summaryrefslogtreecommitdiffstats
path: root/drivers/rtc (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drivers/rtc/rtc-armada38x.c: remove unused local `flags'Andrew Morton2015-05-151-1/+1
| | | | | | | Reported-by: Fengguang Wu <fengguang.wu@gmail.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: armada38x: fix concurrency access in armada38x_rtc_set_timeGregory CLEMENT2015-05-061-12/+12
| | | | | | | | | | | | | | | | | | | | | While setting the time, the RTC TIME register should not be accessed. However due to hardware constraints, setting the RTC time involves sleeping during 100ms. This sleep was done outside the critical section protected by the spinlock, so it was possible to read the RTC TIME register and get an incorrect value. This patch introduces a mutex for protecting the RTC TIME access, unlike the spinlock it is allowed to sleep in a critical section protected by a mutex. The RTC STATUS register can still be used from the interrupt handler but it has no effect on setting the time. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> [4.0] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: add rtc-abx80x, a driver for the Abracon AB x80x i2c rtcPhilippe De Muyter2015-05-063-0/+318
| | | | | | | | | | | | | | | | | | This is a basic driver for the ultra-low-power Abracon AB x80x series of RTC chips. It supports in particular, the supersets AB0805 and AB1805. It allows reading and writing the time, and enables the supercapacitor/ battery charger. [arnd@arndb.de: abx805 depends on i2c] [alexandre.belloni@free-electrons.com: renam buffer from date to buf in abx80x_rtc_read_time()] Signed-off-by: Philippe De Muyter <phdm@macqel.be> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-at91rm9200.c: make IO endian agnosticBen Dooks2015-04-171-2/+2
| | | | | | | | | | | | | Change the __raw IO calls to readl/write_relaxed which makes the driver endian agnostic to run properly on big endian systems. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Andrew Victor <linux@maxim.org.za> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-s5m.c: allow usage on device type different than main MFD typeKrzysztof Kozlowski2015-04-171-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | The RTC driver supports two flavors of S5M devices: S5M8767-like and S2MPS14-like. On S2MPS13 and S2MPS14 devices the RTC module is the same so we want to re-use the existing support of S2MPS14. However device type was passed from parent MFD driver in platform data structure. This way for the S2MPS13 device the main MFD driver passed device type of 'S2MPS13X'. Instead decouple detecting of device type between main MFD and RTC driver. This allows adding support for other S2MPS14 variations (like S2MPS11 and S2MPS13) easily by adding to mfd/sec-core.c: static const struct mfd_cell s2mps13_devs[] = { { .name = "s2mps14-rtc", } }; Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: use more standard kernel logging stylesJoe Perches2015-04-1713-24/+49
| | | | | | | | | | | | | | | | | | | | | | Neaten the logging a bit by adding #define pr_fmt Miscellanea: o Remove __FILE__/__func__ uses o Coalesce formats adding missing spaces o Align arguments o (rtc-cmos) Integrated 2 consecutive messages Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-hym8563.c: fix swapped enable/disable of clockout control bitHeiko Stübner2015-04-171-5/+5
| | | | | | | | | | | | | | | | | | The hym8563 datasheet describes the clock output control-bit as "when set to logic 0, the square wave output is enable, when set to logic 1, the CLKOUT output is inhibited". But in reality the setting is exactly opposite. Before now, the clock output was not really used, but on the rk3288 soc this generated clock is used to supply the temperature sensor block and the swapped bit value prevented it from working. With the corrected value, the tsadc now reports correct values. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-s3c.c: remove one superfluous rtc_valid_tm() checkKrzysztof Kozlowski2015-04-171-3/+1
| | | | | | | | | | | | | s3c_rtc_gettime() already returns the result of rtc_valid_tm() on the obtained time so get rid of another call to rtc_valid_tm(). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-omap.c: use module_platform_driverLokesh Vutla2015-04-171-2/+3
| | | | | | | | | | | | | | module_platform_driver_probe() prevents driver from requesting probe deferral. So using module_platform_drive() to support probe deferral. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/Kconfig: update Kconfig for OMAP RTCLokesh Vutla2015-04-171-3/+3
