summaryrefslogtreecommitdiffstats
path: root/drivers/net/mdio (follow)
Commit message (Collapse)AuthorAgeFilesLines
...
| * net: mdio: fix owner field for mdio buses registered using ACPIFlorian Fainelli2023-03-191-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | Bus ownership is wrong when using acpi_mdiobus_register() to register an mdio bus. That function is not inline, so when it calls mdiobus_register() the wrong THIS_MODULE value is captured. CC: Maxime Bizon <mbizon@freebox.fr> Fixes: 803ca24d2f92 ("net: mdio: Add ACPI support code for mdio") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mdio: fix owner field for mdio buses registered using device-treeMaxime Bizon2023-03-191-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | Bus ownership is wrong when using of_mdiobus_register() to register an mdio bus. That function is not inline, so when it calls mdiobus_register() the wrong THIS_MODULE value is captured. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") [florian: fix kdoc, added Fixes tag] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Use of_property_present() for testing DT property presenceRob Herring2023-03-141-2/+2
|/ | | | | | | | | | | | | | | It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230310144716.1544083-1-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dsa: seville: ignore mscc-miim read errors from Lynx PCSVladimir Oltean2023-02-261-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During the refactoring in the commit below, vsc9953_mdio_read() was replaced with mscc_miim_read(), which has one extra step: it checks for the MSCC_MIIM_DATA_ERROR bits before returning the result. On T1040RDB, there are 8 QSGMII PCSes belonging to the switch, and they are organized in 2 groups. First group responds to MDIO addresses 4-7 because QSGMIIACR1[MDEV_PORT] is 1, and the second group responds to MDIO addresses 8-11 because QSGMIIBCR1[MDEV_PORT] is 2. I have double checked that these values are correctly set in the SERDES, as well as PCCR1[QSGMA_CFG] and PCCR1[QSGMB_CFG] are both 0b01. mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 8 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 8 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 9 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 9 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 10 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 10 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 11 reg 0x1 MIIM_DATA 0x2d mscc_miim_read: phyad 11 reg 0x5 MIIM_DATA 0x5801 mscc_miim_read: phyad 4 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 4 reg 0x5 MIIM_DATA 0x3da01, ERROR mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 5 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 5 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 6 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 6 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR mscc_miim_read: phyad 7 reg 0x1 MIIM_DATA 0x3002d, ERROR mscc_miim_read: phyad 7 reg 0x5 MIIM_DATA 0x35801, ERROR As can be seen, the data in MIIM_DATA is still valid despite having the MSCC_MIIM_DATA_ERROR bits set. The driver as introduced in commit 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch") was ignoring these bits, perhaps deliberately (although unbeknownst to me). This is an old IP and the hardware team cannot seem to be able to help me track down a plausible reason for these failures. I'll keep investigating, but in the meantime, this is a direct regression which must be restored to a working state. The only thing I can do is keep ignoring the errors as before. Fixes: b99658452355 ("net: dsa: ocelot: felix: utilize shared mscc-miim driver for indirect MDIO access") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mdio: add amlogic gxl mdio mux supportJerome Brunet2023-02-013-0/+176
| | | | | | | | | | Add support for the mdio mux and internal phy glue of the GXL SoC family Reported-by: Da Xue <da@lessconfused.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: mdio: mux-meson-g12a: use __clk_is_enabled to simplify the codeHeiner Kallweit2023-01-301-8/+3
| | | | | | | | By using __clk_is_enabled () we can avoid defining an own variable for tracking whether enable counter is zero. