summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error pathWentao Liang2024-11-071-0/+1
| | | | | | | | | | | | | | | | The ionic_setup_one() creates a debugfs entry for ionic upon successful execution. However, the ionic_probe() does not release the dentry before returning, resulting in a memory leak. To fix this bug, we add the ionic_debugfs_del_dev() to release the resources in a timely manner before returning. Fixes: 0de38d9f1dba ("ionic: extract common bits from ionic_probe") Signed-off-by: Wentao Liang <Wentao_liang_g@163.com> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20241107021756.1677-1-liangwentao@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: arc: rockchip: fix emac mdio node supportJohan Jonker2024-11-071-1/+8
| | | | | | | | | | | | | | | | | | The binding emac_rockchip.txt is converted to YAML. Changed against the original binding is an added MDIO subnode. This make the driver failed to find the PHY, and given the 'mdio has invalid PHY address' it is probably looking in the wrong node. Fix emac_mdio.c so that it can handle both old and new device trees. Fixes: 1dabb74971b3 ("ARM: dts: rockchip: restyle emac nodes") Signed-off-by: Johan Jonker <jbx6244@gmail.com> Tested-by: Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: arc: fix the device for dma_map_single/dma_unmap_singleJohan Jonker2024-11-071-11/+16
| | | | | | | | | | | | | | | | The ndev->dev and pdev->dev aren't the same device, use ndev->dev.parent which has dma_mask, ndev->dev.parent is just pdev->dev. Or it would cause the following issue: [ 39.933526] ------------[ cut here ]------------ [ 39.938414] WARNING: CPU: 1 PID: 501 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x90/0x1f8 Fixes: f959dcd6ddfd ("dma-direct: Fix potential NULL pointer dereference") Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: stmmac: Fix unbalanced IRQ wake disable warning on single irq caseNícolas F. R. A. Prado2024-11-071-0/+1
| | | | | | | | | | | | | | | | | | | | | Commit a23aa0404218 ("net: stmmac: ethtool: Fixed calltrace caused by unbalanced disable_irq_wake calls") introduced checks to prevent unbalanced enable and disable IRQ wake calls. However it only initialized the auxiliary variable on one of the paths, stmmac_request_irq_multi_msi(), missing the other, stmmac_request_irq_single(). Add the same initialization on stmmac_request_irq_single() to prevent "Unbalanced IRQ <x> wake disable" warnings from being printed the first time disable_irq_wake() is called on platforms that run on that code path. Fixes: a23aa0404218 ("net: stmmac: ethtool: Fixed calltrace caused by unbalanced disable_irq_wake calls") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241101-stmmac-unbalanced-wake-single-fix-v1-1-5952524c97f0@collabora.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: vertexcom: mse102x: Fix possible double free of TX skbStefan Wahren2024-11-071-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The scope of the TX skb is wider than just mse102x_tx_frame_spi(), so in case the TX skb room needs to be expanded, we should free the the temporary skb instead of the original skb. Otherwise the original TX skb pointer would be freed again in mse102x_tx_work(), which leads to crashes: Internal error: Oops: 0000000096000004 [#2] PREEMPT SMP CPU: 0 PID: 712 Comm: kworker/0:1 Tainted: G D 6.6.23 Hardware name: chargebyte Charge SOM DC-ONE (DT) Workqueue: events mse102x_tx_work [mse102x] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_release_data+0xb8/0x1d8 lr : skb_release_data+0x1ac/0x1d8 sp : ffff8000819a3cc0 x29: ffff8000819a3cc0 x28: ffff0000046daa60 x27: ffff0000057f2dc0 x26: ffff000005386c00 x25: 0000000000000002 x24: 00000000ffffffff x23: 0000000000000000 x22: 0000000000000001 x21: ffff0000057f2e50 x20: 0000000000000006 x19: 0000000000000000 x18: ffff00003fdacfcc x17: e69ad452d0c49def x16: 84a005feff870102 x15: 0000000000000000 x14: 000000000000024a x13: 0000000000000002 x12: 0000000000000000 x11: 0000000000000400 x10: 0000000000000930 x9 : ffff00003fd913e8 x8 : fffffc00001bc008 x7 : 0000000000000000 x6 : 0000000000000008 x5 : ffff00003fd91340 x4 : 0000000000000000 x3 : 0000000000000009 x2 : 00000000fffffffe x1 : 0000000000000000 x0 : 0000000000000000 Call trace: skb_release_data+0xb8/0x1d8 kfree_skb_reason+0x48/0xb0 mse102x_tx_work+0x164/0x35c [mse102x] process_one_work+0x138/0x260 worker_thread+0x32c/0x438 kthread+0x118/0x11c ret_from_fork+0x10/0x20 Code: aa1303e0 97fffab6 72001c1f 54000141 (f9400660) Cc: stable@vger.kernel.org Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20241105163101.33216-1-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge branch '100GbE' of ↵Jakub Kicinski2024-11-0611-32/+32
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-11-04 (ice, idpf, i40e, e1000e) For ice: Marcin adjusts ordering of calls in ice_eswitch_detach() to resolve a use after free issue. Mateusz corrects variable type for Flow Director queue to fix issues related to drop actions. For idpf: Pavan resolves issues related to reset on idpf; avoiding use of freed vport and correctly unrolling the mailbox task. For i40e: Aleksandr fixes a race condition involving addition and deletion of VF MAC filters. For e1000e: Vitaly reverts workaround for Meteor Lake causing regressions in power management flows. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Remove Meteor Lake SMBUS workarounds i40e: fix race condition by adding filter's intermediate sync state idpf: fix idpf_vc_core_init error path idpf: avoid vport access in idpf_get_link_ksettings ice: change q_index variable type to s16 to store -1 value ice: Fix use after free during unload with ports in bridge ==================== Link: https://patch.msgid.link/20241104223639.2801097-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * e1000e: Remove Meteor Lake SMBUS workaroundsVitaly Lifshits2024-11-041-13/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a partial revert to commit 76a0a3f9cc2f ("e1000e: fix force smbus during suspend flow"). That commit fixed a sporadic PHY access issue but introduced a regression in runtime suspend flows. The original issue on Meteor Lake systems was rare in terms of the reproduction rate and the number of the systems affected. After the integration of commit 0a6ad4d9e169 ("e1000e: avoid failing the system during pm_suspend"), PHY access loss can no longer cause a system-level suspend failure. As it only occurs when the LAN cable is disconnected, and is recovered during system resume flow. Therefore, its functional impact is low, and the priority is given to stabilizing runtime suspend. Fixes: 76a0a3f9cc2f ("e1000e: fix force smbus during suspend flow") Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * i40e: fix race condition by adding filter's intermediate sync stateAleksandr Loktionov2024-11-043-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a race condition in the i40e driver that leads to MAC/VLAN filters becoming corrupted and leaking. Address the issue that occurs under heavy load when multiple threads are concurrently modifying MAC/VLAN filters by setting mac and port VLAN. 1. Thread T0 allocates a filter in i40e_add_filter() within i40e_ndo_set_vf_port_vlan(). 