summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl (follow)
Commit message (Collapse)AuthorAgeFilesLines
* pinctrl: pinconf-generic: add "input-schmitt" DT propertyMasahiro Yamada2015-10-031-0/+1
| | | | | | | | PIN_CONFIG_INPUT_SCHMITT is defined in enum_pin_config_param, but the corresponding DT property is missing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: pinconf-generic: sort pin configuration params alphabeticallyMasahiro Yamada2015-10-031-17/+17
| | | | | | | | | | | | Currently, the dt_params array in drivers/pinctrl/pinconf-generic.c is not sorted in the same order as the enum pin_config_param in include/linux/pinctrl/pinconf-generic.h. Sort enum pin_config_param, conf_items, dt_params, alphabetically for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: at91-pio4: irq argument as been removed from irq flow handlersLudovic Desroches2015-10-021-2/+3
| | | | | | | | Irq argument as been removed from irq flow handlers so use the irq descriptor to retrieve data we need. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: at91-pio4: use irq_set_handler_lockedLudovic Desroches2015-10-021-5/+5
| | | | | | | | Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: freescale: imx7d: support iomux lpsr controllerAdrian Alonso2015-10-021-0/+30
| | | | | | | | | | | | | iMX7D has two iomuxc controllers, iomuxc controller similar as previous iMX SoC generation and iomuxc-lpsr which provides low power state rentetion capabilities on gpios that are part of iomuxc-lpsr Add iomuxc-lpsr gpio group id's Signed-off-by: Adrian Alonso <aalonso@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: freescale: imx: add shared input select reg supportAdrian Alonso2015-10-021-1/+27
| | | | | | | | | | - Add shared input select register support - imx7d has two iomux controllers iomuxc and iomuxc-lpsr which share select_input register for daisy chain settings Signed-off-by: Adrian Alonso <aalonso@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: freescale: imx: allow mux_reg offset zeroAdrian Alonso2015-10-022-1/+5
| | | | | | | | | Allow mux_reg offset zero to be a valid pin_id, on imx7d mux_conf reg offset is zero for iomuxc-lspr controller Signed-off-by: Adrian Alonso <aalonso@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: freescale: imx: fix system crash if enable two pinctl instancesRobin Gong2015-10-022-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix system chrash caused by groups whose number is smaller than the number of groups of the last pinctl instance which is not initialized. iMX7D supports two iomux controllers (iomuxc-lpsr and iomuxc) on probing the second instance (iomuxc) the chrash below occurs. Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.2.0-next-20150901-00006-gebfa43c (aalonso@bluefly) [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7) [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasin instruction cache [ 0.000000] Machine model: Freescale i.MX7 SabreSD Board [ 0.661012] [<802a6cb0>] (strcmp) from [<802cc80c>] (imx_dt_node_to_map+0x58/0x208) [ 0.668879] [<802cc80c>] (imx_dt_node_to_map) from [<802cbe24>] (pinctrl_dt_to_map+0x174/0x2b0) [ 0.677654] [<802cbe24>] (pinctrl_dt_to_map) from [<802c8f18>] (pinctrl_get+0x100/0x424) [ 0.685878] [<802c8f18>] (pinctrl_get) from [<802c9510>] (pinctrl_register+0x26c/0x480) [ 0.694104] [<802c9510>] (pinctrl_register) from [<802ccf3c>] (imx_pinctrl_probe+0x580/0x6e8) [ 0.702706] [<802ccf3c>] (imx_pinctrl_probe) from [<80351b58>] (platform_drv_probe+0x44/0xa4) [ 0.711455] [<80351b58>] (platform_drv_probe) from [<803503ec>] (driver_probe_device+0x174/0x2b4) [ 0.720405] [<803503ec>] (driver_probe_device) from [<803505fc>] (__driver_attach+0x8c/0x90) [ 0.728982] [<803505fc>] (__driver_attach) from [<8034e930>] (bus_for_each_dev+0x6c/0xa0) [ 0.737381] [<8034e930>] (bus_for_each_dev) from [<8034fb88>] (bus_add_driver+0x148/0x1f0) [ 0.745804] [<8034fb88>] (bus_add_driver) from [<80350c00>] (driver_register+0x78/0xf8) [ 0.753880] [<80350c00>] (driver_register) from [<800097d0>] (do_one_initcall+0x8c/0x1d4) [ 0.762282] [<800097d0>] (do_one_initcall) from [<80987dac>] (kernel_init_freeable+0x144/0x1e4) [ 0.771061] [<80987dac>] (kernel_init_freeable) from [<806d9c7c>] (kernel_init+0x8/0xe8) [ 0.779285] [<806d9c7c>] (kernel_init) from [<8000f628>] (ret_from_fork+0x14/0x2c) [ 0.786981] Code: e3520000 e5e32001 1afffffb e12fff1e (e4d03001) Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Adrian Alonso <aalonso@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: at91-pio4: add PM stuffLudovic Desroches2015-10-021-0/+76
| | | | | | | | Allow GPIOs to be configured as wakeup sources. When going to suspend, disable all GPIO irqs excepting the one configured as wakeup sources. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: add allwinner A83T PIO controller supportVishnu Patekar2015-10-023-0/+608
