summaryrefslogtreecommitdiffstats
path: root/drivers/phy/Kconfig (follow)
Commit message (Collapse)AuthorAgeFilesLines
* phy: usb: Add USB2.0 phy driver for Sunplus SP7021Vincent Shih2022-09-021-0/+1
| | | | | | | | | Add USB2.0 phy driver for Sunplus SP7021 Signed-off-by: Vincent Shih <vincent.sunplus@gmail.com> Link: https://lore.kernel.org/r/1658717052-26142-2-git-send-email-vincent.sunplus@gmail.com [vkoul: remove trailing line in driver file] Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: phy-can-transceiver: Add support for setting muxAswath Govindraju2022-04-111-0/+1
| | | | | | | | | | On some boards, for routing CAN signals from controller to transceiver, muxes might need to be set. Therefore, add support for setting the mux by reading the mux-states property from the device tree node. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20220408111316.21189-1-a-govindraju@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: pistachio-usb: Depend on MIPS || COMPILE_TESTJiaxun Yang2021-08-121-1/+1
| | | | | | | | So it will be avilable for generic MIPS kernel. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
* phy: phy-can-transceiver: Add support for generic CAN transceiver driverAswath Govindraju2021-06-141-0/+9
| | | | | | | | | | | | | | | The driver adds support for generic CAN transceivers. Currently the modes supported by this driver are standby and normal modes for TI TCAN1042 and TCAN1043 CAN transceivers. The transceiver is modelled as a phy with pins controlled by gpios, to put the transceiver in various device functional modes. It also gets the phy attribute max_link_rate for the usage of CAN drivers. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20210510051006.11393-4-a-govindraju@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: Add Sparx5 ethernet serdes PHY driverSteen Hegelund2021-03-171-0/+1
| | | | | | | | | | | | Add the Microchip Sparx5 ethernet serdes PHY driver for the 6G, 10G and 25G interfaces available in the Sparx5 SoC. Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210218161451.3489955-4-steen.hegelund@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: USB_LGM_PHY should depend on X86Geert Uytterhoeven2021-02-041-0/+1
| | | | | | | | | | | | The Intel Lightning Mountain (LGM) USB3 USB is only present on Intel Lightning Mountain SoCs. Hence add a dependency on X86, to prevent asking the user about this driver when configuring a kernel without Intel Lightning Mountain platform support. Fixes: 1cce8f73a561c944 ("phy: Add USB3 PHY support for Intel LGM SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210129131753.2656306-1-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
* PHY: Ingenic: Add USB PHY driver using generic PHY framework.周琰杰 (Zhou Yanjie)2020-12-051-0/+1
| | | | | | | | | | | | | | | Used the generic PHY framework API to create the PHY, this driver supoorts USB OTG PHY used in JZ4770 SoC, JZ4775 SoC, JZ4780 SoC, X1000 SoC, X1830 SoC and X2000 SoC. Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201116141906.11758-4-zhouyanjie@wanyeetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: fix USB_LGM_PHY warning & build errorsRandy Dunlap2020-09-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | Fix a Kconfig warning that is causing lots of build errors when USB_SUPPORT is not set. USB_PHY depends on USB_SUPPORT but "select" doesn't care about dependencies, so this driver should also depend on USB_SUPPORT. It should not select USB_SUPPORT. WARNING: unmet direct dependencies detected for USB_PHY Depends on [n]: USB_SUPPORT [=n] Selected by [m]: - USB_LGM_PHY [=m] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Li Yin <yin1.li@intel.com> Cc: Vadivel Murugan R <vadivel.muruganx.ramuthevar@linux.intel.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/d1dd0ddd-3143-5777-1c63-195e1a32f237@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: Add USB3 PHY support for Intel LGM SoCRamuthevar Vadivel Murugan2020-09-111-0/+10
| | | | | | | | | Add support for USB PHY on Intel LGM SoC. Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20200828022312.52724-3-vadivel.muruganx.ramuthevar@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit TransceiverAnurag Kumar Vulisha2020-06-291-0/+1
| | | | | | | | | | | | Xilinx ZynqMP SoCs have a Gigabit Transceiver with four lanes. All the high speed peripherals such as USB, SATA, PCIE, Display Port and Ethernet SGMII can rely on any of the four GT lanes for PHY layer. This patch adds driver for that ZynqMP GT core. Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200629120054.29338-3-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* phy: intel-lgm-emmc: Add support for eMMC PHYRamuthevar Vadivel Murugan2020-01-141-0/+1
