summaryrefslogtreecommitdiffstats
path: root/drivers/pwm (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drivers/pwm: don't check resource with devm_ioremap_resourceWolfram Sang2013-05-188-40/+0
| | | | | | | | devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com>
* pwm: lpc32xx: Don't change PWM_ENABLE bit in lpc32xx_pwm_configAxel Lin2013-04-231-2/+5
| | | | | | | | | lpc32xx_pwm_config() is supposed to set duty_ns and period_ns, it should not change PWM_ENABLE bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: lpc32xx: Properly set PWM_ENABLE bit in lpc32xx_pwm_[enable|disable]Axel Lin2013-04-231-2/+16
| | | | | | | | | | | | | | | | | | | | | | According to the LPC32x0 User Manual [1]: For both PWM1 and PWM2 Control Registers: BIT 31: This bit gates the PWM_CLK signal and enables the external output pin to the PWM_PIN_STATE logical level. 0 = PWM disabled. (Default) 1 = PWM enabled So in lpc32xx_pwm_enable(), we should set PWM_ENABLE bit. In lpc32xx_pwm_disable(), we should just clear PWM_ENABLE bit rather than write 0 to the register which will also clear PWMx_RELOADV and PWMx_DUTY bits. [1] http://www.nxp.com/documents/user_manual/UM10326.pdf Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: Constify OF match tablesThierry Reding2013-04-236-6/+6
| | | | | | | | | | A few drivers already annotate this properly. Make the same change for all other OF supporting drivers. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
* pwm: puv3: Remove unused enabled filed from struct puv3_pwm_chipAxel Lin2013-04-021-1/+0
| | | | | Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: pxa: Remove PWM_ID_BASE macroAxel Lin2013-04-021-4/+3
| | | | | | | | | PWM_ID_BASE() is not used after convert to PWM framework, remove it. Also update driver_data field of struct platform_device_id accordingly. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: spear: Remove unused *dev from struct spear_pwm_chipAxel Lin2013-04-021-3/+0
| | | | | | | Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Shiraz Hashim <shiraz.hashim@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: mxs: Remove unused *dev from struct mxs_pwm_chipAxel Lin2013-04-021-2/+0
| | | | | | Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: twl: Return proper error if twl6030_pwm_enable() failsAxel Lin2013-04-021-1/+1
| | | | | | | | Return proper error instead of 0 if twl6030_pwm_enable() fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: pxa: Remove clk_enabled field from struct pxa_pwm_chipAxel Lin2013-04-021-14/+2
| | | | | | | | | | | clk_enable/clk_disable maintain an enable_count, clk_prepare and clk_unprepare also maintain a prepare_count. These APIs will do prepare/enable when the first user calling these APIs, and do disable/unprepare when the corresponding counter reach 0. Thus We don't need to maintain a clk_enabled counter here. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: imx: Remove enabled field from struct imx_chipAxel Lin2013-04-021-5/+1
| | | | | | | | | We can test PWMF_ENABLED bit to know if pwm is enabled or not. Thus remove enabled field from struct imx_chip. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: twl: Add .owner to struct pwm_opsAxel Lin2013-04-021-0/+2
| | | | | | | | | Add missing .owner of struct pwm_ops. This prevents the module from being removed from underneath its users. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: twl-led: Add .owner to struct pwm_opsAxel Lin2013-04-021-0/+2
| | | | | | | | | Add missing .owner of struct pwm_ops. This prevents the module from being removed from underneath its users. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: atmel-tcb: Add .owner to struct pwm_opsAxel Lin2013-04-021-0/+1
| | | | | | | | Add missing .owner of struct pwm_ops. This prevents the module from being removed from underneath its users. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: ab8500: Add .owner to struct pwm_opsAxel Lin2013-04-021-0/+1
| | | | | | | | Add missing .owner of struct pwm_ops. This prevents the module from being removed from underneath its users. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: spear: Fix checking return value of clk_enable() and clk_prepare()Axel Lin2013-04-021-3/+3
| | | | | | | | | | The logic to check return value of clk_enable() and clk_prepare() is reversed, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: stable@vger.kernel.org Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: tiehrpwm: Staticize non-exported symbolsAxel Lin2013-03-261-2/+2
| | | | | | | | Both ehrpwm_pwm_save_context() and ehrpwm_pwm_restore_context() are only used in this file, make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: tiecap: Staticize non-exported symbolsAxel Lin2013-03-261-2/+2
| | | | | | | | Both ecap_pwm_save_context() and ecap_pwm_restore_context() are only used in this file, make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: ab8500: Fix trivial typo in dev_err messageAxel Lin2013-03-261-1/+1
| | | | | Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: davinci: Add Kconfig support for ECAP & EHRPWM devicesPhilip Avinash2013-03-222-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add EHRPWM and ECAP support build support for DAVINCI_DA8XX platforms. Also, since DAVINCI platforms doesn't support TI-PWM-Subsystem module, remove the select option for CONFIG_PWM_TIPWMSS. Also, update CONFIG_PWM_TIPWMSS compiler directive appropriately in pwm-tipwmss.h to fix the below compiler error upon removal of CONFIG_PWM_TIPWMSS for DAVINCI platforms. drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_probe': drivers/pwm/pwm-tiecap.c:263:4: error: 'PWMSS_ECAPCLK_EN' undeclared (first use in this function) drivers/pwm/pwm-tiecap.c:263:4: note: each undeclared identifier is reported only once for each function it appears in drivers/pwm/pwm-tiecap.c:264:17: error: 'PWMSS_ECAPCLK_EN_ACK' undeclared (first use in this function) drivers/pwm/pwm-tiecap.c: In function 'ecap_pwm_remove': drivers/pwm/pwm-tiecap.c:291:49: error: 'PWMSS_ECAPCLK_STOP_REQ' undeclared (first use in this function) make[2]: *** [drivers/pwm/pwm-tiecap.o] Error 1 make[1]: *** [drivers/pwm] Error 2 make: *** [drivers] Error 2 Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: pwm-tiehrpwm: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han2013-03-111-0/+2
| | | | | | | | | | | This patch adds CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. drivers/pwm/pwm-tiehrpwm.c:562:12: warning: 'ehrpwm_pwm_suspend' defined but not used [-Wunused-function] drivers/pwm/pwm-tiehrpwm.c:580:12: warning: 'ehrpwm_pwm_resume' defined but not used [-Wunused-function Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: pwm-tipwmss: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han2013-03-111-0/+2
| | | | | | | | | | | This patch adds CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. drivers/pwm/pwm-tipwmss.c:104:12: warning: 'pwmss_suspend' defined but not used [-Wunused-function] drivers/pwm/pwm-tipwmss.c:113:12: warning: 'pwmss_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: pwm-tiecap: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han2013-03-111-0/+2
| | | | | | | | | | | This patch adds CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. drivers/pwm/pwm-tiecap.c:314:12: warning: 'ecap_pwm_suspend' defined but not used [-Wunused-function] drivers/pwm/pwm-tiecap.c:328:12: warning: 'ecap_pwm_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: samsung: convert s3c_pwm to dev_pm_opsJingoo Han2013-03-081-11/+9
| | | | | | | | Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* pwm: ab8500: use devm_kzalloc()Jingoo Han2013-03-081-5/+2
| | | | | | | Use devm_kzalloc() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* Merge tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds2013-02-2610-29/+697
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull PWM changes from Thierry Reding: "A new driver has been added to support the PWM mode of the timer counter blocks found on Atmel AT91 SoCs. The VT8500 driver now supports changing the PWM signal polarity and the TI drivers (EHRPWM and ECAP) gained suspend and resume functionality. User drivers can now query the core for whether access to a PWM device will sleep (if the PWM chip is on a slow bus such as I2C or SPI). The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK state in addition to the FB layer's blanking states. To round things off, a few fixes and cleanups are also included" * tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm: pwm: twl: Use to_twl() instead of container_of() pwm: tegra: assume CONFIG_OF pwm_backlight: Validate dft_brightness in main probe function pwm: Export pwm_{set,get}_chip_data() pwm: Make Kconfig entries more consistent pwm: Add can_sleep property to drivers pwm: Add pwm_can_sleep() as exported API to users pwm-backlight: handle BL_CORE_FBBLANK state pwm: pwm-tiecap: Low power sleep support pwm: pwm-tiehrpwm: Low power sleep support pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver pwm: vt8500: Add polarity support pwm: vt8500: Register write busy test performed incorrectly pwm: atmel: add Timer Counter Block PWM driver
| * pwm: twl: Use to_twl() instead of container_of()Johannes Thumshirn2013-02-171-6/+3
| | | | | | | | | | | | | | | | Always use to_twl() for converting into private data instead of container_of(). Signed-off-by: Johannes Thumshirn <morbidrsa@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: tegra: assume CONFIG_OFStephen Warren2013-02-151-3/+1
| | | | | | | | | | | | | | | | Tegra only supports, and always enables, device tree. Remove all ifdefs for DT support from the driver. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: Export pwm_{set,get}_chip_data()Thierry Reding2013-01-301-0/+2
