summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mediatek (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCsArınç ÜNAL2023-05-241-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit c6d96df9fa2c ("net: ethernet: mtk_eth_soc: drop generic vlan rx offload, only use DSA untagging") makes VLAN RX offloading to be only used on the SoCs without the MTK_NETSYS_V2 ability (which are not just MT7621 and MT7622). The commit disables the proper handling of special tagged (DSA) frames, added with commit 87e3df4961f4 ("net-next: ethernet: mediatek: add CDM able to recognize the tag for DSA"), for non MTK_NETSYS_V2 SoCs when it finds a MAC that does not use DSA. So if the other MAC uses DSA, the CDMQ component transmits DSA tagged frames to the CPU improperly. This issue can be observed on frames with TCP, for example, a TCP speed test using iperf3 won't work. The commit disables the proper handling of special tagged (DSA) frames because it assumes that these SoCs don't use more than one MAC, which is wrong. Although I made Frank address this false assumption on the patch log when they sent the patch on behalf of Felix, the code still made changes with this assumption. Therefore, the proper handling of special tagged (DSA) frames must be kept enabled in all circumstances as it doesn't affect non DSA tagged frames. Hardware DSA untagging, introduced with the commit 2d7605a72906 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging"), and VLAN RX offloading are operations on the two CDM components of the frame engine, CDMP and CDMQ, which connect to Packet DMA (PDMA) and QoS DMA (QDMA) and are between the MACs and the CPU. These operations apply to all MACs of the SoC so if one MAC uses DSA and the other doesn't, the hardware DSA untagging operation will cause the CDMP component to transmit non DSA tagged frames to the CPU improperly. Since the VLAN RX offloading feature configuration was dropped, VLAN RX offloading can only be used along with hardware DSA untagging. So, for the case above, we need to disable both features and leave it to the CPU, therefore software, to untag the DSA and VLAN tags. So the correct way to handle this is: For all SoCs: Enable the proper handling of special tagged (DSA) frames (MTK_CDMQ_IG_CTRL). For non MTK_NETSYS_V2 SoCs: Enable hardware DSA untagging (MTK_CDMP_IG_CTRL). Enable VLAN RX offloading (MTK_CDMP_EG_CTRL). When a non MTK_NETSYS_V2 SoC MAC does not use DSA: Disable hardware DSA untagging (MTK_CDMP_IG_CTRL). Disable VLAN RX offloading (MTK_CDMP_EG_CTRL). Fixes: c6d96df9fa2c ("net: ethernet: mtk_eth_soc: drop generic vlan rx offload, only use DSA untagging") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: mtk_eth_soc: fix NULL pointer dereferenceDaniel Golle2023-05-101-1/+1
| | | | | | | | | | | Check for NULL pointer to avoid kernel crashing in case of missing WO firmware in case only a single WEDv2 device has been initialized, e.g. on MT7981 which can connect just one wireless frontend. Fixes: 86ce0d09e424 ("net: ethernet: mtk_eth_soc: use WO firmware for MT7981") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: mtk_eth_soc: drop generic vlan rx offload, only use DSA untaggingFelix Fietkau2023-05-032-67/+40
| | | | | | | | | | | | | | | | | | | | Through testing I found out that hardware vlan rx offload support seems to have some hardware issues. At least when using multiple MACs and when receiving tagged packets on the secondary MAC, the hardware can sometimes start to emit wrong tags on the first MAC as well. In order to avoid such issues, drop the feature configuration and use the offload feature only for DSA hardware untagging on MT7621/MT7622 devices where this feature works properly. Fixes: 08666cbb7dd5 ("net: ethernet: mtk_eth_soc: add support for configuring vlan rx offload") Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230426172153.8352-1-linux@fw-web.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni2023-04-263-3/+7
|\ | | | | | | | | | | No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
| * net: ethernet: mediatek: remove return value check of `mtk_wed_hw_add_debugfs`Wang Zhang2023-04-231-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Smatch complains that: mtk_wed_hw_add_debugfs() warn: 'dir' is an error pointer or valid Debugfs checks are generally not supposed to be checked for errors and it is not necessary here. fix it by just deleting the dead code. Signed-off-by: Wang Zhang <silver_code@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ethernet: mtk_eth_soc: use WO firmware for MT7981Daniel Golle2023-04-222-1/+7
| | | | | | | | | | | | | | | | In order to support wireless offloading on MT7981 we need to load the appropriate firmware. Recognize MT7981 and load mt7981_wo.bin. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: mtk_eth_soc: mediatek: fix ppe flow accounting for v1 hardwareFelix Fietkau2023-04-232-3/+10
