summaryrefslogtreecommitdiffstats
path: root/drivers/pci/host/pcie-xilinx.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* PCI: Collect all native drivers under drivers/pci/controller/Shawn Lin2018-06-081-702/+0
| | | | | | | | | | | | | | | | | | Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc. These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there. No functional change intended. Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge branch 'lorenzo/pci/dwc'Bjorn Helgaas2018-06-061-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) * lorenzo/pci/dwc: PCI: qcom: add runtime pm support to pcie_port PCI: qcom: Fix a bitwise vs logical NOT typo PCI: dwc: dra7xx: Use devm_ioremap_resource() instead of devm_ioremap() PCI: dwc: artpec6: Use devm_ioremap_resource() instead of devm_ioremap() misc: pci_endpoint_test: Add DesignWare EP entry dt-bindings: PCI: designware: Add support for EP in DesignWare driver PCI: dwc: Add support for EP mode dt-bindings: PCI: designware: Example update PCI: Move private DT related functions into private header PCI: dwc: Move CONFIG_PCI depends to menu PCI: dwc: Replace magic number by defines PCI: dwc: Small computation improvement PCI: dwc: Replace lower into upper case characters PCI: dwc: Define maximum number of vectors PCI: imx6: Remove space before tabs PCI: keystone: Do not treat link up message as error # Conflicts: # include/linux/of_pci.h
| * PCI: Move private DT related functions into private headerRob Herring2018-05-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The functions in linux/of_pci.h are primarily used by host bridge drivers, so they can be private to drivers/pci/. The remaining functions are still used mostly in host bridge drivers that still live in arch specific code. Hopefully someday, those will get moved into drivers/pci as well. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jingoo Han <jingoohan1@gmail.com>
* | PCI: Rework of_pci_get_host_bridge_resources() to ↵Jan Kiszka2018-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devm_of_pci_get_host_bridge_resources() of_pci_get_host_bridge_resources() allocates the resource structures it fills dynamically, but none of its callers care to release them so far. Rather than requiring everyone to do this explicitly, convert the existing function to a managed version. Tested-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Joao Pinto <jpinto@synopsys.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
* | PCI: Pass struct device to of_pci_get_host_bridge_resources()Jan Kiszka2018-05-301-2/+2
|/ | | | | | | | | | | | | | Another step towards a managed version of of_pci_get_host_bridge_resources(): Feed in the underlying device, rather than just the OF node. This will allow us to use managed resource allocation internally later on. Tested-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> CC: Joao Pinto <Joao.Pinto@synopsys.com> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
* PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplateBjorn Helgaas2018-01-281-5/+1
| | | | | | | | | | | | Add SPDX GPL-2.0+ to all PCI files that specified the GPL and allowed either GPL version 2 or any later version. Remove the boilerplate GPL version 2 or later language, relying on the assertion in b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") that the SPDX identifier may be used instead of the full boilerplate text. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up()Bjorn Helgaas2017-11-091-3/+3
| | | | | | | | Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() to follow the convention of other drivers. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* Merge branch 'pci/trivial' into nextBjorn Helgaas2017-09-071-1/+1
|\ | | | | | | | | | | | | * pci/trivial: PCI: Fix typos and whitespace errors PCI: Remove unused "res" variable from pci_resource_io() PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()
| * PCI: Fix typos and whitespace errorsBjorn Helgaas2017-09-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix various typos and whitespace errors: s/Synopsis/Synopsys/ s/Designware/DesignWare/ s/Keystine/Keystone/ s/gpio/GPIO/ s/pcie/PCIe/ s/phy/PHY/ s/confgiruation/configuration/ No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: xilinx: Don't enable config completion interruptsPaul Burton2017-08-161-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Xilinx AXI bridge for PCI Express device provides interrupts indicating the completion of config space accesses. We have previously enabled/unmasked them but do nothing with them besides acknowledge them. Leave the interrupts masked in order to avoid servicing a large number of pointless interrupts during boot. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Bharat Kumar Gogada <bharatku@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Ravikiran Gummaluri <rgummal@xilinx.com>
