summaryrefslogtreecommitdiffstats
path: root/drivers/net (follow)
Commit message (Collapse)AuthorAgeFilesLines
* netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYsDavid Daney2012-06-282-9/+98
| | | | | | | | | | | | | | | | | | | | | | | The IEEE802.3 clause 45 MDIO bus protocol allows for directly addressing PHY registers using a 21 bit address, and is used by many 10G Ethernet PHYS. Already existing is the ability of MDIO bus drivers to use clause 45, with the MII_ADDR_C45 flag. Here we add struct phy_c45_device_ids to hold the device identifier registers present in clause 45. struct phy_device gets a couple of new fields: c45_ids to hold the identifiers and is_c45 to signal that it is clause 45. get_phy_device() gets a new parameter is_c45 to indicate that the PHY device should use the clause 45 protocol, and its callers are adjusted to pass false. The follow-on patch to of_mdio.c will pass true where appropriate. EXPORT phy_device_create() so that the follow-on patch to of_mdio.c can use it to create phy devices for PHYs, that have non-standard device identifier registers, based on the device tree bindings. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fec: add phy-reset-duration for device tree probeShawn Guo2012-06-281-1/+7
| | | | | | | | | Different boards may require different phy reset duration. Add property phy-reset-duration for device tree probe, so that the boards that need a longer reset duration can specify it in their device tree. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fec: use managed function devm_gpio_request_oneShawn Guo2012-06-281-1/+2
| | | | | | | | | Using gpio_request_one will require the probe fail-out call gpio_free, which is missing currently. Change to use devm_gpio_request_one to fix the problem. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fec: enable regulator for fec phyShawn Guo2012-06-281-0/+13
| | | | | | | | | If bootloader or platform initialization code does not enable the power supply to fec phy, we need to do it in fec driver before calling fec_reset_phy to have the phy powered on. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fec: reset phy after pinctrl setupShawn Guo2012-06-281-2/+2
| | | | | | | | | | | In case that bootloader or platform initialization does not set up fec pins, the fec_reset_phy will not be able to succeed, because fec_reset_phy is currently called before devm_pinctrl_get_select_default. Move fec_reset_phy call to the place between devm_pinctrl_get_select_default and fec_enet_init to have above case be taken care. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Add missing netif_tx_disable() in bnx2_close()Michael Chan2012-06-281-2/+3
| | | | | | | to stop all tx queues. Update version to 2.2.3. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2: Add "fall through" commentsMichael Chan2012-06-281-0/+4
| | | | | | | to indicate that the mising break statements are intended. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cnic: Handle RAMROD_CMD_ID_CLOSE error.Eddie Wai2012-06-282-2/+11
| | | | | | | | | If firmware returns error status, proceed to close the iSCSI connection. Update version to 2.5.11. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cnic: Remove uio mem[0].Michael Chan2012-06-281-4/+1
| | | | | | | | This memory region is no longer used. Userspace gets the BAR address directly from sysfs. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cnic: Read bnx2x function number from internal registerEddie Wai2012-06-281-1/+7
| | | | | | | | so that it will work on any hypervisor. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cnic: Fix occasional NULL pointer dereference during reboot.Michael Chan2012-06-281-2/+7
| | | | | | | | | | | | | | | We register with bnx2x before we allocate ctx_tbl structure, so it is possible for bnx2x to call cnic_ctl before the structure is allocated. This can sometimes cause NULL pointer dereference of cp->ctx_tbl. We fix this by adding simple checking for valid state before proceeding. The cnic_ctl call is RCU protected so we don't have to deal with race conditions. Because of the additional checking, we need to finish the shutdown before clearing the CNIC_UP flag. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Fix to trim skb for padded vlan packets to workaround an ASIC BugSomnath Kotur2012-06-272-14/+47
| | | | | | | | | Fixed spelling error in a comment as pointed out by DaveM. Also refactored existing code a bit to provide placeholders for another ASIC Bug workaround that will be checked-in soon after this. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sh_eth: add support for set_ringparam/get_ringparamYoshihiro Shimoda2012-06-272-33/+112
| | | | | | | This patch supports the ethtool's set_ringparam() and get_ringparam(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sh_eth: fix up the buffer pointersYoshihiro Shimoda2012-06-271-7/+24
| | | | | | | | After freeing the buffer, the driver should change the value of the pointer to NULL. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sh_eth: remove unnecessary members/definitionsYoshihiro Shimoda2012-06-272-75/+1