| | | | | | | | | | | | | | RTC is present in AM43xx and DRA7xx also. Updating the Kconfig to depend on ARCH_OMAP or ARCH_DAVINCI Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-omap.c: unlock and lock rtc registers before and after ↵Lokesh Vutla2015-04-171-11/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | register writes RTC module contains a kicker mechanism to prevent any spurious writes from changing the register values. This mechanism requires two MMR writes to the KICK0 and KICK1 registers with exact data values before the kicker lock mechanism is released. Currently the driver release the lock in the probe and leaves it enabled until the rtc driver removal. This eliminates the idea of preventing spurious writes when RTC driver is loaded. So implement rtc lock and unlock functions before and after register writes. This is as advised by Paul to implement lock and unlock functions in the driver and not to unlock and leave it in probe. The same discussion can be seen here: http://www.mail-archive.com/linux-omap%40vger.kernel.org/msg111588.html Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-s3c.c: fix failed first read of RTC timeKrzysztof Kozlowski2015-04-171-16/+16
| | | | | | | | | | | | | | | | Initialize the device time (if it is wrong) before registering RTC device to fix following error message during rtc-s3c probe: [ 2.215414] rtc (null): read_time: fail to read [ 2.216322] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: hctosys: use function name in the error logAaro Koskinen2015-04-171-1/+1
| | | | | | | | | | Use function name in the error log instead of __FILE__. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/interface.c: __rtc_read_time: reduce log levelAaro Koskinen2015-04-171-2/+3
| | | | | | | | | | | | | | | | | | | | | __rtc_read_time logs should be debug logs instead of error logs. For example, when the RTC clock is not set, it's not really useful to print a kernel error log every time someone tries to read the clock: ~ # hwclock -r [ 604.508263] rtc rtc0: read_time: fail to read hwclock: RTC_RD_TIME: Invalid argument If there's a real error, it's likely that lower level or higher level code will tell it anyway. Make these logs debug logs, and also print the error code for the read failure. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/class.c: initialize rtc name earlyAaro Koskinen2015-04-171-3/+3
| | | | | | | | | | | | | | | | | In some error cases RTC name is used before it is initialized: rtc-rs5c372 0-0032: clock needs to be set rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6 rtc (null): read_time: fail to read rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0 Fix by initializing the name early. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-s5m.c: add support for S2MPS13 RTCKrzysztof Kozlowski2015-04-171-1/+19
| | | | | | | | | | | | | The S2MPS13 RTC is almost the same as S2MPS14. The differences when updating alarm are: 1. Set WUDR+AUDR field instead of WUDR+RUDR. 2. Clear the AUDR field later (it is not auto-cleared). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: driver for Conexant Digicolor CX92755 on-chip RTCBaruch Siach2015-04-173-0/+238
| | | | | | | | | | | | Add driver for the RTC hardware block on the Conexant CX92755 SoC, from the Digicolor series of SoCs. Tested on the Equinox evaluation board for the CX92755 chip. [akpm@linux-foundation.org: build command arrays at compile-time] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-hym8563.c: return clock rate even when clock is disabledHeiko Stuebner2015-04-171-1/+1
| | | | | | | | | | | | When the clock is disabled, do not return a rate of 0 but instead return the rate the clock will be running at after it gets enabled. This prevents problems when the core clock code is trying to determine a suitable rate, while the clock is still off. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-da9052.c: register ability of alarm to wake device from suspendAdam Ward2015-04-171-0/+2
| | | | | | | | Signed-off-by: Adam Ward <adam.ward.opensource@diasemi.com> Tested-by: Adam Ward <adam.ward.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-da9052.c: add constraints to set valid yearAdam Ward2015-04-171-0/+8
| | | | | | | | Signed-off-by: Adam Ward <adam.ward.opensource@diasemi.com> Tested-by: Adam Ward <adam.ward.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-da9052.c: add extra reads with timeouts to avoid returning ↵Adam Ward2015-04-171-21/+66
| | | | | | | | | | | | | partially updated values The RTC is in a different clock domain so a quick read after write can retrieve a mangled value of the old/new values Signed-off-by: Adam Ward <adam.ward.opensource@diasemi.com> Tested-by: Adam Ward <adam.ward.opensource@diasemi.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-ds1685.c: fix sparse warningsJoshua Kinard2015-04-171-2/+2
