summaryrefslogtreecommitdiffstats
path: root/drivers/s390/net (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net/smc: manage system EID in SMC stack instead of ISM driverWen Gu2023-12-262-39/+6
| | | | | | | | | | | | | | The System EID (SEID) is an internal EID that is used by the SMCv2 software stack that has a predefined and constant value representing the s390 physical machine that the OS is executing on. So it should be managed by SMC stack instead of ISM driver and be consistent for all ISMv2 device (including virtual ISM devices) on s390 architecture. Suggested-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-and-tested-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/smc: compatible with 128-bits extended GID of virtual ISM deviceWen Gu2023-12-261-8/+11
| | | | | | | | | | | According to virtual ISM support feature defined by SMCv2.1, GIDs of virtual ISM device are UUIDs defined by RFC4122, which are 128-bits long. So some adaptation work is required. And note that the GIDs of existing platform firmware ISM devices still remain 64-bits long. Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s390/ism: ism driver implies smc protocolGerd Bayer2023-11-172-48/+48
| | | | | | | | | | | | | | | | | | | | | | Since commit a72178cfe855 ("net/smc: Fix dependency of SMC on ISM") you can build the ism code without selecting the SMC network protocol. That leaves some ism functions be reported as unused. Move these functions under the conditional compile with CONFIG_SMC. Also codify the suggestion to also configure the SMC protocol in ism's Kconfig - but with an "imply" rather than a "select" as SMC depends on other config options and allow for a deliberate decision not to build SMC. Also, mention that in ISM's help. Fixes: a72178cfe855 ("net/smc: Fix dependency of SMC on ISM") Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/netdev/afd142a2-1fa0-46b9-8b2d-7652d41d3ab8@infradead.org/ Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
* s390/qeth: Fix typo 'weed' in commentKuan-Wei Chiu2023-11-071-1/+1
| | | | | | | | Replace 'weed' with 'we' in the comment. Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s390/qeth: replace deprecated strncpy with strscpyJustin Stitt2023-10-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect new_entry->dbf_name to be NUL-terminated based on its use with strcmp(): | if (strcmp(entry->dbf_name, name) == 0) { Moreover, NUL-padding is not required as new_entry is kzalloc'd just before this assignment: | new_entry = kzalloc(sizeof(struct qeth_dbf_entry), GFP_KERNEL); ... rendering any future NUL-byte assignments (like the ones strncpy() does) redundant. Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com> Tested-by: Thorsten Winkler <twinkler@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231023-strncpy-drivers-s390-net-qeth_core_main-c-v1-1-e7ce65454446@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* s390/ctcm: replace deprecated strncpy with strscpyJustin Stitt2023-10-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect chid to be NUL-terminated based on its use with format strings: CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO, "%s(%s) %s", CTCM_FUNTAIL, chid, ok ? "OK" : "failed"); Moreover, NUL-padding is not required as it is _only_ used in this one instance with a format string. Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. We can also drop the +1 from chid's declaration as we no longer need to be cautious about leaving a spot for a NUL-byte. Let's use the more idiomatic strscpy usage of (dest, src, sizeof(dest)) as this more closely ties the destination buffer to the length. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com> Tested-by: Thorsten Winkler <twinkler@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231023-strncpy-drivers-s390-net-ctcm_main-c-v1-1-265db6e78165@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net/smc: Fix dependency of SMC on ISMGerd Bayer2023-10-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When the SMC protocol is built into the kernel proper while ISM is configured to be built as module, linking the kernel fails due to unresolved dependencies out of net/smc/smc_ism.o to ism_get_smcd_ops, ism_register_client, and ism_unregister_client as reported via the linux-next test automation (see link). This however is a bug introduced a while ago. Correct the dependency list in ISM's and SMC's Kconfig to reflect the dependencies that are actually inverted. With this you cannot build a kernel with CONFIG_SMC=y and CONFIG_ISM=m. Either ISM needs to be 'y', too - or a 'n'. That way, SMC can still be configured on non-s390 architectures that do not have (nor need) an ISM driver. Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration") Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/linux-next/d53b5b50-d894-4df8-8969-fd39e63440ae@infradead.org/ Co-developed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20231006125847.1517840-1-gbayer@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-08-034-9/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. Conflicts: net/dsa/port.c 9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink") a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection") https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/ net/xdp/xsk.c 3c5b4d69c358 ("net: annotate data-races around sk->sk_mark") b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path") https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt.c 37b61cda9c16 ("bnxt: don't handle XDP in netpoll") 2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully") https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c 62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector") fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace") drivers/net/ethernet/sfc/selftest.c 55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest") ae9d445cd41f ("sfc: Miscellaneous comment removals") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * s390/qeth: Don't call dev_close/dev_open (DOWN/UP)Alexandra Winter2023-08-024-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dev_close() and dev_open() are issued to change the interface state to DOWN or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its Ipv6 addresses and routes. We don't want this in cases of device recovery (triggered by hardware or software) or when the qeth device is set offline. Setting a qeth device offline or online and device recovery actions call netif_device_detach() and/or netif_device_attach(). That will reset or set the LOWER_UP indication i.e. change the dev->state Bit __LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and still preserves the interface settings that are handled by the network stack. Don't call dev_open() nor dev_close() from the qeth device driver. Let the network stack handle this. Fixes: d4560150cb47 ("s390/qeth: call dev_close() during recovery") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390/lcs: Remove FDDI optionAlexandra Winter2023-07-262-36/+8
|/ | | | | | | | | | | | | | | | | | | | | | | | The last s390 machine that supported FDDI was z900 ('7th generation', released in 2000). The oldest machine generation currently supported by the Linux kernel is MARCH_Z10 (released 2008). If there is still a usecase for connecting a Linux on s390 instance to a LAN Channel Station (LCS), it can only do so via Ethernet. Randy Dunlap[1] found that LCS over FDDI has never worked, when FDDI was compiled as module. Instead of fixing that, remove the FDDI option from the lcs driver. While at it, make the CONFIG_LCS description a bit more helpful. References: [1] https://lore.kernel.org/netdev/20230621213742.8245-1-rdunlap@infradead.org/ Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230724131546.3597001-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge tag 'net-6.5-rc2' of ↵Linus Torvalds2023-07-131-73/+66
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter, wireless and ebpf. Current release - regressions: - netfilter: conntrack: gre: don't set assured flag for clash entries - wifi: iwlwifi: remove 'use_tfh' config to fix crash Previous releases - regressions: - ipv6: fix a potential refcount underflow for idev - icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev() - bpf: fix max stack depth check for async callbacks - eth: mlx5e: - check for NOT_READY flag state after locking - fix page_pool page fragment tracking for XDP - eth: igc: - fix tx hang issue when QBV gate is closed - fix corner cases for TSN offload - eth: octeontx2-af: Move validation of ptp pointer before its usage - eth: ena: fix shift-out-of-bounds in exponential backoff Previous releases - always broken: - core: prevent skb corruption on frag list segmentation - sched: - cls_fw: fix improper refcount update leads to use-after-free - sch_qfq: account for stab overhead in qfq_enqueue - netfilter: - report use refcount overflow - prevent OOB access in nft_byteorder_eval - wifi: mt7921e: fix init command fail with enabled device - eth: ocelot: fix oversize frame dropping for preemptible TCs - eth: fec: recycle pages for transmitted XDP frames" * tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits) selftests: tc-testing: add test for qfq with stab overhead net/sched: sch_qfq: account for stab overhead in qfq_enqueue selftests: tc-testing: add tests for qfq mtu sanity check net/sched: sch_qfq: reintroduce lmax bound check for MTU wifi: cfg80211: fix receiving mesh packets without RFC1042 header wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set() net: txgbe: fix eeprom calculation error net/sched: make psched_mtu() RTNL-less safe net: ena: fix shift-out-of-bounds in exponential backoff netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write() net/sched: flower: Ensure both minimum and maximum ports are specified MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER docs: netdev: update the URL of the status page wifi: iwlwifi: remove 'use_tfh' config to fix crash xdp: use trusted arguments in XDP hints kfuncs bpf: cpumap: Fix memory leak in cpu_map_update_elem wifi: airo: avoid uninitialized warning in airo_get_rate() octeontx2-pf: Add additional check for MCAM rules net: dsa: Removed unneeded of_node_put in felix_parse_ports_node net: fec: use netdev_err_once() instead of netdev_err() ...
