summaryrefslogtreecommitdiffstats
path: root/drivers/pci/quirks.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* libata/IDE: remove combined mode quirkJeff Garzik2007-04-281-113/+0
| | | | | | | | | | | | | | | | | | | | | Both old-IDE and libata should be able handle all controllers and devices found using normal resource reservation methods. This eliminates the awful, low-performing split-driver configuration where old-IDE drove the PATA portion of a PCI device, in PIO-only mode, and libata drove the SATA portion of the /same/ PCI device, in DMA mode. Typically vendors would ship SATA hard drive / PATA optical configuration, which would lend itself to slow (PIO-only) CD-ROM performance. For Intel users running in combined mode, it is now wholly dependent on your driver choice (potentially link order, if you compile both drivers in) whether old-IDE or libata will drive your hardware. In either case, you will get full performance from both SATA and PATA ports now, without having to pass a kernel command line parameter. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* PCI: Stop unhiding the SMBus on Toshiba laptopsJean Delvare2007-03-261-11/+7
| | | | | | | | | | | | | It was found that the Toshiba laptops with hidden Intel SMBus have SMM code handling the thermal management which accesses the SMBus. Thus it is not safe to unhide it and let Linux access it. We have to leave the SMBus hidden. SMM is a pain, really. This fixes bugs #6315 and #6395, for good this time. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] msi: sanely support hardware level msi disablingEric W. Biederman2007-03-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | In some cases when we are not using msi we need a way to ensure that the hardware does not have an msi capability enabled. Currently the code has been calling disable_msi_mode to try and achieve that. However disable_msi_mode has several other side effects and is only available when msi support is compiled in so it isn't really appropriate. Instead this patch implements pci_msi_off which disables all msi and msix capabilities unconditionally with no additional side effects. pci_disable_device was redundantly clearing the bus master enable flag and clearing the msi enable bit. A device that is not allowed to perform bus mastering operations cannot generate intx or msi interrupt messages as those are essentially a special case of dma, and require bus mastering. So the call in pci_disable_device to disable msi capabilities was redundant. quirk_pcie_pxh also called disable_msi_mode and is updated to use pci_msi_off. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ahci/pata_jmicron: match class not function numberTejun Heo2007-03-021-1/+4
| | | | | | | | | | | | | | Make jmiron_ata quirk update pdev->class after programming the device and update ahci and pata_jmicron such that they match class code instead of checking function number manually. For ahci, it matches for vendor and class. For pata_jmicron, it matches vendor, device and class as IDE class isn't as well defined as AHCI class. This makes jmicron device matching more conventional and script friendly. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* jmicron ATA: reimplement jmicron ATA quirkTejun Heo2007-03-021-30/+50
| | | | | | | | | | | | | | | | Reimplement jmicron ATA quirk. * renamed to quirk_jmicron_ata() * quirk is invoked only for the affected controllers * programming is stricter. e.g. conf5 bit24 is cleared if unnecessary. * code factored for readability * JMB360 and JMB368 are programmed into proper mode Verified on JMB360, 363 and 368. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Add pci class code for SATA & AHCI, and replace some magic numbers.Conke Hu2007-02-091-1/+1
| | | | | Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds2007-02-081-0/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (23 commits) ide-acpi support warning fix ACPI support for IDE devices IDE Driver for Delkin/Lexar/etc.. cardbus CF adapter ide: it8213 IDE driver update (version 2) ide: add it8213 IDE driver tc86c001: add missing __init tag for tc86c001_ide_init() tc86c001: mark init_chipset_tc86c001() with __devinit tag tc86c001: init_hwif_tc86c001() can be static ide: add Toshiba TC86C001 IDE driver (take 2) pdc202xx_new: remove check_in_drive_lists abomination pdc202xx_new: remove useless code slc90e66: carry over fixes from piix driver piix: tuneproc() fixes/cleanups piix: fix 82371MX enablebits hpt366: HPT36x PCI clock detection fix hpt366: init code rewrite hpt366: clean up DMA timeout handling for HPT370 hpt366: merge HPT37x speedproc handlers hpt366: cache channel's MCR address hpt366: switch to using pci_get_slot ...