| | | | | | | | | | | | | Fix two minor sparse warnings: CHECK drivers/rtc/rtc-ds1685.c drivers/rtc/rtc-ds1685.c:2178:1: warning: function 'ds1685_rtc_poweroff' with external linkage has definition drivers/rtc/rtc-ds1685.c:802:23: warning: Using plain integer as NULL pointer Fixes: aaaf5fbf56f1 ("rtc: add driver for DS1685 family of real time clocks") Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-ds1685.c: remove .owner assignment from platform_driverJoshua Kinard2015-04-171-1/+0
| | | | | | | | | | | The rtc driver core now sets the platform_driver 'owner' property, so remove the assignment from the DS1685 driver. Fixes: aaaf5fbf56f1: "rtc: add driver for DS1685 family of real time clocks" Signed-off-by: Joshua Kinard <kumba@gentoo.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-ab-b5ze-s3.c: constify struct regmap_configKrzysztof Kozlowski2015-04-171-1/+1
| | | | | | | | | | The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-s3c.c: delete duplicate clock controlChanwoo Choi2015-04-171-124/+39
| | | | | | | | | | | | | | | | The current functions in s3c-rtc driver execute clk_enable/disable() to control clocks and some functions execute s3c_rtc_alarm_clk_enable() unnecessarily. So this patch deletes the duplicate clock control and spilts s3c_rtc_alarm_clk_enable() out as s3c_rtc_enable_clk()/s3c_rtc_disable_clk() to improve readability. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene@kernel.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: hctosys: do not treat lack of RTC device as errorFloris Bos2015-04-171-1/+1
| | | | | | | | | | | | | | | | | When using device trees on the ARM platform, it is not certain at compile time whether or not the system will have a RTC. If one enables CONFIG_HCTOSYS just in case the system booted has a RTC, and it turns out not to be, this will result in a big fat "unable to open rtc device" error being printed to console, even when "quiet" is set in the kernel cmdline. Fix this by outputting the message with loglevel info instead. Signed-off-by: Floris Bos <bos@je-eigen-domein.nl> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-x1205.c: use sign_extend32() for sign extensionMartin Kepplinger2015-04-171-2/+2
| | | | | | | | | | Despite its name, sign_extend32() is safe to use for 8 bit types too. (See https://lkml.org/lkml/2015/1/18/289). Signed-off-by: Martin Kepplinger <martink@posteo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-em3027.c: add device tree supportPeter Robinson2015-04-171-0/+11
| | | | | | | | | | | | | Set the of_match_table for this driver so that devices can be described in the device tree. This device is used in the Trimslice and is already defined in the Trimslice device tree. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: stmp3xxx: use optional crystal in low power statesUwe Kleine-König2015-04-171-6/+60
| | | | | | | | | | | | | | | | | | | | The rtc's status register allows to determine if a 32k crystal is connected to keep the rtc running in low power states provided the corresponding fuse bits were blown correctly during production. (In case they were not, the right frequency can be stated in the device tree.) If there is no such crystal available force the 24 MHz XTAL clock to keep running to retain the right date and time. Otherwise use the crystal to save some power. It would be nice to only switch to the crystal when the XTAL clock is about to be disabled and keep the crystal off when unneeded because XTAL is always on while the chip is powered on. But as sudden power loss isn't detectable this is not save. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/rtc/rtc-pcf8563.c: simplify return from functionRobert Kmiec2015-04-171-6/+1
| | | | | | | | | | | | | This commit does not change any logic here. It just makes the code easier to read. This is how it looked like: If err != 0 return err; else return 0; Signed-off-by: Robert Kmiec <robert.r.kmiec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rtc: remove use of seq_printf return valueJoe Perches2015-04-164-28/+34