* | PCI: xilinx: Unify INTx & MSI interrupt decodePaul Burton2017-08-161-33/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The INTx & MSI interrupt decode paths duplicated a fair bit of common functionality. They also strictly handled interrupts in order of INTx then MSI, so if both types of interrupt were to be asserted simultaneously and the MSI interrupt were first in the FIFO then the INTx code would read it & ignore it before the MSI code then had to read it again, wasting the original FIFO read. Unify the INTx & MSI decode in order to reduce that duplication & allow a single FIFO read to be performed for each interrupt regardless of its type. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Bharat Kumar Gogada <bharatku@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Ravikiran Gummaluri <rgummal@xilinx.com>
* | PCI: xilinx: Translate INTx range to hwirqs 0-3Paul Burton2017-08-161-3/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pcie-xilinx driver creates an IRQ domain of size 4 for legacy PCI INTx interrupts, which at first glance seems reasonable since there are 4 possible such interrupts. Unfortunately the driver then proceeds to use the range 1-4 as the hwirq numbers for INTA-INTD, causing warnings & broken interrupts when attempting to use INTD/hwirq=4 due to it being beyond the range of the IRQ domain: WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:365 irq_domain_associate+0x170/0x220 error: hwirq 0x4 is too large for dummy Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc5-00126-g19e1b3a10aad-dirty #427 Stack : 0000000000000000 0000000000000004 0000000000000006 ffffffff8092c78a 0000000000000061 ffffffff8018bf60 0000000000000000 0000000000000000 ffffffff8088c287 ffffffff80811d18 a8000000ffc60000 ffffffff80926678 0000000000000001 0000000000000000 ffffffff80887880 ffffffff80960000 ffffffff80920000 ffffffff801e6744 ffffffff80887880 a8000000ffc4f8f8 000000000000089c ffffffff8018d260 0000000000010000 ffffffff80811d18 0000000000000000 0000000000000001 0000000000000000 0000000000000000 0000000000000000 a8000000ffc4f840 0000000000000000 ffffffff8042cf34 0000000000000000 0000000000000000 0000000000000000 0000000000040c00 0000000000000000 ffffffff8010d1c8 0000000000000000 ffffffff8042cf34 ... Call Trace: [<ffffffff8010d1c8>] show_stack+0x80/0xa0 [<ffffffff8042cf34>] dump_stack+0xd4/0x110 [<ffffffff8013ea98>] __warn+0xf0/0x108 [<ffffffff8013eb14>] warn_slowpath_fmt+0x3c/0x48 [<ffffffff80196528>] irq_domain_associate+0x170/0x220 [<ffffffff80196bf0>] irq_create_mapping+0x88/0x118 [<ffffffff801976a8>] irq_create_fwspec_mapping+0xb8/0x320 [<ffffffff80197970>] irq_create_of_mapping+0x60/0x70 [<ffffffff805d1318>] of_irq_parse_and_map_pci+0x20/0x38 [<ffffffff8049c210>] pci_fixup_irqs+0x60/0xe0 [<ffffffff8049cd64>] xilinx_pcie_probe+0x28c/0x478 [<ffffffff804e8ca8>] platform_drv_probe+0x50/0xd0 [<ffffffff804e73a4>] driver_probe_device+0x2c4/0x3a0 [<ffffffff804e7544>] __driver_attach+0xc4/0xd0 [<ffffffff804e5254>] bus_for_each_dev+0x64/0xa8 [<ffffffff804e5e40>] bus_add_driver+0x1f0/0x268 [<ffffffff804e8000>] driver_register+0x68/0x118 [<ffffffff801001a4>] do_one_initcall+0x4c/0x178 [<ffffffff808d3ca8>] kernel_init_freeable+0x204/0x2b0 [<ffffffff80730b68>] kernel_init+0x10/0xf8 [<ffffffff80106218>] ret_from_kernel_thread+0x14/0x1c Fix this by making use of the new pci_irqd_intx_xlate() helper to translate the INTx 1-4 range into the 0-3 range suitable for the IRQ domain of size 4, and stop adding 1 to the hwirq number decoded from the interrupt FIFO which is already in the range 0-3. Whilst we're here we switch to using PCI_NUM_INTX rather than the magic number 4, making it clearer what the 4 means. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Bharat Kumar Gogada <bharatku@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Ravikiran Gummaluri <rgummal@xilinx.com>
* PCI: xilinx: Make of_device_ids constArvind Yadav2017-07-031-1/+1