| | | | | | | | | | | | | | | | | | | | Older chips (like MT7622) use a different bit in ib2 to enable hardware counter support. Add macros for both and select the appropriate bit. Fixes: 3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: mtk_eth_soc: use be32 type to store be32 valuesSimon Horman2023-04-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | n_addr is used to store be32 values, so a sparse-friendly array of be32 to store these values. Flagged by sparse: .../mtk_ppe_debugfs.c:59:27: warning: incorrect type in assignment (different base types) .../mtk_ppe_debugfs.c:59:27: expected unsigned int .../mtk_ppe_debugfs.c:59:27: got restricted __be32 [usertype] .../mtk_ppe_debugfs.c:161:46: warning: cast to restricted __be16 No functional changes intended. Compile tested only. Signed-off-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230401-mtk_eth_soc-sparse-v2-1-963becba3cb7@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: ethernet: mtk_eth_soc: mtk_ppe: prefer newly added l2 flowsFelix Fietkau2023-04-071-2/+12
| | | | | | | | | | | | | | | | | | | | When a device is roaming between interfaces and a new flow entry is created, we should assume that its output device is more up to date than whatever entry existed already. Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: mtk_eth_soc: add code for offloading flows from wlan devicesFelix Fietkau2023-04-073-14/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | WED version 2 (on MT7986 and later) can offload flows originating from wireless devices. In order to make that work, ndo_setup_tc needs to be implemented on the netdevs. This adds the required code to offload flows coming in from WED, while keeping track of the incoming wed index used for selecting the correct PPE device. Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-04-061-0/+4
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/google/gve/gve.h 3ce934558097 ("gve: Secure enough bytes in the first TX desc for all TCP pkts") 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format") https://lore.kernel.org/all/20230406104927.45d176f5@canb.auug.org.au/ https://lore.kernel.org/all/c5872985-1a95-0bc8-9dcc-b6f23b439e9d@tessares.net/ Adjacent changes: net/can/isotp.c 051737439eae ("can: isotp: fix race between isotp_sendsmg() and isotp_release()") 96d1c81e6a04 ("can: isotp: add module parameter for maximum pdu size") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: ethernet: mtk_eth_soc: fix remaining throughput regressionFelix Fietkau2023-04-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on further tests, it seems that the QDMA shaper is not able to perform shaping close to the MAC link rate without throughput loss. This cannot be compensated by increasing the shaping rate, so it seems to be an internal limit. Fix the remaining throughput regression by detecting that condition and limiting shaping to ports with lower link speed. This patch intentionally ignores link speed gain from TRGMII, because even on such links, shaping to 1000 Mbit/s incurs some throughput degradation. Fixes: f63959c7eec3 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues") Tested-By: Frank Wunderlich <frank-w@public-files.de> Reported-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-03-303-7/+11
|\| | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c 3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting") 924531326e2d ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flowFelix Fietkau2023-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The cache needs to be flushed to ensure that the hardware stops offloading the flow immediately. Fixes: 33fc42de3327 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries") Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230330120840.52079-3-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: ethernet: mtk_eth_soc: fix L2 offloading with DSA untag offloadFelix Fietkau2023-03-302-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | Check for skb metadata in order to detect the case where the DSA header is not present. Fixes: 2d7605a72906 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging") Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230330120840.52079-2-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: ethernet: mtk_eth_soc: fix flow block refcounting logicFelix Fietkau2023-03-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Since we call flow_block_cb_decref on FLOW_BLOCK_UNBIND, we also need to call flow_block_cb_incref for a newly allocated cb. Also fix the accidentally inverted refcount check on unbind. Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230330120840.52079-1-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: ethernet: mtk_eth_soc: fix tx throughput regression with direct 1G linksFelix Fietkau2023-03-291-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using the QDMA tx scheduler to throttle tx to line speed works fine for switch ports, but apparently caused a regression on non-switch ports. Based on a number of tests, it seems that this throttling can be safely dropped without re-introducing the issues on switch ports that the tx scheduling changes resolved. Link: https://lore.kernel.org/netdev/trinity-92c3826f-c2c8-40af-8339-bc6d0d3ffea4-1678213958520@3c-app-gmx-bs16/ Fixes: f63959c7eec3 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues") Reported-by: Frank Wunderlich <frank-w@public-files.de> Reported-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230324140404.95745-1-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: ethernet: mtk_eth_soc: switch to external PCS driverDaniel Golle2023-03-215-319/+56
