summaryrefslogtreecommitdiffstats
path: root/drivers/net/macsec.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* macsec: don't free NULL metadata_dstSabrina Dubroca2022-09-261-1/+2
| | | | | | | | | | | | | | | | | | Commit 0a28bfd4971f added a metadata_dst to each tx_sc, but that's only allocated when macsec_add_dev has run, which happens after device registration. If the requested or computed SCI already exists, or if linking to the lower device fails, we will panic because metadata_dst_free can't handle NULL. Reproducer: ip link add link $lower type macsec ip link add link $lower type macsec Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/60f2a1965fe553e2cade9472407d0fafff8de8ce.1663923580.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: macsec: remove the prepare flag from the MACsec offloading contextAntoine Tenart2022-09-231-1/+0
| | | | | | | | | Now that the MACsec offloading preparation phase was removed from the MACsec core implementation as well as from drivers implementing it, we can safely remove the flag representing it. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: macsec: remove the prepare phase when offloadingAntoine Tenart2022-09-231-13/+0
| | | | | | | | | | | | | | | | The hardware offloading in MACsec was initially supported using 2 phases. This was proposed in the RFC as this could have allowed easier fallback to the software implementation if the hardware did not support a feature or had enough entries already. But this fallback wasn't implemented and might not be a good idea after all. In addition it turned out this logic didn't mapped well the hardware logic and device drivers were mostly ignoring the preparation phase. Let's remove this as it does not offer any advantage and is ignored by drivers. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: macsec: Expose extended packet number (EPN) properties to macsec offloadEmeel Hakim2022-09-231-12/+12
| | | | | | | | | | | | | Currently macsec invokes HW offload path before reading extended packet number (EPN) related user properties i.e. salt and short secure channel identifier (ssci), hence preventing macsec EPN HW offload. Expose those by moving macsec EPN properties reading prior to HW offload path. Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net/macsec: Move some code for sharing with various drivers that implements ↵Lior Nahmanson2022-09-071-27/+6
| | | | | | | | | | | | | | | offload Move some MACsec infrastructure like defines and functions, in order to avoid code duplication for future drivers which implements MACsec offload. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ben Ben-Ishay <benishay@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/macsec: Add MACsec skb_metadata_dst Rx Data path supportLior Nahmanson2022-09-071-0/+6
| | | | | | | | | | | | | | | | Like in the Tx changes, if there are more than one MACsec device with the same MAC address as in the packet's destination MAC, the packet will be forward only to this device and not neccessarly to the desired one. Offloading device drivers will mark offloaded MACsec SKBs with the corresponding SCI in the skb_metadata_dst so the macsec rx handler will know to which port to divert those skbs, instead of wrongly solely relaying on dst MAC address comparison. Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/macsec: Add MACsec skb_metadata_dst Tx Data path supportLior Nahmanson2022-09-071-0/+15
| | | | | | | | | | | | | | | | | In the current MACsec offload implementation, MACsec interfaces shares the same MAC address by default. Therefore, HW can't distinguish from which MACsec interface the traffic originated from. MACsec stack will use skb_metadata_dst to store the SCI value, which is unique per Macsec interface, skb_metadat_dst will be used by the offloading device driver to associate the SKB with the corresponding offloaded interface (SCI). Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* genetlink: start to validate reserved header bytesJakub Kicinski2022-08-291-0/+1
| | | | | | | | | | | | | | | | | We had historically not checked that genlmsghdr.reserved is 0 on input which prevents us from using those precious bytes in the future. One use case would be to extend the cmd field, which is currently just 8 bits wide and 256 is not a lot of commands for some core families. To make sure that new families do the right thing by default put the onus of opting out of validation on existing families. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel) Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "net: macsec: update SCI upon MAC address change."Sabrina Dubroca2022-08-201-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 6fc498bc82929ee23aa2f35a828c6178dfd3f823. Commit 6fc498bc8292 states: SCI should be updated, because it contains MAC in its first 6 octets. That's not entirely correct. The SCI can be based on the MAC address, but doesn't have to be. We can also use any 64-bit number as the SCI. When the SCI based on the MAC address, it uses a 16-bit "port number" provided by userspace, which commit 6fc498bc8292 overwrites with 1. In addition, changing the SCI after macsec has been setup can just confuse the receiver. If we configure the RXSC on the peer based on the original SCI, we should keep the same SCI on TX. When the macsec device is being managed by a userspace key negotiation daemon such as wpa_supplicant, commit 6fc498bc8292 would also overwrite the SCI defined by userspace. Fixes: 6fc498bc8292 ("net: macsec: update SCI upon MAC address change.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/9b1a9d28327e7eb54550a92eebda45d25e54dd0d.1660667033.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* macsec: Fix traffic counters/statisticsClayton Yager2022-08-101-9/+49
| | | | | | | | | | | | | | | | | | | | | | OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-07-291-12/+21
|\ | | | | | | | | | | No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: macsec: fix potential resource leak in macsec_add_rxsa() and ↵Jianglei Nie2022-07-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | macsec_add_txsa() init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa-> key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error occurs after init_rx_sa() is called in macsec_add_rxsa(), the function released rx_sa with kfree() without releasing rx_sa->stats and rx_sa-> key.tfm, which will lead to a resource leak. We should call macsec_rxsa_put() instead of kfree() to decrease the ref count of rx_sa and release the relevant resource if the refcount is 0. The same bug exists in macsec_add_txsa() for tx_sa as well. This patch fixes the above two bugs. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * macsec: always read MACSEC_SA_ATTR_PN as a u64Sabrina Dubroca2022-07-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a u32, sometimes forced into a u64 without checking the actual length of the attribute. Instead, we can use nla_get_u64 everywhere, which will read up to 64 bits into a u64, capped by the actual length of the attribute coming from userspace. This fixes several issues: - the check in validate_add_rxsa doesn't work with 32-bit attributes - the checks in validate_add_txsa and validate_upd_sa incorrectly reject X << 32 (with X != 0) Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * macsec: limit replay window size with XPNSabrina Dubroca2022-07-251-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value of the replay window is 2^30-1, to help with recovery of the upper bits of the PN. To avoid leaving the existing macsec device in an inconsistent state if this test fails during changelink, reuse the cleanup mechanism introduced for HW offload. This wasn't needed until now because macsec_changelink_common could not fail during changelink, as modifying the cipher suite was not allowed. Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so that secy->xpn is set. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * macsec: fix error message in macsec_add_rxsa and _txsaSabrina Dubroca2022-07-251-2/+2
| | | | | | | | | | | | | | | | The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * macsec: fix NULL deref in macsec_add_rxsaSabrina Dubroca2022-07-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 48ef50fa866a added a test on tb_sa[MACSEC_SA_ATTR_PN], but nothing guarantees that it's not NULL at this point. The same code was added to macsec_add_txsa, but there it's not a problem because validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is present. Note: it's not possible to reproduce with iproute, because iproute doesn't allow creating an SA without specifying the PN. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315 Reported-by: Frantisek Sumsal <fsumsal@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: adopt u64_stats_t in struct pcpu_sw_netstatsEric Dumazet2022-06-101-4/+4
| | | | | | | | | | | | | | | | As explained in commit 316580b69d0a ("u64_stats: provide u64_stats_t type") we should use u64_stats_t and related accessors to avoid load/store tearing. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: rename reference+tracking helpersJakub Kicinski2022-06-101-2/+2