| | | | | | | | | | | | | | | | of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 195 600 0 795 31b drivers/pci/host/pcie-xilinx.o File size after constify xilinx_pcie_of_match: text data bss dec hex filename 595 184 0 779 30b drivers/pci/host/pcie-xilinx.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: xilinx: Drop pci_fixup_irqs()Lorenzo Pieralisi2017-07-021-3/+2
| | | | | | | | | | | | Since, through struct pci_host_bridge.map/swizzle_irq hooks, IRQs are now allocated in the pci_assign_irq() callback automatically, PCI host bridge drivers can stop relying on pci_fixup_irqs() for IRQ allocation. Drop pci_fixup_irqs() usage from PCI xilinx host bridge driver. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Michal Simek <michal.simek@xilinx.com>
* PCI: xilinx: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-07-021-10/+19
| | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert PCI xilinx host code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Michal Simek <michal.simek@xilinx.com>
* PCI: xilinx: Update PCI config space remap functionLorenzo Pieralisi2017-04-241-1/+1
| | | | | | | | | | | PCI configuration space should be mapped with a memory region type that generates on the CPU host bus non-posted write transations. Update the driver to use the devm_pci_remap_cfg* interface to make sure the correct memory mappings for PCI configuration space are used. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com>
* PCI: xilinx: Configure PCIe MPS settingsBjorn Helgaas2017-02-081-1/+3
| | | | | | Make sure PCIe MPS settings are valid when we enumerate a new hierarchy. Based-on-patch-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: xilinx: Removed unused xilinx_pcie_assign_msi() argumentBjorn Helgaas2016-10-121-3/+2
| | | | | | | xilinx_pcie_assign_msi() doesn't use the struct xilinx_pcie_port pointer passed to it, so remove the argument completely. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: xilinx: Remove unused platform dataBjorn Helgaas2016-10-121-2/+0
| | | | | | The xilinx driver never uses the platform drvdata pointer, so don't bother setting it. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: xilinx: Add local struct device pointersBjorn Helgaas2016-10-121-26/+29
| | | | | | Use a local "struct device *dev" for brevity and consistency with other drivers. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
*-. Merge branches 'pci/host-aardvark', 'pci/host-altera', 'pci/host-artpec', ↵Bjorn Helgaas2016-10-051-12/+18
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'pci/host-designware', 'pci/host-hv', 'pci/host-keystone', 'pci/host-rcar', 'pci/host-rockchip', 'pci/host-tegra' and 'pci/host-xilinx' into next * pci/host-aardvark: PCI: aardvark: Remove redundant dev_err call in advk_pcie_probe() * pci/host-altera: PCI: altera: Remove redundant platform_get_resource() return value check PCI: altera: Move retrain from fixup to altera_pcie_host_init() PCI: altera: Rework config accessors for use without a struct pci_bus PCI: altera: Poll for link training status after retraining the link * pci/host-artpec: PCI: artpec6: Drop __init from artpec6_add_pcie_port() * pci/host-designware: PCI: designware: Remove redundant platform_get_resource() return value check PCI: designware: Exchange viewport of `MEMORYs' and `CFGs/IOs' PCI: designware: Keep viewport fixed for IO transaction if num_viewport > 2 PCI: designware: Check LTSSM training bit before deciding link is up PCI: designware: Add iATU Unroll feature PCI: designware: Wait for iATU enable PCI: designware: Move link wait definitions to .c file PCI: designware: Return data directly from dw_pcie_readl_rc() * pci/host-hv: PCI: hv: Handle hv_pci_generic_compl() error case PCI: hv: Handle vmbus_sendpacket() failure in hv_compose_msi_msg() PCI: hv: Remove the unused 'wrk' in struct hv_pcibus_device PCI: hv: Use pci_function_description[0] in struct definitions PCI: hv: Use zero-length array in struct pci_packet PCI: hv: Use list_move_tail() instead of list_del() + list_add_tail() * pci/host-keystone: PCI: keystone: Propagate request_irq() failure * pci/host-rcar: PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot PCI: rcar: Fix some checkpatch warnings PCI: rcar: Add multi-MSI support PCI: rcar: Don't disable/unprepare clocks on prepare/enable failure PCI: rcar: Consolidate register space lookup and ioremap * pci/host-rockchip: PCI: rockchip: Fix wrong transmitted FTS count PCI: rockchip: Improve the deassert sequence of four reset pins PCI: rockchip: Increase the Max Credit update interval PCI: rockchip: Add Rockchip PCIe controller support dt-bindings: PCI: rockchip: Add DT bindings for Rockchip PCIe controller * pci/host-tegra: PCI: tegra: Use of_device_get_match_data() PCI: tegra: Remove redundant _data suffix * pci/host-xilinx: microblaze/PCI: Add multidomain support for procfs PCI: xilinx: Dispose of MSI virtual IRQ PCI: xilinx: Clear correct MSI set bit PCI: xilinx: Clear interrupt register for invalid interrupt PCI: xilinx: Keep both legacy and MSI interrupt domain references PCI: xilinx-nwl: Enable all MSI interrupts using MSI mask PCI: xilinx-nwl: Expand error logging Conflicts: drivers/pci/host/pcie-xilinx.c