| * s390/ism: Do not unregister clients with registered DMBsNiklas Schnelle2023-07-081-10/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | When ism_unregister_client() is called but the client still has DMBs registered it returns -EBUSY and prints an error. This only happens after the client has already been unregistered however. This is unexpected as the unregister claims to have failed. Furthermore as this implies a client bug a WARN() is more appropriate. Thus move the deregistration after the check and use WARN(). Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * s390/ism: Fix and simplify add()/remove() callback handlingNiklas Schnelle2023-07-081-62/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously the clients_lock was protecting the clients array against concurrent addition/removal of clients but was also accessed from IRQ context. This meant that it had to be a spinlock and that the add() and remove() callbacks in which clients need to do allocation and take mutexes can't be called under the clients_lock. To work around this these callbacks were moved to workqueues. This not only introduced significant complexity but is also subtly broken in at least one way. In ism_dev_init() and ism_dev_exit() clients[i]->tgt_ism is used to communicate the added/removed ISM device to the work function. While write access to client[i]->tgt_ism is protected by the clients_lock and the code waits that there is no pending add/remove work before and after setting clients[i]->tgt_ism this is not enough. The problem is that the wait happens based on per ISM device counters. Thus a concurrent ism_dev_init()/ism_dev_exit() for a different ISM device may overwrite a clients[i]->tgt_ism between unlocking the clients_lock and the subsequent wait for the work to finnish. Thankfully with the clients_lock no longer held in IRQ context it can be turned into a mutex which can be held during the calls to add()/remove() completely removing the need for the workqueues and the associated broken housekeeping including the per ISM device counters and the clients[i]->tgt_ism. Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * s390/ism: Fix locking for forwarding of IRQs and events to clientsNiklas Schnelle2023-07-081-8/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clients array references all registered clients and is protected by the clients_lock. Besides its use as general list of clients the clients array is accessed in ism_handle_irq() to forward ISM device events to clients. While the clients_lock is taken in the IRQ handler when calling handle_event() it is however incorrectly not held during the client->handle_irq() call and for the preceding clients[] access leaving it unprotected against concurrent client (un-)registration. Furthermore the accesses to ism->sba_client_arr[] in ism_register_dmb() and ism_unregister_dmb() are not protected by any lock. This is especially problematic as the client ID from the ism->sba_client_arr[] is not checked against NO_CLIENT and neither is the client pointer checked. Instead of expanding the use of the clients_lock further add a separate array in struct ism_dev which references clients subscribed to the device's events and IRQs. This array is protected by ism->lock which is already taken in ism_handle_irq() and can be taken outside the IRQ handler when adding/removing subscribers or the accessing ism->sba_client_arr[]. This also means that the clients_lock is no longer taken in IRQ context. Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 's390-6.5-2' of ↵Linus Torvalds2023-07-062-6/+6
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Alexander Gordeev: - Fix virtual vs physical address confusion in vmem_add_range() and vmem_remove_range() functions - Include <linux/io.h> instead of <asm/io.h> and <asm-generic/io.h> throughout s390 code - Make all PSW related defines also available for assembler files. Remove PSW_DEFAULT_KEY define from uapi for that - When adding an undefined symbol the build still succeeds, but userspace crashes trying to execute VDSO, because the symbol is not resolved. Add undefined symbols check to prevent that - Use kvmalloc_array() instead of kzalloc() for allocaton of 256k memory when executing s390 crypto adapter IOCTL - Add -fPIE flag to prevent decompressor misaligned symbol build error with clang - Use .balign instead of .align