| | | | | | | | | | | | | | | | | | | | Now that we got a PCS driver, use it and remove the now redundant PCS code and it's header macros from the Ethernet driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: ethernet: mtk_eth_soc: ppe: add support for flow accountingDaniel Golle2023-03-217-9/+172
| | | | | | | | | | | | | | | | | | | | | | The PPE units found in MT7622 and newer support packet and byte accounting of hw-offloaded flows. Add support for reading those counters as found in MediaTek's SDK[1]. [1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/bc6a6a375c800dc2b80e1a325a2c732d1737df92 Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: ethernet: mtk_eth_soc: set MDIO bus clock frequencyDaniel Golle2023-03-212-0/+28
| | | | | | | | | | | | | | | | | | | | | | Set MDIO bus clock frequency and allow setting a custom maximum frequency from device tree. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: ethernet: mtk_eth_soc: add support for MT7981 SoCDaniel Golle2023-03-214-3/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The MediaTek MT7981 SoC comes with two 1G/2.5G SGMII ports, just like MT7986. In addition MT7981 is equipped with a built-in 1000Base-T PHY which can be used with GMAC1. As many MT7981 boards make use of inverting SGMII signal polarity, add new device-tree attribute 'mediatek,pn_swap' to support them. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-03-182-12/+20
|\| | | | | | | | | | | | | | | | | | | | | | | | | net/wireless/nl80211.c b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy") cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping") https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au tools/testing/selftests/net/Makefile 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: ethernet: mtk_eth_soc: only write values if neededDaniel Golle2023-03-151-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | Only restart auto-negotiation and write link timer if actually necessary. This prevents losing the link in case of minor changes. Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII") Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ethernet: mtk_eth_soc: reset PCS stateDaniel Golle2023-03-152-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Reset the internal PCS state machine when changing interface mode. This prevents confusing the state machine when changing interface modes, e.g. from SGMII to 2500Base-X or vice-versa. Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII") Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-03-102-1/+3
|\| | | | | | | | | | | | | | | | | Documentation/bpf/bpf_devel_QA.rst b7abcd9c656b ("bpf, doc: Link to submitting-patches.rst for general patch submission info") d56b0c461d19 ("bpf, docs: Fix link to netdev-FAQ target") https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: ethernet: mtk_eth_soc: fix RX data corruption issueDaniel Golle2023-03-062-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix data corruption issue with SerDes connected PHYs operating at 1.25 Gbps speed where we could previously observe about 30% packet loss while the bad packet counter was increasing. As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531 switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using rate-adaptation to 2500Base-X mode, this issue only got exposed now when we started trying to use SFP modules operating with 1.25 Gbps with the BananaPi R3 board. The fix is to set bit 12 which disables the RX FIFO clear function when setting up MAC MCR, MediaTek SDK did the same change stating: "If without this patch, kernel might receive invalid packets that are corrupted by GMAC."[1] [1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/d8a2975939a12686c4a95c40db21efdc3f821f63 Fixes: 42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC") Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/138da2735f92c8b6f8578ec2e5a794ee515b665f.1677937317.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mtk_eth_soc: remove support for RMII and REVMII modesRussell King (Oracle)2023-03-091-11/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the conversion of mtk_eth_soc to phylink's supported_interfaces bitmap, these two modes have not been selectable. No one has raised this as an issue. Checking the in-kernel DT files, none of them use either of these modes with this hardware. Daniel Golle concurs: A quick grep through the device trees of the more than 650 ramips and mediatek boards we support in OpenWrt has revealed that *none* of them uses either reduced-MII or reverse-MII PHY modes. I could imaging that some more specialized ramips boards may use the RMII 100M PHY mode to connect with exotic PHYs for industrial or automotive applications (think: for 100BASE-T1 PHY connected via RMII). I have never seen or touched such boards, but there are hints that they do exist. For reverse-MII there are cases in which the Ralink SoC (Rt305x, for example) is used in iNIC mode, ie. connected as a PHY to another SoC, and running only a minimal firmware rather than running Linux. Due to the lack of external DRAM for the Ralink SoC on this kind of boards, the Ralink SoC there will anyway never be able to boot Linux. I've seen this e.g. in multimedia devices like early WiFi-connected not-yet-so-smart TVs. Consequently, the conclusion is that no one uses these modes with this hardware, so we might as well drop support for them. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: mtk_eth_soc: remove unnecessary checks in mtk_mac_config()Russell King (Oracle)2023-03-091-11/+3
