| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| ... | |
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Commit ae5c6c6d "ptp: Classify ptp over ip over vlan packets" changed the
code in two drivers that matches time stamps with PTP frames, with the goal
of allowing VLAN tagged PTP packets to receive hardware time stamps.
However, that commit failed to account for the VLAN header when parsing
IPv4 packets. This patch fixes those two drivers to correctly match VLAN
tagged IPv4/UDP PTP messages with their time stamps.
This patch should also be applied to v3.17.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
* In LLD_MANAGED mode, traffic classes were being returned in reverse order to
lldp agent.
* Priotype of strict is no longer the default returned.
* Change behaviour of getdcbx() based on discussions on lldp-devel
These were missed as there was no working fetch interface for open-lldp when
running in LLD_MANAGED mode till now.
Fixes: 76bcb31efc06 ("cxgb4 : Add DCBx support codebase and dcbnl_ops")
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In case an interface has been brought down before entering S3, and then
brought up out of S3, all the initialization done during
bcmgenet_probe() by bcmgenet_mii_init() calling bcmgenet_mii_config() is
just lost since register contents are restored to their reset values.
Re-apply this configuration anytime we call bcmgenet_open() to make sure
our port multiplexer is properly configured to match the PHY interface.
Since we are now calling bcmgenet_mii_config() everytime bcmgenet_open()
is called, make sure we only print the message during initialization
time not to pollute the console.
Fixes: b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks")
Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
phy_disconnect() is the only way to guarantee that we are not going to
schedule more work on the PHY state machine workqueue for that
particular PHY device.
This fixes an issue where a network interface was suspended prior to a
system suspend/resume cycle and would then be resumed as part of
mdio_bus_resume(), since the GENET interface clocks would have been
disabled, this basically resulted in bus errors to appear since we are
invoking the GENET driver adjust_link() callback.
Fixes: b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch removes the dependency of the VENDOR entry and fixes
the QCA7000 one.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Status variable is never initialized, can carry an arbitrary value
on the stack and thus may let the function fail.
Fixes: e90dd2645664 ("ixgbe: Make return values more direct")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When advertised capabilities are changed with mii-tool, such as:
mii-tool -A 10baseT
the existing handler has two errors.
- An actual PHY register value is provided by mii-tool, and this
must be mapped to internal state with mii_adv_to_ethtool_adv_t().
- The PHY state machine needs to be told that autonegotiation has
again been performed. If not, the MAC will not be notified of
the new link speed and duplex, resulting in a possible config
mismatch.
Signed-off-by: Brian Hill <Brian@houston-radar.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In ppp_ioctl(), bpf_prog_create() is called inside ppp_lock, which
eventually calls vmalloc() and hits BUG_ON() in vmalloc.c. This patch
works around the problem by moving the allocation outside the lock.
The bug was revealed by the recent change in net/core/filter.c, as it
allocates via vmalloc() instead of kmalloc() now.
Reported-and-tested-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
tunnel is set
Currenly we only support Large-Send and TX checksum offloads for
encapsulated traffic of type VXLAN. We must make sure to advertize
these offloads up to the stack only when VXLAN tunnel is set.
Failing to do so, would mislead the the networking stack to assume
that the driver can offload the internal TX checksum for GRE packets
and other buggy schemes.
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Unlike CEE, IEEE has a bespoke app delete call and does not rely on priority
for app deletion
Fixes : 2376c879b80c ('cxgb4 : Improve handling of DCB negotiation or loss
thereof')
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When doing GRO processing for UDP tunnels, we never add
SKB_GSO_UDP_TUNNEL to gso_type - only the type of the inner protocol
is added (such as SKB_GSO_TCPV4). The result is that if the packet is
later resegmented we will do GSO but not treat it as a tunnel. This
results in UDP fragmentation of the outer header instead of (i.e.) TCP
segmentation of the inner header as was originally on the wire.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Congestion Threshold
Free List Starvation Threshold needs to be larger than the SGE's Egress
Congestion Threshold or we'll end up in a mutual stall where the driver waits
for Ingress Packets to drive replacing Free List Pointers and the SGE waits for
Free List Pointers before pushing Ingress Packets to the host.
Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
T5 introduces the ability to have separate Packing and Padding Boundaries
for SGE DMA transfers from the chip to Host Memory. This change set takes
advantage of that to set up a smaller Padding Boundary to conserve PCI Link
and Memory Bandwidth with T5.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Move fl_starv_thres into adapter->sge data structure since it
_could_ be different from adapter to adapter. Also move other per-adapter
SGE values which had been treated as driver globals into adapter->sge.
Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 3cc81d85ee01 ("asix: Don't reset PHY on if_up for ASIX 88772")
causes the ethernet on Arndale to no longer function. This appears to
be because the Arndale ethernet requires a full reset before it will
function correctly, however simply reverting the above patch causes
problems with ethtool settings getting reset.
It seems the problem is that the ethernet is not properly reset during
bind, and indeed the code in ax88772_bind that resets the device is a
very small subset of the actual ax88772_reset function. This patch uses
ax88772_reset in place of the existing reset code in ax88772_bind which
removes some code duplication and fixes the ethernet on Arndale.
It is still possible that the original patch causes some issues with
suspend and resume but that seems like a separate issue and I haven't
had a chance to test that yet.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 1b7bde6d659d ("net: fec: implement rx_copybreak to improve rx performance")
introduced a regression for i.MX28. The swap_buffer() function doing
the endian conversion of the received data on i.MX28 may access memory
beyond the actual packet size in the DMA buffer. fec_enet_copybreak()
does not copy those bytes, so that the last bytes of a packet may be
filled with invalid data after swapping.