| | * PCI: xilinx: Dispose of MSI virtual IRQBharat Kumar Gogada2016-09-131-0/+1
| | | | | | | | | | | | | | | | | | | | | Dispose of virtual IRQ being created for MSI interrupts. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
| | * PCI: xilinx: Clear correct MSI set bitBharat Kumar Gogada2016-09-131-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | Kernel provides virtual IRQ number at teardown. Get hwirq number from virtual IRQ and clear correct MSI set bit. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
| | * PCI: xilinx: Clear interrupt register for invalid interruptBharat Kumar Gogada2016-09-131-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | The interrupt decode register is not being cleared if an invalid interrupt arises. Clear the decode register in this case. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
| | * PCI: xilinx: Keep both legacy and MSI interrupt domain referencesBharat Kumar Gogada2016-09-131-11/+15
| |/ | | | | | | | | | | | | | | | | | | When built with MSI support, the legacy domain reference was being overwritten with MSI. Create two separate domains for MSI and legacy interrupts. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* | Merge branch 'pci/virtualization' into nextBjorn Helgaas2016-10-031-7/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | * pci/virtualization: PCI: xilinx: Relax device number checking to allow SR-IOV PCI: designware: Relax device number checking to allow SR-IOV PCI: altera: Relax device number checking to allow SR-IOV PCI: Check for pci_setup_device() failure in pci_iov_add_virtfn() PCI: Mark Atheros AR9580 to avoid bus reset
| * | PCI: xilinx: Relax device number checking to allow SR-IOVPo Liu2016-09-121-7/+0
| |/ | | | | | | | | | | | | | | | | | | Previously we only allowed device 0 to be directly attached to the root port. But SR-IOV devices may use non-zero device numbers for VFs. Remove the restriction that only device 0 may be attached to a root port. [bhelgaas: changelog] Signed-off-by: Po Liu <po.liu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* / PCI: xilinx: Make explicitly non-modularPaul Gortmaker2016-08-251-51/+2
|/ | | | | | | | | | | | | | | | | | | | This code is not being built as a module by anyone: drivers/pci/host/Kconfig:config PCIE_XILINX drivers/pci/host/Kconfig: bool "Xilinx AXI PCIe host bridge support" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Note that for non-modular code, builtin_platform_driver() uses the same init level priority as module_platform_driver(), so this doesn't change init ordering. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
*-. Merge branches 'pci/host-aardvark', 'pci/host-altera', 'pci/host-dra7xx', ↵Bjorn Helgaas2016-08-011-3/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'pci/host-hv', 'pci/host-vmd' and 'pci/host-xilinx' into next * pci/host-aardvark: arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller * pci/host-altera: PCI: altera: Poll for link up status after retraining the link PCI: altera: Check link status before retrain link PCI: altera: Reorder read/write functions * pci/host-dra7xx: PCI: dra7xx: Fix return value in case of error * pci/host-hv: PCI: hv: Fix interrupt cleanup path PCI: hv: Handle all pending messages in hv_pci_onchannelcallback() PCI: hv: Don't leak buffer in hv_pci_onchannelcallback() * pci/host-vmd: x86/PCI: VMD: Separate MSI and MSI-X vector sharing x86/PCI: VMD: Use x86_vector_domain as parent domain x86/PCI: VMD: Use lock save/restore in interrupt enable path x86/PCI: VMD: Initialize list item in IRQ disable x86/PCI: VMD: Select device dma ops to override * pci/host-xilinx: PCI: xilinx: Fix return value in case of error Manually apply changes from pci/demodularize-hosts and pci/host-request-windows to drivers/pci/host/pci-aardvark.c