| | | | | | | | | | | | | | When building a driver as a module, these functions need to be exported for linking to succeed. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: Make Kconfig entries more consistentThierry Reding2013-01-301-4/+4
| | | | | | | | | | | | | | PWM is now consistently spelled in all uppercase letters. For the Atmel driver the entry now also mentions Atmel to make it easier to find. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: Add can_sleep property to driversFlorian Vaussard2013-01-302-0/+2
| | | | | | | | | | | | | | | | | | Calls to PWM drivers connected through I2C can sleep. Use the new can_sleep property. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: Add pwm_can_sleep() as exported API to usersFlorian Vaussard2013-01-301-0/+12
| | | | | | | | | | | | | | | | | | | | | | Calls to some external PWM chips can sleep. To help users, add pwm_can_sleep() API. Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: pwm-tiecap: Low power sleep supportPhilip Avinash2013-01-171-0/+53
| | | | | | | | | | | | | | | | In low power modes of AM33XX platforms, peripherals power is cut off. This patch supports low power sleep transition support for ECAP driver. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: pwm-tiehrpwm: Low power sleep supportPhilip Avinash2013-01-171-0/+83
| | | | | | | | | | | | | | | | | | In low power modes of AM33XX platforms, peripherals power is cut off. This patch supports low power sleep transition support for EHRPWM driver. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driverPhilip, Avinash2013-01-141-2/+8
| | | | | | | | | | | | | | | | | | | | The clock framework has changed and it's now better to invoke clock_prepare_enable() and clk_disable_unprepare() rather than the legacy clk_enable() and clk_disable() calls. This patch converts the pwm-tiehrpwm driver to the new framework. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: vt8500: Add polarity supportTony Prisk2013-01-091-0/+23
| | | | | | | | | | | | | | | | | | | | | | Add support to set polarity on PWM devices, allowing for inverted duty cycles. Also update the binding document to #pwm-cells = <3> to allow passing the flags from devicetree. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: vt8500: Register write busy test performed incorrectlyTony Prisk2013-01-091-15/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct operation for register writes is to perform a busy-wait after writing the register. Currently the busy wait it performed before, meaning subsequent register writes to bitfields may occur before the previous field has been updated. Also, all registers are defined as 32-bit read/write. Change pwm_busy_wait() to use readl rather than readb. Improve readability of code with defines for registers and bitfields. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: atmel: add Timer Counter Block PWM driverBoris BREZILLON2013-01-083-0/+458
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a PWM driver based on Atmel Timer Counter Block. The Timer Counter Block is used in Waveform generator mode. A Timer Counter Block provides up to 6 PWM devices grouped by 2: * group 0 = PWM 0 and 1 * group 1 = PWM 2 and 3 * group 2 = PMW 4 and 5 PWM devices in a given group must be configured with the same period value. If a PWM device in a group tries to change the period value and the other device is already configured with a different value an error will be returned. This driver requires device tree support. The Timer Counter Block number used to create a PWM chip is given by the tc-block field in an "atmel,tcb-pwm" compatible node. This patch was tested on kizbox board (at91sam9g20 SoC) with pwm-leds. Signed-off-by: Boris BREZILLON <linux-arm@overkiz.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
* | Merge branch 'for-next' of ↵Linus Torvalds2013-02-261-4/+34
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (61 commits) leds: leds-sunfire: use dev_err()/pr_err() instead of printk() leds: 88pm860x: Add missing of_node_put() leds: tca6507: Use of_get_child_count() leds: leds-pwm: make it depend on PWM and not HAVE_PWM Documentation: leds: update LP55xx family devices leds-lp55xx: fix problem on removing LED attributes leds-lp5521/5523: add author and copyright description leds-lp5521/5523: use new lp55xx common header leds-lp55xx: clean up headers leds-lp55xx: clean up definitions leds-lp55xx: clean up unused data and functions leds-lp55xx: clean up _remove() leds-lp55xx: add new function for removing device attribtues leds-lp55xx: code refactoring on selftest function leds-lp55xx: use common device attribute driver function leds-lp55xx: support device specific attributes leds-lp5523: use generic firmware interface leds-lp5521: use generic firmware interface leds-lp55xx: support firmware interface leds-lp55xx: add new lp55xx_register_sysfs() for the firmware interface ...