| | | | | | | | This patch removes unnecessary members in sh_th_private. This patch also removes unnecessary definitions in sh_eth.h Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: sh_eth: remove unnecessary functionYoshihiro Shimoda2012-06-272-23/+0
| | | | | | | | The sh_eth_timer() called mod_timer() for itself. So, this patch removes the function. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Change bnx2x_tests_str_arr to static charMerav Sicron2012-06-271-1/+1
| | | | | | | | | | This patch changes the definition of bnx2x_tests_str_arr from char to static char. This correction will also eliminate the sparse warning created in commit cf2c1df62e065bfc15e38daf2d3479a56b320f29. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x, bnx2fc, bnx2i, cnic: Add statistics support and FCoE capabilities ↵Barak Witkowski2012-06-276-125/+226
| | | | | | | | | | | | | | | | advertisement 1. When FCoE offload driver is registered, copy its capabilities to the chip scratchpad. 2. Copy FCoE/iSCSI MAC addresses in aligned manner to chip scratchpad. 3. Add FCoE/iSCSI statistics collection support Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* team: do not allow to map disabled portsJiri Pirko2012-06-272-4/+4
| | | | | Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* team: fix team_adjust_ops with regard to enabled portsJiri Pirko2012-06-271-11/+19
| | | | | | | | team_adjust_ops should check for enabled ports, not all ports. This may lead to division by zero. This patch fixes this. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: simplify a check in qmi_wwan_bind()Dan Carpenter2012-06-271-2/+2
| | | | | | | | | This code is easier to read if we specify which flags we want at the condition instead of at the top of the function. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/sh-eth: Check return value of sh_eth_reset when chip reset failNobuhiro Iwamatsu2012-06-261-32/+56
| | | | | | | | The sh_eth_reset function resets chip, but this performs nothing when failed. This changes sh_eth_reset return an error, when this failed in reset. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/sh-eth: Add support selecting MII function for SH7734 and R8A7740Nobuhiro Iwamatsu2012-06-262-43/+66
| | | | | | | | | Ethernet IP of SH7734 and R8A7740 has selecting MII register. The user needs to change a value according to MII to be used. This adds the function to change the value of this register. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* caif-hsi: Remove use of module parametersSjur Brændeland2012-06-261-79/+72
| | | | | | | | | | | Remove use of module parameters on caif hsi device, as rtnl configuration parameters are already supported. All caif hsi configuration data is put in cfhsi_config, and default values in hsi_default_config. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* caif-hsi: Replace platform device with ops structure.Sjur Brændeland2012-06-261-58/+51
| | | | | | | | | | | | Remove use of struct platform_device, and replace it with struct cfhsi_ops. Updated variable names in the same spirit: cfhsi_get_dev to cfhsi_get_ops, cfhsi->dev to cfhsi->ops and, cfhsi->dev.drv to cfhsi->ops->cb_ops. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* caif-hsi: Add rtnl supportSjur Brændeland2012-06-261-89/+137
| | | | | | | | | Add RTNL support for managing the caif hsi interface. The HSI HW interface is no longer registering as a device, instead we use symbol_get to get hold of the HSI API. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* caif-hsi: Remove uncecessary assignmentsSjur Brændeland2012-06-261-5/+5
| | | | | | | Remove assignment at declaration when not needed. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericssion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* caif-hsi: Use netdev_X instead of dev_X for printingSjur Brændeland2012-06-261-47/+47
| | | | | | | | Replace dev_X with the corresponding netdev_X print function when applicable. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericssion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* caif-hsi: changed test on aggregation_timeoutKim Lilliestierna XX2012-06-261-1/+1
| | | | | | | | | | Aggregation_timeout is an unsigned long, a test for less than zero can never become true, compare with zero instead. Signed-off-by: Kim Lilliestierna <kim.xx.lilliestierna@stericsson.com> Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* caif-hsi: Removed dead codeKim Lilliestierna XX2012-06-261-7/+4
| | | | | | | | Simplify logic and remove dead code. Signed-off-by: Kim Lilliestierna <kim.xx.lilliestierna@stericsson.com> Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Regression bug wherein VFs creation broken for multiple cards.Somnath Kotur2012-06-261-1/+2
| | | | | | | Fix be_find_vfs() to check for matching bus number as well along with devfn Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Explicitly clear the reserved field in the Tx DescriptorSomnath Kotur2012-06-261-0/+1
| | | | | Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-06-2626-159/+219
