summaryrefslogtreecommitdiffstats
path: root/drivers/net/ipvlan (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ipvlan: Fix failure path in dev registration during link creationMahesh Bandewar2016-04-281-11/+8
| | | | | | | | | | | | | | | | | When newlink creation fails at device-registration, the port->count is decremented twice. Francesco Ruggeri (fruggeri@arista.com) found this issue in Macvlan and the same exists in IPvlan driver too. While fixing this issue I noticed another issue of missing unregister in case of failure, so adding it to the fix which is similar to the macvlan fix by Francesco in commit 308379607548 ("macvlan: fix failure during registration v3") Reported-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: Eric Dumazet <edumazet@google.com> CC: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: propagate gso_max_segsEric Dumazet2016-03-181-0/+2
| | | | | | | | vlan drivers lack proper propagation of gso_max_segs from lower device. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipvlan: use __ethtool_get_ksettingsDavid Decotigny2016-02-261-4/+4
| | | | | Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: misc changesMahesh Bandewar2016-02-223-18/+20
| | | | | | | | | 1. scope correction for few functions that are used in single file. 2. Adjust variables that are used in fast-path to fit into single cacheline 3. Update rcv_frame() to skip shared check for frames coming over wire Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: mode is u16Mahesh Bandewar2016-02-222-4/+6
| | | | | | | | | | The mode argument was erronusly defined as u32 but it has always been u16. Also use ipvlan_set_mode() helper to set the mode instead of assigning directly. This should avoid future erronus assignments / updates. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: scrub skb before routing in L3 mode.Mahesh Bandewar2016-02-221-9/+10
| | | | | | | | | | | Scrub skb before hitting the iptable hooks to ensure packets hit these hooks. Set the xnet param only when the packet is crossing the ns boundry so if the IPvlan slave and master belong to the same ns, the param will be set to false. Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: inherit MTU from master deviceMahesh Bandewar2016-02-051-0/+1
| | | | | | | | | | | | | | | | | | | When we create IPvlan slave; we use ether_setup() and that sets up default MTU to 1500 while the master device may have lower / different MTU. Any subsequent changes to the masters' MTU are reflected into the slaves' MTU setting. However if those don't happen (most likely scenario), the slaves' MTU stays at 1500 which could be bad. This change adds code to inherit MTU from the master device instead of using the default value during the link initialization phase. Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Tim Hockins <thockins@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASKTom Herbert2015-12-151-1/+1
| | | | | | | | | | | | | | | | | The name NETIF_F_ALL_CSUM is a misnomer. This does not correspond to the set of features for offloading all checksums. This is a mask of the checksum offload related features bits. It is incorrect to set both NETIF_F_HW_CSUM and NETIF_F_IP_CSUM or NETIF_F_IPV6 at the same time for features of a device. This patch: - Changes instances of NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK (where NETIF_F_ALL_CSUM is being used as a mask). - Changes bonding, sfc/efx, ipvlan, macvlan, vlan, and team drivers to use NEITF_F_HW_CSUM in features list instead of NETIF_F_ALL_CSUM. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: fix use after free of skbSabrina Dubroca2015-11-171-1/+1
| | | | | | | | | | | ipvlan_handle_frame is a rx_handler, and when it returns a value other than RX_HANDLER_CONSUMED (here, NET_RX_DROP aka RX_HANDLER_ANOTHER), __netif_receive_skb_core expects that the skb still exists and will process it further, but we just freed it. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: fix leak in ipvlan_rcv_frameSabrina Dubroca2015-11-171-5/+7
| | | | | | | | | | | | | Pass a **skb to ipvlan_rcv_frame so that if skb_share_check returns a new skb, we actually use it during further processing. It's safe to ignore the new skb in the ipvlan_xmit_* functions, because they call ipvlan_rcv_frame with local == true, so that dev_forward_skb is called and always takes ownership of the skb. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: read direct ifindex instead of iflinkBrenden Blanco2015-10-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the ipv4 outbound path of an ipvlan device in l3 mode, the ifindex is being grabbed from dev_get_iflink. This works for the physical device case, since as the documentation of that function notes: "Physical interfaces have the same 'ifindex' and 'iflink' values.". However, if the master device is a veth, and the pairs are in separate net namespaces, the route lookup will fail with -ENODEV due to outer veth pair being in a separate namespace from the ipvlan master/routing namespace. ns0 | ns1 | ns2 veth0a--|--veth0b--|--ipvl0 In ipvlan_process_v4_outbound(), a packet sent from ipvl0 in the above configuration will pass fl.flowi4_oif == veth0a to ip_route_output_flow(), but *net == ns1. Notice also that ipv6 processing is not using iflink. Since there is a discrepancy in usage, fixup both v4 and v6 case to use local dev variable. Tested this with l3 ipvlan on top of veth, as well as with single physical interface in the top namespace. Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4, ipv6: Pass net into ip_local_out and ip6_local_outEric W. Biederman2015-10-081-2/+2
| | | | | Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: Cache net in ipvlan_process_v4_outbound and ipvlan_process_v6_outboundEric W. Biederman2015-10-081-2/+4
| | | | | | | | | Compute net once in ipvlan_process_v4_outbound and ipvlan_process_v6_outbound and store it in a variable so that net does not need to be recomputed next time it is used. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Merge ip6_local_out and ip6_local_out_skEric W. Biederman2015-10-081-1/+1
| | | | | | | | | Stop hidding the sk parameter with an inline helper function and make all of the callers pass it, so that it is clear what the function is doing. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Merge ip_local_out and ip_local_out_skEric W. Biederman2015-10-081-1/+1
| | | | | | | | | It is confusing and silly hiding a parameter so modify all of the callers to pass in the appropriate socket or skb->sk if no socket is known. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipvlan: convert to using IFF_NO_QUEUEPhil Sutter2015-08-181-2/+1
| | | | | | Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: ignore addresses from ipv6 autoconfigurationKonstantin Khlebnikov2015-07-161-0/+4
| | | | | | | | | | | | Inet6addr notifier is atomic and runs in bh context without RTNL when ipv6 receives router advertisement packet and performs autoconfiguration. Proper fix still in discussion. Let's at least plug the bug. v1: http://lkml.kernel.org/r/20150514135618.14062.1969.stgit@buzz v2: http://lkml.kernel.org/r/20150703125840.24121.91556.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: use rcu_deference_bh() in ipvlan_queue_xmit()WANG Cong2015-07-162-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In tx path rcu_read_lock_bh() is held, so we need rcu_deference_bh(). This fixes the following warning: =============================== [ INFO: suspicious RCU usage. ] 4.1.0-rc1+ #1007 Not tainted ------------------------------- drivers/net/ipvlan/ipvlan.h:106 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by dhclient/1076: #0: (rcu_read_lock_bh){......}, at: [<ffffffff817e8d84>] rcu_lock_acquire+0x0/0x26 stack backtrace: CPU: 2 PID: 1076 Comm: dhclient Not tainted 4.1.0-rc1+ #1007 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000001 ffff8800d381bac8 ffffffff81a4154f 000000003c1a3c19 ffff8800d4d0a690 ffff8800d381baf8 ffffffff810b849f ffff880117d41148 ffff880117d40000 ffff880117d40068 0000000000000156 ffff8800d381bb18 Call Trace: [<ffffffff81a4154f>] dump_stack+0x4c/0x65 [<ffffffff810b849f>] lockdep_rcu_suspicious+0x107/0x110 [<ffffffff8165a522>] ipvlan_port_get_rcu+0x47/0x4e [<ffffffff8165ad14>] ipvlan_queue_xmit+0x35/0x450 [<ffffffff817ea45d>] ? rcu_read_unlock+0x3e/0x5f [<ffffffff810a20bf>] ? local_clock+0x19/0x22 [<ffffffff810b4781>] ? __lock_is_held+0x39/0x52 [<ffffffff8165b64c>] ipvlan_start_xmit+0x1b/0x44 [<ffffffff817edf7f>] dev_hard_start_xmit+0x2ae/0x467 [<ffffffff817ee642>] __dev_queue_xmit+0x50a/0x60c [<ffffffff817ee7a7>] dev_queue_xmit_sk+0x13/0x15 [<ffffffff81997596>] dev_queue_xmit+0x10/0x12 [<ffffffff8199b41c>] packet_sendmsg+0xb6b/0xbdf [<ffffffff810b5ea7>] ? mark_lock+0x2e/0x226 [<ffffffff810a1fcc>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff817d56f9>] sock_sendmsg_nosec+0x12/0x1d [<ffffffff817d7257>] sock_sendmsg+0x29/0x2e [<ffffffff817d72cc>] sock_write_iter+0x70/0x91 [<ffffffff81199563>] __vfs_write+0x7e/0xa7 [<ffffffff811996bc>] vfs_write+0x92/0xe8 [<ffffffff811997d7>] SyS_write+0x47/0x7e [<ffffffff81a4d517>] system_call_fastpath+0x12/0x6f Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: unhash addresses without synchronize_rcuKonstantin Khlebnikov2015-07-163-8/+6
| | | | | | | | | | All structures used in traffic forwarding are rcu-protected: ipvl_addr, ipvl_dev and ipvl_port. Thus we can unhash addresses without synchronization. We'll anyway hash it back into the same bucket: in worst case lockless lookup will scan hash once again. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: plug memory leak in ipvlan_link_deleteKonstantin Khlebnikov2015-07-161-0/+1
