summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi (follow)
Commit message (Collapse)AuthorAgeFilesLines
* iwlwifi: change check triggering device restart after rfkill changeReinette Chatre2009-04-221-1/+1
| | | | | | | | | | | | | | | | | The STATUS_ALIVE value cannot be used because it is cleared when interface is brought down and will not be set if rfkill is enabled when interface is started again. The interface can thus not be brought up if rfkill was enabled before stopping the interface and disabled after starting the interface. Change the test to use priv->is_open instead, this will be set when interface is started whether rfkill is enabled or not. Thanks to Helmut Schaa for the suggested fix. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rfkill: remove user_claim stuffJohannes Berg2009-04-221-1/+0
| | | | | | | | | | | Almost all drivers do not support user_claim, so remove it completely and always report -EOPNOTSUPP to userspace. Since userspace cannot really drive rfkill _anyway_ (due to the odd restrictions imposed by the documentation) having this code is just pointless. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: use iwl_mac_conf_txAbhijeet Kolekar2009-04-224-90/+46
| | | | | | | | 3945 now uses iwl_mac_conf_tx. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: merge and better support of suspend/resume for iwlagn and iwl3945Wey-Yi Guy2009-04-226-108/+56
| | | | | | | | | | | | | | | | | With mac80211's help to call stop() and start() in mac80211 suspend/resume function, both iwlagn and iwl3945 no longer calling stop() and start(); remove un-necessary STATUS_IN_SUSPEND bit from both header files and functions, Move apm_ops.stop() function into pci_suspend() to ensure DMA is stopped before go into suspend mode. iwl3945 has the similar suspend/resume function as iwlagn, so move both functions to iwlcore to be shared by both drivers. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945-base.c: Add missing space to debug printJoe Perches2009-04-201-1/+1
| | | | | | | "not" is not printed without a space after %pM Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* fix iwl3945 registration regressionJohannes Berg2009-04-161-0/+2
| | | | | | | I forgot that iwl3945 registration is separate from iwlagn. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang2009-04-071-2/+2
| | | | | | | | Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* trivial: Fix misspelling of firmwareNick Andrew2009-03-302-2/+2
| | | | | | | Fix misspelling of firmware. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* mac80211/iwlwifi: move virtual A-MDPU queue bookkeeping to iwlwifiJohannes Berg2009-03-288-16/+71
| | | | | | | | | | | | | | | | | | This patch removes all the virtual A-MPDU-queue bookkeeping from mac80211. Curiously, iwlwifi already does its own bookkeeping, so it doesn't require much changes except where it needs to handle starting and stopping the queues in mac80211. To handle the queue stop/wake properly, we rewrite the software queue number for aggregation frames and internally to iwlwifi keep track of the queues that map into the same AC queue, and only talk to mac80211 about the AC queue. The implementation requires calling two new functions, iwl_stop_queue and iwl_wake_queue instead of the mac80211 counterparts. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Reinette Chattre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: show current driver status in user readable formatWey-Yi Guy2009-03-281-1/+53
| | | | | | | | | change the display of current driver status bit to user readable format for better and easier debugging Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: replace stations with stations_39Abhijeet Kolekar2009-03-281-3/+3
| | | | | | | | A *leftover* stations is replaced with stations_39. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: report error when detect failure during stop agg queueWey-Yi Guy2009-03-283-3/+7
| | | | | | | | | | | | This fix related to bug 1921 at http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1921 when detect error during stopping tx aggregation queue, report the error to help identify the problem. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: control rate decreaseAbhijeet Kolekar2009-03-281-7/+6
| | | | | | | | | Control the rate decrease. Do not decrease the rate fast. Use success_ratio for rate scaling :) Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: fix checkpatch.pl errorsAbhijeet Kolekar2009-03-282-2/+2
| | | | | | | | Patch fixes two checkpatch.pl errors. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: use iwl_cmd_queue_freeAbhijeet Kolekar2009-03-283-8/+10
| | | | | | | | | iwl_cmd_queue_free needs to be used to free up the cmd_queue, as TFD slots for cmd_queue and tx_queue are different. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: set TFD_QUEUE_MAX to correct valueAbhijeet Kolekar2009-03-282-4/+7
| | | | | | | | | | Total number of queues is 8 but only 7 of them are TX queues. 4 AC(Data) queue ,1 CMD and 2 HCCA. The HCCA queues are not used. max_txq_num is set to maximum usable TX queues. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: support 11hMohamed Abbas2009-03-282-1/+3
| | | | | | | | | Set IEEE80211_HW_SPECTRUM_MGMT bit in hw->flags, this tell mac80211 we support spectrum mgmt. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlcore: dont commit power command if interface is not upMohamed Abbas2009-03-281-1/+1
| | | | | | | | | If user set new power level, accept the new power level and only send command to host if the interface is up and radio on. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: allow power level setting all the timesMohamed Abbas2009-03-282-10/+0
| | | | | | | | allow user to set power level at all times Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: return 0 for AMPDU_TX/RX_STOP request if NIC is going downWey-Yi Guy2009-03-281-2/+11