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/qmi_wwan.c net/batman-adv/translation-table.c net/ipv6/route.c qmi_wwan.c resolution provided by Bjørn Mork. batman-adv conflict is dealing merely with the changes of global function names to have a proper subsystem prefix. ipv6's route.c conflict is merely two side-by-side additions of network namespace methods. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sh_eth: fix the condition to fix the cur_tx/dirty_rxYoshihiro Shimoda2012-06-231-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit couldn't work if the RMCR is not set to 1. "net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens" commit id 79fba9f51755c704c0a7d7b7f0df10874dc0a744 If RMCR is not set, the controller will clear the EDRRR after it received a frame. In this case, the driver doesn't need to fix the value of cur_rx/dirty_rx. The driver only needs it when the controll detects receive descriptors are empty. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * r8169: RxConfig hack for the 8168evl.françois romieu2012-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 8168evl (RTL_GIGA_MAC_VER_34) based Gigabyte GA-990FXA motherboards are very prone to NETDEV watchdog problems without this change. See https://bugzilla.kernel.org/show_bug.cgi?id=42899 for instance. I don't know why it *works*. It's depressingly effective though. For the record: - the problem may go along IOMMU (AMD-Vi) errors but it really looks like a red herring. - the patch sets the RX_MULTI_EN bit. If the 8168c doc is any guide, the chipset now fetches several Rx descriptors at a time. - long ago the driver ignored the RX_MULTI_EN bit. e542a2269f232d61270ceddd42b73a4348dee2bb changed the RxConfig settings. Whatever the problem it's now labeled a regression. - Realtek's own driver can identify two different 8168evl devices (CFG_METHOD_16 and CFG_METHOD_17) where the r8169 driver only sees one. It sucks. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * usbnet: handle remote wakeup asapMing Lei2012-06-231-16/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If usbnet is resumed by remote wakeup, generally there are some packets comming to be handled, so allocate and submit rx URBs in usbnet_resume to avoid delays introduced by tasklet. Otherwise, usbnet may have been runtime suspended before the usbnet_bh is executed to schedule Rx URBs. Without the patch, usbnet can't recieve any packets from peer in runtime suspend state if runtime PM is enabled and autosuspend_delay is set as zero. Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * usbnet: decrease suspend count if returning -EBUSY for runtime suspendMing Lei2012-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | This patch decreases dev->suspend_count in the -EBUSY failure path of usbnet_suspend. Without the change, the later runtime suspend will do nothing except for increasing dev->suspend_count. Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * usbnet: clear OPEN flag in failure pathMing Lei2012-06-231-1/+3
| | | | | | | | | | | | | | | | | | | | Without clearing OPEN flag in failure path, runtime or system resume may submit interrupt/rx URB and start tx queue mistakenly on a interface in DOWN state. Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qmi_wwan: fix Gobi device probingBjørn Mork2012-06-231-43/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ignoring interfaces with additional descriptors is not a reliable method for locating the correct interface on Gobi devices. There is at least one device where this method fails: https://bbs.archlinux.org/viewtopic.php?id=143506 The result is that the AT command port (interface #2) is hidden from qcserial, preventing traditional serial modem usage: [ 15.562552] qmi_wwan 4-1.6:1.0: cdc-wdm0: USB WDM device [ 15.562691] qmi_wwan 4-1.6:1.0: wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.563383] qmi_wwan: probe of 4-1.6:1.1 failed with error -22 [ 15.564189] qmi_wwan 4-1.6:1.2: cdc-wdm1: USB WDM device [ 15.564302] qmi_wwan 4-1.6:1.2: wwan1: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.564328] qmi_wwan: probe of 4-1.6:1.3 failed with error -22 [ 15.569376] qcserial 4-1.6:1.1: Qualcomm USB modem converter detected [ 15.569440] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB0 [ 15.570372] qcserial 4-1.6:1.3: Qualcomm USB modem converter detected [ 15.570430] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB1 Use static interface numbers taken from the interface map in qcserial for all Gobi devices instead: Gobi 1K USB layout: 0: serial port (doesn't respond) 1: serial port (doesn't respond) 2: AT-capable modem port 3: QMI/net Gobi 2K+ USB layout: 0: QMI/net 1: DM/DIAG (use libqcdm from ModemManager for communication) 2: AT-capable modem port 3: NMEA This should be more reliable over all, and will also prevent the noisy "probe failed" messages. The whitelisting logic is expected to be replaced by direct interface number matching in 3.6. Reported-by: Heinrich Siebmanns (Harvey) <H.Siebmanns@t-online.de> Cc: <stable@vger.kernel.org> # v3.4: 0000188 USB: qmi_wwan: Make forced int 4 whitelist generic Cc: <stable@vger.kernel.org> # v3.4: f7142e6 USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z Cc: <stable@vger.kernel.org> # v3.4 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'master' of ↵John W. Linville2012-06-2212-45/+64