| | | | | | | | Add support for eMMC PHY on Intel's Lightning Mountain SoC. Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2019-05-211-0/+1
| | | | | | | | | | | | | | Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* phy: dphy: Add configuration helpersMaxime Ripard2018-12-121-0/+8
| | | | | | | | | | The MIPI D-PHY spec defines default values and boundaries for most of the parameters it defines. Introduce helpers to help drivers get meaningful values based on their current parameters, and validate the boundaries of these parameters if needed. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: add driver for Freescale i.MX8MQ USB3 PHYLi Jun2018-12-121-0/+1
| | | | | | | | This is a cleaned up port of the downstream i.MX8MQ USB3 PHY driver. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Merge tag 'usb-4.20-rc1' of ↵Linus Torvalds2018-10-261-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver patches for 4.20-rc1 Lots of USB changes in here, primarily in these areas: - typec updates and new drivers - new PHY drivers - dwc2 driver updates and additions (this old core keeps getting added to new devices.) - usbtmc major update based on the industry group coming together and working to add new features and performance to the driver. - USB gadget additions for new features - USB gadget configfs updates - chipidea driver updates - other USB gadget updates - USB serial driver updates - renesas driver updates - xhci driver updates - other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits) usb: phy: ab8500: silence some uninitialized variable warnings usb: xhci: tegra: Add genpd support usb: xhci: tegra: Power-off power-domains on removal usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten usbip: tools: fix atoi() on non-null terminated string USB: misc: appledisplay: fix backlight update_status return code phy: phy-pxa-usb: add a new driver usb: host: add DT bindings for faraday fotg2 usb: host: ohci-at91: fix request of irq for optional gpio usb/early: remove set but not used variable 'remain_length' usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc usb: typec: tcpm: Report back negotiated PPS voltage and current USB: core: remove set but not used variable 'udev' usb: core: fix memory leak on port_dev_path allocation USB: net2280: Remove ->disconnect() callback from net2280_pullup() usb: dwc2: disable power_down on rockchip devices usb: gadget: udc: renesas_usb3: add support for r8a77990 dt-bindings: usb: renesas_usb3: add bindings for r8a77990 usb: gadget: udc: renesas_usb3: Add r8a774a1 support USB: serial: cypress_m8: remove set but not used variable 'iflag' ...
| * phy: socionext: add USB3 PHY driver for UniPhier SoCKunihiko Hayashi2018-09-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | Add a driver for PHY interface built into USB3 controller implemented in UniPhier SoCs. This driver supports High-Speed PHY and Super-Speed PHY. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Motoya Tanigawa <tanigawa.motoya@socionext.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * phy: Add driver for Cadence MHDP DisplayPort SD0801 PHYScott Telford2018-09-101-0/+1
| | | | | | | | | | | | | | | | | | | | Add driver for the Cadence SD0801 "Torrent" PHY used with the Cadence MHDP DisplayPort Tx controller. Integration with the MHDP driver will be the subject of another commit. Signed-off-by: Scott Telford <stelford@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: add driver for Microsemi Ocelot SerDes muxingQuentin Schulz2018-10-051-0/+1
|/ | | | | | | | | | The Microsemi Ocelot can mux SerDes lanes (aka macros) to different switch ports or even make it act as a PCIe interface. This adds support for the muxing of the SerDes. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch '4.14-features' of ↵Linus Torvalds2017-09-161-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
| * phy: Add an USB PHY driver for the Lantiq SoCs using the RCU moduleHauke Mehrtens2017-09-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver starts the DWC2 core(s) built into the XWAY SoCs and provides the PHY interfaces for each core. The phy instances can be passed to the dwc2 driver, which already supports the generic phy interface. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Rob Herring <robh@kernel.org> Cc: martin.blumenstingl@googlemail.com Cc: john@phrozen.org Cc: andy.shevchenko@gmail.com Cc: p.zabel@pengutronix.de Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17127/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | phy: ralink-usb: add driver for Mediatek/RalinkJohn Crispin2017-08-201-0/+1
| | | | | | | | | | | | | | | | | | | | Add a driver to setup the USB phy on Mediatek/Ralink SoCs. The driver sets up power and host mode, but also needs to configure PHY registers for the MT7628 and MT7688. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: phy-mt65xx-usb3: add mediatek directory and rename fileChunfeng Yun2017-08-201-8/+1
