summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl (follow)
Commit message (Collapse)AuthorAgeFilesLines
* pinctrl: single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffsKeerthy2016-04-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | pcs_parse_bits_in_pinctrl_entry uses ffs which gives bit indices ranging from 1 to MAX. This leads to a corner case where we try to request the pin number = MAX and fails. bit_pos value is being calculted using ffs. pin_num_from_lsb uses bit_pos value. pins array is populated with: pin + pin_num_from_lsb. The above is 1 more than usual bit indices as bit_pos uses ffs to compute first set bit. Hence the last of the pins array is populated with the MAX value and not MAX - 1 which causes error when we call pin_request. mask_pos is rightly calculated as ((pcs->fmask) << (bit_pos - 1)) Consequently val_pos and submask are correct. Hence use __ffs which gives (ffs(x) - 1) as the first bit set. fixes: 4e7e8017a8 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules") Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: mediatek: correct debounce time unit in mtk_gpio_set_debounceYingjoe Chen2016-04-151-4/+5
| | | | | | | | | | | | | | | | | The debounce time unit for gpio_chip.set_debounce is us but mtk_gpio_set_debounce regard it as ms. Fix this by correct debounce time array dbnc_arr so it can find correct debounce setting. Debounce time for first debounce setting is 500us, correct this as well. While I'm at it, also change the debounce time array name to "debounce_time" for readability. Cc: stable@vger.kernel.org Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: imx: Kconfig: PINCTRL_IMX select REGMAPAlexander Kurz2016-04-141-0/+1
| | | | | | | | | | | Regmap functionality has been integrated into pinctrl-imx.c with commit 8626ada8 which might trigger build failures when regmap is not selected otherwise. Hence, make Kconfig aware about this new dependency. Signed-off-by: Alexander Kurz <akurz@blala.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Revert "Revert "pinctrl: lantiq: Implement gpio_chip.to_irq""Linus Walleij2016-04-011-0/+17
| | | | This reverts commit 446f59acb70b70a425ea4105277a71eb615327cd.
* pinctrl: qcom: ipq4019: fix register offsetsMatthew McClintock2016-03-311-5/+5
| | | | | | | | | For this SoC the register offsets changed from previous versions to be separated by a larger amount. Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Acked-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: qcom: ipq4019: fix the function enum for gpio modeMatthew McClintock2016-03-311-1/+1
| | | | | | | | | Without this, we would fail to set the mode to gpio if trying to configure for that mode Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Acked-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: qcom: ipq4019: set ngpios to correct valueMatthew McClintock2016-03-311-1/+1
| | | | | | | | | This should have been bumped to 100 when the extra pins were added in the original pinctrl patch Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Acked-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: nomadik: fix pull debug print inversionLinus Walleij2016-03-311-1/+1
| | | | | | | Pull up was reported as pull down and vice versa. Fix this. Fixes: 8f1774a2a971 "pinctrl: nomadik: improve GPIO debug prints" Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: implement gpio_irq_enableQi Zheng2016-03-301-0/+30
| | | | | | | | | | | | | | There is unexpected gpio interrupt after irq_enable. If not implemeted gpio_irq_enable callback, irq_enable calls irq_unmask instead. But if there was interrupt set before the irq_enable, unmask it may trigger the unexpected interrupt. By implementing the gpio_irq_enable callback, do interrupt status ack, the issue has gone. Signed-off-by: Qi Zheng <qi.zheng@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: intel: make the high level interrupt workingQipeng Zha2016-03-301-2/+3
| | | | | | | | | | | High level trigger mode of GPIO interrupt is not set correctly in intel_gpio_irq_type(), and will make this kind of interrupt not respond. Signed-off-by: Qi Zheng <qi.zheng@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: freescale: imx: fix bogus check of of_iomap() return valueVladimir Zapolskiy2016-03-301-9/+8
| | | | | | | | | | | | | On error path of_iomap() returns NULL, hence IS_ERR() check is invalid and may cause a NULL pointer dereference, the change fixes this problem. While we are here invert a device node check to simplify the code. Fixes: 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Fix A33 external interrupts not workingHans de Goede2016-03-303-17/+22
