summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/altera (follow)
Commit message (Collapse)AuthorAgeFilesLines
* of: net: pass the dst buffer to of_get_mac_address()Michael Walle2021-04-131-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada2020-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* net: altera: Fix use correct return type for ndo_start_xmit()Yunjian Wang2020-05-051-2/+2
| | | | | | | | The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/althera: Delete hardcoded driver versionLeon Romanovsky2020-02-241-1/+0
| | | | | | | Convert to use default version provided by ethtool. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig2020-01-061-2/+2
| | | | | | | | ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
* net: of_get_phy_mode: Change API to solve int/unit warningsAndrew Lunn2019-11-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner2019-05-3011-132/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-212-0/+2
| | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: ethernet: support of_get_mac_address new ERR_PTR errorPetr Štetiar2019-05-071-1/+1
| | | | | | | | | | | | | | There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: altera_tse: fix msgdma_tx_completion on non-zero fill_level caseTomonori Sakita2019-01-271-1/+2
| | | | | | | | | | | | | | If fill_level was not zero and status was not BUSY, result of "tx_prod - tx_cons - inuse" might be zero. Subtracting 1 unconditionally results invalid negative return value on this case. Make sure not to return an negative value. Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Reviewed-by: Dalon L Westergreen <dalon.westergreen@linux.intel.com> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: altera_tse: fix connect_local_phy error pathAtsushi Nemoto2019-01-231-1/+3
| | | | | | | | | The connect_local_phy should return NULL (not negative errno) on error, since its caller expects it. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: Use phy_set_max_speed() to limit advertised speedAndrew Lunn2018-09-131-4/+1
| | | | | | | | | | Many Ethernet MAC drivers want to limit the PHY to only advertise a maximum speed of 100Mbs or 1Gbps. Rather than using a mask, make use of the helper function phy_set_max_speed(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet: Use octal not symbolic permissionsJoe Perches2018-03-261-3/+3
| | | | | | | | | | | | | | Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: generalize napi_complete_done()Eric Dumazet2017-01-301-1/+1
| | | | | | | | | | | | napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Makefile: drop -D__CHECK_ENDIAN__ from cflagsMichael S. Tsirkin2016-12-151-1/+0
| | | | | | | | | | | That's the default now, no need for makefiles to set it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-12-031-13/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Couple conflicts resolved here: 1) In the MACB driver, a bug fix to properly initialize the RX tail pointer properly overlapped with some changes to support variable sized rings. 2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix overlapping with a reorganization of the driver to support ACPI, OF, as well as PCI variants of the chip. 3) In 'net' we had several probe error path bug fixes to the stmmac driver, meanwhile a lot of this code was cleaned up and reorganized in 'net-next'. 4) The cls_flower classifier obtained a helper function in 'net-next' called __fl_delete() and this overlapped with Daniel Borkamann's bug fix to use RCU for object destruction in 'net'. It also overlapped with Jiri's change to guard the rhashtable_remove_fast() call with a check against tc_skip_sw(). 5) In mlx4, a revert bug fix in 'net' overlapped with some unrelated changes in 'net-next'. 6) In geneve, a stale header pointer after pskb_expand_head() bug fix in 'net' overlapped with a large reorganization of the same code in 'net-next'. Since the 'net-next' code no longer had the bug in question, there was nothing to do other than to simply take the 'net-next' hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ethernet: altera: TSE: do not use tx queue lock in tx completion handlerLino Sanfilippo2016-12-021-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver already uses its private lock for synchronization between xmit and xmit completion handler making the additional use of the xmit_lock unnecessary. Furthermore the driver does not set NETIF_F_LLTX resulting in xmit to be called with the xmit_lock held and then taking the private lock while xmit completion handler does the reverse, first take the private lock, then the xmit_lock. Fix these issues by not taking the xmit_lock in the tx completion handler. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffersLino Sanfilippo2016-12-021-10/+0
| | | | | | | | | | | | | | | | | | An explicit dma sync for device directly after mapping as well as an explicit dma sync for cpu directly before unmapping is unnecessary and costly on the hotpath. So remove these calls. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ethernet: altera: fix fixed-link phydev leaksJohan Hovold2016-11-301-1/+8
| | | | | | | | | | | | | | | | | | Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Fixes: 7cdbc6f74f8e ("altera tse: add support for fixed-links.") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: altera_tse: add support for SGMII PCSNeill Whillans2016-12-022-0/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the (optional) SGMII PCS functionality of the Altera TSE MAC. If the phy-mode is set to 'sgmii' then we attempt to discover and initialise the PCS so that the MAC can communicate to the PHY. The PCS IP block provides a scratch register for testing presence of the PCS, which is mapped into one of the two MDIO spaces present in the MAC's register space. Once we have determined that the scratch register is functioning, we attempt to initialise the PCS to auto-negotiate an SGMII link with the PHY. There is no need to monitor or manage the SGMII link beyond this, since the normal PHY MDIO will then be used to monitor the media layer. The Altera TSE MAC has only one way in which it can be configured with an SGMII PCS, and as such, this patch only looks to the phy-mode to select whether or not to attempt to initialise the PCS registers. During initialisation, we report the PCS's equivalent of a PHY ID register. This can be parameterised during the IP instantiation and is often left as '0x00000000' which is not an error. Signed-off-by: Neill Whillans <neill.whillans@codethink.co.uk> Reviewed-by: Daniel Silverstone <daniel.silverstone@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: eth: altera: Fix error return code in altera_tse_probe()Wei Yongjun2016-10-261-0/+2
| | | | | | | | | | | | | | | | Fix to return error code -EINVAL from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ethernet: use core min/max MTU checkingJarod Wilson2016-10-182-12/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | et131x: min_mtu 64, max_mtu 9216 altera_tse: min_mtu 64, max_mtu 1500 amd8111e: min_mtu 60, max_mtu 9000 bnad: min_mtu 46, max_mtu 9000 macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability xgmac: min_mtu 46, max_mtu 9000 cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326) enic: min_mtu 68, max_mtu 9000 gianfar: min_mtu 50, max_mu 9586 hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2) ksz884x: min_mtu 60, max_mtu 1894 myri10ge: min_mtu 68, max_mtu 9000 natsemi: min_mtu 64, max_mtu 2024 nfp: min_mtu 68, max_mtu hardware-specific forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware pch_gbe: min_mtu 46, max_mtu 10300 pasemi_mac: min_mtu 64, max_mtu 9000 qcaspi: min_mtu 46, max_mtu 1500 - remove qcaspi_netdev_change_mtu as it is now redundant rocker: min_mtu 68, max_mtu 9000 sxgbe: min_mtu 68, max_mtu 9000 stmmac: min_mtu 46, max_mtu depends on hardware tehuti: min_mtu 60, max_mtu 16384 - driver had no max mtu checking, but product docs say 16k jumbo packets are supported by the hardware netcp: min_mtu 68, max_mtu 9486 - remove netcp_ndo_change_mtu as it is now redundant via-velocity: min_mtu 64, max_mtu 9000 octeon: min_mtu 46, max_mtu 65370 CC: netdev@vger.kernel.org CC: Mark Einon <mark.einon@gmail.com> CC: Vince Bridgers <vbridger@opensource.altera.com> CC: Rasesh Mody <rasesh.mody@qlogic.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Christian Benvenuti <benve@cisco.com> CC: Sujith Sankar <ssujith@cisco.com> CC: Govindarajulu Varadarajan <_govind@gmx.com> CC: Neel Patel <neepatel@cisco.com> CC: Claudiu Manoil <claudiu.manoil@freescale.com> CC: Yisen Zhuang <yisen.zhuang@huawei.com> CC: Salil Mehta <salil.mehta@huawei.com> CC: Hyong-Youb Kim <hykim@myri.com> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Olof Johansson <olof@lixom.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Byungho An <bh74.an@samsung.com> CC: Girish K S <ks.giri@samsung.com> CC: Vipul Pandya <vipul.pandya@samsung.com> CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Wingman Kwok <w-kwok2@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet: altera: add missing of_node_putPeter Chen2016-08-021-0/+1
| | | | | | | | of_node_put needs to be called when the device node which is got from of_parse_phandle (or of_node_get) has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: altera_tse: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes2016-06-221-22/+2
| | | | | | | | There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: altera_tse: use phydev from struct net_devicePhilippe Reynes2016-06-223-14/+9
| | | | | | | | | | The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: eth: altera: do not free array priv->mdio->irqColin Ian King2016-03-071-1/+0
| | | | | | | | | | | | priv->mdio->irq used to be allocated and required freeing, but it is now a fixed sized array and should no longer be free'd. Issue detected using static analysis with CoverityScan Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add an mdio_device structureAndrew Lunn2016-01-071-1/+1
| | | | | | | | | Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* mdio: Move allocation of interrupts into coreAndrew Lunn2016-01-071-12/+1
| | | | | | | | | | Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: eth: altera: Fix the initial device operstateAtsushi Nemoto2015-09-091-0/+1
