summaryrefslogtreecommitdiffstats
path: root/drivers/net/xen-netback (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net/xen-netback: prevent UAF in xenvif_flush_hash()Jeongjun Park2024-08-291-3/+2
| | | | | | | | | | | | | During the list_for_each_entry_rcu iteration call of xenvif_flush_hash, kfree_rcu does not exist inside the rcu read critical section, so if kfree_rcu is called when the rcu grace period ends during the iteration, UAF occurs when accessing head->next after the entry becomes free. Therefore, to solve this, you need to change it to list_for_each_entry_safe. Signed-off-by: Jeongjun Park <aha310510@gmail.com> Link: https://patch.msgid.link/20240822181109.2577354-1-aha310510@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet2024-05-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge branch 'for-uring-ubufops' into HEADJakub Kicinski2024-04-233-7/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pavel Begunkov says: ==================== implement io_uring notification (ubuf_info) stacking (net part) To have per request buffer notifications each zerocopy io_uring send request allocates a new ubuf_info. However, as an skb can carry only one uarg, it may force the stack to create many small skbs hurting performance in many ways. The patchset implements notification, i.e. an io_uring's ubuf_info extension, stacking. It attempts to link ubuf_info's into a list, allowing to have multiple of them per skb. liburing/examples/send-zerocopy shows up 6 times performance improvement for TCP with 4KB bytes per send, and levels it with MSG_ZEROCOPY. Without the patchset it requires much larger sends to utilise all potential. bytes | before | after (Kqps) 1200 | 195 | 1023 4000 | 193 | 1386 8000 | 154 | 1058 ==================== Link: https://lore.kernel.org/all/cover.1713369317.git.asml.silence@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: extend ubuf_info callback to ops structurePavel Begunkov2024-04-233-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We'll need to associate additional callbacks with ubuf_info, introduce a structure holding ubuf_info callbacks. Apart from a more smarter io_uring notification management introduced in next patches, it can be used to generalise msg_zerocopy_put_abort() and also store ->sg_from_iter, which is currently passed in struct msghdr. Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/all/a62015541de49c0e2a8a0377a1d5d0a5aeb07016.1713369317.git.asml.silence@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: move skb ref helpers to new headerMina Almasry2024-04-121-0/+1
|/ | | | | | | | | | | | | | | | Add a new header, linux/skbuff_ref.h, which contains all the skb_*_ref() helpers. Many of the consumers of skbuff.h do not actually use any of the skb ref helpers, and we can speed up compilation a bit by minimizing this header file. Additionally in the later patch in the series we add page_pool support to skb_frag_ref(), which requires some page_pool dependencies. We can now add these dependencies to skbuff_ref.h instead of a very ubiquitous skbuff.h Signed-off-by: Mina Almasry <almasrymina@google.com> Link: https://lore.kernel.org/r/20240410190505.1225848-2-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: fill in MODULE_DESCRIPTION()s for xen-netbackBreno Leitao2024-02-151-0/+1
| | | | | | | | | | W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Xen backend network module. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20240214152741.670178-2-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* xen-netback: properly sync TX responsesJan Beulich2024-02-011-44/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Invoking the make_tx_response() / push_tx_responses() pair with no lock held would be acceptable only if all such invocations happened from the same context (NAPI instance or dealloc thread). Since this isn't the case, and since the interface "spec" also doesn't demand that multicast operations may only be performed with no in-flight transmits, MCAST_{ADD,DEL} processing also needs to acquire the response lock around the invocations. To prevent similar mistakes going forward, "downgrade" the present functions to private helpers of just the two remaining ones using them directly, with no forward declarations anymore. This involves renaming what so far was make_tx_response(), for the new function of that name to serve the new (wrapper) purpose. While there, - constify the txp parameters, - correct xenvif_idx_release()'s status parameter's type, - rename {,_}make_tx_response()'s status parameters for consistency with xenvif_idx_release()'s. Fixes: 210c34dcd8d9 ("xen-netback: add support for multicast control") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/980c6c3d-e10e-4459-8565-e8fbde122f00@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* xen-netback: don't produce zero-size SKB fragsJan Beulich2024-01-081-6/+38
