summaryrefslogtreecommitdiffstats
path: root/drivers/net (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steeringYevgeny Kliteynik2020-12-033-0/+7
| | | | | | | | | | | | | | STEs format for Connect-X5 and Connect-X6DX different. Currently, on Connext-X6DX the SW steering would break at some point when building STEs w/o giving a proper error message. Fix this by checking the STE format of the current device when initializing domain: add mlx5_ifc definitions for Connect-X6DX SW steering, read FW capability to get the current format version, and check this version when domain is being created. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net/mlx5e: kTLS, Enforce HW TX csum offload with kTLSTariq Toukan2020-12-031-7/+15
| | | | | | | | | | | | | | Checksum calculation cannot be done in SW for TX kTLS HW offloaded packets. Offload it to the device, disregard the declared state of the TX csum offload feature. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: mlx5e: fix fs_tcp.c build when IPV6 is not enabledRandy Dunlap2020-12-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Fix build when CONFIG_IPV6 is not enabled by making a function be built conditionally. Fixes these build errors and warnings: ../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c: In function 'accel_fs_tcp_set_ipv6_flow': ../include/net/sock.h:380:34: error: 'struct sock_common' has no member named 'skc_v6_daddr'; did you mean 'skc_daddr'? 380 | #define sk_v6_daddr __sk_common.skc_v6_daddr | ^~~~~~~~~~~~ ../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:55:14: note: in expansion of macro 'sk_v6_daddr' 55 | &sk->sk_v6_daddr, 16); | ^~~~~~~~~~~ At top level: ../drivers/net/ethernet/mellanox/mlx5/core/en_accel/fs_tcp.c:47:13: warning: 'accel_fs_tcp_set_ipv6_flow' defined but not used [-Wunused-function] 47 | static void accel_fs_tcp_set_ipv6_flow(struct mlx5_flow_spec *spec, struct sock *sk) Fixes: 5229a96e59ec ("net/mlx5e: Accel, Expose flow steering API for rules add/del") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net/mlx5: Fix wrong address reclaim when command interface is downEran Ben Elisha2020-12-031-2/+19
| | | | | | | | | | | | | | When command interface is down, driver to reclaim all 4K page chucks that were hold by the Firmeware. Fix a bug for 64K page size systems, where driver repeatedly released only the first chunk of the page. Define helper function to fill 4K chunks for a given Firmware pages. Iterate over all unreleased Firmware pages and call the hepler per each. Fixes: 5adff6a08862 ("net/mlx5: Fix incorrect page count when in internal error") Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge tag 'wireless-drivers-2020-12-03' of ↵Jakub Kicinski2020-12-034-10/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.10 Second, and most likely final, set of fixes for v5.10. Small fixes and PCI id addtions. iwlwifi * PCI id additions mt76 * fix a kernel crash during device removal rtw88 * fix uninitialized memory in debugfs code * tag 'wireless-drivers-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: rtw88: debug: Fix uninitialized memory in debugfs code mt76: usb: fix crash on device removal iwlwifi: pcie: add some missing entries for AX210 iwlwifi: pcie: invert values of NO_160 device config entries iwlwifi: pcie: add one missing entry for AX210 iwlwifi: update MAINTAINERS entry ==================== Link: https://lore.kernel.org/r/20201203183408.EE88AC43461@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * rtw88: debug: Fix uninitialized memory in debugfs codeDan Carpenter2020-12-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | This code does not ensure that the whole buffer is initialized and none of the callers check for errors so potentially none of the buffer is initialized. Add a memset to eliminate this bug. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X8ilOfVz3pf0T5ec@mwanda
| * mt76: usb: fix crash on device removalStanislaw Gruszka2020-12-021-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently 'while (q->queued > 0)' loop was removed from mt76u_stop_tx() code. This causes crash on device removal as we try to cleanup empty queue: [ 96.495571] kernel BUG at include/linux/skbuff.h:2297! [ 96.498983] invalid opcode: 0000 [#1] SMP PTI [ 96.501162] CPU: 3 PID: 27 Comm: kworker/3:0 Not tainted 5.10.0-rc5+ #11 [ 96.502754] Hardware name: LENOVO 20DGS08H00/20DGS08H00, BIOS J5ET48WW (1.19 ) 08/27/2015 [ 96.504378] Workqueue: usb_hub_wq hub_event [ 96.505983] RIP: 0010:skb_pull+0x2d/0x30 [ 96.507576] Code: 00 00 8b 47 70 39 c6 77 1e 29 f0 89 47 70 3b 47 74 72 17 48 8b 87 c8 00 00 00 89 f6 48 01 f0 48 89 87 c8 00 00 00 c3 31 c0 c3 <0f> 0b 90 0f 1f 44 00 00 53 48 89 fb 48 8b bf c8 00 00 00 8b 43 70 [ 96.509296] RSP: 0018:ffffb11b801639b8 