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-01-281-7/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/intel/ice/ice_main.c 418e53401e47 ("ice: move devlink port creation/deletion") 643ef23bd9dd ("ice: Introduce local var for readability") https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/ https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/ drivers/net/ethernet/engleder/tsnep_main.c 3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues") 25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock") https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/ net/netfilter/nf_conntrack_proto_sctp.c 13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"") a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths") f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets") https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/ https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: mdio-mux-meson-g12a: force internal PHY off on mux switchJerome Brunet2023-01-261-7/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | Force the internal PHY off then on when switching to the internal path. This fixes problems where the PHY ID is not properly set. Fixes: 7090425104db ("net: phy: add amlogic g12a mdio mux support") Suggested-by: Qi Duan <qi.duan@amlogic.com> Co-developed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230124101157.232234-1-jbrunet@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mdio: mux-meson-g12a: use devm_clk_get_enabled to simplify the codeHeiner Kallweit2023-01-231-21/+6
| | | | | | | | | | | | | | | | Use devm_clk_get_enabled() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: mdiobus: Convert to use fwnode_device_is_compatible()Andy Shevchenko2023-01-231-6/+2
| | | | | | | | | | | | | | | | Replace open coded fwnode_device_is_compatible() in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Remove C45 check in C22 only MDIO bus driversAndrew Lunn2023-01-214-26/+0
| | | | | | | | | | | | | | | | | | | | The MDIO core should not pass a C45 request via the C22 API call any more. So remove the tests from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: phy: Remove probe_capabilitiesAndrew Lunn2023-01-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Deciding if to probe of PHYs using C45 is now determine by if the bus provides the C45 read method. This makes probe_capabilities redundant so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: mdio: cavium: Remove unneeded simicolonsAndrew Lunn2023-01-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The recent refactoring to split C22 and C45 introduced two unneeded semiconons which the kernel test bot reported. Remove them. Reported-by: kernel test robot <lkp@intel.com> Fixes: 93641ecbaa1f ("net: mdio: cavium: Separate C22 and C45 transactions") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20230115164203.510615-1-andrew@lunn.ch Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: mdio: ipq4019: Separate C22 and C45 transactionsAndrew Lunn2023-01-141-64/+90
| | | | | | | | | | | | | | | | | | | | The ipq4019 driver can perform both C22 and C45 transfers. Create separate functions for each and register the C45 versions using the new driver API calls. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mdio: aspeed: Separate C22 and C45 transactionsAndrew Lunn2023-01-141-35/+12
| | | | | | | | | | | | | | | | | | | | | | The aspeed MDIO bus driver can perform both C22 and C45 transfers. Modify the existing C45 functions to take the devad as a parameter, and remove the wrappers so there are individual C22 and C45 functions. Add the C45 functions to the new API calls. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mdio: mux-bcm-iproc: Separate C22 and C45 transactionsAndrew Lunn2023-01-141-11/+43
| | | | | | | | | | | | | | | | | | | | The MDIO mux broadcom iproc can perform both C22 and C45 transfers. Create separate functions for each and register the C45 versions using the new API calls. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mdio: i2c: Separate C22 and C45 transactionsAndrew Lunn2023-01-141-9/+23
| | | | | | | | | | | | | | | | | | | | The MDIO over I2C bus driver can perform both C22 and C45 transfers. Create separate functions for each and register the C45 versions using the new API calls. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mdio: cavium: Separate C22 and C45 transactionsAndrew Lunn2023-01-144-37/+95
| | | | | | | | | | | | | | | | | | | | The cavium IP can perform both C22 and C45 transfers. Create separate functions for each and register the C45 versions in both the octeon and thunder bus driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mdio: mdio-bitbang: Separate C22 and C45 transactionsAndrew Lunn2023-01-111-25/+52
|/ | | | | | | | | | | | | | | The bitbbanging bus driver can perform both C22 and C45 transfers. Create separate functions for each and register the C45 versions using the new driver API calls. The SH Ethernet driver places wrappers around these functions. In order to not break boards which might be using C45, add similar wrappers for C45 operations. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: mdio: fix unbalanced fwnode reference count in mdio_device_release()Zeng Heng2022-12-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | There is warning report about of_node refcount leak while probing mdio device: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@710700c0/ethernet@4 In of_mdiobus_register_device(), we increase fwnode refcount by fwnode_handle_get() before associating the of_node with mdio device, but it has never been decreased in normal path. Since that, in mdio_device_release(), it needs to call fwnode_handle_put() in addition instead of calling kfree() directly. After above, just calling mdio_device_free() in the error handle path of of_mdiobus_register_device() is enough to keep the refcount balanced. Fixes: a9049e0c513c ("mdio: Add support for mdio drivers.") Signed-off-by: Zeng Heng <zengheng4@huawei.com> Reviewed-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221203073441.3885317-1-zengheng4@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net: mdiobus: fix double put fwnode in the error pathYang Yingliang2022-12-051-1/+3