2. Thread T1 concurrently frees the filter in __i40e_del_filter() within i40e_ndo_set_vf_mac(). 3. Subsequently, i40e_service_task() calls i40e_sync_vsi_filters(), which refers to the already freed filter memory, causing corruption. Reproduction steps: 1. Spawn multiple VFs. 2. Apply a concurrent heavy load by running parallel operations to change MAC addresses on the VFs and change port VLANs on the host. 3. Observe errors in dmesg: "Error I40E_AQ_RC_ENOSPC adding RX filters on VF XX, please set promiscuous on manually for VF XX". Exact code for stable reproduction Intel can't open-source now. The fix involves implementing a new intermediate filter state, I40E_FILTER_NEW_SYNC, for the time when a filter is on a tmp_add_list. These filters cannot be deleted from the hash list directly but must be removed using the full process. Fixes: 278e7d0b9d68 ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * idpf: fix idpf_vc_core_init error pathPavan Kumar Linga2024-11-042-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In an event where the platform running the device control plane is rebooted, reset is detected on the driver. It releases all the resources and waits for the reset to complete. Once the reset is done, it tries to build the resources back. At this time if the device control plane is not yet started, then the driver timeouts on the virtchnl message and retries to establish the mailbox again. In the retry flow, mailbox is deinitialized but the mailbox workqueue is still alive and polling for the mailbox message. This results in accessing the released control queue leading to null-ptr-deref. Fix it by unrolling the work queue cancellation and mailbox deinitialization in the reverse order which they got initialized. Fixes: 4930fbf419a7 ("idpf: add core init and interrupt request") Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager") Cc: stable@vger.kernel.org # 6.9+ Reviewed-by: Tarun K Singh <tarun.k.singh@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * idpf: avoid vport access in idpf_get_link_ksettingsPavan Kumar Linga2024-11-044-13/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the device control plane is removed or the platform running device control plane is rebooted, a reset is detected on the driver. On driver reset, it releases the resources and waits for the reset to complete. If the reset fails, it takes the error path and releases the vport lock. At this time if the monitoring tools tries to access link settings, it call traces for accessing released vport pointer. To avoid it, move link_speed_mbps to netdev_priv structure which removes the dependency on vport pointer and the vport lock in idpf_get_link_ksettings. Also use netif_carrier_ok() to check the link status and adjust the offsetof to use link_up instead of link_speed_mbps. Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks") Cc: stable@vger.kernel.org # 6.7+ Reviewed-by: Tarun K Singh <tarun.k.singh@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: change q_index variable type to s16 to store -1 valueMateusz Polchlopek2024-11-042-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix Flow Director not allowing to re-map traffic to 0th queue when action is configured to drop (and vice versa). The current implementation of ethtool callback in the ice driver forbids change Flow Director action from 0 to -1 and from -1 to 0 with an error, e.g: # ethtool -U eth2 flow-type tcp4 src-ip 1.1.1.1 loc 1 action 0 # ethtool -U eth2 flow-type tcp4 src-ip 1.1.1.1 loc 1 action -1 rmgr: Cannot insert RX class rule: Invalid argument We set the value of `u16 q_index = 0` at the beginning of the function ice_set_fdir_input_set(). In case of "drop traffic" action (which is equal to -1 in ethtool) we store the 0 value. Later, when want to change traffic rule to redirect to queue with index 0 it returns an error caused by duplicate found. Fix this behaviour by change of the type of field `q_index` from u16 to s16 in `struct ice_fdir_fltr`. This allows to store -1 in the field in case of "drop traffic" action. What is more, change the variable type in the function ice_set_fdir_input_set() and assign at the beginning the new `#define ICE_FDIR_NO_QUEUE_IDX` which is -1. Later, if the action is set to another value (point specific queue index) the variable value is overwritten in the function. Fixes: cac2a27cd9ab ("ice: Support IPv4 Flow Director filters") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: Fix use after free during unload with ports in bridgeMarcin Szycik2024-11-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unloading the ice driver while switchdev port representors are added to a bridge can lead to kernel panic. Reproducer: modprobe ice devlink dev eswitch set $PF1_PCI mode switchdev ip link add $BR type bridge ip link set $BR up echo 2 > /sys/class/net/$PF1/device/sriov_numvfs sleep 2 ip link set $PF1 master $BR ip link set $VF1_PR master $BR ip link set $VF2_PR master $BR ip link set $PF1 up ip link set $VF1_PR up ip link set $VF2_PR up ip link set $VF1 up rmmod irdma ice When unloading the driver, ice_eswitch_detach() is eventually called as part of VF freeing. First, it removes a port representor from xarray, then unregister_netdev() is called (via repr->ops.rem()), finally representor is deallocated. The problem comes from the bridge doing its own deinit at the same time. unregister_netdev() triggers a notifier chain, resulting in ice_eswitch_br_port_deinit() being called. It should set repr->br_port = NULL, but this does not happen since repr has already been removed from xarray and is not found. Regardless, it finishes up deallocating br_port. At this point, repr is still not freed and an fdb event can happen, in which ice_eswitch_br_fdb_event_work() takes repr->br_port and tries to use it, which causes a panic (use after free). Note that this only