summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/microchip/wilc1000/wlan.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* wifi: wilc1000: Add WILC3000 supportAjay Singh2024-10-171-33/+187
| | | | | | | | | | | | | | | | | Add support for the WILC3000 chip. The chip is similar to WILC1000, except that the register layout is slightly different and it does not support WPA3/SAE. Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com> Tested-by: Alexis Lothoré <alexis.lothore@bootlin.com> Tested-on: WILC1000SD 07 SDIO WILC_WIFI_FW_REL_16_1_2 Tested-on: WILC1000SD 07 SPI WILC_WIFI_FW_REL_16_1_2 Tested-on: WILC3000 A SDIO WILC_WIFI_FW_REL_16_1_1 Tested-on: WILC3000 A SPI WILC_WIFI_FW_REL_16_1_1 Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241004114551.40236-7-marex@denx.de
* wifi: wilc1000: Fill in missing error handlingMarek Vasut2024-10-171-45/+109
| | | | | | | | | | | | Add error handling to chip_wakeup() and propagate the errors throughout the entire driver. Add error handling to acquire_bus()/release_bus() and host_sleep_notify()/host_wakeup_notify() functions as a result as well. Fill the error handling to all call sites. Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241004114551.40236-4-marex@denx.de
* wifi: wilc1000: Fold chip_allow_sleep()/chip_wakeup() into wlan.cMarek Vasut2024-10-171-24/+23
| | | | | | | | | | | | | | | | | Neither chip_allow_sleep()/chip_wakeup() is used outside of wlan.c . Make both functions static and remove both the exported symbol and entries from wlan.h . Make chip_allow_sleep() return error code in preparation for the follow up patches. Move acquire_bus() and release_bus() to avoid forward declaration of chip_allow_sleep()/chip_wakeup(). Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241004114551.40236-3-marex@denx.de
* wifi: wilc1000: Clean up usage of wilc_get_chipid()Marek Vasut2024-10-171-31/+44
| | | | | | | | | | | | | | | Reduce the use of wilc_get_chipid(), use cached chip ID wherever possible. Remove duplicated partial chip ID read implementations from the driver. Update wilc_get_chipid() to always read the chip ID out of the hardware and update the cached chip ID, and make it return a proper return value instead of a chipid. Call wilc_get_chipid() early to make the cached chip ID available to various sites using is_wilc1000() to access the cached chip ID. Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241004114551.40236-2-marex@denx.de
* wifi: wilc1000: let host->chip suspend/resume notifications manage chip ↵Alexis Lothoré2024-06-181-4/+4
| | | | | | | | | | | | | | | wake/sleep host_wakeup_notify and host_sleep_notify are surrounded by chip_wakeup and chip_allow_sleep calls, which theorically need to be protected with the hif_cs lock. This lock protection is currently missing. Instead of adding the lock where those two functions are called, move those in host->chip suspend notifications to benefit from the lock already used there (in bus_acquire/bus_release) Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240613-wilc_suspend-v1-2-c2f766d0988c@bootlin.com
* Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski2024-06-111-0/+49
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * wifi: wilc1000: add function to read mac address from eFuseAlexis Lothoré2024-05-171-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | wilc driver currently reads and sets mac address by firmware calls. It means that we can not access mac address if no interface has been brought up (so firmware is up and running). Another way to get mac address is to read it directly from eFUSE. Add a function helper to read the mac address written in eFuse, without firmware assistance Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240514-mac_addr_at_probe-v2-4-afef09f1cd10@bootlin.com