everywhere. This is a no-op for s390, but with this there no mix in using .align and .balign anymore - Filter out -mno-pic-data-is-text-relative flag when compiling kernel to prevent VDSO build error - Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS mask directly - Do not retry administrative requests to some s390 crypto cards, since the firmware assumes replay attacks - Remove most of the debug code, which is build in when kernel config option CONFIG_ZCRYPT_DEBUG is enabled - Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch off the multiple devices support for the s390 zcrypt device driver - With the conversion to generic entry machine checks are accounted to the current context instead of irq time. As result, the STCKF instruction at the beginning of the machine check handler and the lowcore member are no longer required, therefore remove it - Fix various typos found with codespell - Minor cleanups to CPU-measurement Counter and Sampling Facilities code - Revert patch that removes VMEM_MAX_PHYS macro, since it causes a regression * tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (25 commits) Revert "s390/mm: get rid of VMEM_MAX_PHYS macro" s390/cpum_sf: remove check on CPU being online s390/cpum_sf: handle casts consistently s390/cpum_sf: remove unnecessary debug statement s390/cpum_sf: remove parameter in call to pr_err s390/cpum_sf: simplify function setup_pmu_cpu s390/cpum_cf: remove unneeded debug statements s390/entry: remove mcck clock s390: fix various typos s390/zcrypt: remove ZCRYPT_MULTIDEVNODES kernel config option s390/zcrypt: do not retry administrative requests s390/zcrypt: cleanup some debug code s390/entry: rework entering DAT-on mode on CPU restart s390/mm: fence off VM macros from asm and linker s390: include linux/io.h instead of asm/io.h s390/ptrace: make all psw related defines also available for asm s390/ptrace: remove PSW_DEFAULT_KEY from uapi s390/vdso: filter out mno-pic-data-is-text-relative cflag s390: consistently use .balign instead of .align s390/decompressor: fix misaligned symbol build error ...
| * s390: include linux/io.h instead of asm/io.hHeiko Carstens2023-07-032-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include linux/io.h instead of asm/io.h everywhere. linux/io.h includes asm/io.h, so this shouldn't cause any problems. Instead this might help for some randconfig build errors which were reported due to some undefined io related functions. Also move the changed include so it stays grouped together with other includes from the same directory. For ctcm_mpc.c also remove not needed comments (actually questions). Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
* | s390/qeth: Fix vipa deletionThorsten Winkler2023-07-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change boolean parameter of function "qeth_l3_vipa_store" inside the "qeth_l3_dev_vipa_del4_store" function from "true" to "false" because "true" is used for adding a virtual ip address and "false" for deleting. Fixes: 2390166a6b45 ("s390/qeth: clean up L3 sysfs code") Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | revert "s390/net: lcs: use IS_ENABLED() for kconfig detection"Randy Dunlap2023-06-251-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The referenced patch is causing build errors when ETHERNET=y and FDDI=m. While we work out the preferred patch(es), revert this patch to make the pain go away. Fixes: 128272336120 ("s390/net: lcs: use IS_ENABLED() for kconfig detection") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: lore.kernel.org/r/202306202129.pl0AqK8G-lkp@intel.com Cc: Alexandra Winter <wintera@linux.ibm.com> Cc: Wenjia Zhang <wenjia@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230622155409.27311-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | s390/ctcm: Convert sprintf/snprintf to scnprintfThorsten Winkler2023-06-235-30/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This LWN article explains the why scnprintf is preferred over snprintf in general https://lwn.net/Articles/69419/ Ie. snprintf() returns what *would* be the resulting length, while scnprintf() returns the actual length. Note that ctcm_print_statistics() writes the data into the kernel log and is therefore not suitable for sysfs_emit(). Observable behavior is not changed, as there may be dependencies. Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | s390/ctcm: Convert sysfs sprintf to sysfs_emitThorsten Winkler2023-06-231-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Following the advice of the Documentation/filesystems/sysfs.rst. All sysfs related show()-functions should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | s390/lcs: Convert sprintf to scnprintfThorsten Winkler2023-06-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This LWN article explains the why scnprintf is preferred over snprintf in general https://lwn.net/Articles/69419/ Ie. snprintf() returns what *would* be the resulting length, while scnprintf() returns the actual length. Reported-by: Jules Irenge <jbi.octave@gmail.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | s390/lcs: Convert sysfs sprintf to sysfs_emitThorsten Winkler2023-06-231-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following the advice of the Documentation/filesystems/sysfs.rst. All sysfs related show()-functions should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. While at it, follow Linux kernel coding style and unify indentation Reported-by: Jules Irenge <jbi.octave@gmail.com> Reported-by: Joe Perches <joe@perches.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | s390/net: lcs: use IS_ENABLED() for kconfig detectionRandy Dunlap2023-06-161-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_ETHERNET=m or CONFIG_FDDI=m, lcs.s has build errors or warnings: ../drivers/s390/net/lcs.c:40:2: error: #error Cannot compile lcs.c without some net devices switched on. 40 | #error Cannot compile lcs.c without some net devices switched on. ../drivers/s390/net/lcs.c: In function 'lcs_startlan_auto': ../drivers/s390/net/lcs.c:1601:13: warning: unused variable 'rc' [-Wunused-variable] 1601 | int rc; Solve this by using IS_ENABLED(CONFIG_symbol) instead of ifdef CONFIG_symbol. The latter only works for builtin (=y) values while IS_ENABLED() works for builtin or modular values. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alexandra Winter <wintera@linux.ibm.com> Cc: Wenjia Zhang <wenjia@linux.ibm.com> Cc: linux-s390@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2023-06-161-8/+0
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR. Conflicts: include/linux/mlx5/driver.h 617f5db1a626 ("RDMA/mlx5: Fix affinity assignment") dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports") https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported") 425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not") 45b1a1227a7a ("mptcp: introduces more address related mibs") 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * s390/ism: Fix trying to free already-freed IRQ by repeated ism_dev_exit()Julian Ruess2023-06-151-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch prevents the system from crashing when unloading the ISM module. How to reproduce: Attach an ISM device and execute 'rmmod ism'. Error-Log: - Trying to free already-free IRQ 0 - WARNING: CPU: 1 PID: 966 at kernel/irq/manage.c:1890 free_irq+0x140/0x540 After calling ism_dev_exit() for each ISM device in the exit routine, pci_unregister_driver() will execute ism_remove() for each ISM device. Because ism_remove() also calls ism_dev_exit(), free_irq(pci_irq_vector(pdev, 0), ism) is called twice for each ISM device. This results in a crash with the error 'Trying to free already-free IRQ'. In the exit routine, it is enough to call pci_unregister_driver() because it ensures that ism_dev_exit() is called once per ISM device. Cc: <stable@vger.kernel.org> # 6.3+ Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration") Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Julian Ruess <julianr@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390/ism: Set DMA coherent maskNiklas Schnelle2023-05-251-1/+1
|/ | | | | | | | | | | | | | | | | | | | A future change will convert the DMA API implementation from the architecture specific arch/s390/pci/pci_dma.c to using the common code drivers/iommu/dma-iommu.c which the utilizes the same IOMMU hardware through the s390-iommu driver. Unlike the s390 specific DMA API this requires devices to correctly set the coherent mask to be allowed to use IOVAs >2^32 in dma_alloc_coherent(). This was however not done for ISM devices. ISM requires such addresses since currently the DMA aperture for PCI devices starts at 2^32 and all calls to dma_alloc_coherent() would thus fail. Link: https://lore.kernel.org/all/20230310-dma_iommu-v9-1-65bb8edd2beb@linux.ibm.com/ Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230524075411.3734141-1-schnelle@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* net/ism: Remove redundant pci_clear_masterCai Huoqing2023-03-241-2/+0
