summaryrefslogtreecommitdiffstats
path: root/drivers/net/usb (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net: usb: Correct reset handling of smsc95xxMarkus Reichl2022-01-141-1/+2
| | | | | | | | | | | | | | | | | On boards with LAN9514 and no preconfigured MAC address we don't get an ip address from DHCP after commit a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx") anymore. Adding an explicit reset before starting the phy fixes the issue. [1] https://lore.kernel.org/netdev/199eebbd6b97f52b9119c9fa4fd8504f8a34de18.camel@collabora.com/ From: Gabriel Hojda <ghojda@yo2urs.ro> Fixes: a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx") Signed-off-by: Gabriel Hojda <ghojda@yo2urs.ro> Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: Add Hucom Wireless HM-211S/KKyoungkyu Park2022-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Hucom Wireless HM-211S/K is an LTE module based on Qualcomm MDM9207. This module supports LTE Band 1, 3, 5, 7, 8 and WCDMA Band 1. Manual testing showed that only interface number two replies to QMI messages. T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22de ProdID=9051 Rev= 3.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Kyoungkyu Park <choryu.park@choryu.space> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/Yd+nxAA6KorDpQFv@choryu-tfx5470h Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: qmi_wwan: add ZTE MF286D modem 19d2:1485Pawel Dembicki2022-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=19d2 ProdID=1485 Rev=52.87 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=MF286DZTED000000 C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-01-101-2/+10
|\ | | | | | | | | | | | | Merge in fixes directly in prep for the 5.17 merge window. No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: mcs7830: handle usb read errors properlyPavel Skripkin2022-01-101-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Syzbot reported uninit value in mcs7830_bind(). The problem was in missing validation check for bytes read via usbnet_read_cmd(). usbnet_read_cmd() internally calls usb_control_msg(), that returns number of bytes read. Code should validate that requested number of bytes was actually read. So, this patch adds missing size validation check inside mcs7830_get_reg() to prevent uninit value bugs Reported-and-tested-by: syzbot+003c0a286b9af5412510@syzkaller.appspotmail.com Fixes: 2a36d7083438 ("USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220106225716.7425-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-01-052-3/+11
|\| | | | | | | | | | | No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"Aaron Ma2022-01-051-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit f77b83b5bbab53d2be339184838b19ed2c62c0a5. This change breaks multiple usb to ethernet dongles attached on Lenovo USB hub. Fixes: f77b83b5bbab ("net: usb: r8152: Add MAC passthrough support for more Lenovo Docks") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Link: https://lore.kernel.org/r/20220105155102.8557-1-aaron.ma@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * rndis_host: support Hytera digital radiosThomas Toye2022-01-021-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hytera makes a range of digital (DMR) radios. These radios can be programmed to a allow a computer to control them over Ethernet over USB, either using NCM or RNDIS. This commit adds support for RNDIS for Hytera radios. I tested with a Hytera PD785 and a Hytera MD785G. When these radios are programmed to set up a Radio to PC Network using RNDIS, an USB interface will be added with class 2 (Communications), subclass 2 (Abstract Modem Control) and an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT RNDIS?"). This patch is similar to the solution of this StackOverflow user, but that only works for the Hytera MD785: https://stackoverflow.com/a/53550858 To use the "Radio to PC Network" functionality of Hytera DMR radios, the radios need to be programmed correctly in CPS (Hytera's Customer Programming Software). "Forward to PC" should be checked in "Network" (under "General Setting" in "Conventional") and the "USB Network Communication Protocol" should be set to RNDIS. Signed-off-by: Thomas Toye <thomas@toye.io> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-12-301-2/+2