This will likely lead to checksum errors on received packets.
E.g. when trying to mount an NFS rootfs:
UDP: bad checksum. From 192.168.1.225:111 to 192.168.100.73:44662 ulen 36
Do the byte swapping and copying to the new skb in one go if
necessary.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| |\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:
====================
pull request: wireless 2014-11-06
Please pull this batch of fixes intended for the 3.18 stream...
For the mac80211 bits, Johannes says:
"This contains another small set of fixes for 3.18, these are all
over the place and most of the bugs are old, one even dates back
to the original mac80211 we merged into the kernel."
For the iwlwifi bits, Emmanuel says:
"I fix here two issues that are related to the firmware
loading flow. A user reported that he couldn't load the
driver because the rfkill line was pulled up while we
were running the calibrations. This was happening while
booting the system: systemd was restoring the "disable
wifi settings" and that raised an RFKILL interrupt during
the calibration. Our driver didn't handle that properly
and this is now fixed."
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg <johannes@sipsolutions.net> says:
"This contains another small set of fixes for 3.18, these are all
over the place and most of the bugs are old, one even dates back
to the original mac80211 we merged into the kernel."
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The driver is not released when ieee80211_register_hw fails in
mac80211_hwsim_create_radio, leading to the access to the unregistered (and
possibly freed) device in platform_driver_unregister:
[ 0.447547] mac80211_hwsim: ieee80211_register_hw failed (-2)
[ 0.448292] ------------[ cut here ]------------
[ 0.448854] WARNING: CPU: 0 PID: 1 at ../include/linux/kref.h:47 kobject_get+0x33/0x50()
[ 0.449839] CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-00001-gdd46990-dirty #2
[ 0.450813] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.451512] 00000000 00000000 78025e38 7967c6c6 78025e68 7905e09b 7988b480 00000000
[ 0.452579] 00000001 79887d62 0000002f 79170bb3 79170bb3 78397008 79ac9d74 00000001
[ 0.453614] 78025e78 7905e15d 00000009 00000000 78025e84 79170bb3 78397000 78025e8c
[ 0.454632] Call Trace:
[ 0.454921] [<7967c6c6>] dump_stack+0x16/0x18
[ 0.455453] [<7905e09b>] warn_slowpath_common+0x6b/0x90
[ 0.456067] [<79170bb3>] ? kobject_get+0x33/0x50
[ 0.456612] [<79170bb3>] ? kobject_get+0x33/0x50
[ 0.457155] [<7905e15d>] warn_slowpath_null+0x1d/0x20
[ 0.457748] [<79170bb3>] kobject_get+0x33/0x50
[ 0.458274] [<7925824f>] get_device+0xf/0x20
[ 0.458779] [<7925b5cd>] driver_detach+0x3d/0xa0
[ 0.459331] [<7925a3ff>] bus_remove_driver+0x8f/0xb0
[ 0.459927] [<7925bf80>] ? class_unregister+0x40/0x80
[ 0.460660] [<7925bad7>] driver_unregister+0x47/0x50
[ 0.461248] [<7925c033>] ? class_destroy+0x13/0x20
[ 0.461824] [<7925d07b>] platform_driver_unregister+0xb/0x10
[ 0.462507] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9
[ 0.463161] [<79b30c58>] do_one_initcall+0x106/0x1a9
[ 0.463758] [<79b517b8>] ? if_spi_init_module+0xac/0xac
[ 0.464393] [<79b517b8>] ? if_spi_init_module+0xac/0xac
[ 0.465001] [<79071935>] ? parse_args+0x2f5/0x480
[ 0.465569] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50
[ 0.466345] [<79b30dd9>] kernel_init_freeable+0xde/0x17d
[ 0.466972] [<79b304d6>] ? do_early_param+0x7a/0x7a
[ 0.467546] [<79677b1b>] kernel_init+0xb/0xe0
[ 0.468072] [<79075f42>] ? schedule_tail+0x12/0x40
[ 0.468658] [<79686580>] ret_from_kernel_thread+0x20/0x30
[ 0.469303] [<79677b10>] ? rest_init+0xc0/0xc0
[ 0.469829] ---[ end trace ad8ac403ff8aef5c ]---
[ 0.470509] ------------[ cut here ]------------
[ 0.471047] WARNING: CPU: 0 PID: 1 at ../kernel/locking/lockdep.c:3161 __lock_acquire.isra.22+0x7aa/0xb00()
[ 0.472163] DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS)
[ 0.472774] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2
[ 0.473815] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.474492] 78025de0 78025de0 78025da0 7967c6c6 78025dd0 7905e09b 79888931 78025dfc
[ 0.475515] 00000001 79888a93 00000c59 7907f33a 7907f33a 78028000 fffe9d09 00000000
[ 0.476519] 78025de8 7905e10e 00000009 78025de0 79888931 78025dfc 78025e24 7907f33a
[ 0.477523] Call Trace:
[ 0.477821] [<7967c6c6>] dump_stack+0x16/0x18
[ 0.478352] [<7905e09b>] warn_slowpath_common+0x6b/0x90
[ 0.478976] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00
[ 0.479658] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00
[ 0.480417] [<7905e10e>] warn_slowpath_fmt+0x2e/0x30
[ 0.480479] [<7907f33a>] __lock_acquire.isra.22+0x7aa/0xb00
[ 0.480479] [<79078aa5>] ? sched_clock_cpu+0xb5/0xf0
[ 0.480479] [<7907fd06>] lock_acquire+0x56/0x70
[ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0
[ 0.480479] [<79682d11>] mutex_lock_nested+0x61/0x2a0
[ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0
[ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0
[ 0.480479] [<7925b5e8>] driver_detach+0x58/0xa0
[ 0.480479] [<7925a3ff>] bus_remove_driver+0x8f/0xb0
[ 0.480479] [<7925bf80>] ? class_unregister+0x40/0x80
[ 0.480479] [<7925bad7>] driver_unregister+0x47/0x50
[ 0.480479] [<7925c033>] ? class_destroy+0x13/0x20
[ 0.480479] [<7925d07b>] platform_driver_unregister+0xb/0x10
[ 0.480479] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9
[ 0.480479] [<79b30c58>] do_one_initcall+0x106/0x1a9
[ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac
[ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac
[ 0.480479] [<79071935>] ? parse_args+0x2f5/0x480
[ 0.480479] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50
[ 0.480479] [<79b30dd9>] kernel_init_freeable+0xde/0x17d
[ 0.480479] [<79b304d6>] ? do_early_param+0x7a/0x7a
[ 0.480479] [<79677b1b>] kernel_init+0xb/0xe0
[ 0.480479] [<79075f42>] ? schedule_tail+0x12/0x40
[ 0.480479] [<79686580>] ret_from_kernel_thread+0x20/0x30
[ 0.480479] [<79677b10>] ? rest_init+0xc0/0xc0
[ 0.480479] ---[ end trace ad8ac403ff8aef5d ]---
[ 0.495478] BUG: unable to handle kernel paging request at 00200200
[ 0.496257] IP: [<79682de5>] mutex_lock_nested+0x135/0x2a0
[ 0.496923] *pde = 00000000
[ 0.497290] Oops: 0002 [#1]
[ 0.497653] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2
[ 0.498659] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.499321] task: 78028000 ti: 78024000 task.ti: 78024000
[ 0.499955] EIP: 0060:[<79682de5>] EFLAGS: 00010097 CPU: 0
[ 0.500620] EIP is at mutex_lock_nested+0x135/0x2a0
[ 0.501145] EAX: 00200200 EBX: 78397434 ECX: 78397460 EDX: 78025e70
[ 0.501816] ESI: 00000246 EDI: 78028000 EBP: 78025e8c ESP: 78025e54
[ 0.502497] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.503076] CR0: 8005003b CR2: 00200200 CR3: 01b9d000 CR4: 00000690
[ 0.503773] Stack:
[ 0.503998] 00000000 00000001 00000000 7925b5e8 78397460 7925b5e8 78397474 78397460
[ 0.504944] 00200200 11111111 78025e70 78397000 79ac9d74 00000001 78025ea0 7925b5e8
[ 0.505451] 79ac9d74 fffffffe 00000001 78025ebc 7925a3ff 7a251398 78025ec8 7925bf80
[ 0.505451] Call Trace:
[ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0
[ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0
[ 0.505451] [<7925b5e8>] driver_detach+0x58/0xa0
[ 0.505451] [<7925a3ff>] bus_remove_driver+0x8f/0xb0
[ 0.505451] [<7925bf80>] ? class_unregister+0x40/0x80
[ 0.505451] [<7925bad7>] driver_unregister+0x47/0x50
[ 0.505451] [<7925c033>] ? class_destroy+0x13/0x20
[ 0.505451] [<7925d07b>] platform_driver_unregister+0xb/0x10
[ 0.505451] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9
[ 0.505451] [<79b30c58>] do_one_initcall+0x106/0x1a9
[ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac
[ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac
[ 0.505451] [<79071935>] ? parse_args+0x2f5/0x480
[ 0.505451] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50
[ 0.505451] [<79b30dd9>] kernel_init_freeable+0xde/0x17d
[ 0.505451] [<79b304d6>] ? do_early_param+0x7a/0x7a
[ 0.505451] [<79677b1b>] kernel_init+0xb/0xe0
[ 0.505451] [<79075f42>] ? schedule_tail+0x12/0x40
[ 0.505451] [<79686580>] ret_from_kernel_thread+0x20/0x30
[ 0.505451] [<79677b10>] ? rest_init+0xc0/0xc0
[ 0.505451] Code: 89 d8 e8 cf 9b 9f ff 8b 4f 04 8d 55 e4 89 d8 e8 72 9d 9f ff 8d 43 2c 89 c1 89 45 d8 8b 43 30 8d 55 e4 89 53 30 89 4d e4 89 45 e8 <89> 10 8b 55 dc 8b 45 e0 89 7d ec e8 db af 9f ff eb 11 90 31 c0
[ 0.505451] EIP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 SS:ESP 0068:78025e54
[ 0.505451] CR2: 0000000000200200
[ 0.505451] ---[ end trace ad8ac403ff8aef5e ]---
[ 0.505451] Kernel panic - not syncing: Fatal exception
Fixes: 9ea927748ced ("mac80211_hwsim: Register and bind to driver")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Junjie Mao <eternal.n08@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
| | |\ \ \
| | | |/
| | |/|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
Emmanuel Grumbach <egrumbach@gmail.com> says:
"I fix here two issues that are related to the firmware
loading flow. A user reported that he couldn't load the
driver because the rfkill line was pulled up while we
were running the calibrations. This was happening while
booting the system: systemd was restoring the "disable
wifi settings" and that raised an RFKILL interrupt during
the calibration. Our driver didn't handle that properly
and this is now fixed."
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
If the RFkill interrupt fires while we calibrate, it would
make the firmware fail and the driver wasn't able to recover.
Change the flow so that the driver will kill the firmware
in that case.
Since we have now two flows that are calling
trans_stop_device (the RFkill interrupt and the
op_mode_mvm_start function) - we need to better sync this.