EFLAGS: 00010287 [ 96.511038] RAX: 000000001c6939ed RBX: ffffb11b801639f8 RCX: 0000000000000000 [ 96.512964] RDX: ffffb11b801639f8 RSI: 0000000000000018 RDI: ffff90c64e4fb800 [ 96.514710] RBP: ffff90c654551ee0 R08: ffff90c652bce7a8 R09: ffffb11b80163728 [ 96.516450] R10: 0000000000000001 R11: 0000000000000001 R12: ffff90c64e4fb800 [ 96.519749] R13: 0000000000000010 R14: 0000000000000020 R15: ffff90c64e352ce8 [ 96.523455] FS: 0000000000000000(0000) GS:ffff90c96eec0000(0000) knlGS:0000000000000000 [ 96.527171] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 96.530900] CR2: 0000242556f18288 CR3: 0000000146a10002 CR4: 00000000003706e0 [ 96.534678] Call Trace: [ 96.538418] mt76x02u_tx_complete_skb+0x1f/0x50 [mt76x02_usb] [ 96.542231] mt76_queue_tx_complete+0x23/0x50 [mt76] [ 96.546028] mt76u_stop_tx.cold+0x71/0xa2 [mt76_usb] [ 96.549797] mt76x0u_stop+0x2f/0x90 [mt76x0u] [ 96.553638] drv_stop+0x33/0xd0 [mac80211] [ 96.557449] ieee80211_do_stop+0x558/0x860 [mac80211] [ 96.561262] ? dev_deactivate_many+0x298/0x2d0 [ 96.565101] ieee80211_stop+0x16/0x20 [mac80211] Fix that by adding while loop again. We need loop, not just single check, to clean all pending entries. Additionally move mt76_worker_disable/enable after !mt76_has_tx_pending() as we want to tx_worker to run to process tx queues, while we wait for exactly that. I was a bit worried about accessing q->queued without lock, but mt76_worker_disable() -> kthread_park() should assure this value will be seen updated on other cpus. Fixes: fe5b5ab52e9d ("mt76: unify queue tx cleanup code") Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201126125520.72912-1-stf_xl@wp.pl
| * iwlwifi: pcie: add some missing entries for AX210Golan Ben Ami2020-12-021-0/+5
| | | | | | | | | | | | | | | | | | | | | | Some subsytem device IDs were missing from the list, so some AX210 devices were not recognized. Add them. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201202143859.a06ba7540449.I7390305d088a49c1043c9b489154fe057989c18f@changeid Link: https://lore.kernel.org/r/20201121003411.9450-1-ikegami.t@gmail.com
| * iwlwifi: pcie: invert values of NO_160 device config entriesLuca Coelho2020-12-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The NO_160 flag specifies if the device doesn't have 160 MHz support, but we errorneously assumed the opposite. If the flag was set, we were considering that 160 MHz was supported, but it's actually the opposite. Fix it by inverting the bits, i.e. NO_160 is 0x1 and 160 is 0x0. Fixes: d6f2134a3831 ("iwlwifi: add mac/rf types and 160MHz to the device tables") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201202143859.375bec857ccb.I83884286b688965293e9810381808039bd7eedae@changeid
| * iwlwifi: pcie: add one missing entry for AX210Luca Coelho2020-12-021-0/+1
| | | | | | | | | | | | | | | | | | The 0x0024 subsytem device ID was missing from the list, so some AX210 devices were not recognized. Add it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201202143859.308eab4db42c.I3763196cd3f7bb36f3dcabf02ec4e7c4fe859c0f@changeid
* | net: mvpp2: Fix error return code in mvpp2_open()Wang Hai2020-12-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix to return negative error code -ENOENT from invalid configuration error handling case instead of 0, as done elsewhere in this function. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201203141806.37966-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | chelsio/chtls: fix a double free in chtls_setkey()Dan Carpenter2020-12-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The "skb" is freed by the transmit code in cxgb4_ofld_send() and we shouldn't use it again. But in the current code, if we hit an error later on in the function then the clean up code will call kfree_skb(skb) and so it causes a double free. Set the "skb" to NULL and that makes the kfree_skb() a no-op. Fixes: d25f2f71f653 ("crypto: chtls - Program the TLS session Key") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X8ilb6PtBRLWiSHp@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | vxlan: fix error return code in __vxlan_dev_create()Zhang Changzhong2020-12-031-1/+3
| | | | | | | | | | | | | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1606903122-2098-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: pasemi: fix error return code in pasemi_mac_open()Zhang Changzhong2020-12-031-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 72b05b9940f0 ("pasemi_mac: RX/TX ring management cleanup") Fixes: 8d636d8bc5ff ("pasemi_mac: jumbo frame support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1606903035-1838-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | cxgb3: fix error return code in t3_sge_alloc_qset()Zhang Changzhong2020-12-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: b1fb1f280d09 ("cxgb3 - Fix dma mapping error path") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Raju Rangoju <rajur@chelsio.com> Link: https://lore.kernel.org/r/1606902965-1646-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | dpaa_eth: copy timestamp fields to new skb in A-050385 workaroundYangbo Lu2020-12-021-1/+9