| | | | | | | Add missing kfree_rcu(addr, rcu); Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: remove counters of ipv4 and ipv6 addressesKonstantin Khlebnikov2015-07-162-23/+12
| | | | | | | | They are unused after commit f631c44bbe15 ("ipvlan: Always set broadcast bit in multicast filter"). Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: Always set broadcast bit in multicast filterMahesh Bandewar2015-05-061-14/+6
| | | | | | | | | | | | Earlier tricks of setting broadcast bit only when IPv4 address is added onto interface are not good enough especially when autoconf comes in play. Setting them on always is performance drag but now that multicast / broadcast is not processed in fast-path; enabling broadcast will let autoconf work correctly without affecting performance characteristics of the device. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: Defer multicast / broadcast processing to a work-queueMahesh Bandewar2015-05-063-52/+96
| | | | | | | | | | | | | | | | | | | | | Processing multicast / broadcast in fast path is performance draining and having more links means more cloning and bringing performance down further. Broadcast; in particular, need to be given to all the virtual links. Earlier tricks of enabling broadcast bit for IPv4 only interfaces are not really working since it fails autoconf. Which means enabling broadcast for all the links if protocol specific hacks do not have to be added into the driver. This patch defers all (incoming as well as outgoing) multicast traffic to a work-queue leaving only the unicast traffic in the fast-path. Now if we need to apply any additional tricks to further reduce the impact of this (multicast / broadcast) type of traffic, it can be implemented while processing this work without affecting the fast-path. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-04-023-20/+42
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipvlan: fix check for IP addresses in control pathJiri Benc2015-03-313-10/+21
| | | | | | | | | | | | | | | | | | | | When an ipvlan interface is down, its addresses are not on the hash list. Fix checks for existence of addresses not to depend on the hash list, walk through all interface addresses instead. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipvlan: do not use rcu operations for address listJiri Benc2015-03-311-5/+5
| | | | | | | | | | | | | | All accesses to ipvlan->addrs are under rtnl. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipvlan: protect against concurrent link removalJiri Benc2015-03-311-1/+3
| | | | | | | | | | | | | | | | Adding and removing to the 'ipvlans' list is already done using _rcu list operations. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipvlan: fix addr hash list corruptionJiri Benc2015-03-312-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ipvlan interface with IP addresses attached is brought down and then deleted, the assigned addresses are deleted twice from the address hash list, first on the interface down and second on the link deletion. Similarly, when an address is added while the interface is down, it is added second time once the interface is brought up. When the interface is down, the addresses should be kept off the hash list for performance reasons. Ensure this is true, which also fixes the double add problem. To fix the double free, check whether the address is hashed before removing it. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipvlan: implement ndo_get_iflinkNicolas Dichtel2015-04-021-1/+8
| | | | | | | | | | | | | | | | Don't use dev->iflink anymore. CC: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dev: introduce dev_get_iflink()Nicolas Dichtel2015-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | The goal of this patch is to prepare the removal of the iflink field. It introduces a new ndo function, which will be implemented by virtual interfaces. There is no functional change into this patch. All readers of iflink field now call dev_get_iflink(). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Kill dev_rebuild_headerEric W. Biederman2015-03-021-1/+0
|/ | | | | | | | | | Now that there are no more users kill dev_rebuild_header and all of it's implementations. This is long overdue. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: add a missing __percpu pcpu_statsEric Dumazet2015-02-121-1/+1
| | | | | | | Cosmetic patch to add __percpu qualifier to pcpu_stats Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mark some potential candidates __read_mostlyDaniel Borkmann2015-01-311-1/+1