Use the STATUS_DEVICE_ENABLED in the pcie transport in an
atomic way to achieve this.
This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=86231
CC: <stable@vger.kernel.org> [3.10+]
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
mvm->cur_ucode wasn't set before we actually load the
firmware. This caused issues when we boot in RFKILL since
we get an RFKILL interrupt upon boot even before we load
any firmware.
This leads to issues since iwl_mvm_set_hw_rfkill_state
(the RFKILL interrupts handler in mvm) relies on this
variable.
Fix this.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
o Poll for the link events only if firmware doesn't have capability
to notify the driver for the link events.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
When we reuse the rx buffer, we need to update the desc. If not hardware sees
stale value.
In the following crash, when mtu is changed, hardware sees old rx buffer value
and crashes on skb_put.
Fix this by using enic_queue_rq_desc helper function which updates the necessary
desc.
[ 64.657376] skbuff: skb_over_panic: text:ffffffffa041f55d len:9010 put:9010 head:ffff8800d3ca9fc0 data:ffff8800d3caa000 tail:0x2372 end:0x640 dev:enp0s3
[ 64.659965] ------------[ cut here ]------------
[ 64.661322] kernel BUG at net/core/skbuff.c:100!
[ 64.662644] invalid opcode: 0000 [#1] PREEMPT SMP
[ 64.664001] Modules linked in: rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 cirrus ttm drm_kms_helper drm enic psmouse microcode evdev serio_raw syscopyarea sysfillrect sysimgblt i2c_piix4 i2c_core pcspkr nfs lockd grace sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod ata_generic virtio_balloon ata_piix libata uhci_hcd virtio_pci virtio_ring usbcore usb_common virtio scsi_mod
[ 64.664834] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-netnext-10335-g942396b-dirty #273
[ 64.664834] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 64.664834] task: ffffffff81a1d580 ti: ffffffff81a00000 task.ti: ffffffff81a00000
[ 64.664834] RIP: 0010:[<ffffffff81392cf1>] [<ffffffff81392cf1>] skb_panic+0x61/0x70
[ 64.664834] RSP: 0018:ffff880210603d48 EFLAGS: 00010292
[ 64.664834] RAX: 000000000000008c RBX: ffff88020b0f6930 RCX: 0000000000000000
[ 64.664834] RDX: 000000000000008c RSI: ffffffff8178b288 RDI: 00000000ffffffff
[ 64.664834] RBP: ffff880210603d68 R08: 0000000000000001 R09: 0000000000000001
[ 64.664834] R10: 00000000000005ce R11: 0000000000000001 R12: ffff88020b1f0b40
[ 64.664834] R13: 000000000000a332 R14: ffff880209a1a000 R15: 0000000000000001
[ 64.664834] FS: 0000000000000000(0000) GS:ffff880210600000(0000) knlGS:0000000000000000
[ 64.664834] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 64.664834] CR2: 00007f6752935e48 CR3: 0000000035743000 CR4: 00000000000006f0
[ 64.664834] Stack:
[ 64.664834] ffff8800d3caa000 0000000000002372 0000000000000640 ffff88020b1f0000
[ 64.664834] ffff880210603d78 ffffffff81392d54 ffff880210603e08 ffffffffa041f55d
[ 64.664834] 0000000000000296 ffffffff00000000 00008e7e00008e7e ffff880200002332
[ 64.664834] Call Trace:
[ 64.664834] <IRQ>
[ 64.664834]
[ 64.664834] [<ffffffff81392d54>] skb_put+0x54/0x60
[ 64.664834] [<ffffffffa041f55d>] enic_rq_service.constprop.47+0x3ad/0x730 [enic]
[ 64.664834] [<ffffffffa041fa79>] enic_poll_msix_rq+0x199/0x370 [enic]
[ 64.664834] [<ffffffff813a5499>] net_rx_action+0x139/0x210
[ 64.664834] [<ffffffff81290db3>] ? __this_cpu_preempt_check+0x13/0x20
[ 64.664834] [<ffffffff8106110e>] __do_softirq+0x14e/0x280
[ 64.664834] [<ffffffff8106152e>] irq_exit+0x8e/0xb0
[ 64.664834] [<ffffffff8100fd21>] do_IRQ+0x61/0x100
[ 64.664834] [<ffffffff814a2bf2>] common_interrupt+0x72/0x72
fixes: a03bb56e67c357980dae886683733dab5583dc14 ("enic: implement rx_copybreak")
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
In case of error in rx path, we free the buf->os_buf but we do not make it NULL.
In next iteration we use the skb which is already freed. This causes the
following crash.