| | | | | | | | | | | | | | | | | | | | | | The timestamp fields should be copied to new skb too in A-050385 workaround for later TX timestamping handling. Fixes: 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Link: https://lore.kernel.org/r/20201201075258.1875-1-yangbo.lu@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | geneve: pull IP header before ECN decapsulationEric Dumazet2020-12-021-4/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IP_ECN_decapsulate() and IP6_ECN_decapsulate() assume IP header is already pulled. geneve does not ensure this yet. Fixing this generically in IP_ECN_decapsulate() and IP6_ECN_decapsulate() is not possible, since callers pass a pointer that might be freed by pskb_may_pull() syzbot reported : BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:238 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate+0x345/0x1db0 include/net/inet_ecn.h:260 CPU: 1 PID: 8941 Comm: syz-executor.0 Not tainted 5.10.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197 __INET_ECN_decapsulate include/net/inet_ecn.h:238 [inline] INET_ECN_decapsulate+0x345/0x1db0 include/net/inet_ecn.h:260 geneve_rx+0x2103/0x2980 include/net/inet_ecn.h:306 geneve_udp_encap_recv+0x105c/0x1340 drivers/net/geneve.c:377 udp_queue_rcv_one_skb+0x193a/0x1af0 net/ipv4/udp.c:2093 udp_queue_rcv_skb+0x282/0x1050 net/ipv4/udp.c:2167 udp_unicast_rcv_skb net/ipv4/udp.c:2325 [inline] __udp4_lib_rcv+0x399d/0x5880 net/ipv4/udp.c:2394 udp_rcv+0x5c/0x70 net/ipv4/udp.c:2564 ip_protocol_deliver_rcu+0x572/0xc50 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_local_deliver+0x583/0x8d0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:449 [inline] ip_rcv_finish net/ipv4/ip_input.c:428 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_rcv+0x5c3/0x840 net/ipv4/ip_input.c:539 __netif_receive_skb_one_core net/core/dev.c:5315 [inline] __netif_receive_skb+0x1ec/0x640 net/core/dev.c:5429 process_backlog+0x523/0xc10 net/core/dev.c:6319 napi_poll+0x420/0x1010 net/core/dev.c:6763 net_rx_action+0x35c/0xd40 net/core/dev.c:6833 __do_softirq+0x1a9/0x6fa kernel/softirq.c:298 asm_call_irq_on_stack+0xf/0x20 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline] do_softirq_own_stack+0x6e/0x90 arch/x86/kernel/irq_64.c:77 do_softirq kernel/softirq.c:343 [inline] __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:195 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:730 [inline] __dev_queue_xmit+0x3a9b/0x4520 net/core/dev.c:4167 dev_queue_xmit+0x4b/0x60 net/core/dev.c:4173 packet_snd net/packet/af_packet.c:2992 [inline] packet_sendmsg+0x86f9/0x99d0 net/packet/af_packet.c:3017 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] __sys_sendto+0x9dc/0xc80 net/socket.c:1992 __do_sys_sendto net/socket.c:2004 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2000 __x64_sys_sendto+0x6e/0x90 net/socket.c:2000 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20201201090507.4137906-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: broadcom CNIC: requires MMURandy Dunlap2020-12-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CNIC kconfig symbol selects UIO and UIO depends on MMU. Since 'select' does not follow dependency chains, add the same MMU dependency to CNIC. Quietens this kconfig warning: WARNING: unmet direct dependencies detected for UIO Depends on [n]: MMU [=n] Selected by [m]: - CNIC [=m] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n) Fixes: adfc5217e9db ("broadcom: Move the Broadcom drivers") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rasesh Mody <rmody@marvell.com> Cc: GR-Linux-NIC-Dev@marvell.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20201129070843.3859-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: Fix TX completion error handlingThomas Falcon2020-12-011-3/+1
| | | | | | | | | | | | | | | | | | | | | | TX completions received with an error return code are not being processed properly. When an error code is seen, do not proceed to the next completion before cleaning up the existing entry's data structures. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ibmvnic: Ensure that SCRQ entry reads are correctly orderedThomas Falcon2020-12-011-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure that received Subordinate Command-Response Queue (SCRQ) entries are properly read in order by the driver. These queues are used in the ibmvnic device to process RX buffer and TX completion descriptors. dma_rmb barriers have been added after checking for a pending descriptor to ensure the correct descriptor entry is checked and after reading the SCRQ descriptor to ensure the entire descriptor is read before processing. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'linux-can-fixes-for-5.10-20201130' of ↵Jakub Kicinski2020-12-015-15/+20