| | | | | | | | | | | | | | | | | If phy_device_register() or fwnode_mdiobus_phy_device_register() fail, phy_device_free() is called, the device refcount is decreased to 0, then fwnode_handle_put() will be called in phy_device_release(), but in the error path, fwnode_handle_put() has already been called, so set fwnode to NULL after fwnode_handle_put() in the error path to avoid double put. Fixes: cdde1560118f ("net: mdiobus: fix unbalanced node reference count") Reported-by: Zeng Heng <zengheng4@huawei.com> Tested-by: Zeng Heng <zengheng4@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Zeng Heng <zengheng4@huawei.com> Tested-by: Zeng Heng <zengheng4@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mdiobus: fix unbalanced node reference countYang Yingliang2022-11-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | I got the following report while doing device(mscc-miim) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0 If the 'fwnode' is not an acpi node, the refcount is get in fwnode_mdiobus_phy_device_register(), but it has never been put when the device is freed in the normal path. So call fwnode_handle_put() in phy_device_release() to avoid leak. If it's an acpi node, it has never been get, but it's put in the error path, so call fwnode_handle_get() before phy_device_register() to keep get/put operation balanced. Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221124150130.609420-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: mdiobus: search for PSE nodes by parsing PHY nodes.Oleksij Rempel2022-10-041-2/+35
| | | | | | | | | Some PHYs can be linked with PSE (Power Sourcing Equipment), so search for related nodes and attach it to the phydev. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: mdiobus: fwnode_mdiobus_register_phy() rework error handlingOleksij Rempel2022-10-041-9/+12
| | | | | | | | | Rework error handling as preparation for PSE patch. This patch should make it easier to extend this function. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: phy: mdio-i2c: support I2C MDIO protocol for RollBall SFP modulesMarek Behún2022-10-031-5/+305
| | | | | | | | | | | | | | | | | | | | Some multigig SFPs from RollBall and Hilink do not expose functional MDIO access to the internal PHY of the SFP via I2C address 0x56 (although there seems to be read-only clause 22 access on this address). Instead these SFPs PHY can be accessed via I2C via the SFP Enhanced Digital Diagnostic Interface - I2C address 0x51. The SFP_PAGE has to be selected to 3 and the password must be filled with 0xff bytes for this PHY communication to work. This extends the mdio-i2c driver to support this protocol by adding a special parameter to mdio_i2c_alloc function via which this RollBall protocol can be selected. Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-09-221-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * of: mdio: Add of_node_put() when breaking out of for_each_xxLiang He2022-09-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | In of_mdiobus_register(), we should call of_node_put() for 'child' escaped out of for_each_available_child_of_node(). Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral") Co-developed-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220913125659.3331969-1-windhl@126.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mdio: mux-multiplexer: Switch to use dev_err_probe() helperYang Yingliang2022-09-201-6/+3
| | | | | | | | | | | | | | | | | | | | dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220915065043.665138-3-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mdio: mux-mmioreg: Switch to use dev_err_probe() helperYang Yingliang2022-09-201-6/+3
| | | | | | | | | | | | | | | | | | | | dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220915065043.665138-2-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mdio: mux-meson-g12a: Switch to use dev_err_probe() helperYang Yingliang2022-09-201-13/+7
| | | | | | | | | | | | | | | | | | | | dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220915065043.665138-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge tag 'ib-mfd-net-pinctrl-v6.0' of ↵Jakub Kicinski2022-09-191-30/+12