[ 886.154772] general protection fault: 0000 [#1] PREEMPT SMP
[ 886.154851] Modules linked in: rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 microcode evdev cirrus ttm drm_kms_helper drm enic syscopyarea sysfillrect sysimgblt psmouse i2c_piix4 serio_raw pcspkr i2c_core nfs lockd grace sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common ata_generic ata_piix virtio_balloon libata scsi_mod uhci_hcd usbcore virtio_pci virtio_ring virtio usb_common
[ 886.155199] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-netnext-05668-g876bc7f #272
[ 886.155263] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 886.155304] task: ffffffff81a1d580 ti: ffffffff81a00000 task.ti: ffffffff81a00000
[ 886.155356] RIP: 0010:[<ffffffff81384030>] [<ffffffff81384030>] kfree_skb_list+0x10/0x30
[ 886.155418] RSP: 0018:ffff880210603d48 EFLAGS: 00010206
[ 886.155456] RAX: 0000000000000020 RBX: 0000000000000000 RCX: 0000000000000000
[ 886.155504] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 004500084e000017
[ 886.155553] RBP: ffff880210603d50 R08: 00000000fe13d1b6 R09: 0000000000000001
[ 886.155601] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880209ff2f00
[ 886.155650] R13: ffff88020ac0fe40 R14: ffff880209ff2f00 R15: ffff8800da8e3a80
[ 886.155699] FS: 0000000000000000(0000) GS:ffff880210600000(0000) knlGS:0000000000000000
[ 886.155774] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 886.155814] CR2: 00007f0e0c925000 CR3: 0000000035e8b000 CR4: 00000000000006f0
[ 886.155865] Stack:
[ 886.155882] 0000000000000000 ffff880210603d78 ffffffff81383f79 ffff880209ff2f00
[ 886.155942] ffff88020b0c0b40 000000000000c000 ffff880210603d90 ffffffff81383faf
[ 886.156001] ffff880209ff2f00 ffff880210603da8 ffffffff8138406d ffff88020b1b08c0
[ 886.156061] Call Trace:
[ 886.156080] <IRQ>
[ 886.156095]
[ 886.156112] [<ffffffff81383f79>] skb_release_data+0xa9/0xc0
[ 886.157656] [<ffffffff81383faf>] skb_release_all+0x1f/0x30
[ 886.159195] [<ffffffff8138406d>] consume_skb+0x1d/0x40
[ 886.160719] [<ffffffff813942e5>] __dev_kfree_skb_any+0x35/0x40
[ 886.162224] [<ffffffffa02dc1d5>] enic_rq_service.constprop.47+0xe5/0x5a0 [enic]
[ 886.163756] [<ffffffffa02dc829>] enic_poll_msix_rq+0x199/0x370 [enic]
[ 886.164730] [<ffffffff81397e29>] net_rx_action+0x139/0x210
[ 886.164730] [<ffffffff8105fb2e>] __do_softirq+0x14e/0x280
[ 886.164730] [<ffffffff8105ff2e>] irq_exit+0x8e/0xb0
[ 886.164730] [<ffffffff8100fc1d>] do_IRQ+0x5d/0x100
[ 886.164730] [<ffffffff81496832>] common_interrupt+0x72/0x72
fixes: a03bb56e67c357980dae886683733dab5583dc14 ("enic: implement rx_copybreak")
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
When events arrive at driver load, the event handler gets called even before
the spinlock and list are initialized. Fix this by moving the initialization
before EQs creation.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
After the EQ is created, it can possibly generate interrupts and the interrupt
handler is referencing eq->dev. It is therefore required to set eq->dev before
calling request_irq() so if an event is generated before request_irq() returns,
we will have a valid eq->dev field.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
when cpsw is build as modulea and simple insert and removal of module
creates a deadlock, due to delete timer. the timer is created and destroyed
in cpsw_ale_start and cpsw_ale_stop which are from device open and close.
root@am437x-evm:~# modprobe -r ti_cpsw
[ 158.505333] INFO: trying to register non-static key.
[ 158.510623] the code is fine but needs lockdep annotation.
[ 158.516448] turning off the locking correctness validator.
[ 158.522282] CPU: 0 PID: 1339 Comm: modprobe Not tainted 3.14.23-00445-gd41c88f #44
[ 158.530359] [<c0015380>] (unwind_backtrace) from [<c0012088>] (show_stack+0x10/0x14)
[ 158.538603] [<c0012088>] (show_stack) from [<c054ad70>] (dump_stack+0x78/0x94)
[ 158.546295] [<c054ad70>] (dump_stack) from [<c0088008>] (__lock_acquire+0x176c/0x1b74)
[ 158.554711] [<c0088008>] (__lock_acquire) from [<c0088944>] (lock_acquire+0x9c/0x104)
[ 158.563043] [<c0088944>] (lock_acquire) from [<c004e520>] (del_timer_sync+0x44/0xd8)
[ 158.571289] [<c004e520>] (del_timer_sync) from [<bf2eac1c>] (cpsw_ale_destroy+0x10/0x3c [ti_cpsw])
[ 158.580821] [<bf2eac1c>] (cpsw_ale_destroy [ti_cpsw]) from [<bf2eb268>] (cpsw_remove+0x30/0xa0 [ti_cpsw])
[ 158.591000] [<bf2eb268>] (cpsw_remove [ti_cpsw]) from [<c035ef44>] (platform_drv_remove+0x18/0x1c)
[ 158.600527] [<c035ef44>] (platform_drv_remove) from [<c035d8bc>] (__device_release_driver+0x70/0xc8)
[ 158.610236] [<c035d8bc>] (__device_release_driver) from [<c035e0d4>] (driver_detach+0xb4/0xb8)
[ 158.619386] [<c035e0d4>] (driver_detach) from [<c035d6e4>] (bus_remove_driver+0x4c/0x90)
[ 158.627988] [<c035d6e4>] (bus_remove_driver) from [<c00af2a8>] (SyS_delete_module+0x10c/0x198)
[ 158.637144] [<c00af2a8>] (SyS_delete_module) from [<c000e580>] (ret_fast_syscall+0x0/0x48)
[ 179.524727] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=2102 jiffies, g=1487, c=1486, q=6)
[ 179.535741] INFO: Stall ended before state dump start
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
ATM, txq_reclaim will dequeue and free an skb for each tx desc released
by the hw that has TX_LAST_DESC set. However, in case of TSO, each
hw desc embedding the last part of a segment has TX_LAST_DESC set,
losing the one-to-one 'last skb frag'/'TX_LAST_DESC set' correspondance,
which causes data corruption.
Fix this by checking TX_ENABLE_INTERRUPT instead of TX_LAST_DESC, and
warn when trying to dequeue from an empty txq (which can be symptomatic
of releasing skbs prematurely).