| | | | | | | | | | | | | | | | | | | | | While frontends may submit zero-size requests (wasting a precious slot), core networking code as of at least 3ece782693c4b ("sock: skb_copy_ubufs support for compound pages") can't deal with SKBs when they have all zero-size fragments. Respond to empty requests right when populating fragments; all further processing is fragment based and hence won't encounter these empty requests anymore. In a way this should have been that way from the beginning: When no data is to be transferred for a particular request, there's not even a point in validating the respective grant ref. That's no different from e.g. passing NULL into memcpy() when at the same time the size is 0. This is XSA-448 / CVE-2023-46838. Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org>
* Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of ↵Linus Torvalds2023-11-031-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "As usual, lots of singleton and doubleton patches all over the tree and there's little I can say which isn't in the individual changelogs. The lengthier patch series are - 'kdump: use generic functions to simplify crashkernel reservation in arch', from Baoquan He. This is mainly cleanups and consolidation of the 'crashkernel=' kernel parameter handling - After much discussion, David Laight's 'minmax: Relax type checks in min() and max()' is here. Hopefully reduces some typecasting and the use of min_t() and max_t() - A group of patches from Oleg Nesterov which clean up and slightly fix our handling of reads from /proc/PID/task/... and which remove task_struct.thread_group" * tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits) scripts/gdb/vmalloc: disable on no-MMU scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n .mailmap: add address mapping for Tomeu Vizoso mailmap: update email address for Claudiu Beznea tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions .mailmap: map Benjamin Poirier's address scripts/gdb: add lx_current support for riscv ocfs2: fix a spelling typo in comment proc: test ProtectionKey in proc-empty-vm test proc: fix proc-empty-vm test with vsyscall fs/proc/base.c: remove unneeded semicolon do_io_accounting: use sig->stats_lock do_io_accounting: use __for_each_thread() ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error() ocfs2: fix a typo in a comment scripts/show_delta: add __main__ judgement before main code treewide: mark stuff as __ro_after_init fs: ocfs2: check status values proc: test /proc/${pid}/statm compiler.h: move __is_constexpr() to compiler.h ...
| * kthread: add kthread_stop_putAndreas Gruenbacher2023-10-041-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a kthread_stop_put() helper that stops a thread and puts its task struct. Use it to replace the various instances of kthread_stop() followed by put_task_struct(). Remove the kthread_stop_put() macro in usbip that is similar but doesn't return the result of kthread_stop(). [agruenba@redhat.com: fix kerneldoc comment] Link: https://lkml.kernel.org/r/20230911111730.2565537-1-agruenba@redhat.com [akpm@linux-foundation.org: document kthread_stop_put()'s argument] Link: https://lkml.kernel.org/r/20230907234048.2499820-1-agruenba@redhat.com Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | xen-netback: add software timestamp capabilitiesLuca Fancellu2023-10-131-1/+4
| | | | | | | | | | | | | | | | | | Add software timestamp capabilities to the xen-netback driver by advertising it on the struct ethtool_ops and calling skb_tx_timestamp before passing the buffer to the queue. Signed-off-by: Luca Fancellu <luca.fancellu@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xen-netback: use default TX queue size for vifsRoger Pau Monne2023-10-081-4/+0
|/ | | | | | | | | | | | | | | | | | Do not set netback interfaces (vifs) default TX queue size to the ring size. The TX queue size is not related to the ring size, and using the ring size (32) as the queue size can lead to packet drops. Note the TX side of the vif interface in the netback domain is the one receiving packets to be injected to the guest. Do not explicitly set the TX queue length to any value when creating the interface, and instead use the system default. Note that the queue length can also be adjusted at runtime. Fixes: f942dc2552b8 ('xen network backend driver') Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen/netback: Fix buffer overrun triggered by unusual packetRoss Lagerwall2023-08-031-5/+10
| | | | | | | | | | | | | | | | | | It is possible that a guest can send a packet that contains a head + 18 slots and yet has a len <= XEN_NETBACK_TX_COPY_LEN. This causes nr_slots to underflow in xenvif_get_requests() which then causes the subsequent loop's termination condition to be wrong, causing a buffer overrun of queue->tx_map_ops. Rework the code to account for the extra frag_overflow slots. This is CVE-2023-34319 / XSA-432. Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