| | * PCI: xilinx: Fix return value in case of errorChristophe JAILLET2016-07-251-3/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In xilinx_pcie_init_irq_domain(), the pattern used to check and return error is: if (!var) { dev_err(...); return PTR_ERR(var); } So the returned value in case of error is always 0, which means 'success'. Change it to return -ENODEV instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
* | PCI: xilinx: Request host bridge window resourcesBjorn Helgaas2016-06-201-0/+5
| | | | | | | | | | | | Request host bridge window resources so they appear in ioport_resource and iomem_resource and are reflected in /proc/ioports and /proc/iomem. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: xilinx: Free bridge resource list on failureBjorn Helgaas2016-06-201-3/+8
|/ | | | | | | of_pci_get_host_bridge_resources() allocates a list of resources for host bridge windows. If we fail after allocating that list, free it before we return error. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: xilinx: Don't call pci_fixup_irqs() on MicroblazeBharat Kumar Gogada2016-03-081-0/+2
| | | | | | | | | | | | | | | | The Xilinx AXI PCIe Host Bridge Soft IP driver was previously only supported on ARM (in particular, on ARCH_ZYNC), and pci_fixup_irqs() is available there. But Microblaze will do IRQ fixup in pcibios_add_device(), so pci_fixup_irqs() is not available on Microblaze. Don't call pci_fixup_irqs() on Microblaze, so the driver can work on both Zynq and Microblaze Architectures. [bhelgaas: revise changelog to show similarity to bdb8a1844f31 ("PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM")] Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Simek <michal.simek@xilinx.com>
* PCI: xilinx: Remove dependency on ARM-specific struct hw_pciBharat Kumar Gogada2016-03-081-66/+16
| | | | | | | | | | | | | | | | The Xilinx PCIe host controller driver uses pci_common_init_dev(), which is ARM-specific and requires the ARM struct hw_pci. The part of pci_common_init_dev() that is needed is limited and can be done here without using hw_pci. Create and scan the root bus directly without using the ARM pci_common_init_dev() interface. [bhelgaas: revise changelog to show similarity to 79953dd22c1d ("PCI: rcar: Remove dependency on ARM-specific struct hw_pci")] Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Simek <michal.simek@xilinx.com>
* PCI: xilinx: Use of_pci_get_host_bridge_resources() to parse DTBharat Kumar Gogada2016-03-081-102/+5
| | | | | | | | | | | Use the new of_pci_get_host_bridge_resources() API in place of the PCI OF DT parser. [bhelgaas: revise changelog to show similarity to 0021d22b73d6 ("PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT")] Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Simek <michal.simek@xilinx.com>
* PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREADGrygorii Strashko2016-01-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On -RT and if kernel is booting with "threadirqs" cmd line parameter, PCIe/PCI (MSI) IRQ cascade handlers (like dra7xx_pcie_msi_irq_handler()) will be forced threaded and, as result, will generate warnings like this: WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174() irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts Backtrace: (warn_slowpath_common) from (warn_slowpath_fmt+0x38/0x40) (warn_slowpath_fmt) from (handle_irq_event_percpu+0x14c/0x174) (handle_irq_event_percpu) from (handle_irq_event+0x84/0xb8) (handle_irq_event) from (handle_simple_irq+0x90/0x118) (handle_simple_irq) from (generic_handle_irq+0x30/0x44) (generic_handle_irq) from (dra7xx_pcie_msi_irq_handler+0x7c/0x8c) (dra7xx_pcie_msi_irq_handler) from (irq_forced_thread_fn+0x28/0x5c) (irq_forced_thread_fn) from (irq_thread+0x128/0x204) This happens because all of them invoke generic_handle_irq() from the requested handler. generic_handle_irq() grabs raw_locks and thus needs to run in raw-IRQ context. This issue was originally reproduced on TI dra7-evem, but, as was identified during discussion [1], other hosts can also suffer from this issue. Fix all them at once by marking PCIe/PCI (MSI) IRQ cascade handlers IRQF_NO_THREAD explicitly. [1] http://lkml.kernel.org/r/1448027966-21610-1-git-send-email-grygorii.strashko@ti.com [bhelgaas: add stable tag, fix typos] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> (for imx6) CC: stable@vger.kernel.org CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Jingoo Han <jingoohan1@gmail.com> CC: Kukjin Kim <kgene@kernel.org> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Richard Zhu <Richard.Zhu@freescale.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Alexandre Courbot <gnurou@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Pratyush Anand <pratyush.anand@gmail.com> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com> CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
