@konsulko.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: b53: Use dev_{err,info} instead of pr_*Paul Barker2020-09-031-5/+5
| | | | | | | | | | | | | | | | | | | | | | This change allows us to see which device the err or info messages are referring to if we have multiple b53 compatible devices on a board. As this removes the only pr_*() calls in this file we can drop the definition of pr_fmt(). Signed-off-by: Paul Barker <pbarker@konsulko.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: rtl8366: Refactor VLAN/PVID initLinus Walleij2020-09-022-131/+146
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The VLANs and PVIDs on the RTL8366 utilizes a "member configuration" (MC) which is largely unexplained in the code. This set-up requires a special ordering: rtl8366_set_pvid() must be called first, followed by rtl8366_set_vlan(), else the MC will not be properly allocated. Relax this by factoring out the code obtaining an MC and reuse the helper in both rtl8366_set_pvid() and rtl8366_set_vlan() so we remove this strict ordering requirement. In the process, add some better comments and debug prints so people who read the code understand what is going on. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: rtl8366: Check validity of passed VLANsLinus Walleij2020-09-021-0/+6
| | | | | | | | | | | | | | | | | | | | | | The rtl8366_set_vlan() and rtl8366_set_pvid() get invalid VLANs tossed at it, especially VLAN0, something the hardware and driver cannot handle. Check validity and bail out like we do in the other callbacks. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: mv88e6xxx: Fix W=1 warning with !CONFIG_OFAndrew Lunn2020-09-021-9/+2
| | | | | | | | | | | | | | | | | | | | | | When building on platforms without device tree, e.g. amd64, W=1 gives a warning about mv88e6xxx_mdio_external_match being unused. Replace of_match_node() with of_device_is_compatible() to prevent this warning. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: ocelot: use the Lynx PCS helpers in Felix and SevilleIoana Ciornei2020-08-315-404/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the helper functions introduced by the newly added Lynx PCS MDIO module in the Felix VSC9959 and Seville VSC9953. Instead of representing the PCS as a phy_device, a mdio_device structure will be passed to the Lynx module which is now actually implementing all the PCS configuration and status reporting. All code previously used for PCS monitoring and runtime configuration is removed and replaced will calls to the Lynx PCS operations. Tested on the following SERDES protocols of LS1028A: 0x7777 (2500Base-X), 0x85bb (QSGMII), 0x9999 (SGMII) and 0x13bb (USXGMII). Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2020-08-232-1/+3
|\|
| * net: dsa: b53: check for timeoutTom Rix2020-08-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clang static analysis reports this problem b53_common.c:1583:13: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ent.port &= ~BIT(port); ~~~~~~~~ ^ ent is set by a successful call to b53_arl_read(). Unsuccessful calls are caught by an switch statement handling specific returns. b32_arl_read() calls b53_arl_op_wait() which fails with the unhandled -ETIMEDOUT. So add -ETIMEDOUT to the switch statement. Because b53_arl_op_wait() already prints out a message, do not add another one. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mscc: ocelot: remove duplicate "the the" phrase in Kconfig textColin Ian King2020-08-191-1/+1
| | | | | | | | | | | | | | | | The Kconfig help text contains the phrase "the the" in the help text. Fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: mv88e6xxx: Use generic helper functionKurt Kanzenbach2020-08-201-46/+13
| | | | | | | | | | | | | | | | | | | | In order to reduce code duplication between ptp drivers, generic helper functions were introduced. Use them. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-06 15:46:41 +0100