| | | | | | | | | | | Allwinner A83T soc port controller has 8 ports. It has 3 IRQ banks namely PB, PG, PH. Pinmuxing are different for some pins as compared to sun8i A23 and A33. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: uniphier: add SD card pinmux settingsMasahiro Yamada2015-10-026-0/+36
| | | | | | | | Add SD card pinmux settings for PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5, ProXstream2, and PH1-LD6b SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: samsung: Remove unneded semicolonJavier Martinez Canillas2015-10-021-1/+1
| | | | | | | | It's not needed an is just creating a null statement, so remove it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: mediatek: Remove unneded semicolonJavier Martinez Canillas2015-10-021-1/+1
| | | | | | | | It's not needed an is just creating a null statement, so remove it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: sunxi: Remove unneeded semicolonJavier Martinez Canillas2015-10-021-1/+1
| | | | | | | | It's not needed an is just creating a null statement, so remove it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: mxs: Remove unneded semicolonJavier Martinez Canillas2015-10-021-1/+1
| | | | | | | | It's not needed an is just creating a null statement, so remove it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: tz1090-pdc: Remove unneded semicolonsJavier Martinez Canillas2015-10-021-2/+2
| | | | | | | They aren't needed and are just creating null statements so remove it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* pinctrl: tz1090: Remove unneded semicolonsJavier Martinez Canillas2015-10-021-2/+2
| | | | | | | They aren't needed and are just creating null statements so remove it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge branch 'sh-pfc-for-v4.4' of ↵Linus Walleij2015-10-0215-2237/+5046
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
| * pinctrl: sh-pfc: r8a7795: add EtherAVB supportTakeshi Kihara2015-10-021-0/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds EthernetAVB Based on a much lager patch by Takeshi Kihara which was originally posted by Kuninori Morimoto. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [horms: extracted from a larger patch; corrected swapped {MATCH,CAPTURE_A} pins] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: r8a7795: add Audio SSI pin supportKuninori Morimoto2015-10-021-0/+231
| | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: r8a7795: add Audio clock pin supportKuninori Morimoto2015-10-021-0/+160
| | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: r8a7795: add I2C pin supportKuninori Morimoto2015-10-021-0/+77
| | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: r8a7795: add SCIFx supportGeert Uytterhoeven2015-10-021-0/+257
| | | | | | | | | | | | | | | | | | | | This patch adds SCIF0/1/2/3/4/5 Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [Morimoto-san: Updated] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
| * pinctrl: sh-pfc: Initial R8A7795 PFC supportTakeshi Kihara2015-10-025-0/+2018
| | | | | | | | | | | | | | | | | | | | Add PFC base support for the R8A7795 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Morimoto-san: updated] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: remove unused PINMUX_IPSR_MODSEL_DATA()Kuninori Morimoto2015-10-021-2/+0
| | | | | | | | | | | | | | | | | | | | Now, all PINMUX_IPSR_MODSEL_DATA() are replased to PINMUX_IPSR_MSEL() Let's remove unused PINMUX_IPSR_MODSEL_DATA() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: r8a7779: use PINMUX_IPSR_MSEL()Kuninori Morimoto2015-10-021-210/+210
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same. Current PFC driver is very difficult to read, because macro names are using different length. PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) PINMUX_IPSR_MODSEL_DATA(ipsr, ...) It can be readable if we can use PINMUX_IPSR_MSEL() instead of PINMUX_IPSR_MODSEL_DATA() PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: r8a7790: use PINMUX_IPSR_MSEL()Kuninori Morimoto2015-10-021-519/+519
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same. Current PFC driver is very difficult to read, because macro names are using different length. PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) PINMUX_IPSR_MODSEL_DATA(ipsr, ...) It can be readable if we can use PINMUX_IPSR_MSEL() instead of PINMUX_IPSR_MODSEL_DATA() PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: r8a7791: use PINMUX_IPSR_MSEL()Kuninori Morimoto2015-10-021-538/+538
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same. Current PFC driver is very difficult to read, because macro names are using different length. PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) PINMUX_IPSR_MODSEL_DATA(ipsr, ...) It can be readable if we can use PINMUX_IPSR_MSEL() instead of PINMUX_IPSR_MODSEL_DATA() PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: r8a7794: use PINMUX_IPSR_MSEL()Kuninori Morimoto2015-10-021-414/+414