happens with 2 or more port representors added to the bridge, since with only one representor port, the bridge deinit is slightly different (ice_eswitch_br_port_deinit() is called via ice_eswitch_br_ports_flush(), not ice_eswitch_br_port_unlink()). Trace: Oops: general protection fault, probably for non-canonical address 0xf129010fd1a93284: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x8948287e8d499420-0x8948287e8d499427] (...) Workqueue: ice_bridge_wq ice_eswitch_br_fdb_event_work [ice] RIP: 0010:__rht_bucket_nested+0xb4/0x180 (...) Call Trace: (...) ice_eswitch_br_fdb_find+0x3fa/0x550 [ice] ? __pfx_ice_eswitch_br_fdb_find+0x10/0x10 [ice] ice_eswitch_br_fdb_event_work+0x2de/0x1e60 [ice] ? __schedule+0xf60/0x5210 ? mutex_lock+0x91/0xe0 ? __pfx_ice_eswitch_br_fdb_event_work+0x10/0x10 [ice] ? ice_eswitch_br_update_work+0x1f4/0x310 [ice] (...) A workaround is available: brctl setageing $BR 0, which stops the bridge from adding fdb entries altogether. Change the order of operations in ice_eswitch_detach(): move the call to unregister_netdev() before removing repr from xarray. This way repr->br_port will be correctly set to NULL in ice_eswitch_br_port_deinit(), preventing a panic. Fixes: fff292b47ac1 ("ice: add VF representors one by one") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()Roger Quadros2024-11-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | flow->irq is initialized to 0 which is a valid IRQ. Set it to -EINVAL in error path of am65_cpsw_nuss_init_rx_chns() so we do not try to free an unallocated IRQ in am65_cpsw_nuss_remove_rx_chns(). If user tried to change number of RX queues and am65_cpsw_nuss_init_rx_chns() failed due to any reason, the warning will happen if user tries to change the number of RX queues after the error condition. root@am62xx-evm:~# ethtool -L eth0 rx 3 [ 40.385293] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [ 40.393211] am65-cpsw-nuss 8000000.ethernet: Failed to init rx flow2 netlink error: Invalid argument root@am62xx-evm:~# ethtool -L eth0 rx 2 [ 82.306427] ------------[ cut here ]------------ [ 82.311075] WARNING: CPU: 0 PID: 378 at kernel/irq/devres.c:144 devm_free_irq+0x84/0x90 [ 82.469770] Call trace: [ 82.472208] devm_free_irq+0x84/0x90 [ 82.475777] am65_cpsw_nuss_remove_rx_chns+0x6c/0xac [ti_am65_cpsw_nuss] [ 82.482487] am65_cpsw_nuss_update_tx_rx_chns+0x2c/0x9c [ti_am65_cpsw_nuss] [ 82.489442] am65_cpsw_set_channels+0x30/0x4c [ti_am65_cpsw_nuss] [ 82.495531] ethnl_set_channels+0x224/0x2dc [ 82.499713] ethnl_default_set_doit+0xb8/0x1b8 [ 82.504149] genl_family_rcv_msg_doit+0xc0/0x124 [ 82.508757] genl_rcv_msg+0x1f0/0x284 [ 82.512409] netlink_rcv_skb+0x58/0x130 [ 82.516239] genl_rcv+0x38/0x50 [ 82.519374] netlink_unicast+0x1d0/0x2b0 [ 82.523289] netlink_sendmsg+0x180/0x3c4 [ 82.527205] __sys_sendto+0xe4/0x158 [ 82.530779] __arm64_sys_sendto+0x28/0x38 [ 82.534782] invoke_syscall+0x44/0x100 [ 82.538526] el0_svc_common.constprop.0+0xc0/0xe0 [ 82.543221] do_el0_svc+0x1c/0x28 [ 82.546528] el0_svc+0x28/0x98 [ 82.549578] el0t_64_sync_handler+0xc0/0xc4 [ 82.553752] el0t_64_sync+0x190/0x194 [ 82.557407] ---[ end trace 0000000000000000 ]--- Fixes: da70d184a8c3 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx") Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7Roger Quadros2024-11-052-44/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On J7 platforms, setting up multiple RX flows was failing as the RX free descriptor ring 0 is shared among all flows and we did not allocate enough elements in the RX free descriptor ring 0 to accommodate for all RX flows. This issue is not present on AM62 as separate pair of rings are used for free and completion rings for each flow. Fix this by allocating enough elements for RX free descriptor ring 0. However, we can no longer rely on desc_idx (descriptor based offsets) to identify the pages in the respective flows as free descriptor ring includes elements for all flows. To solve this, introduce a new swdata data structure to store flow_id and page. This can be used to identify which flow (page_pool) and page the descriptor belonged to when popped out of the RX rings. Fixes: da70d184a8c3 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: hns3: fix kernel crash when uninstalling driverPeiyang Wang2024-11-051-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the driver is uninstalled and the VF is disabled concurrently, a kernel crash occurs. The reason is that the two actions call function pci_disable_sriov(). The num_VFs is checked to determine whether to release the corresponding resources. During the second calling, num_VFs is not 0 and the resource release function is called. However, the corresponding resource has been released during the first invoking. Therefore, the problem occurs: [15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... [15278.131557][T50670] Call trace: [15278.134686][T50670] klist_put+0x28/0x12c [15278.138682][T50670] klist_del+0x14/0x20 [15278.142592][T50670] device_del+0xbc/0x3c0 [15278.146676][T50670] pci_remove_bus_device+0x84/0x120 [15278.151714][T50670] pci_stop_and_remove_bus_device+0x6c/0x80 [15278.157447][T50670] pci_iov_remove_virtfn+0xb4/0x12c [15278.162485][T50670] sriov_disable+0x50/0x11c [15278.166829][T50670] pci_disable_sriov+0x24/0x30 [15278.171433][T50670] hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3] [15278.178039][T50670] hclge_exit+0x28/0xd0 [hclge] [15278.182730][T50670] __se_sys_delete_module.isra.0+0x164/0x230 [15278.188550][T50670] __arm64_sys_delete_module+0x1c/0x30 [15278.193848][T50670] invoke_syscall+0x50/0x11c [15278.198278][T50670] el0_svc_common.constprop.0+0x158/0x164 [15278.203837][T50670] do_el0_svc+0x34/0xcc [15278.207834][T50670] el0_svc+0x20/0x30 For details, see the following figure. rmmod hclge disable VFs ---------------------------------------------------- hclge_exit() sriov_numvfs_store() ... device_lock() pci_disable_sriov() hns3_pci_sriov_configure() pci_disable_sriov() sriov_disable() sriov_disable() if !num_VFs : if !num_VFs : return; return; sriov_del_vfs() sriov_del_vfs() ... ... klist_put() klist_put() ... ... num_VFs = 0; num_VFs = 0; device_unlock(); In this patch, when driver is removing, we get the device_lock() to protect num_VFs, just like sriov_numvfs_store(). Fixes: 0dd8a25f355b ("net: hns3: disable sriov before unload hclge layer") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241101091507.3644584-1-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"Jakub Kicinski2024-11-059-178/+26