| | | | | | | | | | | When receive IEEE80211_AMPDU_RX_STOP or IEEE80211_AMPDU_TX_STOP request in iwl_mac_ampdu_action() from mac80211; check STATUS_EXIT_PENDING bit, if NIC is on the way out, then return 0 back to mac80211, this can prevent mac80211 report HW error incorrectly. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: use changed in iwl3945_mac_configMohamed Abbas2009-03-281-8/+12
| | | | | | | | | In function iwl3945_mac_config use changed flag to call only the affected functions. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: use changed in mac_configMohamed Abbas2009-03-282-80/+85
| | | | | | | | | | | In function iwl_mac_config use changed flag to call only the affected functions. This patch also allow user to cache channel, txpower and power value when the interface is not ready and apply the changes once the interface ready. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: correct log level when error occursReinette Chatre2009-03-161-1/+1
| | | | | | | user needs to see this message even if debugging disabled Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: print contents of control register when error occursReinette Chatre2009-03-161-1/+3
| | | | | | | hopefully the register contents will guide us to why this failure occured Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: fix warning when set WEP keyMohamed Abbas2009-03-161-0/+7
| | | | | | | | | | | | iwl_clear_station_table will be called every time rxon called. In this function ucode_key_table is set to 0 even though a static WEP security is set. This will cause in many warning and might be an issue if dynamic WEP is set. This patch make sure we keep track of all existing static WEP when this function is called. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: unmap previously mapped memoryReinette Chatre2009-03-161-1/+9
| | | | | | | | | During preparation of TX we create DMA mapping to TX command as part of preparing the TFD. This mapping needs to be cleared at the time TFD is freed. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: use iwl_tx_cmd_completeAbhijeet Kolekar2009-03-161-80/+1
| | | | | | | | | | iwl3945 uses iwl_tx_cmd_complete to reclaim the unused buffers of the queue. iwl_tx_cmd_complete in turn call the iwl_hcmd_queue_reclaim which will unmap the dma mapping to tx_cmd and frees the memory. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945 : fix rate scalingAbhijeet Kolekar2009-03-161-39/+88
| | | | | | | | | | | | | | | | | | Patch fixes the bug 1900 at http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1900 Issues: Throughput and success ratio calculations were not done properly. Number of retries were exceeding 16. Fix: Patch fixes above issues by doing window calculations inline with iwlwifi Patch adds sanity check to limit number of retries to 16. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: use iwl_led structureAbhijeet Kolekar2009-03-168-71/+43
| | | | | | | | | | 3945 can now use iwl_led's structure from iwlwifi. Patch also removes CONFIG_IWL3945_LEDS flag from Kconfig as 3945's led support will now be enabled if user selects CONFIG_IWLWIFI_LEDS. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: fix sparse errorAbhijeet Kolekar2009-03-161-1/+1
| | | | | | | | | | error is: iwl3945-base.c:545:5: warning: symbol 'iwl3945_set_dynamic_key' was not declared. Should it be static? Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: verify the antenna selection when receive fixed rate debugfsWey-Yi Guy2009-03-161-6/+13
| | | | | | | | | | | | When iwlwifi driver receive fixed rate debugfs command, validate the antenna selection, if the selection is invalid, report the valid antenna choice and do not set the rate scale table to fixed rate. Otherwise, set the entire rate scale table to the fixed rate request by the user. this validation can prevent sysassert happen in uCode Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: check IEEE80211_TX_STAT_AMPDU for agg pktWey-Yi Guy2009-03-161-3/+3
| | | | | | | | | | | | | | | | | when perform rate scaling, in tx status function, checking for IEEE80211_TX_STAT_AMPDU flag instead of IEEE_TX_CTL_AMPDU flag to perform AMPDU rate scaling operation. IEEE80211_TX_CTL_AMPDU was set by mac80211 for aggregation pkt. But when iwlwifi receive the tx status reply, it reset the flag to following info->flags = IEEE80211_TX_STAT_ACK; info->flags |= IEEE80211_TX_STAT_AMPDU; it causes the rate-scaling to not work for aggregation pkt if we checking for IEEE80211_TX_CTL_AMPDU flag. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: HT performance improvement changesWey-Yi Guy2009-03-162-6/+7
| | | | | | | | | | | | During rate scaling, checking for 0 retry count before decrement the count by 1, this can avoid the retry count to become 255 (0xff), which will cause the rate to drop faster than what we expect during good condition (receive 0 retry packet). also change the algorithm to make the rate not drop faster than what we like. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: remove un-necessary rs_tl_turn_on_agg() after agg enabledWey-Yi Guy2009-03-161-2/+10
| | | | | | | | | After the MLME handshaking complete and tx aggregation started for the tid. Do not send unnecessary turn on aggregation request to mac80211. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: add rf information in rate_scale debugfs commandWey-Yi Guy2009-03-161-0/+11
| | | | | | | | | | Adding more Radio information when displaying rate_scale_table. This can help to understand how many antenna and the current RF condition such as SISO, MIMO2, MIMO3. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: add valid tx antenna information in rate_scale_table debugfsWey-Yi Guy2009-03-161-0/+6