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-30 The first patch is by me an target the tcan4x5x bindings for the m_can driver. It fixes the error path in the tcan4x5x_can_probe() function. The next two patches are by Jeroen Hofstee and makes the lost of arbitration error counters of sja1000 and the sun4i drivers consistent with the other drivers. Zhang Qilong contributes two patch that clean up the error path in the c_can and kvaser_pciefd drivers. * tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: kvaser_pciefd: kvaser_pciefd_open(): fix error handling can: c_can: c_can_power_up(): fix error handling can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an error can: sja1000: sja1000_err(): don't count arbitration lose as an error can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous clk_disable_unprepare() ==================== Link: https://lore.kernel.org/r/20201130125307.218258-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | can: kvaser_pciefd: kvaser_pciefd_open(): fix error handlingZhang Qilong2020-11-301-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If kvaser_pciefd_bus_on() failed, we should call close_candev() to avoid reference leak. Fixes: 26ad340e582d3 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201128133922.3276973-3-zhangqilong3@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * | can: c_can: c_can_power_up(): fix error handlingZhang Qilong2020-11-301-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the error handling in c_can_power_up(), there are two bugs: 1) c_can_pm_runtime_get_sync() will increase usage counter if device is not empty. Forgetting to call c_can_pm_runtime_put_sync() will result in a reference leak here. 2) c_can_reset_ram() operation will set start bit when enable is true. We should clear it in the error handling. We fix it by adding c_can_pm_runtime_put_sync() for 1), and c_can_reset_ram(enable is false) for 2) in the error handling. Fixes: 8212003260c60 ("can: c_can: Add d_can suspend resume support") Fixes: 52cde85acc23f ("can: c_can: Add d_can raminit support") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201128133922.3276973-2-zhangqilong3@huawei.com [mkl: return "0" instead of "ret"] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * | can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an errorJeroen Hofstee2020-11-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Losing arbitration is normal in a CAN-bus network, it means that a higher priority frame is being send and the pending message will be retried later. Hence most driver only increment arbitration_lost, but the sun4i driver also incremeants tx_error, causing errors to be reported on a normal functioning CAN-bus. So stop counting them as errors. Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module") Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Link: https://lore.kernel.org/r/20201127095941.21609-1-jhofstee@victronenergy.com [mkl: split into two seperate patches] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * | can: sja1000: sja1000_err(): don't count arbitration lose as an errorJeroen Hofstee2020-11-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Losing arbitration is normal in a CAN-bus network, it means that a higher priority frame is being send and the pending message will be retried later. Hence most driver only increment arbitration_lost, but the sja1000 driver also incremeants tx_error, causing errors to be reported on a normal functioning CAN-bus. So stop counting them as errors. Fixes: 8935f57e68c4 ("can: sja1000: fix network statistics update") Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Link: https://lore.kernel.org/r/20201127095941.21609-1-jhofstee@victronenergy.com [mkl: split into two seperate patches] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * | can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous ↵Marc Kleine-Budde2020-11-301-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk_disable_unprepare() The clocks mcan_class->cclk and mcan_class->hclk are not prepared by any call during tcan4x5x_can_probe(), so remove erroneous clk_disable_unprepare() on them. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Link: http://lore.kernel.org/r/20201130114252.215334-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | | vxlan: Copy needed_tailroom from lowerdevSven Eckelmann2020-12-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While vxlan doesn't need any extra tailroom, the lowerdev might need it. In that case, copy it over to reduce the chance for additional (re)allocations in the transmit path. Signed-off-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20201126125247.1047977-2-sven@narfation.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | vxlan: Add needed_headroom for lower deviceSven Eckelmann2020-12-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was observed that sending data via batadv over vxlan (on top of wireguard) reduced the performance massively compared to raw ethernet or batadv on raw ethernet. A check of perf data showed that the vxlan_build_skb was calling all the time pskb_expand_head to allocate enough headroom for: min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len + VXLAN_HLEN + iphdr_len; But the vxlan_config_apply only requested needed headroom for: lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM So it completely ignored the needed_headroom of the lower device. The first caller of net_dev_xmit could therefore never make sure that enough headroom was allocated for the rest of the transmit path. Cc: Annika Wickert <annika.wickert@exaring.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Tested-by: Annika Wickert <aw@awlnx.space> Link: https://lore.kernel.org/r/20201126125247.1047977-1-sven@narfation.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | chelsio/chtls: fix panic during unload reload chtlsVinay Kumar Yadav2020-12-011-0/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | there is kernel panic in inet_twsk_free() while chtls module unload when socket is in TIME_WAIT state because sk_prot_creator was not preserved on connection socket. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Udai Sharma <udai.sharma@chelsio.com> Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201125214913.16938-1-vinay.yadav@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: reduce wait for completion timeDany Madden2020-11-281-3/+3
| | | | | | | | | | | | | | | | | | | | Reduce the wait time for Command Response Queue response from 30 seconds to 20 seconds, as recommended by VIOS and Power Hypervisor teams. Fixes: bd0b672313941 ("ibmvnic: Move login and queue negotiation into ibmvnic_open") Fixes: 53da09e92910f ("ibmvnic: Add set_link_state routine for setting adapter link state") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: no reset timeout for 5 seconds after resetDany Madden2020-11-282-2/+11
| | | | | | | | | | | | | | | | | | | | Reset timeout is going off right after adapter reset. This patch ensures that timeout is scheduled if it has been 5 seconds since the last reset. 5 seconds is the default watchdog timeout. Fixes: ed651a10875f1 ("ibmvnic: Updated reset handling") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: send_login should check for crq errorsDany Madden2020-11-281-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | send_login() does not check for the result of ibmvnic_send_crq() of the login request. This results in the driver needlessly retrying the login 10 times even when CRQ is no longer active. Check the return code and give up in case of errors in sending the CRQ. The only time we want to retry is if we get a PARITALSUCCESS response from the partner. Fixes: 032c5e82847a2 ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: track pending loginSukadev Bhattiprolu2020-11-282-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | If after ibmvnic sends a LOGIN it gets a FAILOVER, it is possible that the worker thread will start reset process and free the login response buffer before it gets a (now stale) LOGIN_RSP. The ibmvnic tasklet will then try to access the login response buffer and crash. Have ibmvnic track pending logins and discard any stale login responses. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: delay next reset if hard reset failsSukadev Bhattiprolu2020-11-281-0/+8
| | | | | | | | | | | | | | | | | | | | If auto-priority failover is enabled, the backing device needs time to settle if hard resetting fails for any reason. Add a delay of 60 seconds before retrying the hard-reset. Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: restore adapter state on failed resetDany Madden2020-11-281-31/+36
| | | | | | | | | | | | | | | | | | | | | | | | In a failed reset, driver could end up in VNIC_PROBED or VNIC_CLOSED state and cannot recover in subsequent resets, leaving it offline. This patch restores the adapter state to reset_state, the original state when reset was called. Fixes: b27507bb59ed5 ("net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run") Fixes: 2770a7984db58 ("ibmvnic: Introduce hard reset recovery") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: avoid memset null scrq msgsDany Madden2020-11-281-4/+15