| | | | | | | | | | | | | | | | | | | | | | | | | pinctrl-sun8i-a33.c (and the dts) declare only 2 interrupt banks, where as the closely related a23 has 3 banks. This matches with the datasheet for the A33 where only interrupt banks B and G are specified where as the A23 has banks A, B and G. However the A33 being the A23 derative it is means that the interrupt configure/status io-addresses for the 2 banks it has are not changed from the A23, iow they have the same address as if bank A was still present. Where as the sunxi pinctrl currently tries to use the A23 bank A addresses for bank B, since the pinctrl code does not know about the removed bank A. Add a irq_bank_base parameter and use this where appropriate to take the missing bank A into account. This fixes external interrupts not working on the A33 (tested with an i2c touchscreen controller which uses an external interrupt). Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: pistachio: fix mfio84-89 function description and pinmux.Govindraj Raja2016-03-301-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | mfio 84 to 89 are described wrongly, fix it to describe the right pin and add them to right pin-mux group. The correct order is: pll1_lock => mips_pll -- MFIO_83 pll2_lock => audio_pll -- MFIO_84 pll3_lock => rpu_v_pll -- MFIO_85 pll4_lock => rpu_l_pll -- MFIO_86 pll5_lock => sys_pll -- MFIO_87 pll6_lock => wifi_pll -- MFIO_88 pll7_lock => bt_pll -- MFIO_89 Cc: linux-gpio@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: James Hartley <James.Hartley@imgtec.com> Cc: <stable@vger.kernel.org> # v4.2+ Fixes: cefc03e5995e("pinctrl: Add Pistachio SoC pin control driver") Signed-off-by: Govindraj Raja <Govindraj.Raja@imgtec.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sh-pfc: only use dummy states for non-DT platformsWolfram Sang2016-03-301-1/+3
| | | | | | | | | | | | | | | | | | | If pinctrl_provide_dummies() is used unconditionally, then the dummy state will be used even on DT platforms when the "init" state was intentionally left out. Instead of "default", the dummy "init" state will then be used during probe. Thus, when probing an I2C controller on cold boot, communication triggered by bus notifiers broke because the pins were not initialized. Do it like OMAP2: use the dummy state only for non-DT platforms. Cc: stable@vger.kernel.org Fixes: ef0eebc05130 ("drivers/pinctrl: Add the concept of an "init" state") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge branch 'akpm' (patches from Andrew)Linus Torvalds2016-03-191-10/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge second patch-bomb from Andrew Morton: - a couple of hotfixes - the rest of MM - a new timer slack control in procfs - a couple of procfs fixes - a few misc things - some printk tweaks - lib/ updates, notably to radix-tree. - add my and Nick Piggin's old userspace radix-tree test harness to tools/testing/radix-tree/. Matthew said it was a godsend during the radix-tree work he did. - a few code-size improvements, switching to __always_inline where gcc screwed up. - partially implement character sets in sscanf * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) sscanf: implement basic character sets lib/bug.c: use common WARN helper param: convert some "on"/"off" users to strtobool lib: add "on"/"off" support to kstrtobool lib: update single-char callers of strtobool() lib: move strtobool() to kstrtobool() include/linux/unaligned: force inlining of byteswap operations include/uapi/linux/byteorder, swab: force inlining of some byteswap operations include/asm-generic/atomic-long.h: force inlining of some atomic_long operations usb: common: convert to use match_string() helper ide: hpt366: convert to use match_string() helper ata: hpt366: convert to use match_string() helper power: ab8500: convert to use match_string() helper power: charger_manager: convert to use match_string() helper drm/edid: convert to use match_string() helper pinctrl: convert to use match_string() helper device property: convert to use match_string() helper lib/string: introduce match_string() helper radix-tree tests: add test for radix_tree_iter_next radix-tree tests: add regression3 test ...
| * pinctrl: convert to use match_string() helperAndy Shevchenko2016-03-171-10/+3
| | | | | | | | | | | | | | | | | | | | The new helper returns index of the mathing string in an array. We would use it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge tag 'gpio-v4.6-1' of ↵Linus Torvalds2016-03-183-39/+16
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ...