|/ | | | | | | | | | | | | | | | | | | | | This reverts commit d80a3091308491455b6501b1c4b68698c4a7cd24, reversing changes made to 637f41476384c76d3cd7dcf5947caf2c8b8d7a9b: 2cf246143519 ("net: hns3: fix kernel crash when 1588 is sent on HIP08 devices") 3e22b7de34cb ("net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue") d1c2e2961ab4 ("net: hns3: initialize reset_timer before hclgevf_misc_irq_init()") 5f62009ff108 ("net: hns3: don't auto enable misc vector") 2758f18a83ef ("net: hns3: Resolved the issue that the debugfs query result is inconsistent.") 662ecfc46690 ("net: hns3: fix missing features due to dev->features configuration too early") 3e0f7cc887b7 ("net: hns3: fixed reset failure issues caused by the incorrect reset type") f2c14899caba ("net: hns3: add sync command to sync io-pgtable") e6ab19443b36 ("net: hns3: default enable tx bounce buffer when smmu enabled") The series is making the driver poke into IOMMU internals instead of implementing appropriate IOMMU workarounds. Link: https://lore.kernel.org/069c9838-b781-4012-934a-d2626fa78212@arm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: xilinx: axienet: Enqueue Tx packets in dql before dmaengine startsSuraj Gupta2024-11-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enqueue packets in dql after dma engine starts causes race condition. Tx transfer starts once dma engine is started and may execute dql dequeue in completion before it gets queued. It results in following kernel crash while running iperf stress test: kernel BUG at lib/dynamic_queue_limits.c:99! <snip> Internal error: Oops - BUG: 00000000f2000800 [#1] SMP pc : dql_completed+0x238/0x248 lr : dql_completed+0x3c/0x248 Call trace: dql_completed+0x238/0x248 axienet_dma_tx_cb+0xa0/0x170 xilinx_dma_do_tasklet+0xdc/0x290 tasklet_action_common+0xf8/0x11c tasklet_action+0x30/0x3c handle_softirqs+0xf8/0x230 <snip> Start dmaengine after enqueue in dql fixes the crash. Fixes: 6a91b846af85 ("net: axienet: Introduce dmaengine support") Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com> Link: https://patch.msgid.link/20241030062533.2527042-2-suraj.gupta2@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: enetc: allocate vf_state during PF probesWei Fang2024-11-031-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the previous implementation, vf_state is allocated memory only when VF is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before VF is enabled to configure the MAC address of VF. If this is the case, enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null pointer. The simplified error log is as follows. root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89 [ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy [ 173.641973] lr : do_setlink+0x4a8/0xec8 [ 173.732292] Call trace: [ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80 [ 173.738847] __rtnl_newlink+0x530/0x89c [ 173.742692] rtnl_newlink+0x50/0x7c [ 173.746189] rtnetlink_rcv_msg+0x128/0x390 [ 173.750298] netlink_rcv_skb+0x60/0x130 [ 173.754145] rtnetlink_rcv+0x18/0x24 [ 173.757731] netlink_unicast+0x318/0x380 [ 173.761665] netlink_sendmsg+0x17c/0x3c8 Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241031060247.1290941-2-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dpaa_eth: print FD status in CPU endianness in dpaa_eth_fd tracepointVladimir Oltean2024-11-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Sparse warns: note: in included file (through ../include/trace/trace_events.h, ../include/trace/define_trace.h, ../drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h): warning: incorrect type in assignment (different base types) expected unsigned int [usertype] fd_status got restricted __be32 const [usertype] status We take struct qm_fd :: status, store it and print it as an u32, though it is a big endian field. We should print the FD status in CPU endianness for ease of debug and consistency between PowerPC and Arm systems. Though it is a not often used debug feature, it is best to treat it as a bug and backport the format change to all supported stable kernels, for consistency. Fixes: eb11ddf36eb8 ("dpaa_eth: add trace points") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Link: https://patch.msgid.link/20241029163105.44135-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: enetc: set MAC address to the VF net_deviceWei Fang2024-11-011-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The MAC address of VF can be configured through the mailbox mechanism of ENETC, but the previous implementation forgot to set the MAC address in net_device, resulting in the SMAC of the sent frames still being the old MAC address. Since the MAC address in the hardware has been changed, Rx cannot receive frames with the DMAC address as the new MAC address. The most obvious phenomenon is that after changing the MAC address, we can see that the MAC address of eno0vf0 has not changed through the "ifconfig eno0vf0" command and the IP address cannot be obtained . root@ls1028ardb:~# ifconfig eno0vf0 down root@ls1028ardb:~# ifconfig eno0vf0 hw ether 00:04:9f:3a:4d:56 up root@ls1028ardb:~# ifconfig eno0vf0 eno0vf0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 66:36:2c:3b:87:76 txqueuelen 1000 (Ethernet) RX packets 794 bytes 69239 (69.2 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 11 bytes 2226 (2.2 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://patch.msgid.link/20241029090406.841836-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: hns3: fix kernel crash when 1588 is sent on HIP08 devicesJie Wang2024-10-311-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180 Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issueHao Lan2024-10-312-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: hns3: initialize reset_timer before hclgevf_misc_irq_init()Jian Shen2024-10-311-1/+1
| | | | | | | | | | | | Currently the misc irq is initialized before reset_timer setup. But it will access the reset_timer in the irq handler. So initialize the reset_timer earlier. Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: hns3: don't auto enable misc vectorJian Shen2024-10-311-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, there is a time window between misc irq enabled and service task inited. If an interrupte is reported at this time, it will cause warning like below: [ 16.324639] Call trace: [ 16.324641] __queue_delayed_work+0xb8/0xe0 [ 16.324643] mod_delayed_work_on+0x78/0xd0 [ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge] [ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge] [ 16.324666] __handle_irq_event_percpu+0x64/0x1e0 [ 16.324667] handle_irq_event+0x80/0x170 [ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc [ 16.324671] __handle_domain_irq+0x84/0xfc [ 16.324673] gic_handle_irq+0x88/0x2c0 [ 16.324674] el1_irq+0xb8/0x140 [ 16.324677] arch_cpu_idle+0x18/0x40 [ 16.324679] default_idle_call+0x5c/0x1bc [ 16.324682] cpuidle_idle_call+0x18c/0x1c4 [ 16.324684] do_idle+0x174/0x17c [ 16.324685] cpu_startup_entry+0x30/0x6c [ 16.324687] secondary_start_kernel+0x1a4/0x280 [ 16.324688] ---[ end trace 6aa0bff672a964aa ]--- So don't auto enable misc vector when request irq.. Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: hns3: Resolved the issue that the debugfs query result is inconsistent.Hao Lan2024-10-311-1/+3