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same. Current PFC driver is very difficult to read, because macro names are using different length. PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) PINMUX_IPSR_MODSEL_DATA(ipsr, ...) It can be readable if we can use PINMUX_IPSR_MSEL() instead of PINMUX_IPSR_MODSEL_DATA() PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: sh7734: use PINMUX_IPSR_MSEL()Kuninori Morimoto2015-10-021-389/+389
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are same. Current PFC driver is very difficult to read, because macro names are using different length. PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) PINMUX_IPSR_MODSEL_DATA(ipsr, ...) It can be readable if we can use PINMUX_IPSR_MSEL() instead of PINMUX_IPSR_MODSEL_DATA() PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: modify PINMUX_IPSR_MSEL() macro orderKuninori Morimoto2015-10-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The difference between PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() are FN_xxx order, and PINMUX_IPSR_MSEL() is used only from r8a7778. Now it r8a7778 works correctly with PINMUX_IPSR_MODSEL_DATA() order. This means we can merge PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA(). Current PFC driver is very difficult to read, because macro names are using different length. Especially PINMUX_IPSR_MODSEL_DATA() is well used macro PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) PINMUX_IPSR_MODSEL_DATA(ipsr, ...) It can be readable if we can merge PINMUX_IPSR_MSEL() and PINMUX_IPSR_MODSEL_DATA() PINMUX_IPSR_NOGP(ispr, ...) PINMUX_IPSR_DATA(ipsr, ...) PINMUX_IPSR_NOGM(ispr, ...) PINMUX_IPSR_NOFN(ipsr, ...) PINMUX_IPSR_MSEL(ipsr, ...) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: Remove hardcoded IRQ numbersLaurent Pinchart2015-10-025-134/+125
| | | | | | | | | | | | | | | | | | Now that all ARM-based Renesas SoCs use multiplatform kernels only the hardcoded IRQ numbers can be dropped as they're dynamically allocated. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * pinctrl: sh-pfc: Get rid of CONFIG_ARCH_SHMOBILE_LEGACYGeert Uytterhoeven2015-10-021-22/+19
| | | | | | | | | | | | | | | | | | | | | | | | Shmobile is all multiplatform these days, so get rid of the reference to CONFIG_ARCH_SHMOBILE_LEGACY. Move the legacy code to do the non-DT mapping between GPIOs and pins inside the existing #ifdef CONFIG_SUPERH section. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
| * pinctrl: sh-pfc: r8a7791/r8a7793: Correct SCIFB1_B SCK MOD_SEL valueGeert Uytterhoeven2015-10-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using serial port SCIFB1_B, transmit works, but nothing is received. Receive fails because the SCIFB1_SCK_B settings configure the wrong value for the sel_scifb1 field in the Module Select Register (MOD_SEL), due to an ambiguity in the R-Car M2-W and M2-N datasheets. Tested on r8a7791/koelsch using pins 53 (TXD) and 72 (RXD) on EXIO Connector A. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org>
| * pinctrl: sh-pfc: r8a7794: Remove bogus SCIF0 SCK pin dataGeert Uytterhoeven2015-10-021-18/+0
| | | | | | | | | | | | | | | | | | | | SCIF0 on R-Car E2 does not have an SCK pin. "SCIF_CLK" is the (H)SCIF baud rate generation clock pin, which is not yet supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org>
| * pinctrl: sh-pfc: Confine legacy function GPIOs to SHGeert Uytterhoeven2015-10-023-1/+10
| | | | | | | | | | | | | | | | | | | | | | Legacy function GPIOs are no longer used on ARM since commit a27c5cd1a08cc95c ("sh-pfc: sh73a0: Remove function GPIOs"). Extract its setup code into a separate function, and make all function GPIO related code and data depend on CONFIG_SUPERH. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
| * pinctrl: sh-pfc: Remove empty gpio_function_free()Geert Uytterhoeven2015-10-021-5/+0
| | | | | | | | | | | | | | | | gpio_chip.free() is optional, and can just be left unimplemented. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
| * pinctrl: sh-pfc: Stop calling gpiochip_add_pin_range() on DT platformsGeert Uytterhoeven2015-10-021-15/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | On platforms where the PFC/GPIO controller is instantiated from DT, the mapping between GPIOs and pins is set up using the "gpio-ranges" property in DT. Hence stop setting up the mapping from C code on DT platforms. This code is still used for SH or ARM-legacy platforms. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
* | pinctrl: mediatek: Consistently use the BIT() macroJavier Martinez Canillas2015-09-251-1/+1