| | | | | | | | | | | | | | | | | | | | | | | Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ism: Remove extra includeStefan Raspl2023-03-151-1/+0
| | | | | | | Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/smc: Introduce explicit check for v2 supportStefan Raspl2023-03-151-0/+7
| | | | | | | | | | | | | Previously, v2 support was derived from a very specific format of the SEID as part of the SMC-D codebase. Make this part of the SMC-D device API, so implementers do not need to adhere to a specific SEID format. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s390/qeth: Convert sprintf/snprintf to scnprintfThorsten Winkler2023-02-115-39/+42
| | | | | | | | | | | | | This LWN article explains the rationale for this change https: //lwn.net/Articles/69419/ Ie. snprintf() returns what *would* be the resulting length, while scnprintf() returns the actual length. Reported-by: Jules Irenge <jbi.octave@gmail.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* s390/qeth: Convert sysfs sprintf to sysfs_emitThorsten Winkler2023-02-113-98/+73
| | | | | | | | | | | | | | Following the advice of the Documentation/filesystems/sysfs.rst. All sysfs related show()-functions should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Reported-by: Jules Irenge <jbi.octave@gmail.com> Reported-by: Joe Perches <joe@perches.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* s390/qeth: Use constant for IP address buffersThorsten Winkler2023-02-112-4/+5
| | | | | | | | | | | Use INET6_ADDRSTRLEN constant with size of 48 which be used for char arrays storing ip addresses (for IPv4 and IPv6) Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* s390/ctcm: cleanup indentingAlexandra Winter2023-02-113-31/+32
| | | | | | | | | Get rid of multiple smatch warnings, like: warn: inconsistent indenting Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net/smc: De-tangle ism and smc device initializationStefan Raspl2023-01-251-13/+12
| | | | | | | | | | | | | | The struct device for ISM devices was part of struct smcd_dev. Move to struct ism_dev, provide a new API call in struct smcd_ops, and convert existing SMCD code accordingly. Furthermore, remove struct smcd_dev from struct ism_dev. This is the final part of a bigger overhaul of the interfaces between SMC and ISM. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s390/ism: Consolidate SMC-D-related codeStefan Raspl2023-01-251-63/+99
| | | | | | | | | | | | | | The ism module had SMC-D-specific code sprinkled across the entire module. We are now consolidating the SMC-D-specific parts into the latter parts of the module, so it becomes more clear what code is intended for use with ISM, and which parts are glue code for usage in the context of SMC-D. This is the fourth part of a bigger overhaul of the interfaces between SMC and ISM. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/smc: Separate SMC-D and ISM APIsStefan Raspl2023-01-251-29/+63
| | | | | | | | | | | | | | | | We separate the code implementing the struct smcd_ops API in the ISM device driver from the functions that may be used by other exploiters of ISM devices. Note: We start out small, and don't offer the whole breadth of the ISM device for public use, as many functions are specific to or likely only ever used in the context of SMC-D. This is the third part of a bigger overhaul of the interfaces between SMC and ISM. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/smc: Register SMC-D as ISM clientStefan Raspl2023-01-251-5/+0
| | | | | | | | | | | Register the smc module with the new ism device driver API. This is the second part of a bigger overhaul of the interfaces between SMC and ISM. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ism: Add new API for client registrationStefan Raspl2023-01-252-25/+165
| | | | | | | | | | | | | | | Add a new API that allows other drivers to concurrently access ISM devices. To do so, we introduce a new API that allows other modules to register for ISM device usage. Furthermore, we move the GID to struct ism, where it belongs conceptually, and rename and relocate struct smcd_event to struct ism_event. This is the first part of a bigger overhaul of the interfaces between SMC and ISM. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s390/ism: Introduce struct ism_dmbStefan Raspl2023-01-252-6/+17