Fixes: 3ae8f4e0b98 ('net: mv643xx_eth: Implement software TSO')
Reported-by: Slawomir Gajzner <slawomir.gajzner@gmail.com>
Reported-by: Julien D'Ascenzio <jdascenzio@yahoo.fr>
Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This patch is to fix the atomicity when suspend and resume the
driver. The clk api have been changed (as reported by Hao Liang)
and the skb allocation is done out of the hw setup function and
taking care about the GFP flags.
Reported-by: Hao Liang <hliang1025@gmail.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Hao Liang <hliang1025@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This patch aims to fix the concurrency in eee initialization
inside the stmmac driver and related warnings when enable
DEBUG_ATOMIC_SLEEP.
Prior this patch, the stmmac_eee_init could be called in several places
as shown below:
stmmac_open stmmac_resume PHY Layer
| | |
stmmac_hw_setup stmmac_adjust_link
| | stmmac ethtool
|__________________________|______________|
|
stmmac_eee_init
The patch removes the stmmac_eee_init call inside the stmmac_hw_setup
that is unnecessary. It is sufficient to call it in the adjust_link to
always guarantee that EEE is always configured at mac level too.
Fixing the lock protection now it is covered another case (not
considered before). The stmmac_eee_init could be called by the ethtool
so critical sections must be protected inside this function too.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
When compile with CONFIG_PROVE_LOCKING the following warnings happen:
[snip]
HARDIRQ-ON-W at:
[<c0480c1c>] _raw_spin_lock+0x3c/0x4c
[<c02c2828>] stmmac_set_rx_mode+0x18/0x3c
[<c038b2cc>] dev_set_rx_mode+0x1c/0x28
[<c038b38c>] __dev_open+0xb4/0xf8
[<c038b5a8>] __dev_change_flags+0x94/0x128
[<c038b6a8>] dev_change_flags+0x10/0x48
[<c062afe0>] ip_auto_config+0x1d4/0x1084
[<c000873c>] do_one_initcall+0x108/0x15c
[<c060ec50>] kernel_init_freeable+0x1a8/0x248
[<c0472cc0>] kernel_init+0x8/0x160
[<c000dfc8>] ret_from_fork+0x14/0x2c
INITIAL USE at:
[<c0480c1c>] _raw_spin_lock+0x3c/0x4c
[<c02c2828>] stmmac_set_rx_mode+0x18/0x3c
[<c038b2cc>] dev_set_rx_mode+0x1c/0x28
[<c038b38c>] __dev_open+0xb4/0xf8
[<c038b5a8>] __dev_change_flags+0x94/0x128
[<c038b6a8>] dev_change_flags+0x10/0x48
[<c062afe0>] ip_auto_config+0x1d4/0x1084
[<c000873c>] do_one_initcall+0x108/0x15c
[<c060ec50>] kernel_init_freeable+0x1a8/0x248
[<c0472cc0>] kernel_init+0x8/0x160
[<c000dfc8>] ret_from_fork+0x14/0x2c
so the patch just removes the lock protection in the stmmac_set_rx_mode
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Emilio Lopez <emilio@elopez.com.ar>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Add missing spin_unlock when tx frames gets dropped.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
stmmac_tx_avail() may lie if used unprotected. It's using cur_tx
and dirty_tx index. These index may be already in use by tx_clean
when entering xmit routine. So, this should be called locked.
This can cause transmit queue to be stuck, with following message:
NETDEV WATCHDOG: eth0 (stmmaceth): transmit queue 0 timed out
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
"1db3ddff1602edf2390b7667dcbaa0f71512e3ea"
Microblaze is a fpga soft core, it can be customized easily, which may
cause many various hardware version strings.
So the original fix patch based on hard-coded compatible version strings
is not a good idea (although it is correct for current issue). For it,
there will be a new solving way soon (which based on the device tree).
The original issue is related with qemu, so can only change the hardware
version string in qemu for it, then keep the original driver no touch (
qemu is for virtualization which has much easier life than real world).
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This patch fixes the following kernel crash during SGMII based 1GbE probe.
BUG: Bad page state in process swapper/0 pfn:40fe6ad
page:ffffffbee37a75d8 count:-1 mapcount:0 mapping: (null) index:0x0
flags: 0x0()
page dumped because: nonzero _count
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0+ #7
Call trace:
[<ffffffc000087fa0>] dump_backtrace+0x0/0x12c
[<ffffffc0000880dc>] show_stack+0x10/0x1c
[<ffffffc0004d981c>] dump_stack+0x74/0xc4
[<ffffffc00012fe70>] bad_page+0xd8/0x128
[<ffffffc000133000>] get_page_from_freelist+0x4b8/0x640
[<ffffffc000133260>] __alloc_pages_nodemask+0xd8/0x834
[<ffffffc0004194f8>] __netdev_alloc_frag+0x124/0x1b8
[<ffffffc00041bfdc>] __netdev_alloc_skb+0x90/0x10c
[<ffffffc00039ff30>] xgene_enet_refill_bufpool+0x11c/0x280
[<ffffffc0003a11a4>] xgene_enet_process_ring+0x168/0x340
[<ffffffc0003a1498>] xgene_enet_napi+0x1c/0x50
[<ffffffc00042b454>] net_rx_action+0xc8/0x18c
[<ffffffc0000b0880>] __do_softirq+0x114/0x24c
[<ffffffc0000b0c34>] irq_exit+0x94/0xc8
[<ffffffc0000e68a0>] __handle_domain_irq+0x8c/0xf4
[<ffffffc000081288>] gic_handle_irq+0x30/0x7c
This was due to hardware resource sharing conflict with the firmware. This
patch fixes this crash by using resources (descriptor ring, prefetch buffer)
that are not shared.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This patch adds support when used with older firmware (<= 1.13.28).
