summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/isci/host.h (follow)
Commit message (Collapse)AuthorAgeFilesLines
* scsi: isci: switch to pci_alloc_irq_vectorsChristoph Hellwig2016-12-011-1/+0
| | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* [SCSI] isci: correct erroneous for_each_isci_host macroLukasz Dorau2014-03-101-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the first place, the loop 'for' in the macro 'for_each_isci_host' (drivers/scsi/isci/host.h:314) is incorrect, because it accesses the 3rd element of 2 element array. After the 2nd iteration it executes the instruction: ihost = to_pci_info(pdev)->hosts[2] (while the size of the 'hosts' array equals 2) and reads an out of range element. In the second place, this loop is incorrectly optimized by GCC v4.8 (see http://marc.info/?l=linux-kernel&m=138998871911336&w=2). As a result, on platforms with two SCU controllers, the loop is executed more times than it can be (for i=0,1 and 2). It causes kernel panic during entering the S3 state and the following oops after 'rmmod isci': BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8131360b>] __list_add+0x1b/0xc0 Oops: 0000 [#1] SMP RIP: 0010:[<ffffffff8131360b>] [<ffffffff8131360b>] __list_add+0x1b/0xc0 Call Trace: [<ffffffff81661b84>] __mutex_lock_slowpath+0x114/0x1b0 [<ffffffff81661c3f>] mutex_lock+0x1f/0x30 [<ffffffffa03e97cb>] sas_disable_events+0x1b/0x50 [libsas] [<ffffffffa03e9818>] sas_unregister_ha+0x18/0x60 [libsas] [<ffffffffa040316e>] isci_unregister+0x1e/0x40 [isci] [<ffffffffa0403efd>] isci_pci_remove+0x5d/0x100 [isci] [<ffffffff813391cb>] pci_device_remove+0x3b/0xb0 [<ffffffff813fbf7f>] __device_release_driver+0x7f/0xf0 [<ffffffff813fc8f8>] driver_detach+0xa8/0xb0 [<ffffffff813fbb8b>] bus_remove_driver+0x9b/0x120 [<ffffffff813fcf2c>] driver_unregister+0x2c/0x50 [<ffffffff813381f3>] pci_unregister_driver+0x23/0x80 [<ffffffffa04152f8>] isci_exit+0x10/0x1e [isci] [<ffffffff810d199b>] SyS_delete_module+0x16b/0x2d0 [<ffffffff81012a21>] ? do_notify_resume+0x61/0xa0 [<ffffffff8166ce29>] system_call_fastpath+0x16/0x1b The loop has been corrected. This patch fixes kernel panic during entering the S3 state and the above oops. Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com> Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Tested-by: Lukasz Dorau <lukasz.dorau@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: implement suspend/resume supportArtur Wojcik2012-08-241-1/+1
| | | | | | | | | | | | | | Provide a "simple-dev-pm-ops" implementation that shuts down the domain and the device on suspend, and resumes the device and the domain on resume. All of the mechanics of restoring domain connectivity are handled by libsas once isci has notified libsas that all links should be back up. libsas is in charge of handling links that did not resume, or resumed out of order. Signed-off-by: Artur Wojcik <artur.wojcik@intel.com> Signed-off-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* isci: End the RNC resumption wait when the RNC is destroyed.Jeff Skirvin2012-05-171-0/+5
| | | | | | | | | While the RNC is suspended for I/O cleanup, the remote device can be stopped and the RNC setup for destruction. These changes accomodate that case in the abort path. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: Remove obviated host callback list.Jeff Skirvin2012-05-171-1/+1
| | | | | | | | | Since the callbacks to libsas now occur under scic_lock, there is no longer any reason to save the completed requests in a separate list for completion to libsas. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: Redesign device suspension, abort, cleanup.Jeff Skirvin2012-05-171-1/+0
| | | | | | | | | | | | | | | This commit changes the means by which outstanding I/Os are handled for cleanup. The likelihood is that this commit will be broken into smaller pieces, however that will be a later revision. Among the changes: - All completion structures have been removed from the tmf and abort paths. - Now using one completed I/O list, with the I/O completed in host bit being used to select error or normal callback paths. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: kill isci_host.shostDan Williams2012-05-171-1/+5
| | | | | | | | We can retrieve the shost from the sas_ha like the rest of libsas and drop this out of our local data structure. Acked-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: fix interrupt disableDan Williams2012-05-171-0/+1