* | Revert "wifi: wilc1000: convert list management to RCU"Alexis Lothoré2024-06-011-2/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit f236464f1db7bea80075e6e31ac70dc6eb80547f Commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU") replaced SRCU with RCU, aiming to simplify RCU usage in the driver. No documentation or commit history hinted about why SRCU has been preferred in original design, so it has been assumed to be safe to do this conversion. Unfortunately, some static analyzers raised warnings, confirmed by runtime checker, not long after the merge. At least three different issues arose when switching to RCU: - wilc_wlan_txq_filter_dup_tcp_ack is executed in a RCU read critical section yet calls wait_for_completion_timeout - wilc_wfi_init_mon_interface calls kmalloc and register_netdevice while manipulating a vif retrieved from vif list - set_channel sends command to chip (and so, also waits for a completion) while holding a vif retrieved from vif list (so, in RCU read critical section) Some of those issues are not trivial to fix and would need bigger driver rework. Fix those issues by reverting the SRCU to RCU conversion commit Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-wireless/3b46ec7c-baee-49fd-b760-3bc12fb12eaf@moroto.mountain/ Fixes: f236464f1db7 ("wifi: wilc1000: convert list management to RCU") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-1-bce096e0798c@bootlin.com
* wifi: wilc1000: convert list management to RCUAlexis Lothoré2024-04-161-3/+2
| | | | | | | | | | | | | wilc1000 driver currently uses SRCU API to manage vif list. There is no real reason to use SRCU API here, and it makes things slightly more complicated (we need to handle a SRCU index as well as a srcu_struct) than classical RCU. Switch SRCU APIs to RCU APIs. Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240410-wilc_srcu_to_rcu-v1-2-a9ff5b10feaa@bootlin.com
* wifi: wilc1000: use SRCU instead of RCU for vif list traversalAlexis Lothoré2024-02-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling CONFIG_PROVE_RCU_LIST raises many warnings in wilc driver, even on some places already protected by a read critical section. An example of such case is in wilc_get_available_idx: ============================= WARNING: suspicious RCU usage 6.8.0-rc1+ #32 Not tainted ----------------------------- drivers/net/wireless/microchip/wilc1000/netdev.c:944 RCU-list traversed in non-reader section!! [...] stack backtrace: CPU: 0 PID: 26 Comm: kworker/0:3 Not tainted 6.8.0-rc1+ #32 Hardware name: Atmel SAMA5 Workqueue: events_freezable mmc_rescan unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x58 dump_stack_lvl from wilc_netdev_ifc_init+0x788/0x8ec wilc_netdev_ifc_init from wilc_cfg80211_init+0x690/0x910 wilc_cfg80211_init from wilc_sdio_probe+0x168/0x490 wilc_sdio_probe from sdio_bus_probe+0x230/0x3f4 sdio_bus_probe from really_probe+0x270/0xdf4 really_probe from __driver_probe_device+0x1dc/0x580 __driver_probe_device from driver_probe_device+0x60/0x140 driver_probe_device from __device_attach_driver+0x268/0x364 __device_attach_driver from bus_for_each_drv+0x15c/0x1cc bus_for_each_drv from __device_attach+0x1ec/0x3e8 __device_attach from bus_probe_device+0x190/0x1c0 bus_probe_device from device_add+0x10dc/0x18e4 device_add from sdio_add_func+0x1c0/0x2c0 sdio_add_func from mmc_attach_sdio+0xa08/0xe1c mmc_attach_sdio from mmc_rescan+0xa00/0xfe0 mmc_rescan from process_one_work+0x8d4/0x169c process_one_work from worker_thread+0x8cc/0x1340 worker_thread from kthread+0x448/0x510 kthread from ret_from_fork+0x14/0x28 This warning is due to the section being protected by a srcu critical read section, but the list traversal being done with classic RCU API. Fix the warning by using corresponding SRCU read lock/unlock APIs. While doing so, since we always manipulate the same list (managed through a pointer embedded in struct_wilc), add a macro to reduce the corresponding boilerplate in each call site. Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240215-wilc_fix_rcu_usage-v1-2-f610e46c6f82@bootlin.com
* wifi: wilc1000: validate chip id during bus probeDavid Mosberger-Tang2024-02-151-5/+0
| | | | | | | | | | | | Previously, the driver created a net device (typically wlan0) as soon as the module was loaded. This commit changes the driver to follow normal Linux convention of creating the net device only when bus probing detects a supported chip. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Tested-By: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240212202057.3468714-1-davidm@egauge.net
* wifi: wilc1000: fix incorrect power down sequenceAjay Singh2024-01-181-14/+19