- Added xgene_ring_mgr_init() to check whether ring manager is initialized
- Calling xgene_ring_mgr_init() from xgene_port_ops.reset()
- To handle errors, changed the return type of xgene_port_ops.reset()
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
efx_ef10_probe() was BUGging out if the BAR2 size was 0. This is
unnecessarily violent; instead we should just fail to probe the device.
Kept a WARN_ON as this problem indicates a broken or misconfigured NIC.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
When VLAN is in use in macvtap_put_user, we end up setting
csum_start to the wrong place. The result is that the whoever
ends up doing the checksum setting will corrupt the packet instead
of writing the checksum to the expected location, usually this
means writing the checksum with an offset of -4.
This patch fixes this by adjusting csum_start when VLAN tags are
detected.
Fixes: f09e2249c4f5 ("macvtap: restore vlan header on user read")
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cheers,
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
On i.MX6SX sdb platform, there has two same enet MACs, after system up,
just eth0 is up, and then do suspend/resume test:
[ 50.437967] PM: Syncing filesystems ... done.
[ 50.476924] Freezing user space processes ... (elapsed 0.005 seconds) done.
[ 50.490093] Freezing remaining freezable tasks ... (elapsed 0.004 seconds) done.
[ 50.559771] ------------[ cut here ]------------
[ 50.564453] WARNING: CPU: 0 PID: 575 at drivers/clk/clk.c:851 __clk_disable+0x60/0x6c()
[ 50.572475] Modules linked in:
[ 50.575578] CPU: 0 PID: 575 Comm: sh Not tainted 3.18.0-rc2-next-20141031-00007-gf61135b #21
[ 50.584031] Backtrace:
[ 50.586550] [<80011ecc>] (dump_backtrace) from [<8001206c>] (show_stack+0x18/0x1c)
[ 50.594136] r6:808a7a54 r5:00000000 r4:00000000 r3:00000000
[ 50.599920] [<80012054>] (show_stack) from [<806ab3c0>] (dump_stack+0x80/0x9c)
[ 50.607187] [<806ab340>] (dump_stack) from [<8002a3e8>] (warn_slowpath_common+0x6c/0x8c)
[ 50.615294] r5:00000353 r4:00000000
[ 50.618940] [<8002a37c>] (warn_slowpath_common) from [<8002a42c>] (warn_slowpath_null+0x24/0x2c)
[ 50.627738] r8:00000000 r7:be144c44 r6:be015600 r5:80070013 r4:be015600
[ 50.634573] [<8002a408>] (warn_slowpath_null) from [<804f8d4c>] (__clk_disable+0x60/0x6c)
[ 50.642777] [<804f8cec>] (__clk_disable) from [<804f8e5c>] (clk_disable+0x2c/0x38)
[ 50.650359] r4:be015600 r3:00000000
[ 50.654006] [<804f8e30>] (clk_disable) from [<80420ab4>] (fec_enet_clk_enable+0xc4/0x258)
[ 50.662196] r5:be3cb620 r4:be3cb000
[ 50.665838] [<804209f0>] (fec_enet_clk_enable) from [<80421178>] (fec_suspend+0x30/0x180)
[ 50.674026] r7:be144c44 r6:be144c10 r5:8037f5a4 r4:be3cb000
[ 50.679802] [<80421148>] (fec_suspend) from [<8037f5d8>] (platform_pm_suspend+0x34/0x64)
[ 50.687906] r10:00000000 r9:00000000 r8:00000000 r7:be144c44 r6:be144c10 r5:8037f5a4
[ 50.695852] r4:be144c10 r3:80421148
[ 50.699511] [<8037f5a4>] (platform_pm_suspend) from [<8038784c>] (dpm_run_callback.isra.14+0x34/0x6c)
[ 50.708764] [<80387818>] (dpm_run_callback.isra.14) from [<80387f00>] (__device_suspend+0x12c/0x2a4)
[ 50.717909] r9:8098ec8c r8:80973bec r6:00000002 r5:811c7038 r4:be144c10
[ 50.724746] [<80387dd4>] (__device_suspend) from [<803894fc>] (dpm_suspend+0x64/0x224)
[ 50.732675] r8:80973bec r7:be144c10 r6:8098ec24 r5:811c7038 r4:be144cc4
[ 50.739509] [<80389498>] (dpm_suspend) from [<8038999c>] (dpm_suspend_start+0x60/0x68)
[ 50.747438] r10:8082fa24 r9:00000000 r8:00000004 r7:00000003 r6:00000000 r5:8116ec80
[ 50.755386] r4:00000002
[ 50.757969] [<8038993c>] (dpm_suspend_start) from [<800679d8>] (suspend_devices_and_enter+0x90/0x3ec)
[ 50.767202] r4:00000003 r3:8116eca0
[ 50.770843] [<80067948>] (suspend_devices_and_enter) from [<80067f40>] (pm_suspend+0x20c/0x2a4)
[ 50.779553] r8:00000004 r7:00000003 r6:00000000 r5:8116ec8c r4:00000003
[ 50.786394] [<80067d34>] (pm_suspend) from [<80066858>] (state_store+0x70/0xc0)
[ 50.793718] r6:8116ec90 r5:00000003 r4:bd88a800 r3:0000006d
[ 50.799496] [<800667e8>] (state_store) from [<802b0384>] (kobj_attr_store+0x1c/0x28)
[ 50.807251] r10:bd399f78 r8:00000000 r7:bd88a800 r6:bd88a800 r5:00000004 r4:bd085680
[ 50.815219] [<802b0368>] (kobj_attr_store) from [<80153090>] (sysfs_kf_write+0x54/0x58)
[ 50.823252] [<8015303c>] (sysfs_kf_write) from [<80151fd8>] (kernfs_fop_write+0xd0/0x194)
[ 50.831441] r6:00000004 r5:bd08568c r4:bd085680 r3:8015303c
[ 50.837220] [<80151f08>] (kernfs_fop_write) from [<800eddb4>] (vfs_write+0xb8/0x1a8)
[ 50.844975] r10:00000000 r9:00000000 r8:00000000 r7:bd399f78 r6:01336408 r5:00000004
[ 50.852924] r4:bc584dc0
[ 50.855505] [<800edcfc>] (vfs_write) from [<800ee0b8>] (SyS_write+0x48/0x88)
[ 50.862567] r10:00000000 r8:00000000 r7:01336408 r6:00000004 r5:bc584dc0 r4:bc584dc0
[ 50.870537] [<800ee070>] (SyS_write) from [<8000eb00>] (ret_fast_syscall+0x0/0x48)
[ 50.878120] r9:bd398000 r8:8000ecc4 r7:00000004 r6:76f42b48 r5:01336408 r4:00000004
[ 50.885983] ---[ end trace 7545115d752a316a ]---
[ 50.890765] ------------[ cut here ]------------
The root cause is that eth1 is not opened and clock is not enabled, and .suspend() still
call .fec_enet_clk_enable() to disable clock.
