summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/sfc/siena.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* sfc: return errors from efx_mcdi_set_id_led, and de-indirectEdward Cree2020-08-311-1/+0
| | | | | | | | | | | | W=1 warnings indicated that 'rc' was unused in efx_mcdi_set_id_led(); change the function to return int instead of void and plumb the rc through the caller efx_ethtool_phys_id(). Since (post-Falcon) all sfc NICs use MCDI for this, there's no point in indirecting through a nic_type method, so remove that and just call efx_mcdi_set_id_led() directly. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: skeleton EF100 PF driverEdward Cree2020-07-271-0/+3
| | | | | | | | | | | | | | | | No TX or RX path, no MCDI, not even an ifup/down handler. Besides stubs, the bulk of the patch deals with reading the Xilinx extended PCIe capability, which tells us where to find our BAR. Though in the same module, EF100 has its own struct pci_driver, which is named sfc_ef100. A small number of additional nic_type methods are added; those in the TX (tx_enqueue) and RX (rx_packet) paths are called through indirect call wrappers to minimise the performance impact. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: assign TXQs without gapsEdward Cree2020-07-021-1/+1
| | | | | | | | | | | | | | | | | | Since we only allocate VIs for the number of TXQs we actually need, we cannot naively use "channel * TXQ_TYPES + txq" for the TXQ number, as this has gaps (when efx->tx_queues_per_channel < EFX_TXQ_TYPES) and thus overruns the driver's VI allocations, causing the firmware to reject the MC_CMD_INIT_TXQ based on INSTANCE. Thus, we distinguish INSTANCE (stored in tx_queue->queue) from LABEL (tx_queue->label); the former is allocated starting from 0 in efx_set_channels(), while the latter is simply the txq type (index in channel->tx_queue array). To simplify things, rather than changing tx_queues_per_channel after setting up TXQs, make Siena always probe its HIGHPRI queues at start of day, rather than deferring it until tc mqprio enables them. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: make tx_queues_per_channel variable at runtimeEdward Cree2020-07-021-0/+1
| | | | | | | | | | | Siena needs four TX queues (csum * highpri), EF10 needs two (csum), and EF100 only needs one (as checksumming is controlled entirely by the transmit descriptor). Rather than having various bits of ad-hoc code to decide which queues to set up etc., put the knowledge of how many TXQs a channel has in one place. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: remove max_interrupt_modeEdward Cree2020-07-021-1/+0
| | | | | | | | | | | All NICs supported by this driver are capable of MSI-X interrupts (only Falcon A1 wasn't, and that's now hived off into its own driver), so no need for a nic-type parameter. Besides, the code that checked it was buggy anyway (the following assignment that checked min_interrupt_mode overrode it). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: support setting MTU even if not privileged to configure MAC fullyEdward Cree2020-07-021-1/+1
| | | | | | | | | | | Unprivileged functions (such as VFs) may set their MTU by use of the 'control' field of MC_CMD_SET_MAC_EXT, as used in efx_mcdi_set_mtu(). If calling efx_ef10_mac_reconfigure() from efx_change_mtu(), and the NIC supports the above (SET_MAC_ENHANCED capability), use it rather than efx_mcdi_set_mac(). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: move NIC-specific mcdi_port declarations out of common headerEdward Cree2020-06-301-0/+1
| | | | | | | | | These functions are implemented in mcdi_port.c, which will not be linked into the EF100 driver; thus their prototypes should not be visible in common header files. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: don't try to create more channels than we can have VIsEdward Cree2020-06-301-0/+1
| | | | | | | | | Calculate efx->max_vis at probe time, and check against it in efx_allocate_msix_channels() when considering whether to create XDP TX channels. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: siena_check_caps() can be staticEdward Cree2020-05-121-2/+2
| | | | | | | Reported-by: Jakub Kicinski <kuba@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: actually wire up siena_check_caps()Edward Cree2020-05-121-0/+1
| | | | | | | | Assign it to siena_a0_nic_type.check_caps function pointer. Fixes: be904b855200 ("sfc: make capability checking a nic_type function") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: make capability checking a nic_type functionTom Zhao2020-05-111-0/+7
| | | | | | | | | | | | | Various MCDI functions (especially in filter handling) need to check the datapath caps, but those live in nic_data (since they don't exist on Siena). Decouple from ef10-specific data structures by adding check_caps to the nic_type, to allow using these functions from non-ef10 drivers. Also add a convenience macro efx_has_cap() to reduce the amount of boilerplate involved in calling it. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: move various functionsAlex Maftei (amaftei)2020-01-101-0/+1
| | | | | Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: add new headers in preparation for code splitAlex Maftei (amaftei)2020-01-081-0/+1
| | | | | | | | | | New headers contain prototypes of functions that will be common between ef10 and upcoming driver. Removed static modifier from the affected functions. Some function prototypes were removed from existing headers. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2019-06-191-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sfc: replace asynchronous filter operationsEdward Cree2018-03-271-1/+0
| | | | | | | | | | | | | | | | | | | Instead of having an efx->type->filter_rfs_insert() method, just use workitems with a worker function that calls efx->type->filter_insert(). The only user of this is efx_filter_rfs(), which now queues a call to efx_filter_rfs_work(). Similarly, efx_filter_rfs_expire() is now a worker function called on a new channel->filter_work work_struct, so the method efx->type->filter_rfs_expire_one() is no longer called in atomic context. We also add a new mutex efx->rps_mutex to protect the RPS state (efx-> rps_expire_channel, efx->rps_expire_index, and channel->rps_flow_id) so that the taking of efx->filter_lock can be moved to efx->type->filter_rfs_expire_one(). Thus, all filter table functions are now called in a sleepable context, allowing them to use sleeping locks in a future patch. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: support RSS spreading of ethtool ntuple filtersEdward Cree2018-03-091-13/+13
| | | | | | | | Use a linked list to associate user-facing context IDs with FW-facing context IDs (since the latter can change after an MC reset). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: support variable number of MAC statsEdward Cree2017-12-211-1/+1
| | | | | | | | | | | | | | Medford2 NICs support more than MC_CMD_MAC_NSTATS stats, and report the new count in a field of MC_CMD_GET_CAPABILITIES_V4. This also means that the end generation count moves (it is, as before, the last 64 bits of the DMA buffer, but that is no longer MC_CMD_MAC_GENERATION_END). So read num_mac_stats from the GET_CAPABILITIES response, if present; otherwise assume MC_CMD_MAC_NSTATS; and always use num_mac_stats - 1 rather than MC_CMD_MAC_GENERATION_END. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: make mem_bar a function rather than a constantEdward Cree2017-12-181-1/+9
| | | | | | | | Support using BAR 0 on SFC9250, even though the driver doesn't bind to such devices yet. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: MSI-X is the only interrupt mode for EF10 VFsAndrew Rybchenko2017-02-141-0/+1
| | | | | | | | Add min_interrupt_mode specification per NIC type. It is a bit confusing because of "highest interrupt mode is less capable". Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: configure UDP tunnel offload portsJon Cooper2017-02-091-0/+2
| | | | | | | | | | | Implement ndo_udp_tunnel_{add,del} to update the NIC's list of VXLAN and GENEVE UDP ports. Also reset the port list to empty on driver load and on driver unload, with appropriate flag set on the unload case. These port numbers are used for RX inner checksum offload, and in future will also be used for TX inner checksum offload and encapsulated TSO. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: read back RX hash config from the NIC when querying it with ethtool -xEdward Cree2017-01-171-0/+20
| | | | | | | | Ensures that we report the key and indirection table the NIC is using, rather than (if setting them failed earlier) what we wanted it to use. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: support setting RSS hash key through ethtool APIEdward Cree2017-01-171-2/+5
| | | | | Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: allow PIO more oftenEdward Cree2017-01-161-0/+1
| | | | | | | | | | | | | | | | | | | If an option descriptor has been sent on a queue but not followed by a packet, there will have been no completion event, so the read and write counts won't match and we'll think we can't do PIO. This combines with the fact that we have two TX queues (for en/disable checksum offload), and that both must be empty for PIO to happen. This patch adds a separate "packet_write_count" that tracks the most recent write_count we expect to see a completion event for; this excludes option descriptors but _includes_ PIO descriptors (even though they look like option descriptors). This is then used, rather than write_count, in efx_nic_tx_is_empty(). We only bother to maintain packet_write_count on EF10, since on Siena (a) there are no option descriptors and it always equals write_count, and (b) there's no PIO, so we don't need it anyway. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: don't report RX hash keys to ethtool when RSS wasn't enabledEdward Cree2017-01-041-0/+1