| | | | | | | | | | | | | | | | Use the correct register configuration when the WILC chip is down so the successive interface up operation is successful. The modified registers values during chip down helps to avoid the "FW not responding" debug message which sometimes occurs because of temporary bus communication failure during the next start. Also, make sure on first communication with the chip that it is indeed woken up. Reported-by: Michael Walle <mwalle@kernel.org> Closes: https://lore.kernel.org/linux-wireless/20221026085415.6jgwrhq4sunqaypm@0002.3ffe.de/ Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240115-wilc_1000_fixes-v1-4-54d29463a738@bootlin.com
* wifi: wilc1000: use vmm_table as array in wilc structAjay Singh2023-10-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | Enabling KASAN and running some iperf tests raises some memory issues with vmm_table: BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4 Write of size 4 at addr c3a61540 by task wlan0-tx/95 KASAN detects that we are writing data beyond range allocated to vmm_table. There is indeed a mismatch between the size passed to allocator in wilc_wlan_init, and the range of possible indexes used later: allocation size is missing a multiplication by sizeof(u32) Fixes: 40b717bfcefa ("wifi: wilc1000: fix DMA on stack objects") Cc: stable@vger.kernel.org Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231017-wilc1000_tx_oops-v3-1-b2155f1f7bee@bootlin.com
* wifi: wilc1000: fix DMA on stack objectsAjay.Kathat@microchip.com2022-08-301-2/+13
| | | | | | | | | | | | | | | Sometimes 'wilc_sdio_cmd53' is called with addresses pointing to an object on the stack. Use dynamically allocated memory for cmd53 instead of stack address which is not DMA'able. Fixes: 5625f965d764 ("wilc1000: move wilc driver out of staging") Reported-by: Michael Walle <mwalle@kernel.org> Suggested-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Tested-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220809075749.62752-1-ajay.kathat@microchip.com
* wifi: wilc1000: add 'isinit' flag for SDIO bus similar to SPIAjay Singh2022-07-271-3/+6
| | | | | | | | | | Similar to SPI priv data, add 'isinit' variable in SDIO priv. Make use of the state to invoke hif_init() once, and acquire the lock before accessing hif function. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-7-ajay.kathat@microchip.com
* wifi: wilc1000: add WPA3 SAE supportAjay Singh2022-05-301-1/+2
| | | | | | | | | | | Enable SAE authentication for AP and STA mode. In STA mode, allow the driver to pass the auth frames which are received from firmware to userspace application(hostapd) so that SAE authentication is offloaded to userspace. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-3-ajay.kathat@microchip.com
* wilc1000: add valid vmm_entry check before fetching from TX queueAjay Singh2022-05-111-3/+4
| | | | | | | | | | | | | | | 'vmm_table' array contains the size of data buffer length including host header length. In 'vmm_table' array, the Zero value means the end of vmm_entries that needs to transfer to firmware which is calculated based on VMM free size in firmware. Use 'vmm_table' valid entry check before fetching the entry from TX queue to only copy valid number of entries to avoid possible NULL pointer exception observed sometimes during large file transfers. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-5-ajay.kathat@microchip.com
* wilc1000: Add reset/enable GPIO support to SPI driverDavid Mosberger-Tang2021-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | For the SDIO driver, the RESET/ENABLE pins of WILC1000 are controlled through the SDIO power sequence driver. This commit adds analogous support for the SPI driver. Specifically, during initialization, the chip will be ENABLEd and taken out of RESET and during deinitialization, the chip will be placed back into RESET and disabled (both to reduce power consumption and to ensure the WiFi radio is off). Both RESET and ENABLE GPIOs are optional. However, if the ENABLE GPIO is specified, then the RESET GPIO should normally also be specified as otherwise there is no way to ensure proper timing of the ENABLE/RESET sequence. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211221212531.4011609-2-davidm@egauge.net
* wilc1000: Convert static "chipid" variable to device-local variableDavid Mosberger-Tang2021-12-221-14/+13