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/net/ethernet/mellanox/mlx5/core/en_tc.c commit 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port") commit 31108d142f36 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'") commit 4390c6edc0fb ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'") https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/ net/smc/smc_wr.c commit 49dc9013e34b ("net/smc: Use the bitmap API when applicable") commit 349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock") bitmap_zero()/memset() is removed by the fix Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: usb: pegasus: Do not drop long Ethernet framesMatthias-Christian Ott2021-12-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The D-Link DSB-650TX (2001:4002) is unable to receive Ethernet frames that are longer than 1518 octets, for example, Ethernet frames that contain 802.1Q VLAN tags. The frames are sent to the pegasus driver via USB but the driver discards them because they have the Long_pkt field set to 1 in the received status report. The function read_bulk_callback of the pegasus driver treats such received "packets" (in the terminology of the hardware) as errors but the field simply does just indicate that the Ethernet frame (MAC destination to FCS) is longer than 1518 octets. It seems that in the 1990s there was a distinction between "giant" (> 1518) and "runt" (< 64) frames and the hardware includes flags to indicate this distinction. It seems that the purpose of the distinction "giant" frames was to not allow infinitely long frames due to transmission errors and to allow hardware to have an upper limit of the frame size. However, the hardware already has such limit with its 2048 octet receive buffer and, therefore, Long_pkt is merely a convention and should not be treated as a receive error. Actually, the hardware is even able to receive Ethernet frames with 2048 octets which exceeds the claimed limit frame size limit of the driver of 1536 octets (PEGASUS_MTU). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Matthias-Christian Ott <ott@mirix.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-12-242-7/+44
|\| | | | | | | | | | | | | | | | | include/net/sock.h commit 8f905c0e7354 ("inet: fully convert sk->sk_rx_dst to RCU rules") commit 43f51df41729 ("net: move early demux fields close to sk_refcnt") https://lore.kernel.org/all/20211222141641.0caa0ab3@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * r8152: sync ocp baseHayes Wang2021-12-231-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | There are some chances that the actual base of hardware is different from the value recorded by driver, so we have to reset the variable of ocp_base to sync it. Set ocp_base to -1. Then, it would be updated and the new base would be set to the hardware next time. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * r8152: fix the force speed doesn't work for RTL8156Hayes Wang2021-12-231-0/+17
| | | | | | | | | | | | | | | | | | It needs to set mdio force mode. Otherwise, link off always occurs when setting force speed. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * asix: fix wrong return value in asix_check_host_enable()Pavel Skripkin2021-12-221-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If asix_read_cmd() returns 0 on 30th interation, 0 will be returned from asix_check_host_enable(), which is logically wrong. Fix it by returning -ETIMEDOUT explicitly if we have exceeded 30 iterations Also, replaced 30 with #define as suggested by Andrew Fixes: a786e3195d6a ("net: asix: fix uninit value bugs") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/ecd3470ce6c2d5697ac635d0d3b14a47defb4acb.1640117288.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * asix: fix uninit-value in asix_mdio_read()Pavel Skripkin2021-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | asix_read_cmd() may read less than sizeof(smsr) bytes and in this case smsr will be uninitialized. Fail log: BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] BUG: KMSAN: uninit-value in asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 BUG: KMSAN: uninit-value in asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] asix_check_host_enable drivers/net/usb/asix_common.c:82 [inline] drivers/net/usb/asix_common.c:497 asix_mdio_read+0x3c1/0xb00 drivers/net/usb/asix_common.c:497 drivers/net/usb/asix_common.c:497 Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter") Reported-and-tested-by: syzbot+f44badb06036334e867a@syzkaller.appspotmail.com Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/8966e3b514edf39857dd93603fc79ec02e000a75.1640117288.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-12-172-0/+7
