summaryrefslogtreecommitdiffstats
path: root/drivers/net/skge.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] skge: fix Yukon-Lite A0 workaroundStephen Hemminger2005-09-241-2/+20
| | | | | | | | | This is one of those workarounds sucked over from sk98lin driver. The skge driver needs to detect the Yukon-Lite A0 chip properly, and turn of Rx FIFO Flush. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: check length from PHYStephen Hemminger2005-09-221-82/+83
| | | | | | Cleanup receive buffer allocation and management, Add more error handling checks from PHY and bump version. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: expand ethtool debug register dumpStephen Hemminger2005-09-221-21/+8
| | | | | | | | | | Expand the returned data for ethtool debug access to include all of the mapped PCI area; except for the small set of registers that are for diagnostic RAM access. Access to those registers will hang the system. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: gmac register access errors in dual portStephen Hemminger2005-09-141-44/+54
| | | | | | | | | | | | | Merge of four previous patches and the Kconfig fix * Remove debug printk's * whitespace cleanup and version number change * clear interrupts, reset phy, and reset hardware on shutdown * ignore 64bit counter overflow interrupts * fix a couple of places where second port could clobber state of first port. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] r8169: avoid conflict between revisions 2 and 3 of the Linksys EG1032Francois Romieu2005-08-271-1/+1
| | | | | | | | | | | | Both revisions share the same PCI device ID and vendor ID but revision 2 of the device uses SysKonnect's chipset whereas revision 3 of the device uses Realtek's 8169 chipset. Credit goes to Christiaan Lutzer <mythtv.lutzer@gmail.com> for reporting the issue and giving the actual value for the different revisions. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: turn on link status LEDStephen Hemminger2005-08-161-1/+5
| | | | | | | Turn on the link status LED when link comes up. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: increase receive flush threshold defaultStephen Hemminger2005-08-161-1/+6
| | | | | | | | The flush threshold in the MAC chip should be increased. Found while reviewing vendor version of sk98lin driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: fibre vs copper detection cleanupStephen Hemminger2005-08-161-14/+12
| | | | | | | | | | | Cleanup the code that handles fibre vs copper detection. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> drivers/net/skge.c | 26 ++++++++++++-------------- drivers/net/skge.h | 11 ++--------- 2 files changed, 14 insertions(+), 23 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: stop bogus sensor messagesStephen Hemminger2005-08-161-14/+10
| | | | | | | | | | | | | | | Some versions of the Marvell yukon generate bogus sensor warning interrupts. The driver would flood log with these messages. Handle this situation cleanly by masking away at boot time. Fixes: http://bugs.gentoo.org/show_bug.cgi?id=87182 Signed-off-by: Stephen Hemminger <shemminger@osdl.org> drivers/net/skge.c | 24 ++++++++++-------------- drivers/net/skge.h | 8 ++++++-- 2 files changed, 16 insertions(+), 16 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: version 0.8Stephen Hemminger2005-07-311-1/+1
| | | | | | | Increase driver version to 0.8 Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: led toggle cleanupStephen Hemminger2005-07-311-96/+74
| | | | | | | | | Cleanup code that is used to toggle LED's. Since we get called from ethtool, can use that thread rather than setting up a timer. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: ignore phy interrupts during negotiationStephen Hemminger2005-07-311-3/+3
| | | | | | | | During autonegotiation set PHY interrupt mask to ignore bogus speed change interrupts. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: fifo control register access fixStephen Hemminger2005-07-311-7/+10
| | | | | | | | The code to clear fifo errors was incorrect and sending garbage to the external phy. Removed the no longer used inline's funcs. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: whitespace fixesStephen Hemminger2005-07-311-3/+3
| | | | | | | Minor whitespace cleanups. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: support yukon lite rev 4Stephen Hemminger2005-07-311-4/+4
| | | | | | | | | The check for Yukon lite changes was restricting itself to rev A3. It turns out that these changes are also true on A4 and later. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: phy lock deadlockStephen Hemminger2005-07-311-7/+4
| | | | | | | | | | | Cleanup the phy_lock deadlock because of relocking in the nway_reset path. Reported by Francois Romieu. Also, don't need to do irqsave/restore for blink, just excluding bh is good enough. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: disable tranmitter on shutdownStephen Hemminger2005-07-311-1/+1