* Merge branch 'irq-core-for-linus' of ↵Linus Torvalds2015-09-011-7/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
| * PCI: xilinx: Fix typo in function nameJiang Liu2015-08-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a typo in commit e39758e0ea76 in linux-next, which incorrectly spells "msi_desc_to_pci_sysdata()" as "msi_desc_to_pci_sys_data()" and causes build failure: > ../drivers/pci/host/pcie-xilinx.c:235:3: error: implicit declaration of function 'msi_desc_to_pci_sys_data' [-Werror=implicit-function-declaration] Fixes: e39758e0ea76 "PCI: Use helper functions to access fields in struct msi_desc" Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Brown <broonie@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: Srikanth Thokala <sthokal@xilinx.com> Cc: Rob Herring <robh@kernel.org> Cc: Yijing Wang <wangyijing@huawei.com> Link: http://lkml.kernel.org/r/1439912763-10645-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * PCI: Use helper functions to access fields in struct msi_descJiang Liu2015-07-221-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use helper functions to access fields in struct msi_desc, so we could easily refine msi_desc later. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Yijing Wang <wangyijing@huawei.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Stuart Yoder <stuart.yoder@freescale.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Soeren Brinkmann <soren.brinkmann@xilinx.com> Cc: Srikanth Thokala <sthokal@xilinx.com> Cc: Rob Herring <robh@kernel.org> Link: http://lkml.kernel.org/r/1436428847-8886-9-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| |
| \
*-. | Merge branches 'pci/enumeration' and 'pci/misc' into nextBjorn Helgaas2015-08-281-3/+8
|\ \| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/enumeration: PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci ARM/PCI: Set MPS before pci_bus_add_devices() * pci/misc: PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
| * | ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi()Lorenzo Pieralisi2015-08-201-3/+8
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARM previously stored the msi_controller pointer in its sysdata, struct pci_sys_data, and implemented pcibios_msi_controller() to retrieve it. That made PCI host controller drivers specific to ARM because they had to put the msi_controller pointer in the ARM-specific pci_sys_data. There is now a generic mechanism, pci_scan_root_bus_msi(), for giving the msi_controller pointer to the PCI core. Use this for all ARM systems and for the DesignWare and Xilinx PCI host controller drivers. This removes an ARM dependency from the DesignWare, DRA7xx, EXYNOS, i.MX6, Keystone, Layerscape, SPEAr13xx, and Xilinx drivers. [bhelgaas: changelog, split into separate patch] Suggested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> CC: Pratyush Anand <pratyush.anand@gmail.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Simon Horman <horms@verge.net.au> CC: Russell King <linux@arm.linux.org.uk> CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Michal Simek <michal.simek@xilinx.com> CC: Marc Zyngier <marc.zyngier@arm.com>
| |
| \
*-. \ Merge branches 'pci/hotplug', 'pci/iommu', 'pci/irq' and ↵Bjorn Helgaas2015-08-141-2/+0
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'pci/virtualization' into next * pci/hotplug: PCI: pciehp: Remove ignored MRL sensor interrupt events PCI: pciehp: Remove unused interrupt events PCI: pciehp: Handle invalid data when reading from non-existent devices PCI: Hold pci_slot_mutex while searching bus->slots list PCI: Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem PCI: pciehp: Simplify pcie_poll_cmd() PCI: Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot * pci/iommu: PCI: Remove pci_ats_enabled() PCI: Stop caching ATS Invalidate Queue Depth PCI: Move ATS declarations to linux/pci.h so they're all together PCI: Clean up ATS error handling PCI: Use pci_physfn() rather than looking up physfn by hand PCI: Inline the ATS setup code into pci_ats_init() PCI: Rationalize pci_ats_queue_depth() error checking PCI: Reduce size of ATS structure elements PCI: Embed ATS info directly into struct pci_dev PCI: Allocate ATS struct during enumeration iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth * pci/irq: PCI: Kill off set_irq_flags() usage * pci/virtualization: PCI: Add ACS quirks for Intel I219-LM/V
