summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/aquantia (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net: aquantia: vlan unicast address list correct handlingIgor Russkikh2018-07-067-36/+36
| | | | | | | | | | | | | | | | | | Setting up macvlan/macvtap networks over atlantic NIC results in no traffic over these networks because ndo_set_rx_mode did not listed UC MACs as registered in unicast filter. Here we fix that taking into account maximum number of UC filters supported by hardware. If more than MAX addresses were registered, we just enable promisc and/or allmulti to pass the traffic in. We also remove MULTICAST_ADDRESS_MAX constant from aq_cfg since thats not a configurable parameter at all. Fixes: b21f502 ("net:ethernet:aquantia: Fix for multicast filter handling.") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: fix unsigned numvecs comparison with less than zeroColin Ian King2018-06-091-6/+5
| | | | | | | | | | | | | | | | | | From: Colin Ian King <colin.king@canonical.com> This was originally mistakenly submitted to net-next. Resubmitting to net. The comparison of numvecs < 0 is always false because numvecs is a u32 and hence the error return from a failed call to pci_alloc_irq_vectores is never detected. Fix this by using the signed int ret to handle the error return and assign numvecs to err. Detected by CoverityScan, CID#1468650 ("Unsigned compared against 0") Fixes: a09bd81b5413 ("net: aquantia: Limit number of vectors to actually allocated irqs") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: make function aq_fw2x_get_mac_permanent staticColin Ian King2018-06-041-1/+1
| | | | | | | | | | | | The function aq_fw2x_get_mac_permanent is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'aq_fw2x_get_mac_permanent' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Limit number of vectors to actually allocated irqsIgor Russkikh2018-05-083-10/+12
| | | | | | | | | | | | | | | | Driver should use pci_alloc_irq_vectors return value to correct number of allocated vectors and napi instances. Otherwise it'll panic later in pci_irq_vector. Driver also should allow more than one MSI vectors to be allocated. Error return path from pci_alloc_irq_vectors is also fixed to revert resources in a correct sequence when error happens. Reported-by: Long, Nicholas <nicholas.a.long@baesystems.com> Fixes: 23ee07a ("net: aquantia: Cleanup pci functions module") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: driver should correctly declare vlan_features bitsIgor Russkikh2018-05-081-0/+2
| | | | | | | | | | | | In particular, not reporting SG forced skbs to be linear for vlan interfaces over atlantic NIC. With this fix it is possible to enable SG feature on device and therefore optimize performance. Reported-by: Ma Yuying <yuma@redhat.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: oops when shutdown on already stopped deviceIgor Russkikh2018-04-111-3/+5
| | | | | | | | | | | | | | | In case netdev is closed at the moment of pci shutdown, aq_nic_stop gets called second time. napi_disable in that case hangs indefinitely. In other case, if device was never opened at all, we get oops because of null pointer access. We should invoke aq_nic_stop conditionally, only if device is running at the moment of shutdown. Reported-by: David Arcari <darcari@redhat.com> Fixes: 90869ddfefeb ("net: aquantia: Implement pci shutdown callback") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Regression on reset with 1.x firmwareIgor Russkikh2018-04-111-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | On ASUS XG-C100C with 1.5.44 firmware a special mode called "dirty wake" is active. With this mode when motherboard gets powered (but no poweron happens yet), NIC automatically enables powersave link and watches for WOL packet. This normally allows to powerup the PC after AC power failures. Not all motherboards or bios settings gives power to PCI slots, so this mode is not enabled on all the hardware. 4.16 linux driver introduced full hardware reset sequence This is required since before that we had no NIC hardware reset implemented and there were side effects of "not clean start". But this full reset is incompatible with "dirty wake" WOL feature it keeps the PHY link in a special mode forever. As a consequence, driver sees no link and no traffic. To fix this we forcibly change FW state to idle state before doing the full reset. This makes FW to restore link state. Fixes: c8c82eb net: aquantia: Introduce global AQC hardware reset sequence Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Make function hw_atl_utils_mpi_set_speed() staticWei Yongjun2018-03-271-1/+1
| | | | | | | | | | Fixes the following sparse warning: drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:508:5: warning: symbol 'hw_atl_utils_mpi_set_speed' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-03-2310-30/+99
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: aquantia: driver version bumpIgor Russkikh2018-03-221-1/+1
| | | | | | | | | | Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: aquantia: Implement pci shutdown callbackIgor Russkikh2018-03-223-0/+36
| | | | | | | | | | | | | | | | | | | | | | We should close link and all NIC operations during shutdown. On some systems graceful reboot never closes NIC interface on its own, but only indicates pci device shutdown. Without explicit handler, NIC rx rings continued to transfer DMA data into prepared buffers while CPU rebooted already. That caused memory corruptions on soft reboot. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: aquantia: Allow live mac address changesIgor Russkikh2018-03-221-0/+2