| | | | | | | | | | | | | | | | | This patch modifies the implementation of debugfs: When the user process stops unexpectedly, not all data of the file system is read. In this case, the save_buf pointer is not released. When the user process is called next time, save_buf is used to copy the cached data to the user space. As a result, the queried data is inconsistent. To solve this problem, determine whether the function is invoked for the first time based on the value of *ppos. If *ppos is 0, obtain the actual data. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: hns3: fix missing features due to dev->features configuration too earlyHao Lan2024-10-311-1/+0
| | | | | | | | | | | | | Currently, the netdev->features is configured in hns3_nic_set_features. As a result, __netdev_update_features considers that there is no feature difference, and the procedures of the real features are missing. Fixes: 2a7556bb2b73 ("net: hns3: implement ndo_features_check ops for hns3 driver") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: hns3: fixed reset failure issues caused by the incorrect reset typeHao Lan2024-10-312-10/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a reset type that is not supported by the driver is input, a reset pending flag bit of the HNAE3_NONE_RESET type is generated in reset_pending. The driver does not have a mechanism to clear this type of error. As a result, the driver considers that the reset is not complete. This patch provides a mechanism to clear the HNAE3_NONE_RESET flag and the parameter of hnae3_ae_ops.set_default_reset_request is verified. The error message: hns3 0000:39:01.0: cmd failed -16 hns3 0000:39:01.0: hclge device re-init failed, VF is disabled! hns3 0000:39:01.0: failed to reset VF stack hns3 0000:39:01.0: failed to reset VF(4) hns3 0000:39:01.0: prepare reset(2) wait done hns3 0000:39:01.0 eth4: already uninitialized Use the crash tool to view struct hclgevf_dev: struct hclgevf_dev { ... default_reset_request = 0x20, reset_level = HNAE3_NONE_RESET, reset_pending = 0x100, reset_type = HNAE3_NONE_RESET, ... }; Fixes: 720bd5837e37 ("net: hns3: add set_default_reset_request in the hnae3_ae_ops") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: hns3: add sync command to sync io-pgtableJian Shen2024-10-311-0/+27
| | | | | | | | | | | | | | | | | | | | | | | To avoid errors in pgtable prefectch, add a sync command to sync io-pagtable. This is a supplement for the previous patch. We want all the tx packet can be handled with tx bounce buffer path. But it depends on the remain space of the spare buffer, checked by the hns3_can_use_tx_bounce(). In most cases, maybe 99.99%, it returns true. But once it return false by no available space, the packet will be handled with the former path, which will map/unmap the skb buffer. Then the driver will face the smmu prefetch risk again. So add a sync command in this case to avoid smmu prefectch, just protects corner scenes. Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: hns3: default enable tx bounce buffer when smmu enabledPeiyang Wang2024-10-313-0/+66
| | | | | | | | | | | | | | | | | | | | The SMMU engine on HIP09 chip has a hardware issue. SMMU pagetable prefetch features may prefetch and use a invalid PTE even the PTE is valid at that time. This will cause the device trigger fake pagefaults. The solution is to avoid prefetching by adding a SYNC command when smmu mapping a iova. But the performance of nic has a sharp drop. Then we do this workaround, always enable tx bounce buffer, avoid mapping/unmapping on TX path. This issue only affects HNS3, so we always enable tx bounce buffer when smmu enabled to improve performance. Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: ethernet: mtk_wed: fix path of MT7988 WO firmwareDaniel Golle2024-10-311-2/+2
| | | | | | | | | | | | | | | | linux-firmware commit 808cba84 ("mtk_wed: add firmware for mt7988 Wireless Ethernet Dispatcher") added mt7988_wo_{0,1}.bin in the 'mediatek/mt7988' directory while driver current expects the files in the 'mediatek' directory. Change path in the driver header now that the firmware has been added. Fixes: e2f64db13aa1 ("net: ethernet: mtk_wed: introduce WED support for MT7988") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/Zxz0GWTR5X5LdWPe@pidgin.makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 addressIdo Schimmel2024-10-311-2/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device stores IPv6 addresses that are used for encapsulation in linear memory that is managed by the driver. Changing the remote address of an ip6gre net device never worked properly, but since cited commit the following reproducer [1] would result in a warning [2] and a memory leak [3]. The problem is that the new remote address is never added by the driver to its hash table (and therefore the device) and the old address is never removed from it. Fix by programming the new address when the configuration of the ip6gre net device changes and removing the old one. If the address did not change, then the above would result in increasing the reference count of the address and then decreasing it. [1] # ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit # ip link set dev bla type ip6gre remote 2001:db8:3::1 # ip link del dev bla # devlink dev reload pci/0000:01:00.0 [2] WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0 Modules linked in: CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151 Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0 [...] Call Trace: <TASK> mlxsw_sp_router_netdevice_event+0x55f/0x1240 notifier_call_chain+0x5a/0xd0 call_netdevice_notifiers_info+0x39/0x90 unregister_netdevice_many_notify+0x63e/0x9d0 rtnl_dellink+0x16b/0x3a0 rtnetlink_rcv_msg+0x142/0x3f0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x242/0x390 netlink_sendmsg+0x1de/0x420 ____sys_sendmsg+0x2bd/0x320 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xd0 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [3] unreferenced object 0xffff898081f597a0 (size 32): comm "ip", pid 1626, jiffies 4294719324 hex dump (first 32 bytes): 20 01 0d b8 00 02 00 00 00 00 00 00 00 00 00 01 ............... 