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Lee Jones says: ==================== Immutable branch between MFD, Net and Pinctrl due for the v6.0 merge window * tag 'ib-mfd-net-pinctrl-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: ocelot: Add support for the vsc7512 chip via spi dt-bindings: mfd: ocelot: Add bindings for VSC7512 resource: add define macro for register address resources pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration pinctrl: microchip-sgpio: allow sgpio driver to be used as a module pinctrl: ocelot: add ability to be used in a non-mmio configuration net: mdio: mscc-miim: add ability to be used in a non-mmio configuration mfd: ocelot: Add helper to get regmap from a resource ==================== Link: https://lore.kernel.org/r/YxrjyHcceLOFlT/c@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: mdio: mscc-miim: add ability to be used in a non-mmio configurationColin Foster2022-09-091-30/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a few Ocelot chips that contain the logic for this bus, but are controlled externally. Specifically the VSC7511, 7512, 7513, and 7514. In the externally controlled configurations these registers are not memory-mapped. Add support for these non-memory-mapped configurations. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220905162132.2943088-3-colin.foster@in-advantage.com
* | Revert "net: mdio: Delete usage of driver_deferred_probe_check_state()"Saravana Kannan2022-08-231-1/+3
|/ | | | | | | | | | | | | | | | | | This reverts commit f8217275b57aa48d98cc42051c2aac34152718d6. There are a few more issues to fix that have been reported in the thread for the original series [1]. We'll need to fix those before this will work. So, revert it for now. [1] - https://lore.kernel.org/lkml/CAMuHMdWo_wRwV-i_iyTxVnEsf3Th9GBAG+wxUQMQGnw1t2ijTg@mail.gmail.com/ Fixes: f8217275b57a ("net: mdio: Delete usage of driver_deferred_probe_check_state()") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220819221616.2107893-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: mdio: Delete usage of driver_deferred_probe_check_state()Saravana Kannan2022-06-101-3/+1
| | | | | | | | | | | | | | Now that fw_devlink=on by default and fw_devlink supports interrupt properties, the execution will never get to the point where driver_deferred_probe_check_state() is called before the supplier has probed successfully or before deferred probe timeout has expired. So, delete the call and replace it with -ENODEV. Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20220601070707.3946847-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-05-051-1/+1
|\ | | | | | | | | | | | | | | | | tools/testing/selftests/net/forwarding/Makefile f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") 50fe062c806e ("selftests: forwarding: new test, verify host mdb entries") https://lore.kernel.org/all/20220502111539.0b7e4621@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: mdio: Fix ENOMEM return value in BCM6368 mux bus controllerNiels Dossche2022-04-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Error values inside the probe function must be < 0. The ENOMEM return value has the wrong sign: it is positive instead of negative. Add a minus sign. Fixes: e239756717b5 ("net: mdio: Add BCM6368 MDIO mux bus controller") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220428211931.8130-1-dossche.niels@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mdio: add reset control for Aspeed MDIODylan Hung2022-04-281-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | Add reset assertion/deassertion for Aspeed MDIO. There are 4 MDIO controllers embedded in Aspeed AST2600 SOC and share one reset control register SCU50[3]. To work with old DT blobs which don't have the reset property, devm_reset_control_get_optional_shared is used in this change. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni2022-04-151-0/+5
|\|
| * net: mdio: don't defer probe forever if PHY IRQ provider is missingVladimir Oltean2022-04-081-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a driver for an interrupt controller is missing, of_irq_get() returns -EPROBE_DEFER ad infinitum, causing fwnode_mdiobus_phy_device_register(), and ultimately, the entire of_mdiobus_register() call, to fail. In turn, any phy_connect() call towards a PHY on this MDIO bus will also fail. This is not what is expected to happen, because the PHY library falls back to poll mode when of_irq_get() returns a hard error code, and the MDIO bus, PHY and attached Ethernet controller work fine, albeit suboptimally, when the PHY library polls for link status. However, -EPROBE_DEFER has special handling given the assumption that at some point probe deferral will stop, and the driver for the supplier will kick in and create the IRQ domain. Reasons for which the interrupt controller may be missing: - It is not yet written. This may happen if a more recent DT blob (with an interrupt-parent for the PHY) is used to boot an old