* Merge tag 'asm-generic-6.5' of ↵Linus Torvalds2023-07-061-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "These are cleanups for architecture specific header files: - the comments in include/linux/syscalls.h have gone out of sync and are really pointless, so these get removed - The asm/bitsperlong.h header no longer needs to be architecture specific on modern compilers, so use a generic version for newer architectures that use new enough userspace compilers - A cleanup for virt_to_pfn/virt_to_bus to have proper type checking, forcing the use of pointers" * tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: syscalls: Remove file path comments from headers tools arch: Remove uapi bitsperlong.h of hexagon and microblaze asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch m68k/mm: Make pfn accessors static inlines arm64: memory: Make virt_to_pfn() a static inline ARM: mm: Make virt_to_pfn() a static inline asm-generic/page.h: Make pfn accessors static inlines xen/netback: Pass (void *) to virt_to_page() netfs: Pass a pointer to virt_to_page() cifs: Pass a pointer to virt_to_page() in cifsglob cifs: Pass a pointer to virt_to_page() riscv: mm: init: Pass a pointer to virt_to_page() ARC: init: Pass a pointer to virt_to_pfn() in init m68k: Pass a pointer to virt_to_pfn() virt_to_page() fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
| * xen/netback: Pass (void *) to virt_to_page()Linus Walleij2023-05-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virt_to_page() takes a virtual address as argument but the driver passes an unsigned long, which works because the target platform(s) uses polymorphic macros to calculate the page. Since many architectures implement virt_to_pfn() as a macro, this function becomes polymorphic and accepts both a (unsigned long) and a (void *). Fix this up by an explicit (void *) cast. Cc: Wei Liu <wei.liu@kernel.org> Cc: Paul Durrant <paul@xen.org> Cc: xen-devel@lists.xenproject.org Cc: netdev@vger.kernel.org Acked-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | net: introduce and use skb_frag_fill_page_desc()Yunsheng Lin2023-05-131-3/+1
|/ | | | | | | | | | | | | | | | | | | | | | Most users use __skb_frag_set_page()/skb_frag_off_set()/ skb_frag_size_set() to fill the page desc for a skb frag. Introduce skb_frag_fill_page_desc() to do that. net/bpf/test_run.c does not call skb_frag_off_set() to set the offset, "copy_from_user(page_address(page), ...)" and 'shinfo' being part of the 'data' kzalloced in bpf_test_init() suggest that it is assuming offset to be initialized as zero, so call skb_frag_fill_page_desc() with offset being zero for this case. Also, skb_frag_set_page() is not used anymore, so remove it. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen/netback: use same error messages for same errorsJuergen Gross2023-03-301-4/+2
| | | | | | | | | | | Issue the same error message in case an illegal page boundary crossing has been detected in both cases where this is tested. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20230329080259.14823-1-jgross@suse.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* xen/netback: remove not needed test in xenvif_tx_build_gops()Juergen Gross2023-03-281-4/+0
| | | | | | | | | | | | | | | | | The tests for the number of grant mapping or copy operations reaching the array size of the operations buffer at the end of the main loop in xenvif_tx_build_gops() isn't needed. The loop can handle at maximum MAX_PENDING_REQS transfer requests, as XEN_RING_NR_UNCONSUMED_REQUESTS() is taking unsent responses into consideration, too. Remove the tests. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* xen/netback: don't do grant copy across page boundaryJuergen Gross2023-03-282-3/+24
| | | | | | | | | | | | | | Fix xenvif_get_requests() not to do grant copy operations across local page boundaries. This requires to double the maximum number of copy operations per queue, as each copy could now be split into 2. Make sure that struct xenvif_tx_cb doesn't grow too large. Cc: stable@vger.kernel.org Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* Merge tag 'net-6.3-rc1' of ↵Linus Torvalds2023-02-271-5/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. The notable fixes here are the EEE fix which restores boot for many embedded platforms (real and QEMU); WiFi warning suppression and the ICE Kconfig cleanup. Current release - regressions: - phy: multiple fixes for EEE rework - wifi: wext: warn about usage only once - wifi: ath11k: allow system suspend to survive ath11k Current release - new code bugs: - mlx5: Fix memory leak in IPsec RoCE creation - ibmvnic: assign XPS map to correct queue index Previous releases - regressions: - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces - netfilter: ctnetlink: make event listener tracking global - nf_tables: allow to fetch set elements when table has an owner - mlx5: - fix skb leak while fifo resync and push - fix possible ptp queue fifo use-after-free Previous releases - always broken: - sched: fix action bind logic - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also uses a mutex - netfilter: conntrack: fix rmmod double-free race - netfilter: xt_length: use skb len to match in length_mt6, avoid issues with BIG TCP Misc: - ice: remove unnecessary CONFIG_ICE_GNSS - mlx5e: remove hairpin write debugfs files - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" * tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) tcp: tcp_check_req() can be called from process context net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard xen-netback: remove unused variables pending_idx and index net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy net: dsa: ocelot_ext: remove unnecessary phylink.h include net: mscc: ocelot: fix duplicate driver name error net: dsa: felix: fix internal MDIO controller resource length net: dsa: seville: ignore mscc-miim read errors from Lynx PCS net/sched: act_sample: fix action bind logic net/sched: act_mpls: fix action bind logic net/sched: act_pedit: fix action bind logic wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue qede: avoid uninitialized entries in coal_entry array nfc: fix memory leak of se_io context in nfc_genl_se_io ice: remove unnecessary CONFIG_ICE_GNSS net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy() ibmvnic: Assign XPS map to correct queue index docs: net: fix inaccuracies in msg_zerocopy.rst tools: net: add __pycache__ to gitignore ...