| | | | | | | | Call netif_carrier_off() prior to register_netdev(), otherwise userspace can see incorrect link state. Signed-off-by: Atsushi Nemoto <nemoto@toshiba-tops.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: eth: altera: fix napi poll_list corruptionAtsushi Nemoto2015-09-041-2/+1
| | | | | | | | | tse_poll() calls __napi_complete() with irq enabled. This leads napi poll_list corruption and may stop all napi drivers working. Use napi_complete() instead of __napi_complete(). Signed-off-by: Atsushi Nemoto <nemoto@toshiba-tops.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: eth: altera: Remove sgdmadesclen member from altera_tse_privateTobias Klauser2015-08-123-6/+4
| | | | | | | | | altera_tse_private->sgdmadesclen is always assigned assigned the same value and never changes during runtime. Remove the struct member and use a new define for sizeof(struct sgdma_descrip) instead. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* altera_tse: Correct rx packet lengthVlastimil Setka2015-04-291-0/+6
| | | | | | | | | | Altera TSE MAC rx DMA transfer starts with the 2 additional bytes for IP payload alignment. This patch fixes tse_rx() function loop which reads DMA rx status and extracts packet length from it. Status signalises a whole DMA transfer length, which is 2 bytes longer than the packet itself. Signed-off-by: Vlastimil Setka <setka@vsis.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
* altera tse: add support for fixed-links.Andreas Oetken2015-04-261-8/+29
| | | | | | | | | Add support for fixed-links in configurations without PHY. (e.g. connection to a switch, SGMII point to point, SFPs) Check: Documentation/devicetree/bindings/net/fixed-link.txt. Signed-off-by: Andreas Oetken <ennoerlangen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: eth: altera: Resolve false errors from MSGDMA to TSEChee Nouk Phoon2015-04-251-4/+1
| | | | | | | | | | | | | | | | | | | This patch resolves false errors from MSGDMA in TX mSGDMA MM to ST mode, and is a continuation of the patch recently submitted by Andrea Oetken. The MSGDMA had a logic bug that masked detection of this issue prior to Quartus 14.1/Build 164. When the MSGDMA logic bug was addressed in Quartus 14.1/Build 164, the driver problem was exposed. The problem is corrected by making sure MSGDMA_DESC_CTL_TR_ERR_IRQ is not set for any of the transmit DMA descriptors, and only used for receive descriptors. Fixes: 71cd26e altera tse: Error-Bit on tx-avalon-stream always set. Signed-off-by: Chee Nouk Phoon <cnphoon@altera.com> Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com>a Cc: Andreas Oetken <ennoerlangen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* altera tse: Error-Bit on tx-avalon-stream always set.Andreas Oetken2015-04-211-1/+0
| | | | | | | | | | | | | | | | | | | | The Error-Bit on the avalon streaming interface of the tx-dma-channel was always set. In SGMII configurations this leads to error-symbols on the PCS and packet-rejection on the receiver side (e.g. SGMII/1000Base-X connected switch). This only applies to the tse-configuration with MSGDMA. This issue was detected and fixed on a custom board with a direct connection to a Marvell switch in SGMII-PHY-Mode. (incl. custom patches for SGMII-PCS). According to the datasheet if ff_tx_err (avalon-streaming) is set it is forwarded to gm_tx_err. As a result the PCS is forwarding the error by sending a "/V/"-caracter. Signed-off-by: Andreas Oetken <ennoerlangen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* altera tse: Fix network-delays and -retransmissions after high throughput.Andreas Oetken2015-04-171-2/+7
| | | | | | | | | | | | | | | Fix bug which occurs when more than <limit> packets are available during napi-poll, leading to "delays" and retransmissions on the network. Check for (count < limit) before checking the get_rx_status in tse_rx-function. Function get_rx_status is reading from the response-fifo. If there is currently a response in the fifo, reading the last byte of the response pops the value from the fifo. If the limit is checked as second condition and the limit is reached the fifo is popped but the packet is not processed. Signed-off-by: Andreas Oetken <ennoerlangen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Altera TSE: constify of_device_id arrayFabian Frederick2015-03-171-2/+2
| | | | | | | | of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-03-041-24/+23