|\| | | | | | | | | | | No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: usb: lan78xx: add Allied Telesis AT29M2-AFGreg Jesionowski2021-12-161-0/+6
| | | | | | | | | | | | | | | | | | This adds the vendor and product IDs for the AT29M2-AF which is a lan7801-based device. Signed-off-by: Greg Jesionowski <jesionowskigreg@gmail.com> Link: https://lore.kernel.org/r/20211214221027.305784-1-jesionowskigreg@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: usb: qmi_wwan: add Telit 0x1070 compositionDaniele Palmas2021-12-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | Add the following Telit FN990 composition: 0x1070: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20211210095722.22269-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-12-091-0/+2
|\| | | | | | | | | | | No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zeroLee Jones2021-12-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, due to the sequential use of min_t() and clamp_t() macros, in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic sets tx_max to 0. This is then used to allocate the data area of the SKB requested later in cdc_ncm_fill_tx_frame(). This does not cause an issue presently because when memory is allocated during initialisation phase of SKB creation, more memory (512b) is allocated than is required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172 \ head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106 <snip> Call Trace: <IRQ> skb_over_panic+0x2c/0x30 net/core/skbuff.c:115 skb_put+0x205/0x210 net/core/skbuff.c:1877 skb_put_zero include/linux/skbuff.h:2270 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline] cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293 cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514 By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX when not offered through the system provided params, we ensure enough data space is allocated to handle the CDC data, meaning no crash will occur. Cc: Oliver Neukum <oliver@neukum.org> Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-12-021-1/+1
|\| | | | | | | Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: usb: lan78xx: lan78xx_phy_init(): use PHY_POLL instead of "0" if no IRQ ↵Sven Schuchmann2021-11-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | is available On most systems request for IRQ 0 will fail, phylib will print an error message and fall back to polling. To fix this set the phydev->irq to PHY_POLL if no IRQ is available. Fixes: cc89c323a30e ("lan78xx: Use irq_domain for phy interrupt from USB Int. EP") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-11-261-29/+26
|\| | | | | | | | | | | | | | | | | | | drivers/net/ipa/ipa_main.c 8afc7e471ad3 ("net: ipa: separate disabling setup from modem stop") 76b5fbcd6b47 ("net: ipa: kill ipa_modem_init()") Duplicated include, drop one. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: usb: Correct PHY handling of smsc95xxMartyn Welch2021-11-231-29/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The smsc95xx driver is dropping phy speed settings and causing a stack trace at device unbind: [  536.379147] smsc95xx 2-1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.2-1, smsc95xx USB 2.0 Ethernet [  536.425029] ------------[ cut here ]------------ [  536.429650] WARNING: CPU: 0 PID: 439 at fs/kernfs/dir.c:1535 kernfs_remove_by_name_ns+0xb8/0xc0 [  536.438416] kernfs: can not remove 'attached_dev', no directory [  536.444363] Modules linked in: xts dm_crypt dm_mod atmel_mxt_ts smsc95xx usbnet [  536.451748] CPU: 0 PID: 439 Comm: sh Tainted: G        W         5.15.0 #1 [  536.458636] Hardware name: Freescale i.MX53 (Device Tree Support) [  536.464735] Backtrace:  [  536.467190] [<80b1c904>] (dump_backtrace) from [<80b1cb48>] (show_stack+0x20/0x24) [  536.474787]  r7:000005ff r6:8035b294 r5:600f0013 r4:80d8af78 [  536.480449] [<80b1cb28>] (show_stack) from [<80b1f764>] (dump_stack_lvl+0x48/0x54) [  536.488035] [<80b1f71c>] (dump_stack_lvl) from [<80b1f788>] (dump_stack+0x18/0x1c) [  536.495620]  r5:00000009 r4:80d9b820 [  536.499198] [<80b1f770>] (dump_stack) from [<80124fac>] (__warn+0xfc/0x114) [  536.506187] [<80124eb0>] (__warn) from [<80b1d21c>] (warn_slowpath_fmt+0xa8/0xdc) [  536.513688]  r7:000005ff r6:80d9b820 r5:80d9b8e0 r4:83744000 [  536.519349] [<80b1d178>] (warn_slowpath_fmt) from [<8035b294>] (kernfs_remove_by_name_ns+0xb8/0xc0) [  536.528416]  r9:00000001 r8:00000000 r7:824926dc r6:00000000 r5:80df6c2c r4:00000000 [  536.536162] [<8035b1dc>] (kernfs_remove_by_name_ns) from [<80b1f56c>] (sysfs_remove_link+0x4c/0x50) [  536.545225]  r6:7f00f02c r5:80df6c2c r4:83306400 [  536.549845] [<80b1f520>] (sysfs_remove_link) from [<806f9c8c>] (phy_detach+0xfc/0x11c) [  536.557780]  r5:82492000 r4:83306400 [  536.561359] [<806f9b90>] (phy_detach) from [<806f9cf8>] (phy_disconnect+0x4c/0x58) [  536.568943]  r7:824926dc r6:7f00f02c r5:82492580 r4:83306400 [  536.574604] [<806f9cac>] (phy_disconnect) from [<7f00a310>] (smsc95xx_disconnect_phy+0x30/0x38 [smsc95xx]) [  536.584290]  r5:82492580 r4:82492580 [  536.587868] [<7f00a2e0>] (smsc95xx_disconnect_phy [smsc95xx]) from [<7f001570>] (usbnet_stop+0x70/0x1a0 [usbnet]) [  536.598161]  r5:82492580 r4:82492000 [  536.601740] [<7f001500>] (usbnet_stop [usbnet]) from [<808baa70>] (__dev_close_many+0xb4/0x12c) [  536.610466]  r8:83744000 r7:00000000 r6:83744000 r5:83745b74 r4:82492000 [  536.617170] [<808ba9bc>] (__dev_close_many) from [<808bab78>] (dev_close_many+0x90/0x120) [  536.625365]  r7:00000001 r6:83745b74 r5:83745b8c r4:82492000 [  536.631026] [<808baae8>] (dev_close_many) from [<808bf408>] (unregister_netdevice_many+0x15c/0x704) [  536.640094]  r9:00000001 r8:81130b98 r7:83745b74 r6:83745bc4 r5:83745b8c r4:82492000 [  536.647840] [<808bf2ac>] (unregister_netdevice_many) from [<808bfa50>] (unregister_netdevice_queue+0xa0/0xe8) [  536.657775]  r10:8112bcc0 r9:83306c00 r8:83306c80 r7:8291e420 r6:83744000 r5:00000000 [  536.665608]  r4:82492000 [  536.668143] [<808bf9b0>] (unregister_netdevice_queue) from [<808bfac0>] (unregister_netdev+0x28/0x30) [  536.677381]  r6:7f01003c r5:82492000 r4:82492000 [  536.682000] [<808bfa98>] (unregister_netdev) from [<7f000b40>] (usbnet_disconnect+0x64/0xdc [usbnet]) [  536.691241]  r5:82492000 r4:82492580 [  536.694819] [<7f000adc>] (usbnet_disconnect [usbnet]) from [<8076b958>] (usb_unbind_interface+0x80/0x248) [  536.704406]  r5:7f01003c r4:83306c80 [  536.707984] [<8076b8d8>] (usb_unbind_interface) from [<8061765c>] (device_release_driver_internal+0x1c4/0x1cc) [  536.718005]  r10:8112bcc0 r9:80dff1dc r8:83306c80 r7:83744000 r6:7f01003c r5:00000000 [  536.725838]  r4:8291e420 [  536.728373] [<80617498>] (device_release_driver_internal) from [<80617684>] (device_release_driver+0x20/0x24) [  536.738302]  r7:83744000 r6:810d4f4c r5:8291e420 r4:8176ae30 [  536.743963] [<80617664>] (device_release_driver) from [<806156cc>] (bus_remove_device+0xf0/0x148) [  536.752858] [<806155dc>] (bus_remove_device) from [<80610018>] (device_del+0x198/0x41c) [  536.760880]  r7:83744000 r6:8116e2e4 r5:8291e464 r4:8291e420 [  536.766542] [<8060fe80>] (device_del) from [<80768fe8>] (usb_disable_device+0xcc/0x1e0) [  536.774576]  r10:8112bcc0 r9:80dff1dc r8:00000001 r7:8112bc48 r6:8291e400 r5:00000001 [  536.782410]  r4:83306c00 [  536.784945] [<80768f1c>] (usb_disable_device) from [<80769c30>] (usb_set_configuration+0x514/0x8dc) [  536.794011]  r10:00000000 r9:00000000 r8:832c3600 r7:00000004 r6:810d5688 r5:00000000 [  536.801844]  r4:83306c00 [  536.804379] [<8076971c>] (usb_set_configuration) from [<80775fac>] (usb_generic_driver_disconnect+0x34/0x38) [  536.814236]  r10:832c3610 r9:83745ef8 r8:832c3600 r7:00000004 r6:810d5688 r5:83306c00 [  536.822069]  r4:83306c00 [  