| | | | | | | | They are all either written once or extremly rarely (e.g. from init code), so we can move them to the .data..read_mostly section. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: fix incorrect usage of IS_ERR() macro in IPv6 code path.Mahesh Bandewar2015-01-251-2/+4
| | | | | | | | | | | | | | | The ip6_route_output() always returns a valid dst pointer unlike in IPv4 case. So the validation has to be different from the IPv4 path. Correcting that error in this patch. This was picked up by a static checker with a following warning - drivers/net/ipvlan/ipvlan_core.c:380 ipvlan_process_v6_outbound() warn: 'dst' isn't an ERR_PTR Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: move the device check function into netdevice.hMahesh Bandewar2014-12-092-15/+5
| | | | | | | | | | Move the port check [ipvlan_dev_master()] and device check [ipvlan_dev_slave()] functions to netdevice.h and rename them netif_is_ipvlan_port() and netif_is_ipvlan() resp. to be consistent with macvlan api naming. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: play well with macvlan deviceMahesh Bandewar2014-12-091-0/+6
| | | | | | | | | | | | | | | | | If a device is already a macvlan port then refuse to use it as an ipvlan port in the early stage of port creation. thost1:~# ip link add link eth0 mvl0 type macvlan thost1:~# echo $? 0 thost1:~# ip link add link eth0 ipvl0 type ipvlan RTNETLINK answers: Device or resource busy thost1:~# echo $? 2 thost1:~# Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net-ipvlan: Deletion of an unnecessary check before the function call ↵Markus Elfring2014-12-061-2/+1
| | | | | | | | | | | | | "free_percpu" The free_percpu() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: ipvlan depends on INET and IPV6Mahesh Bandewar2014-11-301-1/+2
| | | | | | | | | This driver uses ip_out_local() and ip6_route_output() which are defined only if CONFIG_INET and CONFIG_IPV6 are enabled respectively. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: fix sparse warningsMahesh Bandewar2014-11-261-2/+3
| | | | | | | | | | | | | | Fix sparse warnings reported by kbuild robot drivers/net/ipvlan/ipvlan_main.c:172:13: warning: symbol 'ipvlan_start_xmit' was not declared. Should it be static? drivers/net/ipvlan/ipvlan_main.c:256:33: warning: incorrect type in initializer (different address spaces) drivers/net/ipvlan/ipvlan_main.c:256:33: expected void const [noderef] <asn:3>*__vpp_verify drivers/net/ipvlan/ipvlan_main.c:256:33: got struct ipvl_pcpu_stats *<noident> drivers/net/ipvlan/ipvlan_main.c:544:5: warning: symbol 'ipvlan_link_register' was not declared. Should it be static Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: Initial check-in of the IPVLAN driver.Mahesh Bandewar2014-11-244-0/+1533
This driver is very similar to the macvlan driver except that it uses L3 on the frame to determine the logical interface while functioning as packet dispatcher. It inherits L2 of the master device hence the packets on wire will have the same L2 for all the packets originating from all virtual devices off of the same master device. This driver was developed keeping the namespace use-case in mind. Hence most of the examples given here take that as the base setup where main-device belongs to the default-ns and virtual devices are assigned to the additional namespaces. The device operates in two different modes and the difference in these two modes in primarily in the TX side. (a) L2 mode : In this mode, the device behaves as a L2 device. TX processing upto L2 happens on the stack of the virtual device associated with (namespace). Packets are switched after that into the main device (default-ns) and queued for xmit. RX processing is simple and all multicast, broadcast (if applicable), and unicast belonging to the address(es) are delivered to the virtual devices. (b) L3 mode : In this mode, the device behaves like a L3 device. TX processing upto L3 happens on the stack of the virtual device associated with (namespace). Packets are switched to the main-device (default-ns) for the L2 processing. Hence the routing table of the default-ns will be used in this mode. RX processins is somewhat similar to the L2 mode except that in this mode only Unicast packets are delivered to the virtual device while main-dev will handle all other packets. The devices can be added using the "ip" command from the iproute2 package - ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ] Signed-off-by: Mahesh Bandewar <maheshb@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Laurent Chavey <chavey@google.com> Cc: Tim Hockin <thockin@google.com> Cc: Brandon Philips <brandon.philips@coreos.com> Cc: Pavel Emelianov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 05:46:59 +0100