| | | | | | | | | | | | The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'mfd-for-linus-4.1' of ↵Linus Torvalds2015-04-151-60/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Rename child driver [axp288_battery => axp288_fuel_gauge]; axp20x - Rename child driver [max77693-flash => max77693-led]; max77693 - Error handling fixes; intel_soc_pmic - GPIO tweaking; intel_soc_pmic - Remove non-DT code; vexpress-sysreg, tc3589x - Remove unused/legacy code; ti_am335x_tscadc, rts5249, rtsx_gops, rtsx_pcr, rtc-s5m, sec-core, max77693, menelaus, wm5102-tables - Trivial fixups; rtsx_pci, da9150-core, sec-core, max7769, max77693, mc13xxx-core, dln2, hi6421-pmic-core, rk808, twl4030-power, lpc_ich, menelaus, twl6040 - Update register/address values; rts5227, rts5249 - DT and/or binding document fixups; arizona, da9150, mt6397, axp20x, qcom-rpm, qcom-spmi-pmic - Couple of trivial core Kconfig fixups - Remove use of seq_printf return value; ab8500-debugfs - Remove __exit markups; menelaus, tps65010 - Fix platform-device name collisions; mfd-core New drivers/supported devices: - Add support for wm8280/wm8281 into arizona - Add support for COMe-cBL6 into kempld-core - Add support for rts524a and rts525a into rts5249 - Add support for ipq8064 into qcom_rpm - Add support for extcon into axp20x - New MediaTek MT6397 PMIC driver - New Maxim MAX77843 PMIC dirver - New Intel Quark X1000 I2C-GPIO driver - New Skyworks SKY81452 driver" * tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: sec: Fix RTC alarm interrupt number on S2MPS11 mfd: wm5102: Remove registers for output 3R from readable list mfd: tps65010: Remove incorrect __exit markups mfd: devicetree: bindings: Add Qualcomm RPM regulator subnodes mfd: axp20x: Add support for extcon cell mfd: lpc_ich: Sort IDs mfd: twl6040: Remove wrong and unneeded "platform:twl6040" modalias mfd: qcom-spmi-pmic: Add specific compatible strings for Qualcomm's SPMI PMIC's mfd: axp20x: Fix duplicate const for model names mfd: menelaus: Use macro for magic number mfd: menelaus: Drop support for SW controller VCORE mfd: menelaus: Delete omap_has_menelaus mfd: arizona: Correct type of gpio_defaults mfd: lpc_ich: Sort IDs mfd: Fix a typo in Kconfig mfd: qcom_rpm: Add support for IPQ8064 mfd: devicetree: qcom_rpm: Document IPQ8064 resources mfd: core: Fix platform-device name collisions mfd: intel_quark_i2c_gpio: Don't crash if !DMI dt-bindings: Add vendor-prefix for X-Powers ...
| * rtc: s5m: Remove unused watchdog and sudden momentary power lossKrzysztof Kozlowski2015-03-031-60/+0
| | | | | | | | | | | | | | | | | | | | The WTSR (Watchdog Timer Software Reset) and SMPL (Sudden Momentary Power Loss) are never enabled. These are left-overs from board files. After removing them the driver's shutdown callback is empty so get rid of it as well. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2015-04-141-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - quite a few firmware fixes for RMI driver by Andrew Duggan - huion and uclogic drivers have been substantially overlaping in functionality laterly. This redundancy is fixed by hid-huion driver being merged into hid-uclogic; work done by Benjamin Tissoires and Nikolai Kondrashov - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg - Some of the quirks, that got separated into individual drivers, have historically had EXPERT dependency. As HID subsystem matured (as well as the individual drivers), this made less and less sense. This dependency is now being removed by patch from Jean Delvare - Logitech lg4ff driver received a couple of improvements for mode switching, by Michal Malý - multitouch driver now supports clickpads, patches by Benjamin Tissoires and Seth Forshee - hid-sensor framework received a substantial update; namely support for Custom and Generic pages is being added; work done by Srinivas Pandruvada - wacom driver received substantial update; it now supports i2c-conntected devices (Mika Westerberg), Bamboo PADs are now properly supported (Benjamin Tissoires), much improved battery reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng) - small assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) HID: sensor: Update document for custom sensor HID: sensor: Custom and Generic sensor support HID: debug: fix error handling in hid_debug_events_read() Input - mt: Fix input_mt_get_slot_by_key HID: logitech-hidpp: fix error return code HID: wacom: Add support for Cintiq 13HD Touch HID: logitech-hidpp: add a module parameter to keep firmware gestures HID: usbhid: yet another mouse with ALWAYS_POLL HID: usbhid: more mice with ALWAYS_POLL HID: wacom: set stylus_in_proximity before checking touch_down HID: wacom: use wacom_wac_finger_count_touches to set touch_down HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT HID: pidff: effect can't be NULL HID: add quirk for PIXART OEM mouse used by HP HID: add HP OEM mouse to quirk ALWAYS_POLL HID: wacom: ask for a in-prox report when it was missed HID: hid-sensor-hub: Fix sparse warning HID: hid-sensor-hub: fix attribute read for logical usage id HID: plantronics: fix Kconfig default HID: pidff: support more than one concurrent effect ...