| | | | | | | | | | | | | | | | | | | | scrq->msgs could be NULL during device reset, causing Linux to crash. So, check before memset scrq->msgs. Fixes: c8b2ad0a4a901 ("ibmvnic: Sanitize entire SCRQ buffer on reset") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: stop free_all_rwi on failed resetDany Madden2020-11-281-19/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | When ibmvnic fails to reset, it breaks out of the reset loop and frees all of the remaining resets from the workqueue. Doing so prevents the adapter from recovering if no reset is scheduled after that. Instead, have the driver continue to process resets on the workqueue. Remove the no longer need free_all_rwi(). Fixes: ed651a10875f1 ("ibmvnic: Updated reset handling") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: handle inconsistent login with resetDany Madden2020-11-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Inconsistent login with the vnicserver is causing the device to be removed. This does not give the device a chance to recover from error state. This patch schedules a FATAL reset instead to bring the adapter up. Fixes: 032c5e82847a2 ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0Pankaj Sharma2020-11-271-0/+2
| | | | | | | | | | | | | | | | | | | | Add support for mcan bit timing and control mode according to bosch mcan IP version 3.3.0. The mcan version read from the Core Release field of CREL register would be 33. Accordingly the properties are to be set for mcan v3.3.0 Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com> Link: https://lore.kernel.org/r/1606366302-5520-1-git-send-email-pankj.sharma@samsung.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: m_can: fix nominal bitiming tseg2 min for version >= 3.1Marc Kleine-Budde2020-11-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At lest the revision 3.3.0 of the bosch m_can IP core specifies that valid register values for "Nominal Time segment after sample point (NTSEG2)" are from 1 to 127. As the hardware uses a value of one more than the programmed value, mean tseg2_min is 2. This patch fixes the tseg2_min value accordingly. Cc: Dan Murphy <dmurphy@ti.com> Cc: Mario Huettel <mario.huettel@gmx.net> Acked-by: Sriram Dash <sriram.dash@samsung.com> Link: https://lore.kernel.org/r/20201124190751.3972238-1-mkl@pengutronix.de Fixes: b03cfc5bb0e1 ("can: m_can: Enable M_CAN version dependent initialization") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from ↵Marc Kleine-Budde2020-11-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | request_threaded_irq()'s flags The threaded IRQ handler is used for the tcan4x5x driver only. The IRQ pin of the tcan4x5x controller is active low, so better not use IRQF_TRIGGER_FALLING when requesting the IRQ. As this can result in missing interrupts. Further, if the device tree specified the interrupt as "IRQ_TYPE_LEVEL_LOW", unloading and reloading of the driver results in the following error during ifup: | irq: type mismatch, failed to map hwirq-31 for gpio@20a8000! | tcan4x5x spi1.1: m_can device registered (irq=0, version=32) | tcan4x5x spi1.1 can2: TCAN4X5X successfully initialized. | tcan4x5x spi1.1 can2: failed to request interrupt This patch fixes the problem by removing the IRQF_TRIGGER_FALLING from the request_threaded_irq(). Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Cc: Dan Murphy <dmurphy@ti.com> Cc: Sriram Dash <sriram.dash@samsung.com> Cc: Pankaj Sharma <pankj.sharma@samsung.com> Link: https://lore.kernel.org/r/20201127093548.509253-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was givenMarc Kleine-Budde2020-11-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | This patch add a check to the mcp251xfd_probe() function to bail out and give the user a proper error message if no IRQ is specified. Otherwise the driver will probe just fine but ifup will fail with a meaningless "RTNETLINK answers: Invalid argument" error message. Link: https://lore.kernel.org/r/20201123113522.3820052-1-mkl@pengutronix.de Reported-by: Niels Petter <petter@ka-long.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | can: gs_usb: fix endianess problem with candleLight firmwareMarc Kleine-Budde2020-11-261-61/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The firmware on the original USB2CAN by Geschwister Schneider Technologie Entwicklungs- und Vertriebs UG exchanges all data between the host and the device in host byte order. This is done with the struct gs_host_config::byte_order member, which is sent first to indicate the desired byte order. The widely used open source firmware candleLight doesn't support this feature and exchanges the data in little endian byte order. This breaks if a device with candleLight firmware is used on big endianess systems. To fix this problem, all u32 (but not the struct gs_host_frame::echo_id, which is a transparent cookie) are converted to __le32. Cc: Maximilian Schneider <max@schneidersoft.net> Cc: Hubert Denkmair <hubert@denkmair.de> Reported-by: Michael Rausch <mr@netadair.de> Link: https://lore.kernel.org/r/b58aace7-61f3-6df7-c6df-69fee2c66906@netadair.de Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/r/20201120103818.3386964-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