| | | | | | | | | | | | | | | Conceptually, a DMB is a structure that belongs to ISM devices. However, SMC currently 'owns' this structure. So future exploiters of ISM devices would be forced to include SMC headers to work - which is just weird. Therefore, we switch ISM to struct ism_dmb, introduce a new public header with the definition (will be populated with further API calls later on), and, add a thin wrapper to please SMC. Since structs smcd_dmb and ism_dmb are identical, we can simply convert between the two for now. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ism: Add missing calls to disable bus-masteringStefan Raspl2023-01-251-0/+2
| | | | | | | Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s390/qeth: convert sysfs snprintf to sysfs_emitXuezhi Zhang2022-12-281-6/+6
| | | | | | | | | Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'net-next-6.2' of ↵Linus Torvalds2022-12-143-22/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-12-091-1/+1
| |\ | | | | | | | | | | | | | | | No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | s390/lcs: Fix return type of lcs_start_xmit()Nathan Chancellor2022-11-071-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/lcs.c:2090:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = lcs_start_xmit, ^~~~~~~~~~~~~~ drivers/s390/net/lcs.c:2097:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = lcs_start_xmit, ^~~~~~~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of lcs_start_xmit() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | s390/netiucv: Fix return type of netiucv_tx()Nathan Chancellor2022-11-071-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = netiucv_tx, ^~~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of netiucv_tx() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Additionally, while in the area, remove a comment block that is no longer relevant. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | s390/ctcm: Fix return type of ctc{mp,}m_tx()Nathan Chancellor2022-11-071-9/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/ctcm_main.c:1064:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = ctcm_tx, ^~~~~~~ drivers/s390/net/ctcm_main.c:1072:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = ctcmpc_tx, ^~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of ctc{mp,}m_tx() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Additionally, while in the area, remove a comment block that is no longer relevant. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge tag 'dma-mapping-6.2-2022-12-13' of ↵Linus Torvalds2022-12-131-1/+2
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - reduce the swiotlb buffer size on allocation failure (Alexey Kardashevskiy) - clean up passing of bogus GFP flags to the dma-coherent allocator (Christoph Hellwig) * tag 'dma-mapping-6.2-2022-12-13' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: reject __GFP_COMP in dma_alloc_attrs ALSA: memalloc: don't pass bogus GFP_ flags to dma_alloc_* s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent cnic: don't pass bogus GFP_ flags to dma_alloc_coherent RDMA/qib: don't pass bogus GFP_ flags to dma_alloc_coherent RDMA/hfi1: don't pass bogus GFP_ flags to dma_alloc_coherent media: videobuf-dma-contig: use dma_mmap_coherent swiotlb: reduce the swiotlb buffer size on allocation failure
| * | s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherentChristoph Hellwig2022-11-211-1/+2
| |/ | | | | | | | | | | | | | | | | | | dma_alloc_coherent is an opaque allocator that only uses the GFP_ flags for allocation context control. Don't pass __GFP_COMP which makes no sense for an allocation that can't in any way be converted to a page pointer. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