536.824605] [<80775f78>] (usb_generic_driver_disconnect) from [<8076b850>] (usb_unbind_device+0x30/0x70) [  536.834100]  r5:83306c00 r4:810d5688 [  536.837678] [<8076b820>] (usb_unbind_device) from [<8061765c>] (device_release_driver_internal+0x1c4/0x1cc) [  536.847432]  r5:822fb480 r4:83306c80 [  536.851009] [<80617498>] (device_release_driver_internal) from [<806176a8>] (device_driver_detach+0x20/0x24) [  536.860853]  r7:00000004 r6:810d4f4c r5:810d5688 r4:83306c80 [  536.866515] [<80617688>] (device_driver_detach) from [<80614d98>] (unbind_store+0x70/0xe4) [  536.874793] [<80614d28>] (unbind_store) from [<80614118>] (drv_attr_store+0x30/0x3c) [  536.882554]  r7:00000000 r6:00000000 r5:83739200 r4:80614d28 [  536.888217] [<806140e8>] (drv_attr_store) from [<8035cb68>] (sysfs_kf_write+0x48/0x54) [  536.896154]  r5:83739200 r4:806140e8 [  536.899732] [<8035cb20>] (sysfs_kf_write) from [<8035be84>] (kernfs_fop_write_iter+0x11c/0x1d4) [  536.908446]  r5:83739200 r4:00000004 [  536.912024] [<8035bd68>] (kernfs_fop_write_iter) from [<802b87fc>] (vfs_write+0x258/0x3e4) [  536.920317]  r10:00000000 r9:83745f58 r8:83744000 r7:00000000 r6:00000004 r5:00000000 [  536.928151]  r4:82adacc0 [  536.930687] [<802b85a4>] (vfs_write) from [<802b8b0c>] (ksys_write+0x74/0xf4) [  536.937842]  r10:00000004 r9:007767a0 r8:83744000 r7:00000000 r6:00000000 r5:82adacc0 [  536.945676]  r4:82adacc0 [  536.948213] [<802b8a98>] (ksys_write) from [<802b8ba4>] (sys_write+0x18/0x1c) [  536.955367]  r10:00000004 r9:83744000 r8:80100244 r7:00000004 r6:76f47b58 r5:76fc0350 [  536.963200]  r4:00000004 [  536.965735] [<802b8b8c>] (sys_write) from [<80100060>] (ret_fast_syscall+0x0/0x48) [  536.973320] Exception stack(0x83745fa8 to 0x83745ff0) [  536.978383] 5fa0:                   00000004 76fc0350 00000001 007767a0 00000004 00000000 [  536.986569] 5fc0: 00000004 76fc0350 76f47b58 00000004 76f47c7c 76f48114 00000000 7e87991c [  536.994753] 5fe0: 00000498 7e879908 76e6dce8 76eca2e8 [  536.999922] ---[ end trace 9b835d809816b435 ]--- The driver should not be connecting and disconnecting the PHY when the device is opened and closed, it should be stopping and starting the PHY. The phy should be connected as part of binding and disconnected during unbinding. As this results in the PHY not being reset during open, link speed, etc. settings set prior to the link coming up are now not being lost. It is necessary for phy_stop() to only be called when the phydev still exists (resolving the above stack trace). When unbinding, ".unbind" will be called prior to ".stop", with phy_disconnect() already having called phy_stop() before the phydev becomes inaccessible. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Cc: UNGLinuxDriver@microchip.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: stable@kernel.org # v5.15 Signed-off-by: David S. Miller <davem@davemloft.net>
* | lan78xx: Clean up some inconsistent indentingJiapeng Chong2021-11-241-2/+1
| | | | | | | | | | | | | | | | | | | | | | Eliminate the follow smatch warning: drivers/net/usb/lan78xx.c:4961 lan78xx_resume() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen2021-11-221-2/+6
| | | | | | | | | | | | | | | | | | | | Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-11-181-6/+3
|\| | | | | | | Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: usb: r8152: Add MAC passthrough support for more Lenovo DocksAaron Ma2021-11-171-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | Like ThinkaPad Thunderbolt 4 Dock, more Lenovo docks start to use the original Realtek USB ethernet chip ID 0bda:8153. Lenovo Docks always use their own IDs for usb hub, even for older Docks. If parent hub is from Lenovo, then r8152 should try MAC passthrough. Verified on Lenovo TBT3 dock too. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | lan78xx: Introduce NAPI polling supportJohn Efstathiades2021-11-181-68/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces a NAPI-style approach for processing completed Rx URBs that contributes to improving driver throughput and reducing CPU load. Packets in completed URBs are copied to NAPI SKBs and passed to the network stack for processing. Each frame passed to the stack is one work item in the NAPI budget. If the NAPI budget is consumed and frames remain, they are added to an overflow queue that is processed at the start of the next NAPI polling cycle. The NAPI handler is also responsible for copying pending Tx data to Tx URBs and submitting them to the USB host controller for transmission. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | lan78xx: Remove hardware-specific header updateJohn Efstathiades2021-11-181-35/+16