| | | | | | | | | | | If we failed to set up RSS on EF10 (e.g. because firmware declared RX_RSS_LIMITED), ethtool --show-nfc $dev rx-flow-hash ... should report no fields, rather than confusingly reporting what fields we _would_ be hashing on if RSS was working. Fixes: dcb4123cbec0 ("sfc: disable RSS when unsupported") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: remove EFX_BUG_ON_PARANOID, use EFX_WARN_ON_[ONCE_]PARANOID insteadEdward Cree2016-12-031-1/+1
| | | | | | | | | | | | Logically, EFX_BUG_ON_PARANOID can never be correct. For, BUG_ON should only be used if it is not possible to continue without potential harm; and since the non-DEBUG driver will continue regardless (as the BUG_ON is compiled out), clearly the BUG_ON cannot be needed in the DEBUG driver. So, replace every EFX_BUG_ON_PARANOID with either an EFX_WARN_ON_PARANOID or the newly defined EFX_WARN_ON_ONCE_PARANOID. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driverEdward Cree2016-11-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rationale: The differences between Falcon and Siena are in many ways larger than those between Siena and EF10 (despite Siena being nominally "Falcon- architecture"); for instance, Falcon has no MCPU, so there is no MCDI. Removing Falcon support from the sfc driver should simplify the latter, and avoid the possibility of Falcon support being broken by changes to sfc (which are rarely if ever tested on Falcon, it being end-of-lifed hardware). The sfc-falcon driver created in this changeset is essentially a copy of the sfc driver, but with Siena- and EF10-specific code, including MCDI, removed and with the "efx_" identifier prefix changed to "ef4_" (for "EFX 4000- series") to avoid collisions when both drivers are built-in. This changeset removes Falcon from the sfc driver's PCI ID table; then in sfc I've removed obvious Falcon-related code: I removed the Falcon NIC functions, Falcon PHY code, and EFX_REV_FALCON_*, then fixed up everything that referenced them. Also, increment minor version of both drivers (to 4.1). For now, CONFIG_SFC selects CONFIG_SFC_FALCON, so that updating old configs doesn't cause Falcon support to disappear; but that should be undone at some point in the future. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Firmware-Assisted TSO version 2Bert Kenward2016-11-181-0/+1
| | | | | | | | | | | | | | | | Add support for FATSOv2 to the driver. FATSOv2 offloads far more of the task of TCP segmentation to the firmware, such that we now just pass a single super-packet to the NIC. This means TSO has a great deal in common with a normal DMA transmit, apart from adding a couple of option descriptors. NIC-specific checks have been moved off the fast path and in to initialisation where possible. This also moves FATSOv1/SWTSO to a new file (tx_tso.c). The end of transmit and some error handling is now outside TSO, since it is common with other code. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: get timer configuration from adapterBert Kenward2016-08-131-0/+3
| | | | | | | | | On SFN8000 series adapters the MC provides a method to get the timer quantum and the maximum timer setting. We revert to the old values if the new call is unavailable. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: set interrupt moderation via MCDIBert Kenward2016-08-131-3/+8
| | | | | | | | | | | SFN8000-series NICs require a new method of setting interrupt moderation, via MCDI. This is indicated by a workaround flag. This new MCDI command takes an explicit time value rather than a number of ticks. It therefore makes sense to also store the moderation values in terms of time, since that is what the ethtool interface is interested in. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Allow driver to cope with a lower number of VIs than it needs for RSSShradha Shah2015-08-281-0/+1
| | | | | | | | | | | | | | | | | | | | | Previously, the driver would refuse to load if it couldn't secure enough VIs from the MC to fulfill its RSS requirements. This was causing probe to fail on later functions in configurations where we'd run out of VIs, such as having many VFs. This change allows the driver to load with fewer VIs, down to a minimum of 2. A warning will be printed saying that RSS requirements were not met, possibly affecting performance. efx->max_tx_channels needs to be set to avoid going down the failure path in efx_probe_nic() immediately in the loop after the probe() NIC-type function. Also, Set rc=ENOSPC when bombing out of efx_probe_nic due to lack of VIs. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* siena: only report generic filters in get_ts_infoJacob Keller2015-07-181-5/+1