| * \ Merge branch 'for-4.1/sensor-hub' into for-linusJiri Kosina2015-04-131-1/+1
| |\ \ | | |/ | |/| | | | | | | | | | Conflicts: drivers/iio/common/hid-sensors/hid-sensor-trigger.c include/linux/hid-sensor-hub.h
| | * HID: hid-sensor-hub: Extend API for async readsSrinivas Pandruvada2015-02-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add additional flag to read in async mode. In this mode the caller will get reply via registered callback for capture_sample. Callbacks can be registered using sensor_hub_register_callback function. The usage id parameter of the capture_sample can be matched with the usage id of the requested attribute. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | time, drivers/rtc: Don't bother with rtc_resume() for the nonstop clocksourceXunlei Pang2015-04-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a system does not provide a persistent_clock(), the time will be updated on resume by rtc_resume(). With the addition of the non-stop clocksources for suspend timing, those systems set the time on resume in timekeeping_resume(), but may not provide a valid persistent_clock(). This results in the rtc_resume() logic thinking no one has set the time and it then will over-write the suspend time again, which is not necessary and only increases clock error. So, fix this for rtc_resume(). This patch also improves the name of persistent_clock_exist to make it more grammatical. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-19-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | drivers/rtc: Remove redundant rtc_valid_tm() from rtc_resume()Xunlei Pang2015-04-031-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rtc_read_time() has already judged valid tm by rtc_valid_tm(), so just remove it. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-17-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | drivers/rtc/mxc: Update driver to address y2038/y2106 issuesXunlei Pang2015-04-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver has a number of y2038/y2106 issues. This patch resolves them by: - Replacing rtc_time_to_tm() with rtc_time64_to_tm() - Replacing rtc_tm_to_time() with rtc_tm_to_time64() - Changing mxc_rtc_set_mmss() to use rtc_class_ops's set_mmss64() After this patch, the driver should not have any remaining y2038/y2106 issues. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-14-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | drivers/rtc/mxc: Convert get_alarm_or_time()/set_alarm_or_time() to use time64_tXunlei Pang2015-04-031-15/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We want to convert mxc_rtc_set_mmss() to use rtc_class_ops's set_mmss64(), but it uses get_alarm_or_time()/set_alarm_or_time() internal interfaces which are y2038 unsafe. So here as a separate patch, it converts these two internal interfaces of "mxc" to use safe time64_t to make some preparations. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-13-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | drivers/rtc/mxc: Modify rtc_update_alarm() not to touch the alarm timeXunlei Pang2015-04-031-18/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rtc_class_ops's set_alarm() shouldn't deal with the alarm date, as this is handled in the rtc core. See rtc_dev_ioctl()'s RTC_ALM_SET and RTC_WKALM_SET cases. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-12-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | drivers/rtc/mc13xxx: Update driver to address y2038/y2106 issuesXunlei Pang2015-04-031-18/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver has a number of y2038/y2106 issues. This patch resolves them by: - Replacing rtc_time_to_tm() with rtc_time64_to_tm() - Changing mc13xxx_rtc_set_mmss() to use rtc_class_ops's set_mmss64() After this patch, the driver should not have any remaining y2038/y2106 issues. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-11-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | drivers/rtc/ab3100: Update driver to address y2038/y2106 issuesXunlei Pang2015-04-031-28/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver has a number of y2038/y2106 issues. This patch resolves them by: - Replacing rtc_tm_to_time() with rtc_tm_to_time64() - Replacing rtc_time_to_tm() with rtc_time64_to_tm() - Changing ab3100_rtc_set_mmss() to use rtc_class_ops's set_mmss64() After this patch, the driver should not have any remaining y2038/y2106 issues. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-10-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | drivers/rtc/test: Update driver to address y2038/y2106 issuesXunlei Pang2015-04-031-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver has a number of y2038/y2106 issues. This patch resolves them by: - Replacing get_seconds() with ktime_get_real_seconds() - Replacing rtc_time_to_tm() with rtc_time64_to_tm() Also add test_rtc_set_mmss64() for testing rtc_class_ops's set_mmss64(), which can be activated by "test_mmss64" module parameter. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-9-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | drivers/rtc: Provide y2038 safe rtc_class_ops.set_mmss() replacementXunlei Pang2015-04-032-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the rtc_class_op's set_mmss() function takes a 32-bit second value (on 32-bit systems), which is problematic for dates past y2038. This patch provides a safe version named set_mmss64() using y2038 safe time64_t. After this patch, set_mmss() is deprecated and all its users will be fixed to use set_mmss64(), it can be removed when having no users. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> [jstultz: Add whitespace fix for checkpatch] Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-8-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | time: Add y2038 safe update_persistent_clock64()Xunlei Pang2015-04-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As part of addressing in-kernel y2038 issues, this patch adds update_persistent_clock64() and replaces all the call sites of update_persistent_clock() with this function. This is a __weak implementation, which simply calls the existing y2038 unsafe update_persistent_clock(). This allows architecture specific implementations to be converted independently, and eventually y2038-unsafe update_persistent_clock() can be removed after all its architecture specific implementations have been converted to update_persistent_clock64(). Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-4-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | drivers/rtc/rtc-mrst: fix suspend/resumeLars-Peter Clausen2015-03-261-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Moorestown RTC driver implements suspend and resume callbacks and assigns them to the suspend and resume fields of the device_driver struct. These callbacks are never actually called by anything though. Modify the driver to properly use dev_pm_ops so that the suspend and resume functions are actually executed upon suspend/resume. [akpm@linux-foundation.org: device_driver.name is const char *] Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | rtc: at91rm9200: double locking bug in at91_rtc_interrupt()Dan Carpenter2015-03-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a typo here so we deadlock. Fixes: dd1f1f391dd7 ('rtc: at91rm9200: rework wakeup and interrupt handling') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: David Dueck <davidcdueck@googlemail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | drivers/rtc/rtc-s3c.c: add .needs_src_clk to s3c6410 RTC dataJavier Martinez Canillas2015-03-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit df9e26d093d3 ("rtc: s3c: add support for RTC of Exynos3250 SoC") added an "rtc_src" DT property to specify the clock used as a source to the S3C real-time clock. Not all SoCs needs this so commit eaf3a659086e ("drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock") changed to check the struct s3c_rtc_data .needs_src_clk to conditionally grab the clock. But that commit didn't update the data for each IP version so the RTC broke on the boards that needs a source clock. This is the case of at least Exynos5250 and Exynos5440 which uses the s3c6410 RTC IP block. This commit fixes the S3C rtc on the Exynos5250 Snow and Exynos5420 Peach Pit and Pi Chromebooks. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@linaro.org> Cc: Tyler Baker <tyler.baker@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'irq-pm'Rafael J. Wysocki2015-03-062-26/+109
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * irq-pm: genirq / PM: describe IRQF_COND_SUSPEND tty: serial: atmel: rework interrupt and wakeup handling watchdog: at91sam9: request the irq with IRQF_NO_SUSPEND clk: at91: implement suspend/resume for the PMC irqchip rtc: at91rm9200: rework wakeup and interrupt handling rtc: at91sam9: rework wakeup and interrupt handling PM / wakeup: export pm_system_wakeup symbol genirq / PM: Add flag for shared NO_SUSPEND interrupt lines genirq / PM: better describe IRQF_NO_SUSPEND semantics
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-31 00:34:56 +0100