summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/synopsys (follow)
Commit message (Collapse)AuthorAgeFilesLines
* dwc_eth_qos: enable flow control by defaultNiklas Cassel2016-10-181-0/+1
| | | | | | | | | | Allow autoneg to enable flow control by default. The behavior when autoneg is off has not changed. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Jesper Nilsson <jespern@axis.com> Acked-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: do not clear pause flags from phy_device->supportedNiklas Cassel2016-10-181-1/+2
| | | | | | | | | | | | | | | phy_device->supported is originally set by the PHY driver. The ethernet driver should filter phy_device->supported to only contain flags supported by the IP. The IP supports setting rx and tx flow control independently, therefore SUPPORTED_Pause and SUPPORTED_Asym_Pause should not be cleared. If the flags are cleared, pause frames cannot be enabled (even if they are supported by the PHY). Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Jesper Nilsson <jespern@axis.com> Acked-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: constify net_device_ops structuresJulia Lawall2016-09-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 21623 1316 40 22979 59c3 drivers/net/ethernet/synopsys/dwc_eth_qos.o and after the change it is: text data bss dec hex filename 22199 724 40 22963 59b3 drivers/net/ethernet/synopsys/dwc_eth_qos.o Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-09-131-20/+18
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: David S. Miller <davem@davemloft.net>
| * dwc_eth_qos: do not register semi-initialized deviceLars Persson2016-09-101-20/+18
| | | | | | | | | | | | | | | | | | | | We move register_netdev() to the end of dwceqos_probe() to close any races where the netdev callbacks are called before the initialization has finished. Reported-by: Pavel Andrianov <andrianov@ispras.ru> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dwc_eth_qos: constify ethtool_ops structuresJulia Lawall2016-08-311-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: fix interrupt enable raceRabin Vincent2016-08-241-7/+10
| | | | | | | | | | | | | We currently enable interrupts before we enable NAPI. If an RX interrupt hits before we enabled NAPI then the NAPI callback is never called and we leave the hardware with RX interrupts disabled, which of course leads us to never handling received packets. Fix this by moving the interrupt enable to after we've enable NAPI and the reclaim tasklet. Fixes: cd5e41234729 ("dwc_eth_qos: do phy_start before resetting hardware") Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar2016-07-181-1/+2
| | | | | | | | | | | | | | | | | alloc_workqueue replaces deprecated create_singlethread_workqueue(). A dedicated workqueue has been used since the workitem viz lp->txtimeout_reinit is involved in reinitialization if a TX timeout occurs, which is necessary to guarantee forward progress in packet processing. As a network device can be used during memory reclaim, the workqueue needs forward progress guarantee under memory pressure. WQ_MEM_RECLAIM has been set to ensure this. Since there is only a single work item, explicit concurrency limit is unnecessary here. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: fix missing clk_disable_unprepare() on error in dwceqos_probe()Wei Yongjun2016-07-121-1/+1
| | | | | | | | | Fix missing clk_disable_unprepare() call before return from dwceqos_probe() in the error handling case of invalid fixed-link. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: remove unused including <linux/version.h>Wei Yongjun2016-07-051-1/+0
| | | | | | | Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: dwc_eth_qos: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes2016-06-281-24/+2
| | | | | | | | There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: dwc_eth_qos: use phydev from struct net_devicePhilippe Reynes2016-06-281-24/+23
| | | | | | | | | | The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: replace dev->trans_start update with helperFlorian Westphal2016-05-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: do phy_start before resetting hardwareLars Persson2016-03-021-3/+20
| | | | | | | | | | | | | | | | This reverts the changed init order from commit 3647bc35bd42 ("dwc_eth_qos: Reset hardware before PHY start") and makes another fix for the race. It turned out that the reset state machine of the dwceqos hardware requires PHY clocks to be present in order to complete the reset cycle. To plug the race with the phy state machine we defer link speed setting until the hardware init has finished. Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: use DWCEQOS_MSG_DEFAULTRabin Vincent2016-03-021-1/+1
| | | | | | | | | | | Since debug is hardcoded to 3, the defaults in the DWCEQOS_MSG_DEFAULT macro are never used, which does not seem to be the intended behaviour here. Set debug to -1 like other drivers so that DWCEQOS_MSG_DEFAULT is actually used by default. Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: use GFP_KERNEL in dma_alloc_coherent()Rabin Vincent2016-03-021-2/+2
| | | | | | | | | Since we are in non-atomic context here we can pass GFP_KERNEL to dma_alloc_coherent(). This enables use of the CMA. Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: release descriptors outside netif_tx_lockLars Persson2016-03-021-4/+6
| | | | | | | | | | | | To prepare for using the CMA, we can not be in atomic context when de-allocating DMA buffers. The tx lock was needed only to protect the hw reset against the xmit handler. Now we briefly grab the tx lock while stopping the queue to make sure no thread is inside or will enter the xmit handler. Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: fix race condition in dwceqos_start_xmitRabin Vincent2016-03-021-4/+2
| | | | | | | | | | The xmit handler and the tx_reclaim tasklet had a race on the tx_free variable which could lead to a tx timeout if tx_free was updated after the tx complete interrupt. Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: Reset hardware before PHY startRabin Vincent2016-02-061-1/+1
| | | | | | | | | | The hardware reset is currently done after phy_start() is called, leading to a race where we can lose the link status if the phy state machine calls dwceqos_adjust_link() before we reset the MAC registers. Acked-by: Lars Persson <larper@axis.com> Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: Fix dma address for multi-fragment skbsLars Persson2016-01-121-1/+1
| | | | | | | | | The offset inside the fragment was not used for the dma address and silent data corruption resulted because TSO makes the checksum match. Fixes: 077742dac2c7 ("dwc_eth_qos: Add support for Synopsys DWC Ethernet QoS") Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mdio: Move allocation of interrupts into coreAndrew Lunn2016-01-071-13/+2
| | | | | | | | | | Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Centralise print about attached phyAndrew Lunn2016-01-071-11/+1
| | | | | | | | | | Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put"Markus Elfring2015-11-071-2/+1
| | | | | | | | | | | The of_node_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet: synopsys: SYNOPSYS_DWC_ETH_QOS should depend on HAS_DMAGeert Uytterhoeven2015-09-071-1/+1
| | | | | | | | | | | | | | | If NO_DMA=y: ERROR: "dma_alloc_coherent" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined! ERROR: "dma_free_coherent" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined! ERROR: "dma_map_page" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined! ERROR: "dma_mapping_error" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined! ERROR: "dma_map_single" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dwc_eth_qos: Add support for Synopsys DWC Ethernet QoSLars Persson2015-07-293-0/+3051
This patch adds a platform driver for the new generation of the gigabit ethernet IP from Synopsys. It is developed for version 4.10a of the IP core. Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 09:22:55 +0100