| | | | | | | | | | | | | | | | There is nothing prevents us from changing MAC on the running interface. Allow this with ndev priv flag. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: aquantia: Add tx clean budget and valid budget handling logicIgor Russkikh2018-03-224-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | We should report to napi full budget only when we have more job to do. Before this fix, on any tx queue cleanup we forced napi to do poll again. Thats a waste of cpu resources and caused storming with napi polls when there was at least one tx on each interrupt. With this fix we report full budget only when there is more job on TX to do. Or, as before, when rx budget was fully consumed. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: aquantia: Change inefficient wait loop on fw data readsIgor Russkikh2018-03-222-15/+28
| | | | | | | | | | | | | | | | | | | | | | | | B1 hardware changes behavior of mailbox interface, it has busy bit always raised. Data ready condition should be detected by increment of address register. Old code has empty `for` loop, and that caused cpu overloads on B1 hardware. aq_nic_service_timer_cb consumed ~100ms because of that. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: aquantia: Fix a regression with reset on old firmwareIgor Russkikh2018-03-221-0/+4
| | | | | | | | | | | | | | | | | | FW 1.5.58 and below needs a fixed delay even after 0x18 register is filled. Otherwise, setting MPI_INIT state too fast causes traffic hang. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: aquantia: Fix hardware reset when SPI may rarely hangupIgor Russkikh2018-03-221-5/+15
| | | | | | | | | | | | | | | | | | Under some circumstances (notably using thunderbolt interface) SPI on chip reset may be in active transaction. Here we forcibly cleanup SPI to prevent possible hangups. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-02-241-4/+10
|\|
| * net: aquantia: Fix error handling in aq_pci_probe()Dan Carpenter2018-02-221-4/+10
| | | | | | | | | | | | | | | | | | We should check "self->aq_hw" for allocation failure, and also we should free it on the error paths. Fixes: 23ee07ad3c2f ("net: aquantia: Cleanup pci functions module") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | aquantia: add Makefiles to all directoriesJakub Kicinski2018-02-221-0/+2
|/ | | | | | | | To be able to build separate objects we need to provide Kbuild with a Makefile in each directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: make symbol hw_atl_boards staticWei Yongjun2018-01-231-1/+1
| | | | | | | | | | | | Fixes the following sparse warning: drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c:50:34: warning: symbol 'hw_atl_boards' was not declared. Should it be static? Fixes: 4948293ff963 ("net: aquantia: Introduce new AQC devices and capabilities") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Fix error return code in aq_pci_probe()Wei Yongjun2018-01-231-1/+3
| | | | | | | | | | Fix to return error code -ENOMEM from the aq_ndev_alloc() error handling case instead of 0, as done elsewhere in this function. Fixes: 23ee07ad3c2f ("net: aquantia: Cleanup pci functions module") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: bump driver version to match aquantia internal numberingIgor Russkikh2018-01-221-3/+3
| | | | | Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Report correct mediatype via ethtoolIgor Russkikh2018-01-221-3/+13
| | | | | | | | For devices with known capabilities of Fibre media type we now report that to ethtool. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Introduce global AQC hardware reset sequenceIgor Russkikh2018-01-223-29/+183
| | | | | | | | | The detailed reset sequence ensures all HW components are in aligned state before NIC startup. It also supports cards with signed firmware (RBL) and checks if their FW is valid. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Introduce support for new firmware on AQC cardsIgor Russkikh2018-01-225-4/+257
| | | | | | | | This defines fw2x operations table and corresponding methods. Some of the functions are being shared with 1.x firmware Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Introduce firmware ops callbacksIgor Russkikh2018-01-228-81/+101
| | | | | | | | | New AQC cards will have an updated firmware with new binary interface. This patch extracts firmware specific operations into a separate table and prepares for the introduction of new fw 2.x and 3.x Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Change confusing no_ff_addr to more meaningful nameIgor Russkikh2018-01-224-4/+9
| | | | | | | | | The address to check if HW is not dead/hang could be stored in capabilities, since it is a constant. Change its name to better reflect the idea. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Remove create/destroy from hw opsIgor Russkikh2018-01-223-54/+0
| | | | | | | | These ops are not related to HW and are now implemented in pci module. Thus, remove these ops pointers and implementation. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Cleanup pci functions moduleIgor Russkikh2018-01-227-385/+156
| | | | | | | | | | | | Driver contained a dead code of maintaining multiple pci port instances. That will never be used since for each pci function a separate NIC instance is created. Simplify this, making pci module only responsible for pci resource management. NIC initialization is also simplified accordingly. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Convert hw and caps structures to const static pointersIgor Russkikh2018-01-222-50/+50
| | | | | | | | | | | This removes unnecessary structure copying, and prepares the driver for separate firmware ops table introduction. We also remove extra copy of capabilities structure (which is const actually) and also replace it with a const pointer in aq_nic_cfg. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Introduce new AQC devices and capabilitiesIgor Russkikh2018-01-2212-159/+239