| | | | | | | | CC: Solarflare linux maintainers <linux-net-drivers@solarflare.com> CC: Shradha Shah <sshah@solarflare.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* sfc: set the MAC address using MC_CMD_VADAPTOR_SET_MACShradha Shah2015-05-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a set_mac_address() NIC-type function for EF10 only, and use this to set the MAC address on the vadaptor. For Siena and earlier, the MAC address continues to be set by MC_CMD_SET_MAC; this is still called on EF10, and including a MAC address in this command has no effect. The sriov_mac_address_changed() NIC-type function is no longer needed on EF10, but it is needed for Siena where it is used to update the peer address of the PF for VFDI. Change this to use the new set_mac_address function pointer. efx_ef10_sriov_mac_address_changed() is no longer called, as VFs will try to change the MAC address on their vadaptor rather than trying to change to the context of the PF to alter the vport. When a VF is running in direct passthrough mode with MAC spoofing enabled, it will be able to change the MAC address on its vadaptor. In this case, there is a link to the PF, so find the correct VF in its ef10_vf array and update the MAC address. ndo_set_mac_address() can be called during driver unload while bonding, and in this case the device has already been stopped, so don't call efx_net_open() to restart it after reconfiguration. efx->port_enabled is set to false in efx_stop_port(), so it is indicator of whether the device needs to be restarted. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Bind the sfc driver to any available VF'sShradha Shah2015-05-091-0/+1
| | | | | | | | | | | | Add the device ID of the VF to the PCI device ID table. Added a boolean flag is_vf in efx_nic_type to differentiate between a VF and PF at probe time. This flag is useful in later patches while setting MAC address specially in the PCI-passthrough case. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Add use of shared RSS contexts.Jon Cooper2015-05-091-2/+7
| | | | | | | | | | | | | | | | Allow PFs to allocate shared RSS contexts if we exhaust our exclusive RSS contexts. Make VFs use shared RSS contexts in all cases. Spruce up error handling so that the shadow copy of the RSS table is updated after successful update, rather than in all cases, so that we report the actual contents of the RSS table after a failure to set it, rather than what we'd like it to be. Populate context_size parameter when vacuously allocating RSS context of size 1. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Prepare to bind the sfc driver to the VF.Shradha Shah2015-05-091-0/+1
| | | | | | | | | Added efx_nic_type structure for VF. Mapped a different BAR for VF as it uses BAR 0 for memory. Added functions sriov_init and sriov_fini. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: create VEB vswitch and vport above default firmware setupDaniel Pieczko2015-05-091-0/+3
| | | | | | | | | | | | | | | | | | | | Adds functions to allocate and free vswitches and vports; vadaptors are automatically allocated and freed when TX/RX queues are initialised and finalised. This vswitching structure is only created if the firmware supports it, so a check that full-featured firmware is running is performed first. If the MC resets, the vswitching infrastructure will need to be recreated, so mark the "must_probe_vswitching" flag when an MC reboot is detected. Don't try to create a vswitch if vf-count=0 This allocation of vswitches and vports does not currently support configuring VLAN tags, but that can be added in a future change. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Enable VF's via a write to the sysfs file sriov_numvfsShradha Shah2015-05-091-0/+1
| | | | | | | | This patch adds support for the use of sriov_configure on EF10 to enable Virtual Functions while the driver is loaded. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Own header for nic-specific sriov functions, single instance of ↵Shradha Shah2015-05-091-0/+10
| | | | | | | | | | | | | | | | | | | netdev_ops and sriov removed from Falcon code By putting all the efx_{siena,ef10}_sriov_* declarations in {siena,ef10}_sriov.h, ensure they cannot be called from nic-generic code. Also fixes up an instance of this, where mcdi.c was calling efx_siena_sriov_flr. The single instance of netdev_ops should call general high level functions that can then call something adapter specific in efx_nic_type. We should only do adapter specialisation via efx_nic_type. Removal of sriov functionality from the Falcon code means that tests are needed for the presence of some callbacks. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ethernet/sfc: Don't use of_node_to_eeh_dev()Benjamin Herrenschmidt2015-03-241-2/+1
| | | | | | | | | This is deprecated, it forces the driver to hop via the OF node that may or may not exist, instead use pci_dev_to_eeh_dev() which is simpler. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Shradha Shah <sshah@solarflare.com>