| * ide: add Toshiba TC86C001 IDE driver (take 2)Sergei Shtylyov2007-02-071-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the driver for the Toshiba TC86C001 GOKU-S PCI IDE controller, completely reworked from the original brain-damaged Toshiba's 2.4 version. This single channel UltraDMA/66 controller is very simple in programming, yet Toshiba managed to plant many interesting bugs in it. The particularly nasty "limitation 5" (as they call the errata) caused me to abuse the IDE core in a possibly most interesting way so far. However, this is still better than the #ifdef mess in drivers/ide/ide-io.c that the original version included (well, it had much more mess)... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Alan Cox <alan@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* | MSI: Replace pci_msi_quirk with calls to pci_no_msi()Michael Ellerman2007-02-081-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I don't see any reason why we need pci_msi_quirk, quirk code can just call pci_no_msi() instead. Remove the check of pci_msi_quirk in msi_init(). This is safe as all calls to msi_init() are protected by calls to pci_msi_supported(), which checks pci_msi_enable, which is disabled by pci_no_msi(). The pci_disable_msi routines didn't check pci_msi_quirk, only pci_msi_enable, but as far as I can see that was a bug not a feature. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | PCI: remove quirk_sis_96x_compatible()Adrian Bunk2007-02-081-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Since 2.6.0-test10, all quirk_sis_96x_compatible() had any effect on was a printk(). This patch therefore removes it. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | PCI: Speed up the Intel SMBus unhiding quirkJean Delvare2007-02-081-13/+11
| | | | | | | | | | | | | | | | | | | | | | Speed up the Intel SMBus PCI quirk by avoiding tests which can only fail. This also makes the compiled code significantly smaller when using gcc 3.2/3.4. gcc 4.x appears to optimize the code by itself so this change doesn't make a difference there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | PCI Quirk: 1k I/O space IOBL_ADR fix on P64H2Daniel Yeisley2007-02-081-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | There's an existing quirk for the kernel to use 1k IO space granularity on the Intel P64H2. It turns out however that pci_setup_bridge() in drivers/pci/setup-bus.c reads in the IO base and limit address register masks it off to the nearest 4k, and writes it back. This causes the kernel to be on 1k boundaries and the hardware to be 4k aligned. The patch below fixes the problem. Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | PCI: quirks.c: cleanupAdrian Bunk2007-02-081-25/+17
|/ | | | | | | | | | | | This patch contains the following cleanups: - move all EXPORT_SYMBOL's directly below the code they are exporting - move all DECLARE_PCI_FIXUP_*'s directly below the functions they are calling Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ahci/pata_jmicron: fix JMicron quirkTejun Heo2007-02-021-2/+2
| | | | | | | | | | | | | | | | | | | For all JMicrons except for 361 and 368, AHCI mode enable bits in the Control(1) should be set. This used to be done in both ahci and pata_jmicron but while moving programming to PCI quirk, it was removed from ahci part while still left in pata_jmicron. The implemented JMicron PCI quirk was incorrect in that it didn't program AHCI mode enable bits. If pata_jmicron is loaded first and programs those bits, the ahci ports work; otherwise, ahci device detection fails miserably. This patch makes JMicron PCI quirk clear SATA IDE mode bits and set AHCI mode bits and remove the respective part from pata_jmicron. Tested on JMB361, 363 and 368. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] via quirk updateJean Delvare2007-02-021-3/+5
| | | | | | | | | | Add special handling for the VT82C686. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Fix VIA quirksJean Delvare2007-01-311-36/+42
| | | | | | | | | | | | | | | | | | Fix VIA quirks that were recently broken by Alan Cox in the upstream kernel (commit 1597cacbe39802d86656d1f2e6329895bd2ef531). My understanding is that pci_find_present() doesn't work yet at the time the quirks are run. So I used a two-step quirk as is done for some other quirks already. First we detect the VIA south bridges and set the right low and high device limits, then we are ready to actually run the quirks on the affected devices. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PCI: Unhide the SMBus on the Asus P4P800-XJean Delvare2007-01-221-0/+5