21 49 61 83 80 89 ff ff 00 00 00 00 01 00 00 00 !Ia............. backtrace (crc fd9be911): [<00000000df89c55d>] __kmalloc_cache_noprof+0x1da/0x260 [<00000000ff2a1ddb>] mlxsw_sp_ipv6_addr_kvdl_index_get+0x281/0x340 [<000000009ddd445d>] mlxsw_sp_router_netdevice_event+0x47b/0x1240 [<00000000743e7757>] notifier_call_chain+0x5a/0xd0 [<000000007c7b9e13>] call_netdevice_notifiers_info+0x39/0x90 [<000000002509645d>] register_netdevice+0x5f7/0x7a0 [<00000000c2e7d2a9>] ip6gre_newlink_common.isra.0+0x65/0x130 [<0000000087cd6d8d>] ip6gre_newlink+0x72/0x120 [<000000004df7c7cc>] rtnl_newlink+0x471/0xa20 [<0000000057ed632a>] rtnetlink_rcv_msg+0x142/0x3f0 [<0000000032e0d5b5>] netlink_rcv_skb+0x50/0x100 [<00000000908bca63>] netlink_unicast+0x242/0x390 [<00000000cdbe1c87>] netlink_sendmsg+0x1de/0x420 [<0000000011db153e>] ____sys_sendmsg+0x2bd/0x320 [<000000003b6d53eb>] ___sys_sendmsg+0x9a/0xe0 [<00000000cae27c62>] __sys_sendmsg+0x7a/0xd0 Fixes: cf42911523e0 ("mlxsw: spectrum_ipip: Use common hash table for IPv6 address mapping") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/e91012edc5a6cb9df37b78fd377f669381facfcb.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* mlxsw: pci: Sync Rx buffers for deviceAmit Cohen2024-10-311-1/+2
| | | | | | | | | | | | | | | | | Non-coherent architectures, like ARM, may require invalidating caches before the device can use the DMA mapped memory, which means that before posting pages to device, drivers should sync the memory for device. Sync for device can be configured as page pool responsibility. Set the relevant flag and define max_len for sync. Cc: Jiri Pirko <jiri@resnulli.us> Fixes: b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/92e01f05c4f506a4f0a9b39c10175dcc01994910.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* mlxsw: pci: Sync Rx buffers for CPUAmit Cohen2024-10-311-7/+15
| | | | | | | | | | | | | | | | | When Rx packet is received, drivers should sync the pages for CPU, to ensure the CPU reads the data written by the device and not stale data from its cache. Add the missing sync call in Rx path, sync the actual length of data for each fragment. Cc: Jiri Pirko <jiri@resnulli.us> Fixes: b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/461486fac91755ca4e04c2068c102250026dcd0b.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* mlxsw: spectrum_ptp: Add missing verification before pushing Tx headerAmit Cohen2024-10-311-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | Tx header should be pushed for each packet which is transmitted via Spectrum ASICs. The cited commit moved the call to skb_cow_head() from mlxsw_sp_port_xmit() to functions which handle Tx header. In case that mlxsw_sp->ptp_ops->txhdr_construct() is used to handle Tx header, and txhdr_construct() is mlxsw_sp_ptp_txhdr_construct(), there is no call for skb_cow_head() before pushing Tx header size to SKB. This flow is relevant for Spectrum-1 and Spectrum-4, for PTP packets. Add the missing call to skb_cow_head() to make sure that there is both enough room to push the Tx header and that the SKB header is not cloned and can be modified. An additional set will be sent to net-next to centralize the handling of the Tx header by pushing it to every packet just before transmission. Cc: Richard Cochran <richardcochran@gmail.com> Fixes: 24157bc69f45 ("mlxsw: Send PTP packets as data packets to overcome a limitation") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/5145780b07ebbb5d3b3570f311254a3a2d554a44.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* ice: fix crash on probe for DPLL enabled E810 LOMArkadiusz Kubalewski2024-10-293-2/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The E810 Lan On Motherboard (LOM) design is vendor specific. Intel provides the reference design, but it is up to vendor on the final product design. For some cases, like Linux DPLL support, the static values defined in the driver does not reflect the actual LOM design. Current implementation of dpll pins is causing the crash on probe of the ice driver for such DPLL enabled E810 LOM designs: WARNING: (...) at drivers/dpll/dpll_core.c:495 dpll_pin_get+0x2c4/0x330 ... Call Trace: <TASK> ? __warn+0x83/0x130 ? dpll_pin_get+0x2c4/0x330 ? report_bug+0x1b7/0x1d0 ? handle_bug+0x42/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? dpll_pin_get+0x117/0x330 ? dpll_pin_get+0x2c4/0x330 ? dpll_pin_get+0x117/0x330 ice_dpll_get_pins.isra.0+0x52/0xe0 [ice] ... The number of dpll pins enabled by LOM vendor is greater than expected and defined in the driver for Intel designed NICs, which causes the crash. Prevent the crash and allow generic pin initialization within Linux DPLL subsystem for DPLL enabled E810 LOM designs. Newly designed solution for described issue will be based on "per HW design" pin initialization. It requires pin information dynamically acquired from the firmware and is already in progress, planned for next-tree only. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* ice: block SF port creation in legacy modeMichal Swiatkowski2024-10-291-0/+6
| | | | | | | | | | | | | | There is no support for SF in legacy mode. Reflect it in the code. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Fixes: eda69d654c7e ("ice: add basic devlink subfunctions support") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* igb: Disable threaded IRQ for igb_msix_otherWander Lairson Costa2024-10-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During testing of SR-IOV, Red Hat QE encountered an issue where the ip link up command intermittently fails for the igbvf interfaces when using the PREEMPT_RT variant. Investigation revealed that e1000_write_posted_mbx returns an error due to the lack of an ACK from e1000_poll_for_ack. The underlying issue arises from the fact that IRQs are threaded by default under PREEMPT_RT. While the exact hardware details are not available, it appears that the IRQ handled by igb_msix_other must be processed before e1000_poll_for_ack times out. However, e1000_write_posted_mbx is called with preemption disabled, leading to a scenario where the IRQ is serviced only after the failure of e1000_write_posted_mbx. To resolve this, we set IRQF_NO_THREAD for the affected interrupt, ensuring that the kernel handles it immediately, thereby preventing the aforementioned error. Reproducer: #!