* sfc: Add NIC type operations to replace direct calls from efx.c into ↵Shradha Shah2014-11-061-0/+5
| | | | | | | | | siena_sriov.c Also add dummy functions where required to avoid NULL pointer dereference. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Rename implementations in siena_sriov.c to have a 'siena' prefixShradha Shah2014-11-061-1/+1
| | | | | | | Patch in preparation for the upcoming EF10 sriov support. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Move the current VF state from efx_nic into siena_nic_dataShradha Shah2014-11-061-0/+1
| | | | | | | | | | | This patch series provides a base and cleanup for the upcoming EF10 SRIOV support. This patch moves the VF state into siena_nic_data as a basis to save the VF state based on nic type. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: add extra RX drop counters for nodesc_trunc and noskb_dropEdward Cree2014-07-161-1/+8
| | | | | | | | | Added a counter rx_noskb_drop for failure to allocate an skb. Summed the per-channel rx_nodesc_trunc counters earlier so that they can be included in rx_dropped. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast)Edward Cree2014-04-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an MCDI command times out (whether or not we find it completed when we poll), call efx_mcdi_abandon(), which tells all subsequent MCDI calls to fail-fast, and queues up an FLR. Because an FLR doesn't lead to receiving any reboot even from the MC (unlike most other types of reset), we have to call efx_ef10_reset_mc_allocations. In efx_start_all(), if a reset (of any kind) is pending, we bail out. Without this, attempts to reconfigure (e.g. change mtu) can cause driver/mc state inconsistency if the first MCDI call triggers an FLR. For similar reasons, on EF10, in efx_reset_down(method=RESET_TYPE_MCDI_TIMEOUT), set the number of active queues to zero before calling efx_stop_all(). And, on farch, in efx_reset_up(method=RESET_TYPE_MCDI_TIMEOUT), set active_queues and flushes pending & outstanding to zero. efx_mcdi_mode_{poll,event}() should not take us out of fail-fast mode. Instead, this is done by efx_mcdi_reset() after the FLR completes. The new FLR reset_type RESET_TYPE_MCDI_TIMEOUT doesn't really fit into the hierarchy of reset 'scopes' whereby efx_reset() decides some resets subsume others. Thus, it uses separate logic. Also, fixed up some inconsistency around RESET_TYPE_MC_BIST, which was in the wrong place in that hierarchy. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sfc: Change efx_nic_type::rx_push_indir_table to push hash key as wellAndrew Rybchenko2013-12-121-18/+27
| | | | | | | | The EF10 implementation already does this, and it makes more logical sense to group the RSS hash key and indirection table together. Rename the operation to rx_push_rss_config. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
* sfc: split setup of hardware timestamping into NIC-type operationDaniel Pieczko2013-12-121-13/+56
| | | | | | | | | I added efx_ptp_get_mode() to avoid moving the definition for efx_ptp_data, since the current PTP mode is needed for siena.c:siena_set_ptp_hwtstamp. [bwh: Also move the rx_filters mask, and add kernel-doc] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
* sfc: Remove dependency of PTP on having a dedicated channelBen Hutchings2013-12-121-1/+1
| | | | | | | | | | | We need a dedicated channel on Siena to ensure we can match up the separate RX and timestamp events for each PTP packet. We won't do this for EF10 as timestamps are delivered inline. Pass a channel index of 0 to MC_CMD_PTP_OP_ENABLE when there is no dedicated channel. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
* sfc: Correct RX dropped count for drops while interface is downJon Cooper2013-12-121-0/+3
| | | | | | | | | | | | | | We don't directly control RX ingress on Siena or any later controllers, and so we cannot prevent packets from entering the RX datapath while the RX queues are not set up. This results in the hardware incrementing RX_NODESC_DROP_CNT, but it's not an error and we should not include it in error stats. When bringing an interface up or down, pull (or wait for) stats and count the number of packets that were dropped while the interface was down. Subtract this from the reported RX dropped count. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
* sfc: Update copyright bannersBen Hutchings2013-08-301-2/+2
| | | | | | | Update the dates for files that have been added to in 2012-2013. Drop the 'Solarstorm' brand name that's still lingering here. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
* sfc: Make efx_mcdi_{init,fini}() call efx_mcdi_drv_attach()Ben Hutchings2013-08-291-20/+1
| | | | | | This should be done during MCDI initialisation for any NIC. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-31 18:31:16 +0100