| * | pwm: Add devm_of_pwm_get() as exported API for usersPeter Ujfalusi2013-02-021-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | When booted with DT users can use devm version of of_pwm_get() to benefit from automatic resource release. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Bryan Wu <cooloney@gmail.com>
| * | pwm: core: Rename of_pwm_request() to of_pwm_get() and export itPeter Ujfalusi2013-02-021-4/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow client driver to use of_pwm_get() to get the PWM they need. This is needed for drivers which handle more than one PWM separately, like leds-pwm driver, which have: pwmleds { compatible = "pwm-leds"; kpad { label = "omap4::keypad"; pwms = <&twl_pwm 0 7812500>; max-brightness = <127>; }; charging { label = "omap4:green:chrg"; pwms = <&twl_pwmled 0 7812500>; max-brightness = <255>; }; }; in the dts files. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* / pwm: Convert to devm_ioremap_resource()Thierry Reding2013-01-2211-33/+33
|/ | | | | | | | | Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds2012-12-1915-218/+1430
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull pwm changes from Thierry Reding: "A new driver has been added for the SPEAr platform and the TWL4030/6030 driver has been replaced by two drivers that control the regular PWMs and the PWM driven LEDs provided by the chips. The vt8500, tiecap, tiehrpwm, i.MX, LPC32xx and Samsung drivers have all been improved and the device tree bindings now support the PWM signal polarity." Fix up trivial conflicts due to __devinit/exit removal. * tag 'for-3.8-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (21 commits) pwm: samsung: add missing s3c->pwm_id assignment pwm: lpc32xx: Set the chip base for dynamic allocation pwm: lpc32xx: Properly disable the clock on device removal pwm: lpc32xx: Fix the PWM polarity pwm: i.MX: eliminate build warning pwm: Export of_pwm_xlate_with_flags() pwm: Remove pwm-twl6030 driver pwm: New driver to support PWM driven LEDs on TWL4030/6030 series of PMICs pwm: New driver to support PWMs on TWL4030/6030 series of PMICs pwm: pwm-tiehrpwm: pinctrl support pwm: tiehrpwm: Add device-tree binding pwm: pwm-tiehrpwm: Adding TBCLK gating support. pwm: pwm-tiecap: pinctrl support pwm: tiecap: Add device-tree binding pwm: Add TI PWM subsystem driver pwm: Device tree support for PWM polarity pwm: vt8500: Ensure PWM clock is enabled during pwm_config pwm: vt8500: Fix build error pwm: spear: Staticize spear_pwm_config() pwm: Add SPEAr PWM chip driver support ...
| * pwm: samsung: add missing s3c->pwm_id assignmentJoonyoung Shim2012-12-141-0/+1
| | | | | | | | | | | | | | The s3c->pwm_id is used to calculate offset of related register. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: lpc32xx: Set the chip base for dynamic allocationAlban Bedel2012-12-061-0/+1
| | | | | | | | | | | | | | | | | | | | Doing so allows the base to be allocated dynamically at runtime and makes it easier for the chip to coexist with other PWM chips. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: lpc32xx: Properly disable the clock on device removalAlban Bedel2012-12-061-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | A single clock is used for all PWMs meaning the clock's reference count might be between 0 and N when .remove() is called. Instead of a single clk_disable() call pwm_disable() on each PWM, to ensure that clk_disable() is called for each PWM that is still enabled. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: lpc32xx: Fix the PWM polarityAlban Bedel2012-12-061-1/+16
| | | | | | | | | | | | | | | | | | | | The duty cycles value goes from 1 (99% HIGH) to 256 (0% HIGH) but it is stored modulo 256 in the register as it is only 8 bits wide. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: i.MX: eliminate build warningLothar Waßmann2012-12-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | compiling the i.MX pwm driver produces the following warning: |drivers/pwm/pwm-imx.c: In function 'imx_pwm_probe': |drivers/pwm/pwm-imx.c:281:7: warning: assignment discards qualifiers from pointer target type Apply a 'const' attribute to the affected variable declaration. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: Export of_pwm_xlate_with_flags()Thierry Reding2012-12-061-0/+1
| | | | | | | | | | | | | | | | | | Drivers may want to use this function if they support any of the flags that can be passed via a third cell in the DT specifier. Since those drivers may be built as modules the symbol needs to be exported to make sure that it can be accessed. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
| * pwm: Remove pwm-twl6030 driverPeter Ujfalusi2012-11-283-194/+0
| | | | | | | | | | | | | | | | | | This driver only supported the Charging indicator LED. New set of drivers going to provide support for both PWMs and LEDs for twl4030 and twl6030 series of PMICs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 17:39:27 +0100