/bin/bash # echo 2 > /sys/class/net/ens14f0/device/sriov_numvfs ipaddr_vlan=3 nic_test=ens14f0 vf=${nic_test}v0 while true; do ip link set ${nic_test} mtu 1500 ip link set ${vf} mtu 1500 ip link set $vf up ip link set ${nic_test} vf 0 vlan ${ipaddr_vlan} ip addr add 172.30.${ipaddr_vlan}.1/24 dev ${vf} ip addr add 2021:db8:${ipaddr_vlan}::1/64 dev ${vf} if ! ip link show $vf | grep 'state UP'; then echo 'Error found' break fi ip link set $vf down done Signed-off-by: Wander Lairson Costa <wander@redhat.com> Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Reported-by: Yuying Ma <yuma@redhat.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB dataFurong Xu2024-10-291-5/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case the non-paged data of a SKB carries protocol header and protocol payload to be transmitted on a certain platform that the DMA AXI address width is configured to 40-bit/48-bit, or the size of the non-paged data is bigger than TSO_MAX_BUFF_SIZE on a certain platform that the DMA AXI address width is configured to 32-bit, then this SKB requires at least two DMA transmit descriptors to serve it. For example, three descriptors are allocated to split one DMA buffer mapped from one piece of non-paged data: dma_desc[N + 0], dma_desc[N + 1], dma_desc[N + 2]. Then three elements of tx_q->tx_skbuff_dma[] will be allocated to hold extra information to be reused in stmmac_tx_clean(): tx_q->tx_skbuff_dma[N + 0], tx_q->tx_skbuff_dma[N + 1], tx_q->tx_skbuff_dma[N + 2]. Now we focus on tx_q->tx_skbuff_dma[entry].buf, which is the DMA buffer address returned by DMA mapping call. stmmac_tx_clean() will try to unmap the DMA buffer _ONLY_IF_ tx_q->tx_skbuff_dma[entry].buf is a valid buffer address. The expected behavior that saves DMA buffer address of this non-paged data to tx_q->tx_skbuff_dma[entry].buf is: tx_q->tx_skbuff_dma[N + 0].buf = NULL; tx_q->tx_skbuff_dma[N + 1].buf = NULL; tx_q->tx_skbuff_dma[N + 2].buf = dma_map_single(); Unfortunately, the current code misbehaves like this: tx_q->tx_skbuff_dma[N + 0].buf = dma_map_single(); tx_q->tx_skbuff_dma[N + 1].buf = NULL; tx_q->tx_skbuff_dma[N + 2].buf = NULL; On the stmmac_tx_clean() side, when dma_desc[N + 0] is closed by the DMA engine, tx_q->tx_skbuff_dma[N + 0].buf is a valid buffer address obviously, then the DMA buffer will be unmapped immediately. There may be a rare case that the DMA engine does not finish the pending dma_desc[N + 1], dma_desc[N + 2] yet. Now things will go horribly wrong, DMA is going to access a unmapped/unreferenced memory region, corrupted data will be transmited or iommu fault will be triggered :( In contrast, the for-loop that maps SKB fragments behaves perfectly as expected, and that is how the driver should do for both non-paged data and paged frags actually. This patch corrects DMA map/unmap sequences by fixing the array index for tx_q->tx_skbuff_dma[entry].buf when assigning DMA buffer address. Tested and verified on DWXGMAC CORE 3.20a Reported-by: Suraj Jaiswal <quic_jsuraj@quicinc.com> Fixes: f748be531d70 ("stmmac: support new GMAC4") Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241021061023.2162701-1-0x1207@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: stmmac: dwmac4: Fix high address display by updating reg_space[] from ↵Ley Foon Tan2024-10-292-0/+10
| | | | | | | | | | | | | | | register values The high address will display as 0 if the driver does not set the reg_space[]. To fix this, read the high address registers and update the reg_space[] accordingly. Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods") Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241021054625.1791965-1-leyfoon.tan@starfivetech.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* r8169: avoid unsolicited interruptsHeiner Kallweit2024-10-231-1/+3
| | | | | | | | | | | | | | | | | | | | | It was reported that after resume from suspend a PCI error is logged and connectivity is broken. Error message is: PCI error (cmd = 0x0407, status_errs = 0x0000) The message seems to be a red herring as none of the error bits is set, and the PCI command register value also is normal. Exception handling for a PCI error includes a chip reset what apparently brakes connectivity here. The interrupt status bit triggering the PCI error handling isn't actually used on PCIe chip versions, so it's not clear why this bit is set by the chip. Fix this by ignoring this bit on PCIe chip versions. Fixes: 0e4851502f84 ("r8169: merge with version 8.001.00 of Realtek's r8168 driver") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219388 Tested-by: Atlas Yu <atlas.yu@canonical.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/78e2f535-438f-4212-ad94-a77637ac6c9c@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* mlxsw: spectrum_router: fix xa_store() error checkingYuan Can2024-10-221-6/+3
| | | | | | | | | | | | | | It is meant to use xa_err() to extract the error encoded in the return value of xa_store(). Fixes: 44c2fbebe18a ("mlxsw: spectrum_router: Share nexthop counters in resilient groups") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20241017023223.74180-1-yuancan@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* fsl/fman: Fix refcount handling of fman-related devicesAleksandr Mishin2024-10-211-15/+47
| | | | | | | | | | | | | | In mac_probe() there are multiple calls to of_find_device_by_node(), fman_bind() and fman_port_bind() which takes references to of_dev->dev. Not all references taken by these calls are released later on error path in mac_probe() and in mac_remove() which lead to reference leaks. Add references release. Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* fsl/fman: Save device references taken in mac_probe()Aleksandr Mishin2024-10-212-3/+9