| | | | | | | | | Move "chipid" variable into the per-driver structure so the code doesn't break if more than one wilc1000 module is present. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211221210538.4011227-1-davidm@egauge.net
* wilc1000: Improve WILC TX performance when power_save is offDavid Mosberger-Tang2021-12-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | The wakeup and sleep commands need to be sent to the WILC chip only when it is in power save mode (PSM, as controlled by "iw dev wlan0 set power_save on/off"). The commands are relatively costly, so it pays to skip them when possible. iperf3 without this patch (no significant different with PSM on/off): TX 0.00-120.01 sec 140 MBytes 9.82 Mbits/sec RX 0.00-120.69 sec 283 MBytes 19.6 Mbits/sec with this patch applied: PSM off (TX is 46% improved, RX slightly improved; may not be significant): TX 0.00-120.00 sec 206 MBytes 14.4 Mbits/sec RX 0.00-120.48 sec 322 MBytes 22.4 Mbits/sec PSM on (no significant change): TX 0.00-120.00 sec 140 MBytes 9.78 Mbits/sec RX 0.00-120.08 sec 257 MBytes 18.0 Mbits/sec Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211210203016.3680425-2-davidm@egauge.net
* wilc1000: Fix spurious "FW not responding" errorDavid Mosberger-Tang2021-12-141-1/+2
| | | | | | | | | | | | | When deinitializing the driver, one or more "FW not responding" error appears on the console. This appears to be due to wilc_wlan_stop() disabling host/WILC1000 communication, but then right afterwards, it tries to release the bus with chip-sleep enabled. The problem is enabling the chip-sleep cannot success once host/WILC1000 communication is disabled. Fix by only releasing the bus. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211208062747.3405221-1-davidm@egauge.net
* wilc1000: remove '-Wunused-but-set-variable' warning in chip_wakeup()Ajay Singh2021-11-261-5/+0
| | | | | | | | | | | | | | | | | Remove unused variables to avoid the below warnings: drivers/net/wireless/microchip/wilc1000/wlan.c: In function 'chip_wakeup': >> drivers/net/wireless/microchip/wilc1000/wlan.c:620:34: warning: variable 'to_host_from_fw_bit' set but not used [-Wunused-but-set-variable] 620 | u32 to_host_from_fw_reg, to_host_from_fw_bit; | ^~~~~~~~~~~~~~~~~~~ >> drivers/net/wireless/microchip/wilc1000/wlan.c:620:13: warning: variable 'to_host_from_fw_reg' set but not used [-Wunused-but-set-variable] 620 | u32 to_host_from_fw_reg, to_host_from_fw_bit; | ^~~~~~~~~~~~~~~~~~~ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211115102809.1408267-1-ajay.kathat@microchip.com
* wilc1000: add 'initialized' flag check before adding an element to TX queueAjay Singh2021-09-211-0/+9
| | | | | | | | | Add 'initialized' variable check before adding net/mgmt packet to TX queue as safety check before passing the commands to the firmware. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-10-ajay.kathat@microchip.com
* wilc1000: invoke chip reset register before firmware downloadAjay Singh2021-09-211-3/+19
| | | | | | | | | | Add the chip reset command to initialize the WILC chip before downloading the firmware. Also, put the chip in wake-up mode so it is ready to receive the firmware binary from the host. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-9-ajay.kathat@microchip.com
* wilc1000: handle read failure issue for clockless registersAjay Singh2021-09-211-0/+5
| | | | | | | | | | For SPI bus, the register read fails after read/write to the clockless register during chip wakeup sequence. Add workaround to send CMD_RESET command during chip wake-up sequence to overcome the issue. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-7-ajay.kathat@microchip.com
* wilc1000: configure registers to handle chip wakeup sequenceAjay Singh2021-09-211-47/+51
| | | | | | | | | | | | | | | | Use the correct sequence to configure clockless registers for chip wake-up. The following sequence is expected from WILC chip for wakeup: - set wakeup bit in wakeup_reg register - after setting the wakeup bit, read back the clock status bit for wakeup complete. For SDIO/SPI modules, the wakeup sequence is the same except uses different register values so refactored the code to use common function for both SDIO/SPI bus. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210916164902.74629-5-ajay.kathat@microchip.com