| * xen-netback: remove unused variables pending_idx and indexTom Rix2023-02-271-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | building with gcc and W=1 reports drivers/net/xen-netback/netback.c:886:21: error: variable ‘pending_idx’ set but not used [-Werror=unused-but-set-variable] 886 | u16 pending_idx; | ^~~~~~~~~~~ pending_idx is not used so remove it. Since index was only used to set pending_idx, remove index as well. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230226163429.2351600-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | driver core: make struct bus_type.uevent() take a const *Greg Kroah-Hartman2023-01-271-1/+1
|/ | | | | | | | | | | | The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'for-linus-6.2-rc4-tag' of ↵Linus Torvalds2023-01-131-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - two cleanup patches - a fix of a memory leak in the Xen pvfront driver - a fix of a locking issue in the Xen hypervisor console driver * tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: free active map buffer on pvcalls_front_free_map hvc/xen: lock console list traversal x86/xen: Remove the unused function p2m_index() xen: make remove callback of xen driver void returned
| * xen: make remove callback of xen driver void returnedDawei Li2022-12-151-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. This change is for xen bus based drivers. Acked-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dawei Li <set_pte_at@outlook.com> Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Juergen Gross <jgross@suse.com>
* | xen/netback: fix build warningJuergen Gross2022-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") introduced a (valid) build warning. There have even been reports of this problem breaking networking of Xen guests. Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com> Tested-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com>
* | xen/netback: don't call kfree_skb() with interrupts disabledJuergen Gross2022-12-063-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So remove kfree_skb() from the spin_lock_irqsave() section and use the already existing "drop" label in xenvif_start_xmit() for dropping the SKB. At the same time replace the dev_kfree_skb() call there with a call of dev_kfree_skb_any(), as xenvif_start_xmit() can be called with disabled interrupts. This is XSA-424 / CVE-2022-42328 / CVE-2022-42329. Fixes: be81992f9086 ("xen/netback: don't queue unlimited number of packages") Reported-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
* | xen/netback: Ensure protocol headers don't fall in the non-linear areaRoss Lagerwall2022-12-061-100/+123
|/ | | | | | | | | | | | | | | | | | | | | In some cases, the frontend may send a packet where the protocol headers are spread across multiple slots. This would result in netback creating an skb where the protocol headers spill over into the non-linear area. Some drivers and NICs don't handle this properly resulting in an interface reset or worse. This issue was introduced by the removal of an unconditional skb pull in the tx path to improve performance. Fix this without reintroducing the pull by setting up grant copy ops for as many slots as needed to reach the XEN_NETBACK_TX_COPY_LEN size. Adjust the rest of the code to handle multiple copy operations per skb. This is XSA-423 / CVE-2022-3643. Fixes: 7e5d7753956b ("xen-netback: remove unconditional __pskb_pull_tail() in guest Tx path") Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com>
* net: drop the weight argument from netif_napi_addJakub Kicinski2022-09-291-2/+1
| | | | | | | | | | | We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* xen/netback: use struct ubuf_info_msgzcPavel Begunkov2022-09-293-6/+7
| | | | | | | | struct ubuf_info will be changed, use ubuf_info_msgzc instead. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* xen-netback: use kstrdup instead of open-coding itMinghao Chi2022-09-231-2/+1
| | | | | | | | | use kstrdup instead of open-coding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Acked-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netback: only remove 'hotplug-status' when the vif is actually destroyedPaul Durrant2022-09-031-1/+1