| | | | | | | | | | | | | | | | | | | | mtk_mac_config() checks that the interface mode is permitted for the capabilities, but we already do these checks in mtk_add_mac() when initialising phylink's supported_interfaces bitmap. Remove the unnecessary tests. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: mtk_eth_soc: move trgmii ddr2 check to probe functionRussell King (Oracle)2023-03-091-11/+10
| | | | | | | | | | | | | | | | | | | | If TRGMII mode is not permitted when using DDR2 mode, we should handle that when setting up phylink's ->supported_interfaces so phylink knows that this is not supported by the hardware. Move this check to mtk_add_mac(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: mtk_eth_soc: tidy mtk_gmac0_rgmii_adjust()Russell King (Oracle)2023-03-091-15/+19
|/ | | | | | | | Get rid of the multiple tenary operators in mtk_gmac0_rgmii_adjust() replacing them with a single if(), thus making the code easier to read. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: ethernet: mtk_wed: No need to clear memory after a dma_alloc_coherent() ↵Christophe JAILLET2023-02-141-1/+0
| | | | | | | | | | | | | | call dma_alloc_coherent() already clears the allocated memory, there is no need to explicitly call memset(). Moreover, it is likely that the size in the memset() is incorrect and should be "size * sizeof(*ring->desc)". Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/d5acce7dd108887832c9719f62c7201b4c83b3fb.1676184599.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Daniel Borkmann says:Jakub Kicinski2023-02-111-0/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ==================== pull-request: bpf-next 2023-02-11 We've added 96 non-merge commits during the last 14 day(s) which contain a total of 152 files changed, 4884 insertions(+), 962 deletions(-). There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c between commit 5b246e533d01 ("ice: split probe into smaller functions") from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev() is otherwise there a 2nd time, and add XDP features to the existing ice_cfg_netdev() one: [...] ice_set_netdev_features(netdev); netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT | NETDEV_XDP_ACT_XSK_ZEROCOPY; ice_set_ops(netdev); [...] Stephen's merge conflict mail: https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/ The main changes are: 1) Add support for BPF trampoline on s390x which finally allows to remove many test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich. 2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski. 3) Add capability to export the XDP features supported by the NIC. Along with that, add a XDP compliance test tool, from Lorenzo Bianconi & Marek Majtyka. 4) Add __bpf_kfunc tag for marking kernel functions as kfuncs, from David Vernet. 5) Add a deep dive documentation about the verifier's register liveness tracking algorithm, from Eduard Zingerman. 6) Fix and follow-up cleanups for resolve_btfids to be compiled as a host program to avoid cross compile issues, from Jiri Olsa & Ian Rogers. 7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted when testing on different NICs, from Jesper Dangaard Brouer. 8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang. 9) Extend libbpf to add an option for when the perf buffer should wake up, from Jon Doron. 10) Follow-up fix on xdp_metadata selftest to just consume on TX completion, from Stanislav Fomichev. 11) Extend the kfuncs.rst document with description on kfunc lifecycle & stability expectations, from David Vernet. 12) Fix bpftool prog profile to skip attaching to offline CPUs, from Tonghao Zhang. ==================== Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * drivers: net: turn on XDP featuresMarek Majtyka2023-02-031-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A summary of the flags being set for various drivers is given below. Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features that can be turned off and on at runtime. This means that these flags may be set and unset under RTNL lock protection by the driver. Hence, READ_ONCE must be used by code loading the flag value. Also, these flags are not used for synchronization against the availability of XDP resources on a device. It is merely a hint, and hence the read may race with the actual teardown of XDP resources on the device. This may change in the future, e.g. operations taking a reference on the XDP resources of the driver, and in turn inhibiting turning off this flag. However, for now, it can only be used as a hint to check whether device supports becoming a redirection target. Turn 'hw-offload' feature flag on for: - netronome (nfp) - netdevsim. Turn 'native' and 'zerocopy' features flags on for: - intel (i40e, ice, ixgbe, igc) - mellanox (mlx5). - stmmac - netronome (nfp) Turn 'native' features flags on for: - amazon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2, enetc) - funeth - intel (igb) - marvell (mvneta, mvpp2, octeontx2) - mellanox (mlx4) - mtk_eth_soc - qlogic (qede) - sfc - socionext (netsec) - ti (cpsw) - tap - tsnep - veth - xen - virtio_net. Turn 'basic' (tx, pass, aborted and drop) features flags on for: - netronome (nfp) - cavium (thunder) - hyperv. Turn 'redirect_target' feature flag on for: - amanzon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2) - intel (i40e, ice, igb, ixgbe) - ti (cpsw) - marvell (mvneta, mvpp2) - sfc - socionext (netsec) - qlogic (qede) - mellanox (mlx5) - tap - veth - virtio_net - xen Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Marek Majtyka <alardam@gmail.com> Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-02-091-17/+19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | net/devlink/leftover.c / net/core/devlink.c: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") f05bd8ebeb69 ("devlink: move code to a dedicated directory") 687125b5799c ("devlink: split out core code") https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0Vladimir Oltean2023-02-081-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Arınç reports that on his MT7621AT Unielec U7621-06 board and MT7623NI Bananapi BPI-R2, packets received by the CPU over mt7530 switch port 0 (of which this driver acts as the DSA master) are not processed correctly by software. More precisely, they arrive without a DSA tag (in packet or in the hwaccel area - skb_metadata_dst()), so DSA cannot demux them towards the switch's interface for port 0. Traffic from other ports receives a skb_metadata_dst() with the correct port and is demuxed properly. Looking at mtk_poll_rx(), it becomes apparent that this driver uses the skb vlan hwaccel area: union { u32 vlan_all; struct { __be16 vlan_proto; __u16 vlan_tci; }; }; as a temporary storage for the VLAN hwaccel tag, or the DSA hwaccel tag. If this is a DSA master it's a DSA hwaccel tag, and finally clears up the skb VLAN hwaccel header. I'm guessing that the problem is the (mis)use of API. skb_vlan_tag_present() looks like this: #define skb_vlan_tag_present(__skb) (!!(__skb)->vlan_all) So if both vlan_proto and vlan_tci are zeroes, skb_vlan_tag_present() returns precisely false. I don't know for sure what is the format of the DSA hwaccel tag, but I surely know that lowermost 3 bits of vlan_proto are 0 when receiving from port 0: unsigned int port = vlan_proto & GENMASK(2, 0); If the RX descriptor has no other bits set to non-zero values in RX_DMA_VTAG, then the call to __vlan_hwaccel_put_tag() will not, in fact, make the subsequent skb_vlan_tag_present() return true, because it's implemented like this: static inline void __vlan_hwaccel_put_tag(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) { skb->vlan_proto = vlan_proto; skb->vlan_tci = vlan_tci; } What we need to do to fix this problem (assuming this is the problem) is to stop using skb->vlan_all as temporary storage for driver affairs, and just create some local variables that serve the same purpose, but hopefully better. Instead of calling skb_vlan_tag_present(), let's look at a boolean has_hwaccel_tag which we set to true when the RX DMA descriptors have something. Disambiguate based on netdev_uses_dsa() whether this is a VLAN or DSA hwaccel tag, and only call __vlan_hwaccel_put_tag() if we're certain it's a VLAN tag. Arınç confirms that the treatment works, so this validates the assumption. Link: https://lore.kernel.org/netdev/704f3a72-fc9e-714a-db54-272e17612637@arinc9.com/ Fixes: 2d7605a72906 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging") Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg()Tariq Toukan2023-02-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Parameters 'queue_index' and 'napi_id' are passed in a swapped order. Fix it here. Fixes: 23233e577ef9 ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSAArınç ÜNAL2023-02-081-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The special tag is only enabled when the first MAC uses DSA. However, it must be enabled when any MAC uses DSA. Change the check accordingly. This fixes hardware DSA untagging not working on the second MAC of the MT7621 and MT7623 SoCs, and likely other SoCs too. Therefore, remove the check that disables hardware DSA untagging for the second MAC of the MT7621 and MT7623 SoCs. Fixes: a1f47752fd62 ("net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC") Co-developed-by: Richard van Schagen <richard@routerhints.com> Signed-off-by: Richard van Schagen <richard@routerhints.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-02-025-20/+40