| | | | | | | | | | | | | | | In mac_probe() there are calls to of_find_device_by_node() which takes references to of_dev->dev. These references are not saved and not released later on error path in mac_probe() and in mac_remove(). Add new fields into mac_device structure to save references taken for future use in mac_probe() and mac_remove(). This is a preparation for further reference leaks fix. Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* octeon_ep: Add SKB allocation failures handling in __octep_oq_process_rx()Aleksandr Mishin2024-10-191-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | build_skb() returns NULL in case of a memory allocation failure so handle it inside __octep_oq_process_rx() to avoid NULL pointer dereference. __octep_oq_process_rx() is called during NAPI polling by the driver. If skb allocation fails, keep on pulling packets out of the Rx DMA queue: we shouldn't break the polling immediately and thus falsely indicate to the octep_napi_poll() that the Rx pressure is going down. As there is no associated skb in this case, don't process the packets and don't push them up the network stack - they are skipped. Helper function is implemented to unmmap/flush all the fragment buffers used by the dropped packet. 'alloc_failures' counter is incremented to mark the skb allocation error in driver statistics. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
* octeon_ep: Implement helper for iterating packets in Rx queueAleksandr Mishin2024-10-191-23/+32
| | | | | | | | | | | | | | The common code with some packet and index manipulations is extracted and moved to newly implemented helper to make the code more readable and avoid duplication. This is a preparation for skb allocation failure handling. Found by Linux Verification Center (linuxtesting.org) with SVACE. Suggested-by: Simon Horman <horms@kernel.org> Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
* bnxt_en: replace ptp_lock with irqsave variantVadim Fedorenko2024-10-193-41/+63
| | | | | | | | | | | | | In netpoll configuration the completion processing can happen in hard irq context which will break with spin_lock_bh() for fullfilling RX timestamp in case of all packets timestamping. Replace it with spin_lock_irqsave() variant. Fixes: 7f5515d19cd7 ("bnxt_en: Get the RX packet timestamp") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Message-ID: <20241016195234.2622004-1-vadfed@meta.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
* be2net: fix potential memory leak in be_xmit()Wang Hai2024-10-191-5/+5
| | | | | | | | | | | | The be_xmit() returns NETDEV_TX_OK without freeing skb in case of be_xmit_enqueue() fails, add dev_kfree_skb_any() to fix it. Fixes: 760c295e0e8d ("be2net: Support for OS2BMC.") Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Message-ID: <20241015144802.12150-1-wanghai38@huawei.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
* net/sun3_82586: fix potential memory leak in sun3_82586_send_packet()Wang Hai2024-10-191-0/+1
| | | | | | | | | | | The sun3_82586_send_packet() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb() to fix it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Message-ID: <20241015144148.7918-1-wanghai38@huawei.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
* net/mlx5e: Don't call cleanup on profile rollback failureCosmin Ratiu2024-10-171-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When profile rollback fails in mlx5e_netdev_change_profile, the netdev profile var is left set to NULL. Avoid a crash when unloading the driver by not calling profile->cleanup in such a case. This was encountered while testing, with the original trigger that the wq rescuer thread creation got interrupted (presumably due to Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by mlx5e_priv_init, the profile rollback also fails for the same reason (signal still active) so the profile is left as NULL, leading to a crash later in _mlx5e_remove. [ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2) [ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12 [ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 [ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 745.538222] #PF: supervisor read access in kernel mode <snipped> [ 745.551290] Call Trace: [ 745.551590] <TASK> [ 745.551866] ? __die+0x20/0x60 [ 745.552218] ? page_fault_oops+0x150/0x400 [ 745.555307] ? exc_page_fault+0x79/0x240 [ 745.555729] ? asm_exc_page_fault+0x22/0x30 [ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core] [ 745.556698] auxiliary_bus_remove+0x18/0x30 [ 745.557134] device_release_driver_internal+0x1df/0x240 [ 745.557654] bus_remove_device+0xd7/0x140 [ 745.558075] device_del+0x15b/0x3c0 [ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core] [ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core] [ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core] [ 745.560203] remove_one+0x4e/0xd0 [mlx5_core] [ 745.560694] pci_device_remove+0x39/0xa0 [ 745.561112] device_release_driver_internal+0x1df/0x240 [ 745.561631] driver_detach+0x47/0x90 [ 745.562022] bus_remove_driver+0x84/0x100 [ 745.562444] pci_unregister_driver+0x3b/0x90 [ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core] [ 745.563415] __x64_sys_delete_module+0x14d/0x2f0 [ 745.563886] ? kmem_cache_free+0x1b0/0x460 [ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190 [ 745.564825] do_syscall_64+0x6d/0x140 [ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 745.565725] RIP: 0033:0x7f1579b1288b Fixes: 3ef14e463f6e ("net/mlx5e: Separate between netdev objects and mlx5e profiles initialization") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net/mlx5: Unregister notifier on eswitch init failureCosmin Ratiu2024-10-171-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It otherwise remains registered and a subsequent attempt at eswitch enabling might trigger warnings of the sort: [ 682.589148] ------------[ cut here ]------------ [ 682.590204] notifier callback eswitch_vport_event [mlx5_core] already registered [ 682.590256] WARNING: CPU: 13 PID: 2660 at kernel/notifier.c:31 notifier_chain_register+0x3e/0x90 [...snipped] [ 682.610052] Call Trace: [ 682.610369] <TASK> [ 682.610663] ? __warn+0x7c/0x110 [ 682.611050] ? notifier_chain_register+0x3e/0x90 [ 682.611556] ? report_bug+0x148/0x170 [ 682.611977] ? handle_bug+0x36/0x70 [ 682.612384] ? exc_invalid_op+0x13/0x60 [ 682.612817] ? asm_exc_invalid_op+0x16/0x20 [ 682.613284] ? notifier_chain_register+0x3e/0x90 [ 682.613789] atomic_notifier_chain_register+0x25/0x40 [ 682.614322] mlx5_eswitch_enable_locked+0x1d4/0x3b0 [mlx5_core] [ 682.614965] mlx5_eswitch_enable+0xc9/0x100 [mlx5_core] [ 682.615551] mlx5_device_enable_sriov+0x25/0x340 [mlx5_core] [ 682.616170] mlx5_core_sriov_configure+0x50/0x170 [mlx5_core] [ 682.616789] sriov_numvfs_store+0xb0/0x1b0 [ 682.617248] kernfs_fop_write_iter+0x117/0x1a0 [ 682.617734] vfs_write+0x231/0x3f0 [ 682.618138] ksys_write+0x63/0xe0 [ 682.618536] do_syscall_64+0x4c/0x100 [ 682.618958] entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: 7624e58a8b3a ("net/mlx5: E-switch, register event handler before arming the event") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 10:19:55 +0100