* / s390/qeth: fix use-after-free in hsciAlexandra Winter2022-12-081-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KASAN found that addr was dereferenced after br2dev_event_work was freed. ================================================================== BUG: KASAN: use-after-free in qeth_l2_br2dev_worker+0x5ba/0x6b0 Read of size 1 at addr 00000000fdcea440 by task kworker/u760:4/540 CPU: 17 PID: 540 Comm: kworker/u760:4 Tainted: G E 6.1.0-20221128.rc7.git1.5aa3bed4ce83.300.fc36.s390x+kasan #1 Hardware name: IBM 8561 T01 703 (LPAR) Workqueue: 0.0.8000_event qeth_l2_br2dev_worker Call Trace: [<000000016944d4ce>] dump_stack_lvl+0xc6/0xf8 [<000000016942cd9c>] print_address_description.constprop.0+0x34/0x2a0 [<000000016942d118>] print_report+0x110/0x1f8 [<0000000167a7bd04>] kasan_report+0xfc/0x128 [<000000016938d79a>] qeth_l2_br2dev_worker+0x5ba/0x6b0 [<00000001673edd1e>] process_one_work+0x76e/0x1128 [<00000001673ee85c>] worker_thread+0x184/0x1098 [<000000016740718a>] kthread+0x26a/0x310 [<00000001672c606a>] __ret_from_fork+0x8a/0xe8 [<00000001694711da>] ret_from_fork+0xa/0x40 Allocated by task 108338: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 __kasan_kmalloc+0xa0/0xc0 qeth_l2_switchdev_event+0x25a/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Freed by task 540: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 kasan_save_free_info+0x4c/0x68 ____kasan_slab_free+0x14e/0x1a8 __kasan_slab_free+0x24/0x30 __kmem_cache_free+0x168/0x338 qeth_l2_br2dev_worker+0x154/0x6b0 process_one_work+0x76e/0x1128 worker_thread+0x184/0x1098 kthread+0x26a/0x310 __ret_from_fork+0x8a/0xe8 ret_from_fork+0xa/0x40 Last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 insert_work+0x56/0x2e8 __queue_work+0x4ce/0xd10 queue_work_on+0xf4/0x100 qeth_l2_switchdev_event+0x520/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Second to last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 kvfree_call_rcu+0xb2/0x760 kernfs_unlink_open_file+0x348/0x430 kernfs_fop_release+0xc2/0x320 __fput+0x1ae/0x768 task_work_run+0x1bc/0x298 exit_to_user_mode_prepare+0x1a0/0x1a8 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 The buggy address belongs to the object at 00000000fdcea400 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 64 bytes inside of 96-byte region [00000000fdcea400, 00000000fdcea460) The buggy address belongs to the physical page: page:000000005a9c26e8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xfdcea flags: 0x3ffff00000000200(slab|node=0|zone=1|lastcpupid=0x1ffff) raw: 3ffff00000000200 0000000000000000 0000000100000122 000000008008cc00 raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 00000000fdcea300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc 00000000fdcea380: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc >00000000fdcea400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ 00000000fdcea480: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc 00000000fdcea500: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ================================================================== Fixes: f7936b7b2663 ("s390/qeth: Update MACs of LEARNING_SYNC device") Reported-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com> Link: https://lore.kernel.org/r/20221207105304.20494-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge tag 's390-6.1-1' of ↵Linus Torvalds2022-10-093-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Make use of the IBM z16 processor activity instrumentation facility extension to count neural network processor assist operations: add a new PMU device driver so that perf can make use of this. - Rework memcpy_real() to avoid DAT-off mode. - Rework absolute lowcore access code. - Various small fixes and improvements all over the code. * tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: remove unused bus_next field from struct zpci_dev s390/cio: remove unused ccw_device_force_console() declaration s390/pai: Add support for PAI Extension 1 NNPA counters s390/mm: fix no previous prototype warnings in maccess.c s390/mm: uninline copy_oldmem_kernel() function s390/mm,ptdump: add real memory copy page markers s390/mm: rework memcpy_real() to avoid DAT-off mode s390/dump: save IPL CPU registers once DAT is available s390/pci: convert high_memory to physical address s390/smp,ptdump: add absolute lowcore markers s390/smp: rework absolute lowcore access s390/smp: call smp_reinit_ipl_cpu() before scheduler is available s390/ptdump: add missing amode31 markers s390/mm: split lowcore pages with set_memory_4k() s390/mm: remove unused access parameter from do_fault_error() s390/delay: sync comment within __delay() with reality s390: move from strlcpy with unused retval to strscpy
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-08 13:04:05 +0100