| | | | | | | | | | | | | Unhide the SMBus on the Asus P4P800-X (and probably some other models of the family.) This gives access to the memory module SPD EEPROMs. Thanks to Winbond for supporting the lm-sensors project with the donation of this motherboard. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] x86-64: pci quirks MODPOST warning fixVivek Goyal2007-01-111-1/+1
| | | | | | | | | | | | | | o MODPOST generates warnings for i386 if kernel is compiled with CONFIG_RELOCATABLE=y WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'asus_hides_smbus_lpc_ich6' (at offset 0xc0217d58) and 'quirk_cardbus_legacy' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'asus_hides_smbus_lpc' (at offset 0xc0217fd9) and 'pci_match_id' o Two quirk functions which are non __init, are accessing data which is of type __init. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
* [PATCH] i2c/pci: fix sis96x smbus quirk once and for allMark M. Hoffman2007-01-091-6/+8
| | | | | | | | | | | | | | | | | | | | The sis96x SMBus PCI device depends on two different quirks to run in a specific order. Apart from being fragile, this was found to actually break on (at least) recent FC4, FC5, and FC6 kernels. This patch fixes the quirks so that they work without relying on the compiler and/or linker to put them in any specific order. http://lists.lm-sensors.org/pipermail/lm-sensors/2006-April/015962.html https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=189719 I tested this patch. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Adrian Bunk <bunk@stusta.de> Cc: Greg K-H <greg@kroah.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* PCI: ATI sb600 sata quirkConke Hu2006-12-201-0/+17
| | | | | | | | Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Be a bit defensive in quirk_nvidia_ck804() so we don't risk ↵Jesper Juhl2006-12-201-0/+2
| | | | | | | | | | | | | | | dereferencing a NULL pdev. pci_get_slot() may return NULL if nothing was found. quirk_nvidia_ck804() does not check the value returned from pci_get_slot(), so it may end up causing a NULL pointer deref. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Fix multiple problems with VIA hardwareAlan Cox2006-12-201-58/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is designed to fix: - Disk eating corruptor on KT7 after resume from RAM - VIA IRQ handling - VIA fixups for bus lockups after resume from RAM The core of this is to add a table of resume fixups run at resume time. We need to do this for a variety of boards and features, but particularly we need to do this to get various critical VIA fixups done on resume. The second part of the problem is to handle VIA IRQ number rules which are a bit odd and need special handling for PIC interrupts. Various patches broke various boxes and while this one may not be perfect (hopefully it is) it ensures the workaround is applied to the right devices only. From: Jean Delvare <khali@linux-fr.org> Now that PCI quirks are replayed on software resume, we can safely re-enable the Asus SMBus unhiding quirk even when software suspend support is enabled. [akpm@osdl.org: fix const warning] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Use pci_find_ht_capability() in drivers/pci/quirks.cMichael Ellerman2006-12-201-12/+16
| | | | | | | | | | | | | Use pci_find_ht_capability() in drivers/pci/quirks.c. I'm pretty sure the logic is unchanged here, but someone please eye-ball it for me. I've changed the message to be a little shorter, it's now: PCI: Found (enabled|disabled) HT MSI mapping on xxxx:xx:xx.x Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI quirks: remove redundant checkDavid Rientjes2006-12-201-2/+1
| | | | | | | | | | Removes redundant check for dev->subordinate; if it is NULL, the function returns before the patch-affected code region. Signed-off-by: David Rientjes <rientjes@cs.washington.edu> Acked-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: quirks: fix the festering mess that claims to handle IDE quirksAlan Cox2006-12-011-56/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The number of permutations of crap we do is amazing and almost all of it has the wrong effect in 2.6. At the heart of this is the PCI SFF magic which says that compatibility mode PCI IDE controllers use ISA IRQ routing and hard coded addresses not the BAR values. The old quirks variously clears them, sets them, adjusts them and then IDE ignores the result. In order to drive all this garbage out and to do it portably we need to handle the SFF rules directly and properly. Because we know the device BAR 0-3 are not used in compatibility mode we load them with the values that are implied (and indeed which many controllers actually thoughtfully put there in this mode anyway). This removes special cases in the IDE layer and libata which now knows that bar 0/1/2/3 always contain the correct address. It means our resource allocation map is accurate from boot, not "mostly accurate" after ide is loaded, and it shoots lots of code. There is also lots more code and magic constant knowledge to shoot once this is in and settled. Been in my test tree for a while both with drivers/ide and with libata. Wants some -mm shakedown in case I've missed something dumb or there are corner cases lurking. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] revert "PCI: quirk for IBM Dock II cardbus controllers"Andrew Morton2006-11-141-27/+0