|/ | | | | | | | | | | | | The driver is actually for T-PHY which supports USB3.0, PCIe and SATA, and supports more SoCs now, but not just only for series of mt65xx SoCs, so the name of file, data struct, functions etc with 'mt65xx' may cause misunderstanding when new SoCs are supported. Here rename them to reflect the real functions and also enhance readability. And also update MAINTAINERS file to reflect the correct driver Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: cpcap-usb: Add CPCAP PMIC USB supportTony Lindgren2017-06-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Motorola phones like droid 4 use a custom CPCAP PMIC that has a multiplexing USB PHY. This USB PHY can operate at least in four modes using pin multiplexing and two control GPIOS: - Pass through companion PHY for the SoC USB PHY - ULPI PHY for the SoC - Pass through USB for the modem - UART debug console for the SoC This patch adds support for droid 4 USB PHY and debug UART modes, support for other modes can be added later on as needed. Both peripheral and host mode are working for the USB. The host mode depends on the cpcap-charger driver for VBUS. VBUS and ID pin detection are done using cpcap-adc IIO ADC driver. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: Group vendor specific phy driversVivek Gautam2017-06-011-480/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: qcom-qusb2: add NVMEM dependencyTobias Regnery2017-04-101-0/+1
| | | | | | | | | | | | | | | | | | | With CONFIG_NVMEM=m and CONFIG_PHY_QCOM_QUSB2=y we get a link error from calls to devm_nvmem_cell_get and nvmem_cell_read: drivers/built-in.o: In function `qusb2_phy_probe': binder.c:(.text+0x4750): undefined reference to `devm_nvmem_cell_get' drivers/built-in.o: In function `qusb2_phy_init': binder.c:(.text+0x489c): undefined reference to `nvmem_cell_read' Fix this by adding a Kconfig dependency to ensure we can only have this driver built in when the nvmem functions are also built in or we see the empty stub functions. We can still build this driver as a module when the nvmem core is build as module, too. Fixes: deffad633413 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips") Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: qcom-qmp: new qmp phy driver for qcom-chipsetsVivek Gautam2017-04-101-0/+8
| | | | | | | | | | | | Qualcomm SOCs have QMP phy controller that provides support to a number of controller, viz. PCIe, UFS, and USB. Add a new driver, based on generic phy framework, for this phy controller. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chipsVivek Gautam2017-04-101-0/+10
| | | | | | | | | | PHY transceiver driver for QUSB2 phy controller that provides HighSpeed functionality for DWC3 controller present on Qualcomm chipsets. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: qcom-usb-hs: Add depends on EXTCONStephen Boyd2017-03-091-0/+1
| | | | | | | | | | | | | | | | | | | | We get the following compile errors if EXTCON is enabled as a module but this driver is builtin: drivers/built-in.o: In function `qcom_usb_hs_phy_power_off': phy-qcom-usb-hs.c:(.text+0x1089): undefined reference to `extcon_unregister_notifier' drivers/built-in.o: In function `qcom_usb_hs_phy_probe': phy-qcom-usb-hs.c:(.text+0x11b5): undefined reference to `extcon_get_edev_by_phandle' drivers/built-in.o: In function `qcom_usb_hs_phy_power_on': phy-qcom-usb-hs.c:(.text+0x128e): undefined reference to `extcon_get_state' phy-qcom-usb-hs.c:(.text+0x12a9): undefined reference to `extcon_register_notifier' so let's mark this as needing to follow the modular status of the extcon framework. Fixes: 9994a33865f4 e2427b09ba929c2b9 (phy: Add support for Qualcomm's USB HS phy") Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Revert "phy: Add USB3 PHY support for Broadcom NSP SoC"Rafał Miłecki2017-03-091-8/+0
| | | | | | | | | | | | | | | | This reverts commit d7bc1a7d41bf ("phy: Add USB3 PHY support for Broadcom NSP SoC") as we already have driver for this PHY (shared by NS and NSP). It was added in commit e5666281d9ea ("phy: bcm-ns-usb3: new driver for USB 3.0 PHY on Northstar"). Instead of adding separated driver & duplicating code we should work on improving existing (old) one. Thanks to work done by Broadcom we know there is MDIO bus we weren't aware of & we know register names which makes initialization more clear. This is very valuable info and we should work on using it in existing driver afterwards. Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Merge tag 'pci-v4.11-changes' of ↵Linus Torvalds2017-02-231-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...