| | | | | | | | | | | | | | | | | | | | The mediatek pinctrl driver uses the BIT() macro instead of open coding 1 << n in all but one place. Replace this occurrence with the BIT() macro for consistency. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: rockchip: add support for the rk3036Xing Zheng2015-09-251-0/+17
| | | | | | | | | | | | | | | | Many parts of pinctrl rk3036 are similar to rk2928's. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: introduce driver for Atmel PIO4 controllerLudovic Desroches2015-09-213-0/+1031
| | | | | | | | | | | | | | | | Add a pinctrl/gpio driver for Atmel PIO4 controller available on SAMA5D2 chip family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2015-09-1822-50/+44
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is a rather large update post rc1 due to the final steps of cleanups and API changes which had to wait for the preparatory patches to hit your tree. - Regression fixes for ARM GIC irqchips - Regression fixes and lockdep anotations for renesas irq chips - The leftovers of the cleanup and preparatory patches which have been ignored by maintainers - Final conversions of the newly merged users of obsolete APIs - Final removal of obsolete APIs - Final removal of ARM artifacts which had been introduced during the conversion of ARM to the generic interrupt code. - Final split of the irq_data into chip specific and common data to reflect the needs of hierarchical irq domains. - Treewide removal of the first argument of interrupt flow handlers, i.e. the irq number, which is not used by the majority of handlers and simple to retrieve from the other argument the irq descriptor. - A few comment updates and build warning fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) arm64: Remove ununsed set_irq_flags ARM: Remove ununsed set_irq_flags sh: Kill off set_irq_flags usage irqchip: Kill off set_irq_flags usage gpu/drm: Kill off set_irq_flags usage genirq: Remove irq argument from irq flow handlers genirq: Move field 'msi_desc' from irq_data into irq_common_data genirq: Move field 'affinity' from irq_data into irq_common_data genirq: Move field 'handler_data' from irq_data into irq_common_data genirq: Move field 'node' from irq_data into irq_common_data irqchip/gic-v3: Use IRQD_FORWARDED_TO_VCPU flag irqchip/gic: Use IRQD_FORWARDED_TO_VCPU flag genirq: Provide IRQD_FORWARDED_TO_VCPU status flag genirq: Simplify irq_data_to_desc() genirq: Remove __irq_set_handler_locked() pinctrl/pistachio: Use irq_set_handler_locked gpio: vf610: Use irq_set_handler_locked powerpc/mpc8xx: Use irq_set_handler_locked() powerpc/ipic: Use irq_set_handler_locked() powerpc/cpm2: Use irq_set_handler_locked() ...
| * | genirq: Remove irq argument from irq flow handlersThomas Gleixner2015-09-1622-42/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
| * | pinctrl/pistachio: Use irq_set_handler_lockedThomas Gleixner2015-09-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle: Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org
| * | pinctrl: sunxi: Use irq_set_chip_handler_name_locked()Thomas Gleixner2015-09-161-6/+4
| |/ | | | | | | | | | | | | | | | | __irq_set_chip_handler_name_locked() is about to be replaced. Use irq_set_chip_handler_name_locked() instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org
* | pinctrl: samsung: s3c24xx: fix syntax errorLinus Walleij2015-09-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | ?SYNTAX ERROR irq_desc_get_irq_chip() does not exist. It should be irq_desc_get_chip(). Tested by compiling s3c2410_defconfig. Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: core: Warn about NULL gpio_chip in pinctrl_ready_for_gpio_range()Tony Lindgren2015-09-141-0/+3
| | | | | | | | | | | | | | | | | | | | If the gpio driver is confused about the numbers for gpio-ranges, pinctrl_ready_for_gpio_range() may get called with invalid GPIO causing a NULL pointer exception. Let's instead provide a warning that allows fixing the problem and return with error. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: join lines that can be a single line within 80 columnsMasahiro Yamada2015-09-141-2/+1
| | | | | | | | | | | | | | There is no reason to break a line shorter than 80 columns. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: digicolor: convert null test to IS_ERR testJulia Lawall2015-09-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 323de9efdf3e ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update a driver that was introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: qcom: ssbi: convert null test to IS_ERR testJulia Lawall2015-09-142-4/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 323de9efdf3e ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update some drivers that were introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-07 14:41:00 +0100