| | | | | | | | | | | | | | | | | | A number of new AQC devices is going to be released. To support more flexible capabilities management a number of static caps instances is now declared. Devices now are mainly differs by supported speeds, but in future more parameters will be customized. A set of AQC100 devices have fibre media, not twisted pair - this is also reflected in new capabilities definitions. HW level also now directly exports hw_ops for each of A0/B0 hardware. PCI configuration now uses a device configuration table where each device ID is explicitly mapped with hardware OPs and capabilities structures. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Introduce new device ids and constantsIgor Russkikh2018-01-2210-87/+94
| | | | | | | | | | | | New set of aquantia devices has an upgraded hardware (B1). The hardware interface is identical to B0. The difference will be in firmware which is incompatible with old one. Reorganized and removed duplicate speed and devid definitions Introduced explicit flow control configuration defines Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Fix internal stats calculation on rxIgor Russkikh2018-01-161-2/+2
| | | | | | | | skb len should be fetched before gro_receive - otherwise we may get wrong or even outdated skb data. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Prepend hw access functions declarations with prefixIgor Russkikh2018-01-165-840/+922
| | | | | | | | | | Internal functions for registers and HW access were not prefixed. This introduce noise in global kernel symbols. Here we add explicit prefix 'hw_atl' to all the HW access layer functions. Alignment and styling were fixed as well. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Fix register definitions to linux styleIgor Russkikh2018-01-163-1139/+1173
| | | | | | | | | | Original driver code had internal registers and masks declarations in low case and without any prefix. Here we make all these uppercase and add already used HW_ATL prefix to recognize these. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Eliminate aq_nic structure abstractionIgor Russkikh2018-01-1610-54/+46
| | | | | | | | | | aq_nic_s was hidden in aq_nic_internal.h, that made it difficult to access nic fields and structures from other modules. This change moves aq_nic_s struct into aq_nic.h and thus makes it available to other driver modules, mainly pci module and hw related module. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Simplify dependencies between pci modulesIgor Russkikh2018-01-166-106/+113
| | | | | | | | | Eliminate useless passing of net_device_ops and ethtools_ops through deep chain of calls. Move all pci related code into aq_pci_func module. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Add const qualifiers for hardware ops tablesIgor Russkikh2018-01-1614-20/+21
| | | | | | | | Hardware operations and capabilities tables are constants and never changed. Declare these as constants. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Remove duplicate hardware descriptors declarationsIgor Russkikh2018-01-163-62/+31
| | | | | Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Cleanup hardware access modulesIgor Russkikh2018-01-168-97/+71
| | | | | | | | | Use direct aq_hw_s *self reference where possible Eliminate useless abstraction PHAL, duplicated structures definitions, Simplify nic config structure creation and management. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Cleanup status flags accessesIgor Russkikh2018-01-169-17/+11
| | | | | | | | Usage of aq_obj_s structure is noop, here we remove it replacing access to flags filed directly. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Eliminate AQ_DIMOF, replace with ARRAY_SIZEIgor Russkikh2018-01-165-6/+4
| | | | | Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Increment driver versionIgor Russkikh2017-12-152-3/+6
| | | | | | | Add a suffix to distinguish kernel mainline version and aquantia releases Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Fix typo in ethtool statistics namesIgor Russkikh2017-12-151-8/+8
| | | | | Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Update hw counters on hw initIgor Russkikh2017-12-152-0/+8
| | | | | | | | | | | On very first start we should read out current HW counter values to make diff based calculations later. This also should be done each time NIC gets down/up or wakes up after sleep state. We reset link state explicitly to prevent diffs from being summed this first time. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Improve link state and statistics check interval callbackIgor Russkikh2017-12-152-3/+6
| | | | | | | | Reduce timeout from 2 secs to 1 sec. If link is down, reduce it to 500msec. This speeds up link detection. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Fill in multicast counter in ndev stats from hardwareIgor Russkikh2017-12-151-0/+1
| | | | | | | This metric comes from HW and is also diff-calculated, like other counters Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Fill ndev stat couters from hardwareIgor Russkikh2017-12-151-16/+16
| | | | | | | | | | Originally they were filled from ring sw counters. These sometimes incorrectly calculate byte and packet amounts when using LRO/LSO and jumboframes. Filling ndev counters from hardware makes them precise. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Extend stat counters to 64bit valuesIgor Russkikh2017-12-154-67/+79
| | | | | | | | | | Device hardware provides only 32bit counters. Using these directly causes byte counters to overflow soon. A separate nic level structure with 64 bit counters is now used to collect incrementally all the stats and report these counters to ethtool stats and ndev stats. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: aquantia: Fix hardware DMA stream overload on large MRRSIgor Russkikh2017-12-152-0/+18
| | | | | | | | | | | | | | Systems with large MRRS on device (2K, 4K) with high data rates and/or large MTU, atlantic observes DMA packet buffer overflow. On some systems that causes PCIe transaction errors, hardware NMIs or datapath freeze. This patch 1) Limits MRRS from device side to 2K (thats maximum our hardware supports) 2) Limit maximum size of outstanding TX DMA data read requests. This makes hardware buffers running fine. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 23:12:47 +0100