| | | | | | | | | | | when display rate_scale_table debugfs information, also display valid tx antenna information, this will help user to select correct antenna when issue fixed rate debugfs command Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Acked-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: correct device name for 1000 seriesJay Sternberg2009-03-166-17/+17
| | | | | | | | device name was changed from 100 to 1000 Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: add test for new associationAbhijeet Kolekar2009-03-161-4/+4
| | | | | | | | Add check for new association to ease reading. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵David S. Miller2009-03-102-3/+3
|\ | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x_main.c drivers/net/wireless/iwlwifi/iwl3945-base.c drivers/net/wireless/rt2x00/rt73usb.c
| * iwlwifi: fix error flow in iwl*_pci_probeReinette Chatre2009-03-052-12/+11
| | | | | | | | | | | | | | | | | | Both the agn and 3945 drivers has some problems with dealing with errors in their probe functions. Ensure that a goto will undo only things that was done before the goto was called. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * Fix iwlan DMA mapping directionFenghua Yu2009-02-251-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When iwlan runs on IOMMU, IOMMU generates a lot of PTE write faults because PTE write bit is not set on some of PTE's. This is because iwlan driver calls DMA mapping with PCI_DMA_TODEVICE which is read only in mapping PTE. But iwlan device actually writes to the mapped page to update its contents. This issue is not exposed in swiotlb. But VT-d hardware can capture this fault and stop the fault transaction. The following patch fixes the issue. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Bhavesh Davda <bhavesh@vmware.com> Tested-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * iwlwifi: fix suspend/resume and its usage of pci saved stateReinette Chatre2009-02-112-4/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here we do two things: First, revert "iwlwifi: save PCI state before suspend, restore after resume". That misguided patch led to being unable to use iwlwifi devices after resume. Next, indicate to PCI driver that the saved PCI state is valid during suspend. We restore PCI state and enable the device when network interface is created, similarly PCI state is saved and the device is disabled when network interface is removed. Thus, when .suspend is called the PCI state is saved and device is disabled. This is the case even if an interface is never created as PCI state is saved and device disabled during .probe. PCI driver assumes PCI state is saved in .suspend. Saving the state at this time will save state of disabled device and thus cause problems during resume (resuming a disabled device). We thus indicate directly to PCI driver that current PCI saved state is valid. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Alex Riesen <fork0@users.sf.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | iwlwifi: reduce stack sizeFrank Seidel2009-03-052-6/+28
| | | | | | | | | | | | | | | | | | Reduce stack memory footprint of iwlwifi. (From >1000 bytes for each *_table_read on i386 down to 32) Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | iwl3945 : use iwl_activate_qosAbhijeet Kolekar2009-03-054-77/+37
| | | | | | | | | | | | | | | | | | | | | | 3945 can use iwl_activate_qos instead of iwl3945_activate_qos. Patch does two things 1) Patch adds iwl_activate_qos in core library. 2) 3945 makes use of iwl_activate_qos. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | iwl3945: add iwl3945_setup_macAbhijeet Kolekar2009-03-051-29/+45
| | | | | | | | | | | | | | | | | | | | Patch does following, 1) mac80211's shared data is now initialized in iwl3945_setup_mac. 2) Set the rfkill to right state after initialization Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | iwlwifi: fix *pci_probe error flowReinette Chatre2009-03-052-11/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | for iwlagn: - Have to free eeprom of version check fails - otherwise we end up with memory leak. - Include removal of workqueue (created in _setup_deferred_work) in error handling. for iwl3945: - Fix a few places to jump to correct error handling. - Reorganize error handling to match with code flow. - Include iwl_free_channel_map as part of error handling. - Include releasing eeprom as part of error handling. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | iwl3945: unify set key flow with iwlwifiAbhijeet Kolekar2009-03-053-55/+121
| | | | | | | | | | | | | | | | | | unify the set key flow with iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | iwl3945: synchronize timestamp with uCodeAbhijeet Kolekar2009-03-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | In IBSS, TSF maintains local clock counters at each station. Network Synchronization follows a completely distributed scheme where beacon frames are generated. Each station maintain its own TSF timestamp, extracted from beacon timestamps they recieved. Following patch synchronize this beacon timestamp with uCode. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | iwlwifi: update 5150 API version to support new firmwareJay Sternberg2009-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | update API to support new numbering that is used for other newer devices. 5150 ucode has not been released yet, so the first released API will be v2. For those who do have a v1 API the driver does have backward compatibility support new value of REPLY_TX_POWER_DBM_CMD Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | iwl3945: re-add iwl_poll_direct_bit return value checkJason Andryuk2009-02-271-1/+1
| | | | | | | | | | | | | | | | Re-add the iwl_poll_direct_bit return value assignment dropped in "iwl3945: add apm ops". Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-08 16:21:27 +0100