| | | | | | | | | | | | | | | | | | | | Remove hardware-specific header length adjustment as it is no longer required. It also breaks generic receive offload (GRO) processing of received TCP frames that results in a TCP ACK being sent for each received frame. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | lan78xx: Re-order rx_submit() to remove forward declarationJohn Efstathiades2021-11-181-54/+52
| | | | | | | | | | | | | | | | Move position of rx_submit() to remove forward declaration of rx_complete() which is now no longer required. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | lan78xx: Introduce Rx URB processing improvementsJohn Efstathiades2021-11-181-116/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces a new approach to allocating and managing Rx URBs that contributes to improving driver throughput and reducing CPU load. A pool of Rx URBs is created during driver instantiation. All the URBs are initially submitted to the USB host controller for processing. The default URB buffer size is different for each USB bus speed. The chosen sizes provide good USB utilisation with little impact on overall packet latency. Completed URBs are processed in the driver bottom half. The URB buffer contents are copied to a dynamically allocated SKB, which is then passed to the network stack. The URB is then re-submitted to the USB host controller. NOTE: the call to skb_copy() in rx_process() that copies the URB contents to a new SKB is a temporary change to make this patch work in its own right. This call will be removed when the NAPI processing is introduced by patch 6 in this patch set. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | lan78xx: Introduce Tx URB processing improvementsJohn Efstathiades2021-11-181-213/+461
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces a new approach to allocating and managing Tx URBs that contributes to improving driver throughput and reducing CPU load. A pool of Tx URBs is created during driver instantiation. A URB is allocated from the pool when there is data to transmit. The URB is released back to the pool when the data has been transmitted by the device. The default URB buffer size is different for each USB bus speed. The chosen sizes provide good USB utilisation with little impact on overall packet latency. SKBs to be transmitted are added to a pending queue for processing. The driver tracks the available Tx URB buffer space and copies as much pending data as possible into each free URB. Each full URB is then submitted to the USB host controller for transmission. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | lan78xx: Fix memory allocation bugJohn Efstathiades2021-11-181-17/+21
| | | | | | | | | | | | | | Fix memory allocation that fails to check for NULL return. Signed-off-by: John Efstathiades <john.efstathiades@pebblebay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: usb: ax88179_178a: add TSO featureJacky Chou2021-11-151-6/+11
|/ | | | | | | | | | | | On low-effciency embedded platforms, transmission performance is poor due to on Bulk-out with single packet. Adding TSO feature improves the transmission performance and reduces the number of interrupt caused by Bulk-out complete. Reference to module, net: usb: aqc111. Signed-off-by: Jacky Chou <jackychou@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-10-282-0/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * usbnet: fix error return code in usbnet_probe()Wang Hai2021-10-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | Return error code if usb_maxpacket() returns 0 in usbnet_probe() Fixes: 397430b50a36 ("usbnet: sanity check for maxpacket") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211026124015.3025136-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: lan78xx: fix division by zero in send pathJohan Hovold2021-10-261-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in lan78xx_tx_bh() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: stable@vger.kernel.org # 4.3 Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | usbb: catc: use correct API for MAC addressesOliver Neukum2021-10-251-5/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. In the case of catc we need a new temporary buffer to conform to the rules for DMA coherency. That in turn necessitates a reworking of error handling in probe(). Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: usb: don't write directly to netdev->dev_addrJakub Kicinski2021-10-228-13/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Manually fix all net/usb drivers without separate maintainers. v2: catc does DMA to the buffer, leave the conversion to Oliver Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: qmi_wwan: use dev_addr_mod()Jakub Kicinski2021-10-221-2/+5
| | | | | | | | | | | | | | | | | | | | Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | usb: smsc: use eth_hw_addr_set()Jakub Kicinski2021-10-222-4/+8
| | | | | | | | | | | | | | | | | | Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2021-10-222-0/+5
|\| | | | | | | | | | | | | | | Lots of simnple overlapping additions. With a build fix from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
| * usbnet: sanity check for maxpacketOliver Neukum2021-10-211-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * lan78xx: select CRC32Vegard Nossum2021-10-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/usb/lan78xx.o: in function `lan78xx_set_multicast': lan78xx.c:(.text+0x48cf): undefined reference to `crc32_le' The actual use of crc32_le() comes indirectly through ether_crc(). Fixes: 55d7de9de6c30 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-10-151-0/+4
|\| | | | | | | | | | | | | | | tools/testing/selftests/net/ioam6.sh 7b1700e009cc ("selftests: net: modify IOAM tests for undef bits") bf77b1400a56 ("selftests: net: Test for the IOAM encapsulation with IPv6") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * r8152: select CRC32 and CRYPTO/CRYPTO_HASH/CRYPTO_SHA256Vegard Nossum2021-10-121-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following build/link errors by adding a dependency on CRYPTO, CRYPTO_HASH, CRYPTO_SHA256 and CRC32: ld: drivers/net/usb/r8152.o: in function `rtl8152_fw_verify_checksum': r8152.c:(.text+0x2b2a): undefined reference to `crypto_alloc_shash' ld: r8152.c:(.text+0x2bed): undefined reference to `crypto_shash_digest' ld: r8152.c:(.text+0x2c50): undefined reference to `crypto_destroy_tfm' ld: drivers/net/usb/r8152.o: in function `_rtl8152_set_rx_mode': r8152.c:(.text+0xdcb0): undefined reference to `crc32_le' Fixes: 9370f2d05a2a1 ("r8152: support request_firmware for RTL8153") Fixes: ac718b69301c7 ("net/usb: new driver for RTL8152") Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ethernet: manually convert memcpy(dev_addr,..., sizeof(addr))Jakub Kicinski2021-10-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | A handful of drivers use sizeof(addr) for the size of the address, after manually confirming the size is indeed 6 convert them to eth_hw_addr_set(). Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Petko Manolov <petkan@nucleusys.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ethernet: constify references to netdev->dev_addr in driversJakub Kicinski2021-10-146-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: remove single-byte netdev->dev_addr writesJakub Kicinski2021-10-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the drivers which use single-byte netdev addresses (netdev->addr_len == 1) use the appropriate address setting helpers. arcnet copies from int variables and io reads a lot, so add a helper for arcnet drivers to use. Similar helper could be reused for phonet and appletalk but there isn't any good central location where we could put it, and netdevice.h is already very crowded. Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for HSI Link: https://lore.kernel.org/r/20211012142757.4124842-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-10 03:06:02 +0100