| | | | | | | | | | | | | | | Removing 'hotplug-status' in backend_disconnected() means that it will be removed even in the case that the frontend unilaterally disconnects (which it is free to do at any time). The consequence of this is that, when the frontend attempts to re-connect, the backend gets stuck in 'InitWait' rather than moving straight to 'Connected' (which it can do because the hotplug script has already run). Instead, the 'hotplug-status' mode should be removed in netback_remove() i.e. when the vif really is going away. Fixes: 0f4558ae9187 ("Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"") Signed-off-by: Paul Durrant <pdurrant@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-07-151-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queueJuergen Gross2022-07-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xenvif_rx_next_skb() is expecting the rx queue not being empty, but in case the loop in xenvif_rx_action() is doing multiple iterations, the availability of another skb in the rx queue is not being checked. This can lead to crashes: [40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.537534] PGD 0 P4D 0 [40072.537644] Oops: 0000 [#1] SMP NOPTI [40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5 [40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021 [40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000 [40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246 [40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7 [40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8 [40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008 [40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708 [40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0 [40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000 [40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660 [40072.539211] Call Trace: [40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback] [40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback] Fix that by stopping the loop in case the rx queue becomes empty. Cc: stable@vger.kernel.org Fixes: 98f6d57ced73 ("xen-netback: process guest rx packets in batches") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20220713135322.19616-1-jgross@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: add skb_[inner_]tcp_all_headers helpersEric Dumazet2022-07-021-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xen/netback: do some code cleanupJuergen Gross2022-06-094-29/+5
|/ | | | | | | | | Remove some unused macros and functions, make local functions static. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20220608043726.9380-1-jgross@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* xen/netback: fix incorrect usage of RING_HAS_UNCONSUMED_REQUESTS()Juergen Gross2022-05-311-1/+1
| | | | | | | | | | | | | Commit 6fac592cca60 ("xen: update ring.h") missed to fix one use case of RING_HAS_UNCONSUMED_REQUESTS(). Reported-by: Jan Beulich <jbeulich@suse.com> Fixes: 6fac592cca60 ("xen: update ring.h") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20220530113459.20124-1-jgross@suse.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* eth: remove copies of the NAPI_POLL_WEIGHT defineJakub Kicinski2022-04-291-2/+1
| | | | | | | | | | | | | Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Drop the special defines in a bunch of drivers where the removal is relatively simple so grouping into one patch does not impact reviewability. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "xen-netback: Check for hotplug-status existence before watching"Marek Marczykowski-Górecki2022-02-241-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 2afeec08ab5c86ae21952151f726bfe184f6b23d. The reasoning in the commit was wrong - the code expected to setup the watch even if 'hotplug-status' didn't exist. In fact, it relied on the watch being fired the first time - to check if maybe 'hotplug-status' is already set to 'connected'. Not registering a watch for non-existing path (which is the case if hotplug script hasn't been executed yet), made the backend not waiting for the hotplug script to execute. This in turns, made the netfront think the interface is fully operational, while in fact it was not (the vif interface on xen-netback side might not be configured yet). This was a workaround for 'hotplug-status' erroneously being removed. But since that is reverted now, the workaround is not necessary either. More discussion at https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Michael Brown <mbrown@fensystems.co.uk> Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"Marek Marczykowski-Górecki2022-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 1f2565780e9b7218cf92c7630130e82dcc0fe9c2. The 'hotplug-status' node should not be removed as long as the vif device remains configured. Otherwise the xen-netback would wait for re-running the network script even if it was already called (in case of the frontent re-connecting). But also, it _should_ be removed when the vif device is destroyed (for example when unbinding the driver) - otherwise hotplug script would not configure the device whenever it re-appear. Moving removal of the 'hotplug-status' node was a workaround for nothing calling network script after xen-netback module is reloaded. But when vif interface is re-created (on xen-netback unbind/bind for example), the script should be called, regardless of who does that - currently this case is not handled by the toolstack, and requires manual script call. Keeping hotplug-status=connected to skip the call is wrong and leads to not configured interface. More discussion at https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20220222001817.2264967-1-marmarek@invisiblethingslab.