| * pinctrl: cygnus-gpio: use gpiochip data pointerLinus Walleij2016-02-191-19/+14
| | | | | | | | | | | | | | | | | | | | | | | | This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: bcm-kernel-feedback-list@broadcom.com Cc: Scott Branden <sbranden@broadcom.com> Cc: Jon Mason <jonmason@broadcom.com> Acked-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * pinctrl: sirf/atlas7: stop poking around in GPIO internalsLinus Walleij2016-02-161-18/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This code is poking around in the gpio_chip:s internal structures to achieve some kind of pin to GPIO mappings. - It is wrong to poke around in these structs and the pinctrl maintainer was stupid to let it pass unnoticed, mea culpa. - The right interface to use is gpiochip_add_pin_range() - The code appears unused: the pin control part of the driver is not adding any ranges, so we're iterating over an empty list. Maybe it is poking around in some other pin controllers GPIO ranges, and that's just totally wrong, again use gpiochip_add_pin_range() and specify the right pin controller. Cc: Barry Song <baohua@kernel.org> Cc: Guoying Zhang <Guoying.Zhang@csr.com> Cc: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio/pinctrl: sunxi: stop poking around in private varsLinus Walleij2016-02-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This kind of hacks disturbs the refactoring of the gpiolib. The descriptor table belongs to the gpiolib, if we want to know something about something in it, use or define the proper accessor functions. Let's add this gpiochip_lins_is_irq() to do what the sunxi driver is trying at so we can privatize the descriptors properly. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: single: Use a separate lockdep classSudeep Holla2016-03-111-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The single pinmux controller can be cascaded to the other interrupt controllers. Hence when propagating wake-up settings to its parent interrupt controller, there's possiblity of detecting possible recursive locking and getting lockdep warning. This patch avoids this false positive by using a separate lockdep class for this single pinctrl interrupts. Cc: linux-gpio@vger.kernel.org Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | drivers: pinctrl: add driver for Allwinner A64 SoCAndre Przywara2016-03-113-0/+606
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the Allwinner A64 user manual and on the previous sunxi pinctrl drivers this introduces the pin multiplex assignments for the ARMv8 Allwinner A64 SoC. Port A is apparently used for the fixed function DRAM controller, so the ports start at B here (the manual mentions "n from 1 to 7", so not starting at 0). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge tag 'v4.5-rc5' into develLinus Walleij2016-03-105-18/+47
|\ \ | | | | | | | | | Linux 4.5-rc5
| * | pinctrl: samsung: fix SMP race conditionYoungmin Nam2016-02-151-13/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, samsung_gpio_drection_in/output function were not covered with a spinlock. For example, samsung_gpio_direction_output function consists of two functions. 1. samsung_gpio_set 2. samsung_gpio_set_direction When 2 CPUs try to control the same gpio pin heavily, (situation like i2c control with gpio emulation) This situation can cause below problem. CPU 0 | CPU1 | samsung_gpio_direction_output | samsung_gpio_set(pin A as 1) | samsung_gpio_direction_output | samsung_gpio_set(pin A as 0) samsung_gpio_set_direction | | samsung_gpio_set_direction The initial value of pin A will be set as 0 while we wanted to set pin A as 1. This patch modifies samsung_gpio_direction_in/output function to be done in one spinlock to fix race condition. Additionally, the new samsung_gpio_set_value was added to implement gpio set callback(samsung_gpio_set) with spinlock using this function. Cc: stable@vger.kernel.org Signed-off-by: Youngmin Nam <ym0914@gmail.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | pinctrl: mvebu: fix num_settings in mpp group assignmentSebastian Hesselbarth2016-02-131-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When assigning mpp settings from static mpp modes to mpp groups, we do not want any groups that have no supported setting for a specific Kirkwood variant. However, when there is at least a single supported setting, we need to assign the number of all settings in this mode to grp->num_settings as we are reusing the static modes table. Fixes: 0581b16b1840 ("pinctrl: mvebu: complain about missing group after checking variant") Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | pinctrl: sunxi: H3 requires irq_read_needs_muxKrzysztof Adamski2016-02-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that on H3, just like on A10, when GPIOs are configured as external interrupt data registers does not contain their value. When value is read, GPIO function must be temporary switched to input for reads. Signed-off-by: Krzysztof Adamski <k@japko.eu> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | pinctrl: mediatek: fix direction control issueBiao Huang2016-02-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since input-enable/disable and input-schmitt-enable/disable are workable when gpio direction is input, so add direction setting when do input-enable/disable and input-schmitt-enable/disable properties. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | pinctrl: nomadik: hide unused functionsArnd Bergmann2016-01-281-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nomadik pinctrl driver has two functions that are only used for debugfs output and are otherwise unused: drivers/pinctrl/nomadik/pinctrl-abx500.c:194:12: error: 'abx500_get_pull_updown' defined but not used drivers/pinctrl/nomadik/pinctrl-abx500.c:471:12: error: 'abx500_get_mode' defined but not used This makes the function definitions conditional to avoid the harmless warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | pinctrl: pxa: export pxa2xx_pinctrl_init()Masahiro Yamada2016-01-271-0/+1