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * altera_tse: Fixes in NAPI and interrupt handling pathsVlastimil Setka2015-02-241-23/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Incorrect NAPI polling caused WARNING at net/core/dev.c net_rx_action. Some stability issues were also seen at high throughput and system load before this patch. This patch contains several changes in altera_tse_main.c: - tse_rx() is fixed to not process more than `limit` frames - tse_poll() is refactored to match NAPI logic - only received frames are counted for return value - removed bogus condition `(rxcomplete >= budget || txcomplete > 0)` - replace by: if (rxcomplete < budget) -> call __napi_complete and enable irq - altera_isr() - replace spin_lock_irqsave() by spin_lock() - we are in isr - use spinlocks just over irq manipulation, not over __napi_schedule - reset IRQ first, then disable and schedule napi This is a cleaned up resubmission from Vlastimil's recent submission. Signed-off-by: Vlastimil Setka <setka@vsis.cz> Signed-off-by: Roman Pisl <rpisl@kky.zcu.cz> Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * altera_tse: Correct typo in obtaining tx_fifo_depth from devicetreeVlastimil Setka2015-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | This patch corrects a typo in the way tx_fifo_depth is read from the devicetree. This patch was submitted by Vlastimil about a week ago, and is now cleaned up and resubmitted. Signed-off-by: Vlastimil Setka <setka@vsis.cz> Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: eth: altera: Change reset_mac failure message masks from err to dbgVince Bridgers2015-02-191-2/+10
| | | | | | | | | | | | | | | | | | | | This debug output is not really an error message since mac reset can fail if the phy clocks are gated, specifically when the phy has been placed in a powered down or isolation mode. The netdev output masks were changed from err to dbg, and comments added in the code. Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: eth: altera: Change access ports to mdio for all xMII applicationsVince Bridgers2015-02-191-4/+4
|/ | | | | | | | | | | | | Change use of Altera TSE's MDIO access from phy 0 registers to phy 1 registers. This allows support for GMII, MII, RGMII, and SGMII designs where the external PHY is always accesible through Altera TSE's MDIO phy 1 registers and Altera's PCS is accessible through MDIO phy 0 registers for SGMII applications. Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Tested-by: Kai Lin Ng <kailng@altera.com> Tested-by: Dalon Westergreen <dwesterg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Altera TSE: Add missing phydevKostya Belezko2015-01-021-9/+6
| | | | | | | | | | | | | | | | | Altera network device doesn't come up after ifconfig eth0 down ifconfig eth0 up The reason behind is clearing priv->phydev during tse_shutdown(). The phydev is not restored back at tse_open(). Resubmiting as to follow Tobias Klauser suggestion. phy_start/phy_stop are called on each ifup/ifdown and phy_disconnect is called once during the module removal. Signed-off-by: Kostya Belezko <bkostya@hotmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: altera: drop owner assignment from platform_driversWolfram Sang2014-10-201-1/+0
| | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Altera TSE: Add support for no PHYWalter Lozano2014-10-061-0/+8
| | | | | | | | | | | This patch avoids PHY and MDIO probing if no PHY chip is present. This is the case mainly in optical links where there is no need for PHY chip, and therefore no need of MDIO. In this scenario Ethernet MAC is directly connected to an optical module through an external SFP transceiver. Signed-off-by: Walter Lozano <walter@vanguardiasur.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
* Altera TSE: Move PHY get addr and MDIO createWalter Lozano2014-10-061-21/+36
| | | | | | | | | Move PHY get addr and MDIO create to a new function to improve readability and make it easier to avoid its usage. This will be useful for example in the case where there is no PHY chip. Signed-off-by: Walter Lozano <walter@vanguardiasur.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: Remove superfluous ether_setup after alloc_etherdevTobias Klauser2014-10-041-1/+0
| | | | | | | | | | | | | | There is no need to call ether_setup after alloc_ethdev since it was already called there. Follow commits c706471b2601 ("net: axienet: remove unnecessary ether_setup after alloc_etherdev") and 3c87dcbfb36c ("net: ll_temac: Remove unnecessary ether_setup after alloc_etherdev") and fix the pattern in all remaining ethernet drivers. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-05-2410-267/+371
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Altera TSE: Disable Multicast filtering to workaround problemVince Bridgers2014-05-151-0/+5
| | | | | | | | | | | | | | | | | | This patch disables multicast hash filtering if present in the hardware and uses promiscuous mode instead until the problem with multicast filtering has been debugged, integrated and tested. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Altera TSE: Fix sparse errors and warningsVince Bridgers2014-05-1510-275/+367
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the many sparse errors and warnings contained in the initial submission of the Altera Triple Speed Ethernet driver, and a few minor cppcheck warnings. Changes are tested on ARM and NIOS2 example designs, and compile tested against multiple architectures. Typical issues addressed were as follows: altera_tse_ethtool.c:136:19: warning: incorrect type in argument 1 (different address spaces) altera_tse_ethtool.c:136:19: expected void const volatile [noderef] <asn:2>*addr altera_tse_ethtool.c:136:19: got unsigned int *<noident> ... altera_sgdma.c:129:31: warning: cast removes address space of expression Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 17:38:24 +0100