| | | | | | | | | | | | | | Fix http://bugzilla.kernel.org/show_bug.cgi?id=7264 We need to target this quirk a little more tightly, using the T20 DMI string. Cc: Pavel Kysilka <goldenfish@bsys.cz> Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* PCI: Remove quirk_via_abnormal_poweroffKarsten Wiese2006-10-271-27/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | My K8T800 mobo resumes fine from suspend to ram with and without patch applied against 2.6.18. quirk_via_abnormal_poweroff makes some boards not boot 2.6.18, so IMO patch should go to head, 2.6.18.2 and everywhere "ACPI: ACPICA 20060623" has been applied. Remove quirk_via_abnormal_poweroff Obsoleted by "ACPI: ACPICA 20060623": <snip> Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 </snip> Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Bob Moore <robert.moore@intel.com> Cc: "Brown, Len" <len.brown@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: fix pci_fixup_video as it blows up on sparc64Eiichiro Oiwa2006-10-271-46/+0
| | | | | | | | | | | | This reverts much of the original pci_fixup_video change and makes it work for all arches that need it. fixed, and tested on x86, x86_64 and IA64 dig. Signed-off-by: Eiichiro Oiwa <eiichiro.oiwa.nm@hitachi.com> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert unintentional and bogus change to drivers/pci/quirks.cLinus Torvalds2006-10-231-2/+2
| | | | | | | | | | | | | | | | | | | | In commit 4e8a5201506423e0241202de1349422af4260296 ("[PKT_SCHED] netem: Orphan SKB when adding to queue.") Davem mistakenly also included a temporary diff in his tree that disabled the pci_fixup_video VGA quirk, which broke sparc64. This reverts that part of the commit. Sayeth Davem: "Greg KH has a patch coming to you soon which will move that VGA code back into x86/x86_64/IA64 specific areas and will fix the sparc64 problem properly." Special thanks to Claudio Martins <ctpm@ist.utl.pt> for noticing the error in the first place. Cc: Claudio Martins <ctpm@ist.utl.pt> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PKT_SCHED] netem: Orphan SKB when adding to queue.David S. Miller2006-10-231-2/+2
| | | | | | | | | | | The networking emulator can queue SKBs for a very long time, so if you're using netem on the sender side for large bandwidth/delay product testing, the SKB socket send queue sizes become artificially larger. Correct this by calling skb_orphan() in netem_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
* PCI: quirks: switch quirks code offender to use pci_get APIAlan Cox2006-10-181-1/+2
| | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Turn pci_fixup_video into generic for embedded VGAeiichiro.oiwa.nm@hitachi.com2006-10-181-0/+45
| | | | | | | | | | | | | | | | | | | pci_fixup_video turns into generic code because there are many platforms need this fixup for embedded VGA as well as x86. The Video BIOS integrates into System BIOS on a machine has embedded VGA although embedded VGA generally don't have PCI ROM. As a result, embedded VGA need the way that the sysfs rom points to the Video BIOS of System RAM (0xC0000). PCI-to-PCI Bridge Architecture specification describes the condition whether or not PCI ROM forwards VGA compatible memory address. fixup_video suits this specification. Although the Video ROM generally implements in x86 code regardless of platform, some application such as X Window System can run this code by dosemu86. Therefore, pci_fixup_video should turn into generic code. Signed-off-by: Eiichiro Oiwa <eiichiro.oiwa.nm@hitachi.com> Acked-by: Alan Cox <alan@redhat.com> Acked-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: add ICH7/8 ACPI/GPIO io resource quirksDaniel Ritz2006-10-181-0/+6
| | | | | | | Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: VIA IRQ quirk behaviour changeDaniel Drake2006-10-181-9/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The most recent VIA IRQ quirk changes have broken various VIA devices for some users. We are not able to add these devices to the blacklist as they are also available in PCI-card form, and running the quirk on these devices brings us back to square one (running the VIA quirk on non-VIA boards where the quirk is not needed). This patch, based on suggestions from Sergey Vlasov, implements a scheme similar to but more restrictive than the scheme we had in 2.6.16 and earlier. It runs the quirk on all VIA hardware, but *only* if a VIA southbridge was detected on the system. To further reduce the amount of quirked devices, this patch includes a change suggested by Linus at http://lkml.org/lkml/2005/9/27/113 This ensures that devices bound to non-legacy IO-APIC interrupt lines are not quirked. We have made one change to Linus' suggestion: we do a comparison of ">15" rather than ">=15", as 15 is still in the legacy interrupt range. There is still a downside to this patch: if the user inserts a VIA PCI card into a VIA-based motherboard, in some circumstances the quirk will also run on the VIA PCI card. This corner case is hard to avoid. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI quirks updateAlan Cox2006-10-011-2/+15
| | | | | | | | | | | | | | | | | | | | | | | This fixes two things Firstly someone mistakenly used "errata" for the singular. This causes Dave Woodhouse to emit diagnostics whenever the string is read, and so should be fixed. Secondly the AMD AGP tunnel has an erratum which causes hangs if you try and do direct PCI to AGP transfers in some cases. We have a flag for PCI/PCI failures but we need a different flag for this really as in this case we don't want to stop PCI/PCI transfers using things like IOAT and the new RAID offload work. I'll post some updates to make proper use of the PCIAGP flag in the media/video drivers to Mauro. Signed-off-by: Alan Cox <alan@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* MSI: Blacklist PCI-E chipsets depending on Hypertransport MSI capabilityBrice Goglin2006-09-271-0/+59
| | | | | | | | | | | | | | Introduce msi_ht_cap_enabled() to check the MSI capability in the Hypertransport configuration space. It is used in a generic quirk quirk_msi_ht_cap() to check whether MSI is enabled on hypertransport chipset, and a nVidia specific quirk quirk_nvidia_ck804_msi_ht_cap() where two 2 HT MSI mappings have to be checked. Both quirks set the PCI_BUS_FLAGS_NO_MSI bus flag when MSI is disabled. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* MSI: Cleanup existing MSI quirksBrice Goglin2006-09-271-15/+30
| | | | | | | | | | Move MSI quirks in CONFIG_PCI_MSI, document why the serverworks quirk does not simply set PCI_BUS_FLAGS_NO_MSI, and create a generic quirk for other chipsets where setting PCI_BUS_FLAGS_NO_MSI is fine. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'master' into upstreamJeff Garzik2006-09-041-0/+1
|\
| * USB: Add VIA quirk fixup for VT8235 usb2Mark Hindley2006-09-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Patch to add VIA PCI quirk for Enhanced/Extended USB on VT8235 southbridge. It is needed in order to use EHCI/USB 2.0 with ACPI. Without it IRQs are not routed correctly, you get an "Unlink after no-IRQ?" error and the device is unusable. I belive this could also be a fix for Bugzilla Bug 5835. Signed-off-by: Mark Hindley <mark@hindley.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge /spare/repo/linux-2.6 into upstreamJeff Garzik2006-08-291-1/+58
|\|
| * [PATCH] PCI: fix ICH6 quirksDaniel Ritz2006-08-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - add the ICH6(R) LPC to the ICH6 ACPI quirks. currently only the ICH6-M is handled. [ PCI_DEVICE_ID_INTEL_ICH6_1 is the ICH6-M LPC, ICH6_0 is the ICH6(R) ] - remove the wrong quirk calling asus_hides_smbus_lpc() for ICH6. the register modified in asus_hides_smbus_lpc() has a different meaning in ICH6. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| *-. Merge trivial low-risk suspend hotkey bugzilla-5918 into releaseLen Brown2006-08-211-0/+57
| |\ \
| | | * PCI: quirk to disable e100 interrupt if RESET failed toBjorn Helgaas2006-07-261-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this quirk, e100 can be pulling on a shared interrupt line when another device (eg. USB) loads, causing the interrupt to scream and get disabled. http://bugzilla.kernel.org/show_bug.cgi?id=5918 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | | | [PATCH] libata: s/CONFIG_SCSI_SATA/CONFIG_[S]ATA/g in pci/quirks.cTejun Heo2006-08-191-3/+3
|/ / / | | | | | | | | | | | | | | | | | | | | | drivers/pci/quirks.c was not updated when libata config constants were renamed braking several libata quirks. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | / PCI: Unhide the SMBus on Asus PU-DLSJean Delvare2006-08-031-0/+7