| |/ | | | | | | | | | | | | | | | | | | Building pinctrl-pxa27x.c as a module causes a link error: ERROR: "pxa2xx_pinctrl_init" [drivers/pinctrl/pxa/pinctrl-pxa27x.ko] undefined! Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: amlogic: Make driver independent from two-domain configurationCarlo Caione2016-03-094-224/+228
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the Amlogic Meson8 / Meson8b platforms we have two different buses: cbus and aobus, corresponding to 2 different power domains (regular and always-on). On each bus a different set of registers is mapped to manage muxes, GPIOs and in general to control a clear subset of the pins. Considering this architecture, having two different pinctrl devices, one for each bus / power domain, makes much more sense than just having one single device. Right now we have one single pin controller driver that uses two different domains (represented by 'gpio' and 'gpio-ao' sub-nodes in the DTS) to manage the set of registers on the two buses. This dual-domain configuration is hardcoded into the driver that strictly requires one domain for each bus in the same pin controller device. With this patch we refactor the driver to allow splitting the driver in two parts. This change is needed to have a proper description of the HW in the device-tree where we want to introduce aobus and cbus. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: amlogic: Separate some pin functions for Meson8 / Meson8bCarlo Caione2016-03-091-8/+27
| | | | | | | | | | | | | | Separate functions for pins controlled by different pin controllers. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: at91: use __maybe_unused to hide pm functionsArnd Bergmann2016-03-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The at91-pio4 pinctrl driver uses SET_SYSTEM_SLEEP_PM_OPS() to conditionally set the correct suspend/resume options, but they become unused when CONFIG_PM is disabled: drivers/pinctrl/pinctrl-at91-pio4.c:827:12: error: 'atmel_pctrl_suspend' defined but not used [-Werror=unused-function] drivers/pinctrl/pinctrl-at91-pio4.c:847:12: error: 'atmel_pctrl_resume' defined but not used [-Werror=unused-function] This adds __maybe_unused annotations so the compiler knows it can silently drop them instead of warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: sh-pfc: core: don't open code of_device_get_match_data()Wolfram Sang2016-03-091-1/+1
| | | | | | | | | | | | | | | | | | | | This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: uniphier: rename CONFIG options and file namesMasahiro Yamada2016-03-098-13/+13
| | | | | | | | | | | | | | | | | | The current "CONFIG_PINCTRL_UNIPHIER_PH1_*" is too long. It would not hurt to drop "PH1_" because "UNIPHIER_" already well specifies the SoC family. Also, rename files for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: sunxi: make A80 explicitly non-modularPaul Gortmaker2016-03-091-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig currently controlling compilation of this code is: drivers/pinctrl/sunxi/Kconfig:config PINCTRL_SUN9I_A80_R drivers/pinctrl/sunxi/Kconfig: def_bool MACH_SUN9I ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: stm32: make explicitly non-modularPaul Gortmaker2016-03-091-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig currently controlling compilation of this code is: drivers/pinctrl/stm32/Kconfig:config PINCTRL_STM32F429 drivers/pinctrl/stm32/Kconfig: bool "STMicroelectronics STM32F429 pin control" if COMPILE_TEST && !MACH_STM32F429 ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: sh-pfc: make explicitly non-modularPaul Gortmaker2016-03-091-14/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig / Makefile currently controlling compilation of this code is: drivers/pinctrl/sh-pfc/Makefile:obj-$(CONFIG_PINCTRL_SH_PFC) += sh-pfc.o drivers/pinctrl/sh-pfc/Makefile:sh-pfc-objs = core.o pinctrl.o drivers/pinctrl/sh-pfc/Kconfig:config PINCTRL_SH_PFC drivers/pinctrl/sh-pfc/Kconfig: def_bool y ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init already wasn't being used in this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: linux-renesas-soc@vger.kernel.org Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: meson: make explicitly non-modularPaul Gortmaker2016-03-091-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig currently controlling compilation of this code is: drivers/pinctrl/Kconfig:config PINCTRL_MESON drivers/pinctrl/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Carlo Caione <carlo@endlessm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Antoine Tenart <antoine.tenart@free-electrons.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: pinctrl-mt6397 driver explicitly non-modularPaul Gortmaker2016-03-091-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig for this driver is currently: config PINCTRL_MT6397 bool "Mediatek MT6397 pin control" if COMPILE_TEST && !MFD_MT6397 ...meaning that it is currently not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: sunxi: does not need module.hPaul Gortmaker2016-03-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This file is not modular, nor is it using modular functions. The only thing close is the global THIS_MODULE which comes from export.h so lets replace it appropriately and cut back on the amount of header stuff we draw in by several thousand lines. Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: pxa2xx: export symbolsLinus Walleij2016-03-091-0/+2