|\| | | |/ |/| | | | | | | | | | | | | net/core/gro.c 7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO") b1a78b9b9886 ("net: add support for ipv4 big tcp") https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * mtk_sgmii: enable PCS polling to allow SFP workAlexander Couzens2023-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently there is no IRQ handling (even the SGMII supports it). Enable polling to support SFP ports. Fixes: 14a44ab0330d ("net: mtk_eth_soc: partially convert to phylink_pcs") Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> [ bmork: changed "1" => "true" ] Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: mediatek: sgmii: fix duplex configurationBjørn Mork2023-02-022-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The logic of the duplex bit is inverted. Setting it means half duplex, not full duplex. Fix and rename macro to avoid confusion. Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII") Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: mediatek: sgmii: ensure the SGMII PHY is powered down on configurationAlexander Couzens2023-02-022-11/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code expect the PHY to be in power down which is only true after reset. Allow changes of the SGMII parameters more than once. Only power down when reconfiguring to avoid bouncing the link when there's no reason to - based on code from Russell King. There are cases when the SGMII_PHYA_PWD register contains 0x9 which prevents SGMII from working. The SGMII still shows link but no traffic can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was taken from a good working state of the SGMII interface. Fixes: 42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC") Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> [ bmork: rebased and squashed into one patch ] Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MACArınç ÜNAL2023-02-021-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | According to my tests on MT7621AT and MT7623NI SoCs, hardware DSA untagging won't work on the second MAC. Therefore, disable this feature when the second MAC of the MT7621 and MT7623 SoCs is being used. Fixes: 2d7605a72906 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging") Link: https://lore.kernel.org/netdev/6249fc14-b38a-c770-36b4-5af6d41c21d3@arinc9.com/ Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230128094232.2451947-1-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: ethernet: mtk_eth_soc: Avoid truncating allocationKees Cook2023-01-312-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There doesn't appear to be a reason to truncate the allocation used for flow_info, so do a full allocation and remove the unused empty struct. GCC does not like having a reference to an object that has been partially allocated, as bounds checking may become impossible when such an object is passed to other code. Seen with GCC 13: ../drivers/net/ethernet/mediatek/mtk_ppe.c: In function 'mtk_foe_entry_commit_subflow': ../drivers/net/ethernet/mediatek/mtk_ppe.c:623:18: warning: array subscript 'struct mtk_flow_entry[0]' is partly outside array bounds of 'unsigned char[48]' [-Warray-bounds=] 623 | flow_info->l2_data.base_flow = entry; | ^~ Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Mark Lee <Mark-MC.Lee@mediatek.com> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230127223853.never.014-kees@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: Remove C45 check in C22 only MDIO bus driversAndrew Lunn2023-01-211-6/+0
| | | | | | | | | | | | | | | | | | | | The MDIO core should not pass a C45 request via the C22 API call any more. So remove the tests from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: Remove probe_capabilitiesAndrew Lunn2023-01-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Deciding if to probe of PHYs using C45 is now determine by if the bus provides the C45 read method. This makes probe_capabilities redundant so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: ethernet: mtk_wed: add reset/reset_complete callbacksLorenzo Bianconi2023-01-173-0/+58
| | | | | | | | | | | | | | | | | | | | | | Introduce reset and reset_complete wlan callback to schedule WLAN driver reset when ethernet/wed driver is resetting. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: ethernet: mtk_eth_soc: add dma checks to mtk_hw_reset_checkLorenzo Bianconi2023-01-172-0/+132
| | | | | | | | | | | | | | | | | | | | | | Introduce mtk_hw_check_dma_hang routine to monitor possible dma hangs. Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: ethernet: mtk_eth_soc: align reset procedure to vendor sdkLorenzo Bianconi2023-01-175-23/+115
| | | | | | | | | | | | | | | | | | | | | | | | Avoid to power-down the ethernet chip during hw reset and align reset procedure to vendor sdk. Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: ethernet: mtk_eth_soc: introduce mtk_hw_warm_reset supportLorenzo Bianconi2023-01-171-4/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | Introduce mtk_hw_warm_reset utility routine. This is a preliminary patch to align reset procedure to vendor sdk and avoid to power down the chip during hw reset. Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: ethernet: mtk_eth_soc: introduce mtk_hw_reset utility routineLorenzo Bianconi2023-01-171-14/+22
| | | | | | | | | | | | | | | | | | | | | | | | This is a preliminary patch to add Wireless Ethernet Dispatcher reset support. Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 23:38:27 +0100