kernel where the driver didn't exist, and that kernel worked with the vintage-correct DT blob using poll mode. - It is compiled out. Behavior is the same as above. - It is compiled as a module. The kernel will wait for a number of seconds specified in the "deferred_probe_timeout" boot parameter for user space to load the required module. The current default is 0, which times out at the end of initcalls. It is possible that this might cause regressions unless users adjust this boot parameter. The proposed solution is to use the driver_deferred_probe_check_state() helper function provided by the driver core, which gives up after some -EPROBE_DEFER attempts, taking "deferred_probe_timeout" into consideration. The return code is changed from -EPROBE_DEFER into -ENODEV or -ETIMEDOUT, depending on whether the kernel is compiled with support for modules or not. Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral") Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220407165538.4084809-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mdio: mscc-miim: add local dev variable to cleanup probe functionColin Foster2022-04-091-15/+14
| | | | | | | | | | | | | | | | | | Create a local device *dev in order to not dereference the platform_device several times throughout the probe function. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mdio: aspeed: Add c45 supportPotin Lai2022-04-081-5/+32
| | | | | | | | | | | | | | | | Add Clause 45 support for Aspeed mdio driver. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: mdio: aspeed: Introduce read write function for c22 and c45Potin Lai2022-04-081-12/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add following additional functions to move out the implementation from aspeed_mdio_read() and aspeed_mdio_write(). c22: - aspeed_mdio_read_c22() - aspeed_mdio_write_c22() c45: - aspeed_mdio_read_c45() - aspeed_mdio_write_c45() Signed-off-by: Potin Lai <potin.lai@quantatw.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: mdio: aspeed: move reg accessing part into separate functionsPotin Lai2022-04-081-32/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add aspeed_mdio_op() and aseed_mdio_get_data() for register accessing. aspeed_mdio_op() handles operations, write command to control register, then check and wait operations is finished (bit 31 is cleared). aseed_mdio_get_data() fetchs the result value of operation from data register. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-04-081-0/+6
|\| | | | | | | | | | | No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: phy: mscc-miim: reject clause 45 register accessesMichael Walle2022-04-061-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | The driver doesn't support clause 45 register access yet, but doesn't check if the access is a c45 one either. This leads to spurious register reads and writes. Add the check. Fixes: 542671fe4d86 ("net: phy: mscc-miim: Add MDIO driver") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: mscc-miim: add support to set MDIO bus frequencyMichael Walle2022-04-061-2/+56
|/ | | | | | | | | | Until now, the MDIO bus will have the hardware default bus frequency. Read the desired frequency of the bus from the device tree and configure it. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mdio: mscc-miim: add lan966x internal phy reset supportMichael Walle2022-03-221-18/+49
| | | | | | | | | | | | | | | The LAN966x has two internal PHYs which are in reset by default. The driver already supported the internal PHYs of the SparX-5. Now add support for the LAN966x, too. Add a new compatible to distinguish them. The LAN966x has additional control bits in this register, thus convert the regmap_write() to regmap_update_bits() to leave the remaining bits untouched. This doesn't change anything for the SparX-5 SoC, because there, the register consists only of reset bits. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: mdio: mscc-miim: replace magic numbers for the bus resetMichael Walle2022-03-221-5/+5
| | | | | | | | | Replace the magic numbers by macros which are already defined. It seems the original commit missed to use them. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-03-171-1/+8
|\ | | | | | | | | | | No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: mdio: mscc-miim: fix duplicate debugfs entryMichael Walle2022-03-151-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver can have up to two regmaps. If the second one is registered its debugfs entry will have the same name as the first one and the following error will be printed: [ 3.833521] debugfs: Directory 'e200413c.mdio' with parent 'regmap' already present! Give the second regmap a name to avoid this. Fixes: a27a76282837 ("net: mdio: mscc-miim: convert to a regmap implementation") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220312224140.4173930-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-10 11:23:02 +0100