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| | * ath9k_htc: configure bssid on ASSOC/IBSS changeRajkumar Manoharan2012-06-201-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the change "mac80211: remove spurious BSSID change flag", BSS_CHANGED_BSSID will not be passed on association or IBSS status changes. So it could be better to program bssid on ASSOC or IBSS change notification. Not doing so, is affecting the packet transmission. Cc: stable@vger.kernel.org [3.4+] Reported-by: Michael Leun <lkml20120218@newton.leun.net> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * iwlwifi: remove log_event debugfs file debugging is disabledJohannes Berg2012-06-201-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When debugging is disabled, the event log functions aren't functional in the way that the debugfs file expects. This leads to the debugfs access crashing. Since the event log functions aren't functional then, remove the debugfs file when CONFIG_IWLWIFI_DEBUG is not set. Cc: stable@kernel.org Reported-by: Lekensteyn <lekensteyn@gmail.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k_hw: avoid possible infinite loop in ar9003_get_pll_sqsum_dvcMohammed Shafi Shajakhan2012-06-201-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "ath9k: Fix softlockup in AR9485" with commit id 64bc1239c790e051ff677e023435d770d2ffa174 fixed the reported issue, yet its better to avoid the possible infinite loop in ar9003_get_pll_sqsum_dvc by having a timeout as suggested by ath9k maintainers. http://www.spinics.net/lists/linux-wireless/msg92126.html. Based on my testing PLL's locking measurement is done in ~200us (2 iterations). Cc: stable@vger.kernel.org Cc: Rolf Offermanns <rolf.offermanns@gmx.net> Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * wl1251: Fix memory leaks in SPI initializationGrazvydas Ignotas2012-06-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes two memory leaks in the SPI initialization code. Patch based on old maemo patch by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * wl1251: always report beacon loss to the stackGrazvydas Ignotas2012-06-201-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Always report beacon loss to the stack, not only when in powersave state. This is because there's possibility that the driver disables PSM before it handles old BSS_LOSE_EVENT, so beacon loss has to be reported. Patch based on old maemo patch by: Janne Ylalehto <janne.ylalehto@nokia.com> Juuso Oikarinen <juuso.oikarinen@nokia.com> Luciano Coelho <luciano.coelho@nokia.com> Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * wl1251: fix TSF calculationGrazvydas Ignotas2012-06-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cast MSB part of current TSF to u64 to prevent loss of most significant bits. MSB should also be shifted by 32. Patch based on old maemo patch by: Yuri Kululin <ext-yuri.kululin@nokia.com> Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mwifiex: fix wrong return values in add_virtual_intf() error casesBing Zhao2012-06-191-14/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | add_virtual_intf() needs to return an ERR_PTR(), instead of NULL, on errors, otherwise cfg80211 will crash. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * airo: copying wrong data in airo_get_aplist()Dan Carpenter2012-06-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "qual" used to be declared on the stack, but then in 998a5a7d6a ("airo: reduce stack memory footprint") we made it dynamically allocated. Unfortunately the memcpy() here was missed and it's still copying stack memory instead of the data that we want. In other words, "&qual" should be "qual". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mwifiex: fix uAP TX packet timeout issueAvinash Patil2012-06-191-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running heavy traffic we stop the tx queue if the pending packet count reaches certain threshold. Later, the tx queue should be woken up as soon as the packet count falls below the threshold. Current code wakes TX queue up on STA interface only. Removing the check for STA interface will allow both STA and AP interfaces to resume transmit when tx_pending count becomes low. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath5k: remove _bh from inner locksBob Copeland2012-06-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spin_unlock_bh(&txq->lock) already disables softirqs so we don't want to do it here. Fixes smatch warnings: drivers/net/wireless/ath/ath5k/base.c:1048 ath5k_drain_tx_buffs() error: double lock 'bottom_half:' drivers/net/wireless/ath/ath5k/base.c:1056 ath5k_drain_tx_buffs() error: double unlock 'bottom_half:' Reported-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-21 19:19:46 +0100