| | * PCI: Kill off set_irq_flags() usageRob Herring2015-08-111-2/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | set_irq_flags is ARM-specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions, and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE, and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Alexandre Courbot <gnurou@gmail.com> CC: Jingoo Han <jingoohan1@gmail.com> CC: Pratyush Anand <pratyush.anand@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
* / PCI: xilinx: Check for MSI interrupt flag before handling as INTxRussell Joyce2015-07-211-8/+11
|/ | | | | | | | | | | | | | Occasionally both MSI and INTx bits in the interrupt decode register are set at once by the Xilinx AXI PCIe Bridge, so the MSI flag in the interrupt message should be checked to ensure that the correct handler is used. If this check is not in place and the interrupt message type is MSI, the INTx handler will be used erroneously when both type bits are set. This will also be followed by a second read of the message FIFO, which can result in the function returning early and the interrupt decode register not being cleared if the FIFO is now empty. Signed-off-by: Russell Joyce <russell.joyce@york.ac.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge tag 'pm+acpi-3.20-rc1' of ↵Linus Torvalds2015-02-111-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "We have a few new features this time, including a new SFI-based cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new devfreq class for providing its governors with raw utilization data and a new ACPI driver for AMD SoCs. Still, the majority of changes here are reworks of existing code to make it more straightforward or to prepare it for implementing new features on top of it. The primary example is the rework of ACPI resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with support for IOAPIC hotplug implemented on top of it, but there is quite a number of changes of this kind in the cpufreq core, ACPICA, ACPI EC driver, ACPI processor driver and the generic power domains core code too. The most active developer is Viresh Kumar with his cpufreq changes. Specifics: - Rework of the core ACPI resources parsing code to fix issues in it and make using resource offsets more convenient and consolidation of some resource-handing code in a couple of places that have grown analagous data structures and code to cover the the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng). - ACPI-based IOAPIC hotplug support on top of the resources handling rework (Jiang Liu, Yinghai Lu). - ACPICA update to upstream release 20150204 including an interrupt handling rework that allows drivers to install raw handlers for ACPI GPEs which then become entirely responsible for the given GPE and the ACPICA core code won't touch it (Lv Zheng, David E Box, Octavian Purdila). - ACPI EC driver rework to fix several concurrency issues and other problems related to events handling on top of the ACPICA's new support for raw GPE handlers (Lv Zheng). - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power Subsystem) driver for Intel chips (Ken Xue). - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko Nikula). - Two new blacklist entries for machines (Samsung 730U3E/740U3E and 510R) where the native backlight interface doesn't work correctly while the ACPI one does (Hans de Goede). - Rework of the ACPI processor driver's handling of idle states to make the code more straightforward and less bloated overall (Rafael J Wysocki). - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht, Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei Bai). - PCI core power management modification to avoid resuming (some) runtime-suspended devices during system suspend if they are in the right states already (Rafael J Wysocki). - New SFI-based cpufreq driver for Intel platforms using SFI (Srinidhi Kasagar). - cpufreq core fixes, cleanups and simplifications (Viresh Kumar, Doug Anderson, Wolfram Sang). - SkyLake CPU support and other updates for the intel_pstate driver (Kristen Carlson Accardi, Srinivas Pandruvada). - cpufreq-dt driver cleanup (Markus Elfring). - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla). - Generic power domains core code fixes and cleanups (Ulf Hansson). - Operating Performance Points (OPP) core code cleanups and kernel documentation update (Nishanth Menon). - New dabugfs interface to make the list of PM QoS constraints available to user space (Nishanth Menon). - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso). - New devfreq class (devfreq_event) to provide raw utilization data to devfreq governors (Chanwoo Choi). - Assorted minor fixes and cleanups related to power management (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel Machek, Todd E Brandt, Wonhong Kwon). - turbostat updates (Len Brown) and cpupower Makefile improvement (Sriram Raghunathan)" * tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits) tools/power turbostat: relax dependency on APERF_MSR tools/power turbostat: relax dependency on invariant TSC Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS tools/power turbostat: relax dependency on root permission ACPI / video: Add disable_native_backlight quirk for Samsung 510R ACPI / PM: Remove unneeded nested #ifdef USB / PM: Remove unneeded #ifdef and associated dead code intel_pstate: provide option to only use intel_pstate with HWP ACPI / EC: Add GPE reference counting debugging messages ACPI / EC: Add query flushing support ACPI / EC: Refine command storm prevention support ACPI / EC: Add command flushing support. ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag ACPI: add AMD ACPI2Platform device support for x86 system ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse() ACPI / EC: Update revision due to raw handler mode. ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp. ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode. ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model ...
| * PCI: Use common resource list management code instead of private implementationJiang Liu2015-02-051-2/+2
| | | | | | | | | | | | | | | | | | | | Use common resource list management data structure and interfaces instead of private implementation. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | Merge branch 'pci/config' into nextBjorn Helgaas2015-02-021-79/+9
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/config: PCI: xilinx: Convert to use generic config accessors PCI: xgene: Convert to use generic config accessors PCI: tegra: Convert to use generic config accessors PCI: rcar: Convert to use generic config accessors PCI: generic: Convert to use generic config accessors powerpc/powermac: Convert PCI to use generic config accessors powerpc/fsl_pci: Convert PCI to use generic config accessors ARM: ks8695: Convert PCI to use generic config accessors ARM: sa1100: Convert PCI to use generic config accessors ARM: integrator: Convert PCI to use generic config accessors ARM: cns3xxx: Convert PCI to use generic config accessors PCI: Add generic config accessors powerpc/PCI: Add struct pci_ops member names to initialization mn10300/PCI: Add struct pci_ops member names to initialization MIPS: PCI: Add struct pci_ops member names to initialization frv/PCI: Add struct pci_ops member names to initialization
| * | PCI: xilinx: Convert to use generic config accessorsRob Herring2015-01-301-79/+9
| |/ | | | | | | | | | | | | | | | | | | Convert the Xilinx host PCI driver to use the generic config access functions. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com> CC: linux-arm-kernel@lists.infradead.org
* / PCI: xilinx: Fix harmless format string warningArnd Bergmann2015-01-231-2/+2
|/ | | | | | | | | | | | | | | | | | The xilinx PCIe driver prints a register value whose type is propagated to the type returned by the GENMASK() macro. Unfortunately, that type has recently changed as the result of a bug fix, so now we get a warning about the type: drivers/pci/host/pcie-xilinx.c: In function 'xilinx_pcie_clear_err_interrupts': drivers/pci/host/pcie-xilinx.c:154:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=] Change the code so we always print the number as an 'unsigned long' type to avoid the warning. The original code was fine on 32-bit architectures but not on 64-bit. Now it works as expected on both. Fixes: 00b4d9a1412 ("bitops: Fix shift overflow in GENMASK macros") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
* Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2014-12-151-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 00:21:43 +0100