|/ | | | | | | | | | | | | | | Netdev reference helpers have a dev_ prefix for historic reasons. Renaming the old helpers would be too much churn but we can rename the tracking ones which are relatively recent and should be the default for new code. Rename: dev_hold_track() -> netdev_hold() dev_put_track() -> netdev_put() dev_replace_track() -> netdev_ref_replace() Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* macsec: fix UAF bug for real_devZiyang Xuan2022-06-011-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a new macsec device but not get reference to real_dev. That can not ensure that real_dev is freed after macsec. That will trigger the UAF bug for real_dev as following: ================================================================== BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 Call Trace: ... macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 dev_get_iflink+0x73/0xe0 net/core/dev.c:637 default_operstate net/core/link_watch.c:42 [inline] rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54 linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161 Allocated by task 22209: ... alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549 rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235 veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748 Freed by task 8: ... kfree+0xd6/0x4d0 mm/slub.c:4552 kvfree+0x42/0x50 mm/util.c:615 device_release+0x9f/0x240 drivers/base/core.c:2229 kobject_cleanup lib/kobject.c:673 [inline] kobject_release lib/kobject.c:704 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1c8/0x540 lib/kobject.c:721 netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327 After commit faab39f63c1f ("net: allow out-of-order netdev unregistration") and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we can add dev_hold_track() in macsec_dev_init() and dev_put_track() in macsec_free_netdev() to fix the problem. Fixes: 2bce1ebed17d ("macsec: fix refcnt leak in module exit routine") Reported-by: syzbot+d0e94b65ac259c29ce7a@syzkaller.appspotmail.com Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20220531074500.1272846-1-william.xuanziyang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: dev: Makes sure netif_rx() can be invoked in any context.Sebastian Andrzej Siewior2022-02-141-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dave suggested a while ago (eleven years by now) "Let's make netif_rx() work in all contexts and get rid of netif_rx_ni()". Eric agreed and pointed out that modern devices should use netif_receive_skb() to avoid the overhead. In the meantime someone added another variant, netif_rx_any_context(), which behaves as suggested. netif_rx() must be invoked with disabled bottom halves to ensure that pending softirqs, which were raised within the function, are handled. netif_rx_ni() can be invoked only from process context (bottom halves must be enabled) because the function handles pending softirqs without checking if bottom halves were disabled or not. netif_rx_any_context() invokes on the former functions by checking in_interrupts(). netif_rx() could be taught to handle both cases (disabled and enabled bottom halves) by simply disabling bottom halves while invoking netif_rx_internal(). The local_bh_enable() invocation will then invoke pending softirqs only if the BH-disable counter drops to zero. Eric is concerned about the overhead of BH-disable+enable especially in regard to the loopback driver. As critical as this driver is, it will receive a shortcut to avoid the additional overhead which is not needed. Add a local_bh_disable() section in netif_rx() to ensure softirqs are handled if needed. Provide __netif_rx() which does not disable BH and has a lockdep assert to ensure that interrupts are disabled. Use this shortcut in the loopback driver and in drivers/net/*.c. Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they can be removed once they are no more users left. Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macsec: Verify that send_sci is on when setting Tx sci explicitlyLior Nahmanson2022-02-021-0/+9
| | | | | | | | | | | | | | | | | | When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci. Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: macsec: Fix offload support for NETDEV_UNREGISTER eventLior Nahmanson2022-02-011-12/+12
| | | | | | | | | | | | | | | | | | | Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: drivers: get ready for const netdev->dev_addrJakub Kicinski2021-10-241-1/+1
| | | | | | | | | | | | | Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. We will make netdev->dev_addr a const. Make sure local references to netdev->dev_addr are constant. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski2021-10-021-1/+1
| | | | | | | | | | | | | Convert from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macsec: fix the length used to copy the key for offloadingAntoine Tenart2021-06-241-2/+2