| |/ |/| | | | | | | | | | | | | | | Unhide the SMBus controller on the Asus PU-DLS board. This fixes bug #6763. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] PCI: PCIE power management quirkKristen Carlson Accardi2006-07-131-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When changing power states from D0->DX and then from DX->D0, some Intel PCIE chipsets will cause a device reset to occur. This will cause problems for any D State other than D3, since any state information that the driver will expect to be present coming from a D1 or D2 state will have been cleared. This patch addes a flag to the pci_dev structure to indicate that devices should not use states D1 or D2, and will set that flag for the affected chipsets. This patch also modifies pci_set_power_state() so that when a device driver tries to set the power state on a device that is downstream from an affected chipset, or on one of the affected devices it only allows state changes to or from D0 & D3. In addition, this patch allows the delay time between D3->D0 to be changed via a quirk. These chipsets also need additional time to change states beyond the normal 10ms. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] PCI: Clear abnormal poweroff flag on VIA southbridges, fix resumeMatthew Garrett2006-07-131-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some VIA southbridges contain a flag in the ACPI register space that indicates whether an abnormal poweroff has occured, presumably with the intention that it can be cleared on clean shutdown. Some BIOSes check this flag at resume time, and will re-POST the system rather than jump back to the OS if it's set. Clearing it at boot time appears to be sufficient. I'm not sure if drivers/pci/quirks.c is the right place to do it, but I'm not sure where would be cleaner. [akpm@osdl.org: cleanups, build fix] Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg KH <greg@kroah.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Yu, Luming" <luming.yu@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] ide: fix Jmicron supportAlan Cox2006-07-121-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to 2.6.18rc1 you could install with devices on a JMicron chipset using the "all-generic-ide" option. As of this kernel the AHCI driver grabs the controller and rams it into AHCI mode losing the PATA ports and making CD drives and the like vanish. The all-generic-ide option fails because the AHCI driver grabbed the PCI device and reconfigured it. To fix this three things are needed. #1 We must put the chip into dual function mode #2 The AHCI driver must grab only function 0 (already in your rc1 tree) #3 Something must grab the PATA ports The attached patch is the minimal risk edition of this. It puts the chip into dual function mode so that AHCI will grab the SATA ports without losing the PATA ports. To keep the risk as low as possible the third patch adds the PCI identifiers for the PATA port and the FN check to the ide-generic driver. There is a more featured jmicron driver on its way but that adds risk and the ide-generic support is sufficient to install and run a system. The actual chip setup done by the quirk is the precise setup recommended by the vendor. (The JMB368 appears only in the ide-generic entry as it has no AHCI so does not need the quirk) Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Add PIIX4 APCI quirk for the 440MX chipset tooLinus Torvalds2006-07-121-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is confirmed to fix a hang due to PCI resource conflicts with setting up the Cardbus bridge on old laptops with the 440MX chipsets. Original report by Alessio Sangalli, lspci debugging help by Pekka Enberg, and trial patch suggested by Daniel Ritz: "From the docs available i would _guess_ this thing is really similar to the 82443BX/82371AB combination. at least the SMBus base address register is hidden at the very same place (32bit at 0x90 in function 3 of the "south" brigde)" The dang thing is largely undocumented, but the patch was corroborated by Asit Mallick: "I am trying to find the register information. 440MX is an integration of 440BX north-bridge without AGP and PIIX4E (82371EB). PIIX4 quirk should cover the ACPI and SMBus related I/O registers." and verified to fix the problem by Alessio. Cc: Daniel Ritz <daniel.ritz-ml@swissonline.ch> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Tested-by: Alessio Sangalli <alesan@manoweb.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-301-1/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 03:31:28 +0100