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* xen/netback: don't queue unlimited number of packagesJuergen Gross2021-12-161-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | In case a guest isn't consuming incoming network traffic as fast as it is coming in, xen-netback is buffering network packages in unlimited numbers today. This can result in host OOM situations. Commit f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") meant to introduce a mechanism to limit the amount of buffered data by stopping the Tx queue when reaching the data limit, but this doesn't work for cases like UDP. When hitting the limit don't queue further SKBs, but drop them instead. In order to be able to tell Rx packages have been dropped increment the rx_dropped statistics counter in this case. It should be noted that the old solution to continue queueing SKBs had the additional problem of an overflow of the 32-bit rx_queue_len value would result in intermittent Tx queue enabling. This is part of XSA-392 Fixes: f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
* xen/netback: fix rx queue stall detectionJuergen Gross2021-12-162-24/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when not using GSO") introduced a security problem in netback, as an interface would only be regarded to be stalled if no slot is available in the rx queue ring page. In case the SKB at the head of the queued requests will need more than one rx slot and only one slot is free the stall detection logic will never trigger, as the test for that is only looking for at least one slot to be free. Fix that by testing for the needed number of slots instead of only one slot being available. In order to not have to take the rx queue lock that often, store the number of needed slots in the queue data. As all SKB dequeue operations happen in the rx queue kernel thread this is safe, as long as the number of needed slots is accessed via READ/WRITE_ONCE() only and updates are always done with the rx queue lock held. Add a small helper for obtaining the number of free slots. This is part of XSA-392 Fixes: 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when not using GSO") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
* net: xen: use eth_hw_addr_set()Jakub Kicinski2021-10-221-2/+4
| | | | | | | | | Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* xen-netback: Remove redundant initialization of variable errColin Ian King2021-10-151-1/+1
| | | | | | | | | | The variable err is being initialized with a value that is never read, it is being updated immediately afterwards. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netback: correct success/error reporting for the SKB-with-fraglist caseJan Beulich2021-09-191-1/+1
| | | | | | | | | | | | When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the special considerations for the head of the SKB no longer apply. Don't mistakenly report ERROR to the frontend for the first entry in the list, even if - from all I can tell - this shouldn't matter much as the overall transmit will need to be considered failed anyway. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netback: take a reference to the RX task threadRoger Pau Monne2021-06-071-0/+6
| | | | | | | | | | | | | | | | | | | | | Do this in order to prevent the task from being freed if the thread returns (which can be triggered by the frontend) before the call to kthread_stop done as part of the backend tear down. Not taking the reference will lead to a use-after-free in that scenario. Such reference was taken before but dropped as part of the rework done in 2ac061ce97f4. Reintroduce the reference taking and add a comment this time explaining why it's needed. This is XSA-374 / CVE-2021-28691. Fixes: 2ac061ce97f4 ('xen/netback: cleanup init and deinit code') Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Cc: stable@vger.kernel.org Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
* xen-netback: Check for hotplug-status existence before watchingMichael Brown2021-04-141-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The logic in connect() is currently written with the assumption that xenbus_watch_pathfmt() will return an error for a node that does not exist. This assumption is incorrect: xenstore does allow a watch to be registered for a nonexistent node (and will send notifications should the node be subsequently created). As of commit 1f2565780 ("xen-netback: remove 'hotplug-status' once it has served its purpose"), this leads to a failure when a domU transitions into XenbusStateConnected more than once. On the first domU transition into Connected state, the "hotplug-status" node will be deleted by the hotplug_status_changed() callback in dom0. On the second or subsequent domU transition into Connected state, the hotplug_status_changed() callback will therefore never be invoked, and so the backend will remain stuck in InitWait. This failure prevents scenarios such as reloading the xen-netfront module within a domU, or booting a domU via iPXE. There is unfortunately no way for the domU to work around this dom0 bug. Fix by explicitly checking for existence of the "hotplug-status" node, thereby creating the behaviour that was previously assumed to exist. Signed-off-by: Michael Brown <mbrown@fensystems.co.uk> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2021-03-101-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau. 2) TX skb error handling fix in mt76 driver, also from Felix. 