| | | | | | | | Here is a fix for a typo, thanks Eliot Dresselhaus. Since transmitter not active when device is down, it wasn't really noticed. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: remove SK-9EE supportStephen Hemminger2005-07-311-1/+0
| | | | | | | | | The SK-9E boards use the Marvell Yukon2 chipset which is not supported by the skge driver. Thanks to Ralph Roesler for noticing. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] skge: silence mac data parity messagesStephen Hemminger2005-07-311-3/+9
| | | | | | | | Using Genesis board, I get harmless error reports. Rather than console error, turn it into a error counter. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] pm: more u32 vs. pm_message_t fixesPavel Machek2005-07-081-2/+2
| | | | | | | | Few more u32 vs. pm_message_t fixes. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] skge: version and copyright.Stephen Hemminger2005-06-281-2/+2
| | | | | | Bump version and copyright year. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: Rx buffer optimizationStephen Hemminger2005-06-281-103/+162
| | | | | | | Optimize the receive buffer management code to replenish the buffers immediately (like tg3). Signed-off-by: Stephen Hemmminger <shemminger@osdl.org>
* [PATCH] skge: handle Tx/Rx arbiter timeoutStephen Hemminger2005-06-281-0/+18
| | | | | | | | Need to handle receive and transmit packet arbiter timeouts. Transmit arbiter timeouts happens when Gigabit sends to 100Mbit port on same switch and pause occurs. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: add PHY related debug messagesStephen Hemminger2005-06-281-23/+33
| | | | | | | | Cleanup messages (for debug) about PHY interrrupts, because when user can't get driver working that is often the problem. Use a consistent way of enabling interrupts by port. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: make Genesis/Broadcom code workStephen Hemminger2005-06-281-255/+261
| | | | | | | | | Rewrite the code for handling the Broadcom PHY to something that works. Remove link polling because Broadcom and Yukon don't need it. When I wrote initial code, didn't have a genesis chipset based board to test, so it was a non-working guess. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: cleanup ethtool mode supportStephen Hemminger2005-06-281-60/+65
| | | | | | Unify mapping of supported modes based on hardware. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: remove XM phy (untested code)Stephen Hemminger2005-06-281-217/+138
| | | | | | | | Remove support for the non-Broadcom genesis based boards. The code is untested, and probably won't work as is. The newer boards are all Yukon based, and only old Genesis board I can find uses Broadcom. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: remove Yukon2 related special casesStephen Hemminger2005-06-281-47/+7
| | | | | | | Remove the bits and pieces added relating to Yukon II chipset. The Yukon 2 will be in a separate driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: remove unused declarationsStephen Hemminger2005-06-281-10/+2
| | | | | | | Get rid of definitions for chip versions and PHY chips that this driver does not support. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: eliminate Yukon2 hooksStephen Hemminger2005-06-281-10/+0
| | | | | | The Yukon chips don't support TSO, and Yukon2 will be a separate driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: replace chip_rev() accessorStephen Hemminger2005-06-281-26/+24
| | | | | | | Replace inline accessor functions for chip revision and number of ports with simple structure members. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: use pci_read_config_wordStephen Hemminger2005-06-281-3/+3
| | | | | | | Rather than accessing PCI config space through MMIO space, use the standard PCI functions. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: function amd macro name changeStephen Hemminger2005-06-281-236/+236
| | | | | | | | | | | | | | | The inlines and macro's needed some cleanup's and fixes: * change name of macro SKGEMAC_REG to SK_REG to better reflect usage and fix comments * ditto for SK_GEXM_REG -> SK_XMAC_REG and SKGEGMA_REG -> SK_GMA_REG * change skge_gm_ to just gm_ since it is just a local function and long names look ugly. * change skge_xm_ to just xm_ * fix xm_write32 to write as two u16's with correct byte order * fix xm_outaddr to correctly use offset Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: PCI_DEVICE() macroStephen Hemminger2005-06-281-22/+11
| | | | | | Use PCI_DEVICE() macro. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge: whietspace cleanupStephen Hemminger2005-06-281-23/+23
| | | | | | Cleanup whitespace around if() and switch() and end of lines Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
* [PATCH] skge 64bit portabilityAl Viro2005-05-161-3/+3
| | | | | ptrdiff_t is %td, not %d Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
* [PATCH] skge missing includeAl Viro2005-05-161-0/+1
| | | | Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
* [netdrvr] new driver skge, for SysKonnect cardsStephen Hemminger2005-05-131-0/+3385
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 22:46:48 +0100