* | ch_ktls: lock is not freedRohit Maheshwari2020-11-261-1/+3
| | | | | | | | | | | | | | | | | | | | Currently lock gets freed only if timeout expires, but missed a case when HW returns failure and goes for cleanup. Fixes: efca3878a5fb ("ch_ktls: Issue if connection offload fails") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Link: https://lore.kernel.org/r/20201125072626.10861-1-rohitm@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | enetc: Let the hardware auto-advance the taprio base-time of 0Vladimir Oltean2020-11-251-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tc-taprio base time indicates the beginning of the tc-taprio schedule, which is cyclic by definition (where the length of the cycle in nanoseconds is called the cycle time). The base time is a 64-bit PTP time in the TAI domain. Logically, the base-time should be a future time. But that imposes some restrictions to user space, which has to retrieve the current PTP time from the NIC first, then calculate a base time that will still be larger than the base time by the time the kernel driver programs this value into the hardware. Actually ensuring that the programmed base time is in the future is still a problem even if the kernel alone deals with this. Luckily, the enetc hardware already advances a base-time that is in the past into a congruent time in the immediate future, according to the same formula that can be found in the software implementation of taprio (in taprio_get_start_time): /* Schedule the start time for the beginning of the next * cycle. */ n = div64_s64(ktime_sub_ns(now, base), cycle); *start = ktime_add_ns(base, (n + 1) * cycle); There's only one problem: the driver doesn't let the hardware do that. It interferes with the base-time passed from user space, by special-casing the situation when the base-time is zero, and replaces that with the current PTP time. This changes the intended effective base-time of the schedule, which will in the end have a different phase offset than if the base-time of 0.000000000 was to be advanced by an integer multiple of the cycle-time. Fixes: 34c6adf1977b ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20201124220259.3027991-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: stmmac: fix incorrect merge of patch upstreamAntonio Borneo2020-11-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 757926247836 ("net: stmmac: add flexible PPS to dwmac 4.10a") was intended to modify the struct dwmac410_ops, but it got somehow badly merged and modified the struct dwmac4_ops. Revert the modification in struct dwmac4_ops and re-apply it properly in struct dwmac410_ops. Fixes: 757926247836 ("net: stmmac: add flexible PPS to dwmac 4.10a") Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20201124223729.886992-1-antonio.borneo@st.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: enhance resetting status check during module exitLijun Pan2020-11-252-4/+2
| | | | | | | | | | | | | | | | | | | | | | Based on the discussion with Sukadev Bhattiprolu and Dany Madden, we believe that checking adapter->resetting bit is preferred since RESETTING state flag is not as strict as resetting bit. RESETTING state flag is removed since it is verbose now. Fixes: 7d7195a026ba ("ibmvnic: Do not process device remove during device reset") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: fix NULL pointer dereference in ibmvic_reset_crqLijun Pan2020-11-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | crq->msgs could be NULL if the previous reset did not complete after freeing crq->msgs. Check for NULL before dereferencing them. Snippet of call trace: ... ibmvnic 30000003 env3 (unregistering): Releasing sub-CRQ ibmvnic 30000003 env3 (unregistering): Releasing CRQ BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0000000000c1a30 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(E-) rpadlpar_io rpaphp xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables xsk_diag tcp_diag udp_diag tun raw_diag inet_diag unix_diag bridge af_packet_diag netlink_diag stp llc rfkill sunrpc pseries_rng xts vmx_crypto uio_pdrv_genirq uio binfmt_misc ip_tables xfs libcrc32c sd_mod t10_pi sg ibmvscsi ibmveth scsi_transport_srp dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ibmvnic] CPU: 