| | | | | | | | | | | | | | | The key length used when offloading macsec to Ethernet or PHY drivers was set to MACSEC_KEYID_LEN (16), which is an issue as: - This was never meant to be the key length. - The key length can be > 16. Fix this by using MACSEC_MAX_KEY_LEN to store the key (the max length accepted in uAPI) and secy->key_len to copy it. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Reported-by: Lior Nahmanson <liorna@nvidia.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macsec: Add missing documentation for 'gro_cells'Lee Jones2020-11-041-0/+1
| | | | | | | | | | Fixes the following W=1 kernel build warning(s): drivers/net/macsec.c:113: warning: Function parameter or member 'gro_cells' not described in 'macsec_dev' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201102114512.1062724-26-lee.jones@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: macsec: use new function dev_fetch_sw_netstatsHeiner Kallweit2020-10-141-21/+1
| | | | | | | | Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/0d81e0f7-7784-42df-8e10-d0b77ca5b7ee@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2020-10-091-1/+3
|\ | | | | | | | | | | | | | | Small conflict around locking in rxrpc_process_event() - channel_lock moved to bundle in next, while state lock needs _bh() from net. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * macsec: avoid use-after-free in macsec_handle_frame()Eric Dumazet2020-10-081-1/+3
| | | | | | | | | | | | | | | | | | | | | | De-referencing skb after call to gro_cells_receive() is not allowed. We need to fetch skb->len earlier. Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | genetlink: move to smaller ops wherever possibleJakub Kicinski2020-10-031-3/+3
| | | | | | | | | | | | | | | | Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netlink: consistently use NLA_POLICY_MIN_LEN()Johannes Berg2020-08-181-1/+1
|/ | | | | | | | | Change places that open-code NLA_POLICY_MIN_LEN() to use the macro instead, giving us flexibility in how we handle the details of the macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: get rid of lockdep_set_class_and_subclass()Cong Wang2020-06-291-3/+2
| | | | | | | | | | | | | | | | | lockdep_set_class_and_subclass() is meant to reduce the _nested() annotations by assigning a default subclass. For addr_list_lock, we have to compute the subclass at run-time as the netdevice topology changes after creation. So, we should just get rid of these lockdep_set_class_and_subclass() and stick with our _nested() annotations. Fixes: 845e0ebb4408 ("net: change addr_list_lock back to static key") Suggested-by: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: change addr_list_lock back to static keyCong Wang2020-06-091-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dynamic key update for addr_list_lock still causes troubles, for example the following race condition still exists: CPU 0: CPU 1: (RCU read lock) (RTNL lock) dev_mc_seq_show() netdev_update_lockdep_key() -> lockdep_unregister_key() -> netif_addr_lock_bh() because lockdep doesn't provide an API to update it atomically. Therefore, we have to move it back to static keys and use subclass for nest locking like before. In commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), I already reverted most parts of commit ab92d68fc22f ("net: core: add generic lockdep keys"). This patch reverts the rest and also part of commit f3b0a18bb6cb ("net: remove unnecessary variables and callback"). After this patch, addr_list_lock changes back to using static keys and subclasses to satisfy lockdep. Thanks to dev->lower_level, we do not have to change back to ->ndo_get_lock_subclass(). And hopefully this reduces some syzbot lockdep noises too. Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com Cc: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2020-05-071-2/+4
|\ | | | | | | | | | | Conflicts were all overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: macsec: fix rtnl locking issueAntoine Tenart2020-05-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | netdev_update_features() must be called with the rtnl lock taken. Not doing so triggers a warning, as ASSERT_RTNL() is used in __netdev_update_features(), the first function called by netdev_update_features(). Fix this. Fixes: c850240b6c41 ("net: macsec: report real_dev features when HW offloading is enabled") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: macsec: preserve ingress frame orderingScott Dial2020-05-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MACsec decryption always occurs in a softirq context. Since the FPU may not be usable in the softirq context, the call to decrypt may be scheduled on the cryptd work queue. The cryptd work queue does not provide ordering guarantees. Therefore, preserving order requires masking out ASYNC implementations of gcm(aes). For instance, an Intel CPU with AES-NI makes available the generic-gcm-aesni driver from the aesni_intel