| | | | | | | | | | | | | | | | The pxa2xxx fails some automated builds because of unexported symbols. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: sunxi: Change mux setting on PI irq pinsHenry Paulissen2016-03-081-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While I was testing irq's on the cubietruck I found a couple of not working irq pins. Further diving into the problem it opened up a mess called "manual". This so called manual (A20 user manual v1.3 dated 2014-10-10) says: Pin overview: Page 237: EINT26 is on mux 5. Page 288: EINT26 is on mux 6. The manual is so contradicting that further tests had to be made to see which of the 2 statements where correct. This patch is based on actual outcome of these tests and not what the manual says. Test procedure used: Connect a 1 pulse per second (GPS) line to the pin. echo pin### > /sys/class/gpio/export echo in > /sys/class/gpio/gpio###/direction echo rising > /sys/class/gpio/gpio###/edge Check /proc/interrupts if a irq was attached and if irq's where received. Hardware used: Henry Paulissen: Cubietruck Andere Przywara: BananaPi M1 Tested-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Henry Paulissen <henry@nitronetworks.nl> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: sunxi: Remove non existing irq'sHenry Paulissen2016-03-081-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While I was testing irq's on the cubietruck I found a couple of not working irq pins. Further diving into the problem it opened up a mess called "manual". This so called manual (A20 user manual v1.3 dated 2014-10-10) says: Pin overview: Page 233: EINT12 is on pin PC19 mux6. Page 236: EINT12 is on pin PH12 mux6. Now, it is a bit strange to have the same IRQ on 2 different pins, but I guess this could still be possible hardware wise. But then: Pin registers: Page 253: EINT12 is *not* on pin PC19. Page 281: EINT12 is on pin PH12. The manual is so contradicting that further tests had to be made to see which of the 2 statements where correct. This patch is based on actual outcome of these tests and not what the manual says. Test procedure used: Connect a 1 pulse per second (GPS) line to the pin. echo pin### > /sys/class/gpio/export echo in > /sys/class/gpio/gpio###/direction echo rising > /sys/class/gpio/gpio###/edge Check /proc/interrupts if a irq was attached and if irq's where received. Signed-off-by: Henry Paulissen <henry@nitronetworks.nl> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: imx: attach iomuxc device to gpr sysconPhilipp Zabel2016-03-0810-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bdb0066df96e ("mfd: syscon: Decouple syscon interface from platform devices") added the possibility to register syscon devices without associated platform device. This also removed regmap debugfs facilities, which don't work without a device. This patch associates the syscon regmap that handles the IOMUX controller's general purpose registers with the pinctrl device so that the GPR registers appear in the regmap debugfs directory again. For example, on i.MX6Q the GPR registers now can be read from /sys/kernel/debug/regmap/20e0000.iomuxc-gpr/registers. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsingPhil Elwell2016-03-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The DT bindings for pinctrl-bcm2835 allow both the function and pull to contain either one entry or one per pin. However, an error in the DT parsing can cause failures if the number of pulls differs from the number of functions. Cc: stable@vger.kernel.org Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Phil Elwell <phil@raspberrypi.org> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: lpc18xx: add nxp,gpio-pin-interrupt propertyJoachim Eastwood2016-03-071-6/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for setting up GPIO pin interrupts in the lpc18xx pinctrl driver. The LPC18xx SCU contain two registers that sets up the signal routing to the GPIO pin interrupt (PINT) block. The routing uses the GPIO namespace and not the pin namespace so a lookup is preformed on the pin. Routing configuration is done in the device tree by using the new nxp,gpio-pin-interrupt property. This property takes single parameter which sets the PINT hwirq for the GPIO. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: core: create nolock version of pinctrl_find_gpio_range_from_pinJoachim Eastwood2016-03-072-12/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | pinctrl_find_gpio_range_from_pin takes the pctldev->mutex but so does pinconf_pins_show and this will cause a deadlock if pinctrl_find_gpio_range_from_pin is used in .pin_config_get callback. Create a nolock version of pinctrl_find_gpio_range_from_pin to allow pin to gpio lookup to be used from pinconf_pins_show. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: lpc18xx: ensure ngroups is initialized at correct placeColin Ian King2016-03-071-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The initialization of ngroups is occurring at the end of the first iteration of the outer loop, which means that the assignment pins[ngroups++] = i is potentially indexing into a region outside of array pins because ngroups is not initialized. Instead, initialize ngroups in the inner loop before the first inner loop iteration. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge branch 'sh-pfc-for-v4.6' of ↵Linus Walleij2016-03-033-1/+91
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
| * | pinctrl: sh-pfc: r8a7795: Add CAN FD supportRamesh Shanmugasundaram2016-02-261-0/+37
| | | | | | | | | | | | | | | | | | | | | This patch adds CANFD[0-1] pinmux support to r8a7795 SoC. Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>