3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman. 4) Avoid double free of percpu pointers when freeing a cloned bpf prog. From Cong Wang. 5) Use correct printf format for dma_addr_t in ath11k, from Geert Uytterhoeven. 6) Fix resolve_btfids build with older toolchains, from Kun-Chuan Hsieh. 7) Don't report truncated frames to mac80211 in mt76 driver, from Lorenzop Bianconi. 8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang. 9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann. 10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from Arjun Roy. 11) Ignore routes with deleted nexthop object in mlxsw, from Ido Schimmel. 12) Need to undo tcp early demux lookup sometimes in nf_nat, from Florian Westphal. 13) Fix gro aggregation for udp encaps with zero csum, from Daniel Borkmann. 14) Make sure to always use imp*_ndo_send when necessaey, from Jason A. Donenfeld. 15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov. 16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin. 17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir Oltean. 18) Make sure textsearch copntrol block is large enough, from Wilem de Bruijn. 19) Revert MAC changes to r8152 leading to instability, from Hates Wang. 20) Advance iov in 9p even for empty reads, from Jissheng Zhang. 21) Double hook unregister in nftables, from PabloNeira Ayuso. 22) Fix memleak in ixgbe, fropm Dinghao Liu. 23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne. 24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang Tang. 25) Fix DOI refcount bugs in cipso, from Paul Moore. 26) One too many irqsave in ibmvnic, from Junlin Yang. 27) Fix infinite loop with MPLS gso segmenting via virtio_net, from Balazs Nemeth. * git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits) s390/qeth: fix notification for pending buffers during teardown s390/qeth: schedule TX NAPI on QAOB completion s390/qeth: improve completion of pending TX buffers s390/qeth: fix memory leak after failed TX Buffer allocation net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0 net: check if protocol extracted by virtio_net_hdr_set_proto is correct net: dsa: xrs700x: check if partner is same as port in hsr join net: lapbether: Remove netif_start_queue / netif_stop_queue atm: idt77252: fix null-ptr-dereference atm: uPD98402: fix incorrect allocation atm: fix a typo in the struct description net: qrtr: fix error return code of qrtr_sendmsg() mptcp: fix length of ADD_ADDR with port sub-option net: bonding: fix error return code of bond_neigh_init() net: enetc: allow hardware timestamping on TX queues with tc-etf enabled net: enetc: set MAC RX FIFO to recommended value net: davicom: Use platform_get_irq_optional() net: davicom: Fix regulator not turned off on driver removal net: davicom: Fix regulator not turned off on failed probe net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports ...
| * xen-netback: use local var in xenvif_tx_check_gop() instead of re-calculatingJan Beulich2021-03-011-2/+2
| | | | | | | | | | | | | | | | shinfo already holds the result of skb_shinfo(skb) at this point - no need to re-invoke the construct even twice. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xen-netback: respect gnttab_map_refs()'s return valueJan Beulich2021-03-031-1/+11
|/ | | | | | | | | | | | | | | | | Commit 3194a1746e8a ("xen-netback: don't "handle" error by BUG()") dropped respective a BUG_ON() without noticing that with this the variable's value wouldn't be consumed anymore. With gnttab_set_map_op() setting all status fields to a non-zero value, in case of an error no slot should have a status of GNTST_okay (zero). This is part of XSA-367. Cc: <stable@vger.kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/d933f495-619a-0086-5fb4-1ec3cf81a8fc@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
* Merge tag 'for-linus-5.12-rc1-tag' of ↵Linus Torvalds2021-02-211-3/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "A series of Xen related security fixes, all related to limited error handling in Xen backend drivers" * tag 'for-linus-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkback: fix error handling in xen_blkbk_map() xen-scsiback: don't "handle" error by BUG() xen-netback: don't "handle" error by BUG() xen-blkback: don't "handle" error by BUG() xen/arm: don't ignore return errors from set_phys_to_machine Xen/gntdev: correct error checking in gntdev_map_grant_pages() Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages() Xen/x86: also check kernel mapping in set_foreign_p2m_mapping() Xen/x86: don't bail early from clear_foreign_p2m_mapping()
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 21:13:36 +0100