To avoid the broken, let it check network device up status by calling .netif_running()
before disable/enable clocks.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
We set the flag TUN_PKT_STRIP if the user buffer provided is too
small to contain the entire packet plus meta-data. However, this
has been broken ever since we added GSO meta-data. VLAN acceleration
also has the same problem.
This patch fixes this by taking both into account when setting the
TUN_PKT_STRIP flag.
The fact that this has been broken for six years without anyone
realising means that nobody actually uses this flag.
Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
When VLAN acceleration is in use on the xmit path, we end up
setting csum_start to the wrong place. The result is that the
whoever ends up doing the checksum setting will corrupt the packet
instead of writing the checksum to the expected location, usually
this means writing the checksum with an offset of -4.
This patch fixes this by adjusting csum_start when VLAN acceleration
is detected.
Fixes: 6680ec68eff4 ("tuntap: hardware vlan tx support")
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The SMC91x is written to explicitly look up the IRQ resource
from the platform device and extract the IRQ and flags, however
the platform_get_irq() does additional things, like call
of_irq_get() in the device tree case, which will translate
the IRQ using the irqdomain and defer the probe if the
IRQ host cannot be found.
As we're not looking up the resource, this will not retrieve
the IRQ flags, but that is better done using
irqd_get_trigger_type(), as the trigger is what the driver
wants to modify. We take care to preserve the semantics that
will make the trigger type provided from the resource
override any local specifier.
Tested on the Nomadik NHK15 which has its SMC91x IRQ line
connected to a STMPE2401 GPIO expander on I2C.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
xps-ethernetlite-2.00.b' for QEMU using
When use current latest upstream qemu (current version: 2.1.2), need let
driver compatible with 'xlnx,xps-ethernetlite-2.00.b', or can not find
net device in microblaze qemu. Related QEMU commands under fedora 20:
yum install libvirt
yum install tunctl
tunctl -b
ip link set tap0 up
brctl addif virbr0 tap0
./microblaze-softmmu/qemu-system-microblaze -M petalogix-s3adsp1800 \
-kernel ../linux-stable.microblaze/arch/microblaze/boot/linux.bin \
-no-reboot -append "console=ttyUL0,115200 doreboot" -nographic \
-net nic,vlan=0,model=xlnx.xps-ethernetlite,macaddr=00:16:35:AF:94:00 \
-net tap,vlan=0,ifname=tap0,script=no,downscript=no
in microblaze qemu bash (guest machine):
ifconfig eth0 add 192.168.122.2 netmask 255.255.255.0
ifconfig eth0 up
After add this patch, can find the device, and can be used by 'telnetd'
(need cross-build busybox with glibc for it), then outside can telnet to
it without password.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Callers of bcm_sysport_init_tx_ring() can currently fail, and will
always call bcm_sysport_fini_tx_ring() in a loop ending at the number of
TX queues (32) without checking if the TX ring was successfully
initialized or not.
Update bcm_sysport_fini_tx_ring() to return early and avoid a crash
de-referencing ring->cbs if the TX ring was not initialized, since
ring->cbs is the last part of the initialization done by
bcm_sysport_init_tx_ring() that could fail.
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
We should not be allocating a single byte of DMA coherent memory, but
instead a full-sized struct dma_desc (8 bytes).
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
we are allocating memory using kzalloc for struct mvpp2_prs_entry,
but later when we are getting error we were just returning the error
value without releasing the memory.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| |\| | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:
====================
pull request: wireless 2014-10-31
Please pull this small batch of spooky fixes intended for the 3.18
stream...boo!
Cyril Brulebois adds an rt2x00 device ID.
Dan Carpenter provides a one-line masking fix for an ath9k debugfs
entry.
Larry Finger gives us a package of small rtlwifi fixes which add some
bits that were left out of some feature updates that were included
in the merge window. Hopefully this isn't a sign that the rtlwifi
base is getting too big...
Marc Yang brings a fix for a temporary mwifiex stall when doing 11n
RX reordering.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
An error in the code makes the allocated space for firmware to be too
small.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Murilo Opsfelder Araujo <mopsfelder@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