| * phy: phy-exynos-pcie: Add support for Exynos PCIe PHYJaehoon Chung2017-02-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Generic PHY framework about Exynos SoCs. Current Exynos PCIe driver doesn't use the PHY framework, which makes it difficult to upstream the other Exynos variants because of different PHY registers. Move the codes relevant to PHY from Exnyos PCIe driver to PHY Exynos PCIe driver. [bhelgaas: depend on "OF && (ARCH_EXYNOS || COMPILE_TEST)", update copyright year, both per Vivek] Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Jingoo Han <jingoohan1@gmail.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | phy: fix rockchip-inno-usb2 build errorsRandy Dunlap2017-01-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix build errors in phy-rockchip-inno-usb2.c. The driver uses extcon interfaces so it should depend on EXTCON. Fixes these build errors: drivers/built-in.o: In function `rockchip_usb2phy_otg_sm_work': phy-rockchip-inno-usb2.c:(.text+0x2bcb): undefined reference to `extcon_get_state' phy-rockchip-inno-usb2.c:(.text+0x2cd4): undefined reference to `extcon_set_state_sync' phy-rockchip-inno-usb2.c:(.text+0x2cec): undefined reference to `extcon_set_state_sync' phy-rockchip-inno-usb2.c:(.text+0x2d2d): undefined reference to `extcon_get_state' drivers/built-in.o: In function `rockchip_usb2phy_probe': phy-rockchip-inno-usb2.c:(.text+0x31d7): undefined reference to `extcon_get_edev_by_phandle' phy-rockchip-inno-usb2.c:(.text+0x321a): undefined reference to `devm_extcon_dev_allocate' phy-rockchip-inno-usb2.c:(.text+0x3230): undefined reference to `devm_extcon_dev_register' phy-rockchip-inno-usb2.c:(.text+0x375a): undefined reference to `extcon_register_notifier' Found in linux-next but is also needed in mainline. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: Add USB3 PHY support for Broadcom NSP SoCYendapally Reddy Dhananjaya Reddy2017-01-271-0/+8
| | | | | | | | | | | | | | | | This patch adds support for Broadcom NSP USB3 PHY Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: Add support for Qualcomm's USB HS phyStephen Boyd2017-01-271-0/+8
| | | | | | | | | | | | | | | | | | | | | | The high-speed phy on qcom SoCs is controlled via the ULPI viewport. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: <devicetree@vger.kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: Add support for Qualcomm's USB HSIC phyStephen Boyd2017-01-271-0/+7
|/ | | | | | | | | | | The HSIC USB controller on qcom SoCs has an integrated all digital phy controlled via the ULPI viewport. Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Rob Herring <robh@kernel.org> Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: rockchip-inno-usb2: select USB_COMMONArnd Bergmann2016-11-181-0/+2
| | | | | | | | | | | | | | | | | When USB is disabled, we get a link error for this driver because of the added OTG support drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_otg_sm_work': phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_otg_sm_work+0x1f4): undefined reference to `usb_otg_state_string' drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_probe': phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_probe+0x2c8): undefined reference to `of_usb_get_dr_mode_by_phy' Other phy drivers select USB_COMMON for this, so let's do the same here. Fixes: 0c42fe48fd23 ("phy: rockchip-inno-usb2: support otg-port for rk3399") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: stih41x-usb: Remove usb phy driver and dt bindingPeter Griffin2016-11-181-8/+0
| | | | | | | | | | | documentation. This phy is only used on STiH415/6 based silicon, and support for these SoC's is being removed from the kernel. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: phy-miphy365x: Remove miphy365 driver and dt bindingPeter Griffin2016-11-181-10/+0
| | | | | | | | | | | documentation. This phy is only used on STiH415/6 based silicon, and support for these SoC's is being removed from the kernel. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: meson: add USB2 PHY support for Meson8b and GXBBMartin Blumenstingl2016-11-181-0/+13
| | | | | | | | | This is a new driver for the USB PHY found in Meson8b and GXBB SoCs. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* usb: phy: add USB_SUPPORT dependencyArnd Bergmann2016-09-101-0/+2