module to implement gcm(aes). However, this implementation requires the FPU, so it is not always available to use from a softirq context, and will fallback to the cryptd work queue, which does not preserve frame ordering. With this change, such a system would select gcm_base(ctr(aes-aesni),ghash-generic). While the aes-aesni implementation prefers to use the FPU, it will fallback to the aes-asm implementation if unavailable. By using a synchronous version of gcm(aes), the decryption will complete before returning from crypto_aead_decrypt(). Therefore, the macsec_decrypt_done() callback will be called before returning from macsec_decrypt(). Thus, the order of calls to macsec_post_decrypt() for the frames is preserved. While it's presumable that the pure AES-NI version of gcm(aes) is more performant, the hybrid solution is capable of gigabit speeds on modest hardware. Regardless, preserving the order of frames is paramount for many network protocols (e.g., triggering TCP retries). Within the MACsec driver itself, the replay protection is tripped by the out-of-order frames, and can cause frames to be dropped. This bug has been present in this code since it was added in v4.6, however it may not have been noticed since not all CPUs have FPU offload available. Additionally, the bug manifests as occasional out-of-order packets that are easily misattributed to other network phenomena. When this code was added in v4.6, the crypto/gcm.c code did not restrict selection of the ghash function based on the ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would select the ghash-clmulni driver instead of ghash-generic, which submits to the cryptd work queue if the FPU is busy. However, this bug was was corrected in v4.8 by commit b30bdfa86431afbafe15284a3ad5ac19b49b88e3, and was backported all the way back to the v3.14 stable branch, so this patch should be applicable back to the v4.6 stable branch. Signed-off-by: Scott Dial <scott@scottdial.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: partially revert dynamic lockdep key changesCong Wang2020-05-041-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reverts the folowing commits: commit 064ff66e2bef84f1153087612032b5b9eab005bd "bonding: add missing netdev_update_lockdep_key()" commit 53d374979ef147ab51f5d632dfe20b14aebeccd0 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3d24125992ab0026b0dab16c08df947c7 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68fc22f9afab480153bd82a20f6e2533769 "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* macsec: avoid to set wrong mtuTaehee Yoo2020-04-251-4/+8
| | | | | | | | | | | | | | | | | | | | | | | When a macsec interface is created, the mtu is calculated with the lower interface's mtu value. If the mtu of lower interface is lower than the length, which is needed by macsec interface, macsec's mtu value will be overflowed. So, if the lower interface's mtu is too low, macsec interface's mtu should be set to 0. Test commands: ip link add dummy0 mtu 10 type dummy ip link add macsec0 link dummy0 type macsec ip link show macsec0 Before: 11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274 After: 11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0 Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macsec: fix using wrong structure in macsec_changelink()Taehee Yoo2020-04-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the macsec_changelink(), "struct macsec_tx_sa tx_sc" is used to store "macsec_secy.tx_sc". But, the struct type of tx_sc is macsec_tx_sc, not macsec_tx_sa. So, the macsec_tx_sc should be used instead. Test commands: ip link add dummy0 type dummy ip link add macsec0 link dummy0 type macsec ip link set macsec0 type macsec encrypt off Splat looks like: [61119.963483][ T9335] ================================================================== [61119.964709][ T9335] BUG: KASAN: slab-out-of-bounds in macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.965787][ T9335] Read of size 160 at addr ffff888020d69c68 by task ip/9335 [61119.966699][ T9335] [61119.966979][ T9335] CPU: 0 PID: 9335 Comm: ip Not tainted 5.6.0+ #503 [61119.967791][ T9335] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [61119.968914][ T9335] Call Trace: [61119.969324][ T9335] dump_stack+0x96/0xdb [61119.969809][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.970554][ T9335] print_address_description.constprop.5+0x1be/0x360 [61119.971294][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.971973][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.972703][ T9335] __kasan_report+0x12a/0x170 [61119.973323][ T9335] ? macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.973942][ T9335] kasan_report+0xe/0x20 [61119.974397][ T9335] check_memory_region+0x149/0x1a0 [61119.974866][ T9335] memcpy+0x1f/0x50 [61119.975209][ T9335] macsec_changelink.part.34+0xb6/0x200 [macsec] [61119.975825][ T9335] ? macsec_get_stats64+0x3e0/0x3e0 [macsec] [61119.976451][ T9335] ? kernel_text_address+0x111/0x120 [61119.976990][ T9335] ? pskb_expand_head+0x25f/0xe10 [61119.977503][ T9335] ? stack_trace_save+0x82/0xb0 [61119.977986][ T9335] ? memset+0x1f/0x40 [61119.978397][ T9335] ? __nla_validate_parse+0x98/0x1ab0 [61119.978936][ T9335] ? macsec_alloc_tfm+0x90/0x90 [macsec] [61119.979511][ T9335] ? __kasan_slab_free+0x111/0x150 [61119.980021][ T9335] ? kfree+0xce/0x2f0 [61119.980700][ T9335] ? netlink_trim+0x196/0x1f0 [61119.981420][ T9335] ? nla_memcpy+0x90/0x90 [61119.982036][ T9335] ? register_lock_class+0x19e0/0x19e0 [61119.982776][ T9335] ? memcpy+0x34/0x50 [61119.983327][ T9335] __rtnl_newlink+0x922/0x1270 [ ... ] Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* macsec: fix NULL dereference in macsec_upd_offload()Davide Caratti2020-04-061-0/+3
| | | | | | | | | | | | macsec_upd_offload() gets the value of MACSEC_OFFLOAD_ATTR_TYPE without checking its presence in the request message, and this causes a NULL dereference. Fix it rejecting any configuration that does not include this attribute. Reported-and-tested-by: syzbot+7022ab7c383875c17eff@syzkaller.appspotmail.com Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macsec: add support for specifying offload upon link creationMark Starovoytov2020-03-301-2/+29
| | | | | | | | | | | This patch adds new netlink attribute to allow a user to (optionally) specify the desired offload mode immediately upon MACSec link creation. Separate iproute patch will be required to support this from user space. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macsec: report real_dev features when HW offloading is enabledMark Starovoytov2020-03-271-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | This patch makes real_dev_feature propagation by MACSec offloaded device. Issue description: real_dev features are disabled upon macsec creation. Root cause: Features limitation (specific to SW MACSec limitation) is being applied to HW offloaded case as well. This causes 'set_features' request on the real_dev with reduced feature set due to chain propagation. Proposed solution: Report real_dev features when HW offloading is enabled. NB! MACSec offloaded device does not propagate VLAN offload features at the moment. This can potentially be added later on as a separate patch. Note: this patch requires HW offloading to be enabled by default in order to function properly. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macsec: add support for getting offloaded statsDmitry Bogdanov2020-03-271-108/+213
| | | | | | | | | | When HW offloading is enabled, offloaded stats should be used, because s/w stats are wrong and out of sync with the HW in this case. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macsec: support multicast/broadcast when offloadingMark Starovoytov2020-03-271-13/+38
| | | | | | | | | | | The idea is simple. If the frame is an exact match for the controlled port (based on DA comparison), then we simply divert this skb to matching port. Multicast/broadcast messages are delivered to all ports. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macsec: allow multiple macsec devices with offloadDmitry Bogdanov2020-03-271-24/+1
| | | | | | | | | | Offload engine can setup several SecY. Each macsec interface shall have its own mac address. It will filter a traffic by dest mac address. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macsec: init secy pointer in macsec_contextDmitry Bogdanov2020-03-271-1/+15
| | | | | | | | | | This patch adds secy pointer initialization in the macsec_context. It will be used by MAC drivers in offloading operations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: macsec: add support for offloading to the MACAntoine Tenart2020-03-271-2/+11
| | | | | | | | | | | This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC, allowing a user to select a MAC as a provider for MACsec offloading operations. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2020-03-261-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
| * macsec: restrict to ethernet devicesWillem de Bruijn2020-03-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only attach macsec to ethernet devices. Syzbot was able to trigger a KMSAN warning in macsec_handle_frame by attaching to a phonet device. Macvlan has a similar check in macvlan_port_create. v1->v2 - fix commit message typo Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)Era Mayflower2020-03-161-13/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by: Era Mayflower <mayflowerera@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 20:20:34 +0100