20 PID: 8426 Comm: kworker/20:0 Tainted: G E 5.10.0-rc1+ #12 Workqueue: events __ibmvnic_reset [ibmvnic] NIP: c0000000000c1a30 LR: c008000001b00c18 CTR: 0000000000000400 REGS: c00000000d05b7a0 TRAP: 0380 Tainted: G E (5.10.0-rc1+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44002480 XER: 20040000 CFAR: c0000000000c19ec IRQMASK: 0 GPR00: 0000000000000400 c00000000d05ba30 c008000001b17c00 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 00000000000001e2 GPR08: 000000000001f400 ffffffffffffd950 0000000000000000 c008000001b0b280 GPR12: c0000000000c19c8 c00000001ec72e00 c00000000019a778 c00000002647b440 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000006 0000000000000001 0000000000000003 0000000000000002 GPR24: 0000000000001000 c008000001b0d570 0000000000000005 c00000007ab5d550 GPR28: c00000007ab5c000 c000000032fcf848 c00000007ab5cc00 c000000032fcf800 NIP [c0000000000c1a30] memset+0x68/0x104 LR [c008000001b00c18] ibmvnic_reset_crq+0x70/0x110 [ibmvnic] Call Trace: [c00000000d05ba30] [0000000000000800] 0x800 (unreliable) [c00000000d05bab0] [c008000001b0a930] do_reset.isra.40+0x224/0x634 [ibmvnic] [c00000000d05bb80] [c008000001b08574] __ibmvnic_reset+0x17c/0x3c0 [ibmvnic] [c00000000d05bc50] [c00000000018d9ac] process_one_work+0x2cc/0x800 [c00000000d05bd20] [c00000000018df58] worker_thread+0x78/0x520 [c00000000d05bdb0] [c00000000019a934] kthread+0x1c4/0x1d0 [c00000000d05be20] [c00000000000d5d0] ret_from_kernel_thread+0x5c/0x6c Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: fix NULL pointer dereference in reset_sub_crq_queuesLijun Pan2020-11-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | adapter->tx_scrq and adapter->rx_scrq could be NULL if the previous reset did not complete after freeing sub crqs. Check for NULL before dereferencing them. Snippet of call trace: ibmvnic 30000006 env6: Releasing sub-CRQ ibmvnic 30000006 env6: Releasing CRQ ... ibmvnic 30000006 env6: Got Control IP offload Response ibmvnic 30000006 env6: Re-setting tx_scrq[0] BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc008000003dea7cc Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables xsk_diag tcp_diag udp_diag raw_diag inet_diag unix_diag af_packet_diag netlink_diag tun bridge stp llc rfkill sunrpc pseries_rng xts vmx_crypto uio_pdrv_genirq uio binfmt_misc ip_tables xfs libcrc32c sd_mod t10_pi sg ibmvscsi ibmvnic ibmveth scsi_transport_srp dm_mirror dm_region_hash dm_log dm_mod CPU: 80 PID: 1856 Comm: kworker/80:2 Tainted: G W 5.8.0+ #4 Workqueue: events __ibmvnic_reset [ibmvnic] NIP: c008000003dea7cc LR: c008000003dea7bc CTR: 0000000000000000 REGS: c0000007ef7db860 TRAP: 0380 Tainted: G W (5.8.0+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28002422 XER: 0000000d CFAR: c000000000bd9520 IRQMASK: 0 GPR00: c008000003dea7bc c0000007ef7dbaf0 c008000003df7400 c0000007fa26ec00 GPR04: c0000007fcd0d008 c0000007fcd96350 0000000000000027 c0000007fcd0d010 GPR08: 0000000000000023 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000002000 c00000001ec18e00 c0000000001982f8 c0000007bad6e840 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 fffffffffffffef7 GPR24: 0000000000000402 c0000007fa26f3a8 0000000000000003 c00000016f8ec048 GPR28: 0000000000000000 0000000000000000 0000000000000000 c0000007fa26ec00 NIP [c008000003dea7cc] ibmvnic_reset_init+0x15c/0x258 [ibmvnic] LR [c008000003dea7bc] ibmvnic_reset_init+0x14c/0x258 [ibmvnic] Call Trace: [c0000007ef7dbaf0] [c008000003dea7bc] ibmvnic_reset_init+0x14c/0x258 [ibmvnic] (unreliable) [c0000007ef7dbb80] [c008000003de8860] __ibmvnic_reset+0x408/0x970 [ibmvnic] [c0000007ef7dbc50] [c00000000018b7cc] process_one_work+0x2cc/0x800 [c0000007ef7dbd20] [c00000000018bd78] worker_thread+0x78/0x520 [c0000007ef7dbdb0] [c0000000001984c4] kthread+0x1d4/0x1e0 [c0000007ef7dbe20] [c00000000000cea8] ret_from_kernel_thread+0x5c/0x74 Fixes: 57a49436f4e8 ("ibmvnic: Reset sub-crqs during driver reset") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: ena: fix packet's addresses for rx_offset featureShay Agroskin2020-11-251-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes two lines in which the rx_offset received by the device wasn't taken into account: - prefetch function: In our driver the copied data would reside in rx_info->page + rx_headroom + rx_offset so the prefetch function is changed accordingly. - setting page_offset to zero for descriptors > 1: for every descriptor but the first, the rx_offset is zero. Hence the page_offset value should be set to rx_headroom. The previous implementation changed the value of rx_info after the descriptor was added to the SKB (essentially providing wrong page offset). Fixes: 68f236df93a9 ("net: ena: add support for the rx offset feature") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 16:34:07 +0100