* wilc1000: remove redundant codewengjianfeng2021-08-211-22/+16
| | | | | | | | Some of the code is redundant, so goto statements are used to remove them Signed-off-by: wengjianfeng <wengjianfeng@yulong.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210705023731.31496-1-samirweng1979@163.com
* wilc1000: fix a loop timeout conditionDan Carpenter2021-04-171-1/+1
| | | | | | | | | | | | | | | If the loop fails, the "while(trials--) {" loop will exit with "trials" set to -1. The test for that expects it to end with "trials" set to 0 so the warning message will not be printed. Fix this by changing from a post-op to a pre-op. This does mean that we only make 99 attempts instead of 100 but that's okay. Fixes: f135a1571a05 ("wilc1000: Support chip sleep over SPI") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YFS5gx/gi70zlIaO@mwanda
* wilc1000: Support chip sleep over SPIDavid Mosberger-Tang2021-03-151-4/+52
| | | | | | | | | | | chip_allow_sleep() only supported wakeup via SDIO, which made the driver unusable over SPI. This code is a straight forward port from the driver in the linux-at91 repository. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210224033317.1507603-1-davidm@egauge.net
* wilc1000: Fix use of void pointer as a wrong struct typeVsevolod Kozlov2021-02-111-7/+8
| | | | | | | | | | | | | | | | ac_classify() expects a struct sk_buff* as its second argument, which is a member of struct tx_complete_data. priv happens to be a pointer to struct tx_complete_data, so passing it directly to ac_classify() leads to wrong behaviour and occasional panics. Since there is only one caller of wilc_wlan_txq_add_net_pkt and it already knows the type behind this pointer, and the structure is already in the header file, change the function signature to use the real type instead of void* in order to prevent confusion. Signed-off-by: Vsevolod Kozlov <zaba@mm.st> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YCQomJ1mO5BLxYOT@Vsevolods-Mini.lan
* wilc1000: remove redundant assignment to pointer vifColin Ian King2020-12-071-1/+0
| | | | | | | | | | | The assignment to pointer vif is redundant as the assigned value is never read, hence it can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201203174316.1071446-1-colin.king@canonical.com
* wilc1000: added queue support for WMMAjay Singh2020-12-021-58/+257
| | | | | | | | | | | | | Added multiple queues[BK,BE,VI,VO] to handle different priority data packets. Before adding a packet to the queue, checked its priority from the header, and then add to the suitable queue. The limit for each queue is maintained separately. Also while passing the packets to the firmware via VMM take care to select data packets based on priority and available space. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201125114059.10006-6-ajay.kathat@microchip.com
* wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt()Ajay Singh2020-12-021-1/+3
| | | | | | | | Added complete() call for failure case in wilc_wlan_txq_add_cfg_pkt(). Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201125114059.10006-5-ajay.kathat@microchip.com
* wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure pathAjay Singh2020-12-021-2/+6
| | | | | | | | | Before returing from wilc_wlan_txq_add_mgmt_pkt() invoke tx_complete_fn() callback to free up allocated memory for failure case. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201125114059.10006-4-ajay.kathat@microchip.com
* wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure pathAjay Singh2020-12-021-2/+6
| | | | | | | | | Before returing from wilc_wlan_txq_add_net_pkt() invoke tx_complete_fn() callback to free up allocated memory for failure cases. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201125114059.10006-3-ajay.kathat@microchip.com
* wilc1000: move wilc driver out of stagingAjay Singh2020-06-261-0/+1238
WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface. WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2. [1]. https://lore.kernel.org/linux-wireless/1537957525-11467-1-git-send-email-ajay.kathat@microchip.com/ [2]. https://lore.kernel.org/linux-wireless/1562896697-8002-1-git-send-email-ajay.kathat@microchip.com/ Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 15:10:41 +0100