| | | | | | | | | | | | | | | | | | | The driver now calls of_usb_get_dr_mode_by_phy, which is part of the USB core layer, and it fails to build when that is not provided: drivers/phy/phy-sun4i-usb.o: In function `sun4i_usb_phy_probe': phy-sun4i-usb.c:(.text.sun4i_usb_phy_probe+0x140): undefined reference to `of_usb_get_dr_mode_by_phy' We already have a couple of other PHY drivers with a dependency on USB_SUPPORT, so that seems to be the easiest fix here. An alternative would be to adjust the #ifdef in include/linux/usb/of.h to also check for CONFIG_USB_SUPPORT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Fixes: b33ecca87df9 ("phy-sun4i-usb: Add support for peripheral-only mode") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: Add USB Type-C PHY driver for rk3399Chris Zhong2016-09-101-0/+9
| | | | | | | | | | | | | | Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB Type-C PHY is designed to support the USB3 and DP applications. The USB3 operates in SuperSpeed mode and the DP can operate at RBR, HBR and HBR2 data rates. This driver create 2 PHY devices separately for USB3 and DisplyPort, and registers them under the child node. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Tested-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: rockchip-inno-usb2: add COMMON_CLK dependencyFrank Wang2016-09-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | On kernel builds without COMMON_CLK, the newly added rockchip-inno-usb2 driver fails to build: drivers/phy/phy-rockchip-inno-usb2.c:124:16: error: field 'clk480m_hw' has incomplete type struct clk_hw clk480m_hw; In file included from include/linux/clk.h:16:0 from drivers/phy/phy-rockchip-inno-usb2.c:17: include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] const typeof( ((type *)0)->member ) *__mptr = (ptr); \ ... ... Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
* phy: add a driver for the Rockchip SoC internal PCIe PHYShawn Lin2016-09-101-0/+8
| | | | | | | | | This patch to add a generic PHY driver for rockchip PCIe PHY. Access the PHY via registers provided by GRF (general register files) module. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phyFrank Wang2016-09-101-0/+7
| | | | | | | | | | | | | | The newer SoCs (rk3366, rk3399) take a different usb-phy IP block than rk3288 and before, and most of phy-related registers are also different from the past, so a new phy driver is required necessarily. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Suggested-by: Heiko Stuebner <heiko@sntech.de> Suggested-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* phy: bcm-ns-usb3: new driver for USB 3.0 PHY on NorthstarRafał Miłecki2016-09-101-0/+9
| | | | | | | | | | | | | | | | Northstar is a family of SoCs used in home routers. They have USB 2.0 and 3.0 controllers with PHYs that need to be properly initialized. This driver provides PHY init support in a generic way and can be bound with XHCI controller driver. There aren't any public datasheets from Broadcom so we can't have nice defines for all used bits. It means we just follow Broadcom's initialization procedure using their magic values. We were quite lucky actually that Broadcom put some comments in their SDK reference code explaining what given writes are responsible for. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2016-07-271-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ...
| * phy: Add Northstar2 PCI Phy supportPramod Kumar2016-06-111-0/+8
| | | | | | | | | | | | | | | | | | | | | | Add PCI Phy support for Broadcom Northstar2 SoCs. This driver uses the interface from the iproc mdio mux driver to enable the devices respective phys. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'phy-for-4.8-rc1' of ↵Greg Kroah-Hartman2016-07-141-0/+10
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing Kishon writes: phy: for 4.8 -rc1 *) Add a new phy_ops for setting the phy mode *) Add a new phy driver for DA8xx SoC USB PHY *) Minor fixes and cleanups Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * | phy: da8xx-usb: new driver for DA8xx SoC USB PHYDavid Lechner2016-07-041-0/+10
| |/ | | | | | | | | | | | | | | | | This is a new phy driver for the SoC USB controllers on the TI DA8xx family of microcontrollers. The USB 1.1 PHY is just a simple on/off. The USB 2.0 PHY also allows overriding the VBUS and ID pins. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* / usb: gadget: move gadget API functions to udc-coreFelipe Balbi2016-06-211-0/+1
|/ | | | | | | | | | | | | | | | | instead of defining all functions as static inlines, let's move them to udc-core and export them with EXPORT_SYMBOL_GPL, that way we can make sure that only GPL drivers will use them. As a side effect, it'll be nicer to add tracepoints to the gadget API. While at that, also fix Kconfig dependencies to avoid randconfig build failures. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 18:28:27 +0100