| | | | | | | | | | | | | | | | There is a (dubious?) lost irq workaround in sci_controller_isr() that effectively nullifies attempts to disable interrupts. Until the workaround can be re-evaluated add some infrastructure to prevent the interrupt handler from inadvertantly re-enabling interrupts. The failure mode was interrupts continuing to run after the driver had been removed and its iomappings torn down. Reported-by: Jacek Danecki <jacek.danecki@intel.com> Tested-by: Jacek Danecki <jacek.danecki@intel.com> [richard: clear remaining interrupts at the end of reset] Acked-by: Richard Boyd <richard.g.boyd@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: fix 'link-up' events occur after 'start-complete'Dan Williams2012-05-171-0/+3
| | | | | | | | | | | | | | | | The call to wait_for_start() is meant to ensure that all links have been given a chance to come up before letting the kernel proceed with probing. However, the implementation is not correctly syncing with the port configuration agent. In the MPC case the ports are hard-coded, in the APC case we need to wait for the port-configuration to form ports from the started phys. Towards that end increase the timeout for the APC agent to form ports, and delay start complete until all phys are out of link-training. Cc: <stable@vger.kernel.org> Cc: Richard Boyd <richard.g.boyd@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: fix controller stopDan Williams2012-05-171-7/+1
| | | | | | | | | 1/ notify waiters when controller stop completes (fixes 10 second stall unloading the driver) 2/ make sure phy stop is after port and device stop Cc: Richard Boyd <richard.g.boyd@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: refactor initialization for S3/S4Dan Williams2012-05-171-52/+19
| | | | | | | | | | | | | | | | | | | | | | | | Based on an original implementation by Ed Nadolski and Artur Wojcik In preparation for S3/S4 support refactor initialization so that driver-load and resume-from-suspend can share the common init path of isci_host_init(). Organize the initialization into objects that are self-contained to the driver (initialized by isci_host_init) versus those that have some upward registration (initialized at allocation time asd_sas_phy, asd_sas_port, dma allocations). The largest change is moving the the validation of the oem and module parameters from isci_host_init() to isci_host_alloc(). The S3/S4 approach being taken is that libsas will be tasked with remembering the state of the domain and the lldd is free to be forgetful. In the case of isci we'll just re-init using a subset of the normal driver load path. [clean up some unused / mis-indented function definitions in host.h] Signed-off-by: Ed Nadolski <edmund.nadolski@intel.com> Signed-off-by: Artur Wojcik <artur.wojcik@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: kill ->status, and ->state_lock in isci_hostDan Williams2012-05-171-23/+0
| | | | | | They serve no incremental purpose over the existing sas_ha state. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: kill ->is_direct_attachedDan Williams2012-05-171-2/+2
| | | | | | | | | domain_device ->parent conveys the same information. Occurrences of ->is_direct_attached appear next to incomplete open-coded versions of dev_is_sata(), clean those up as well. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* [SCSI] isci: kill iphy->isci_port lookupsDan Williams2012-02-291-18/+1
| | | | | | | | | | | | | | | | | | | | | | | This field is a holdover from the OS abstraction conversion. The stable phy to port lookups are done via iphy->ownining_port under scic_lock. After this conversion to use port->lldd_port the only volatile lookup is the initial lookup in isci_port_formed(). After that point any lookup via a successfully notified domain_device is guaranteed to be valid until the domain_device is destroyed. Delete ->start_complete as it is only set once and is set as a consequence of the port going link up, by definition of getting a port formed event the port is "ready". While we are correcting port lookups also move the asd_sas_port table out from under the isci_port. This is to preclude any temptation to use container_of() to convert an asd_sas_port to an isci_port, the association is dynamic and under libsas control. Tested-by: Maciej Trela <maciej.trela@intel.com> [dmilburn@redhat.com: fix i686 compile error] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: oem parameter format v1.3 (cable select)Jeff Skirvin2012-01-161-0/+18
| | | | | | | | | | | | v1.3 allows the attenuation of the attached cables to be specified to the driver in terms of 'short', 'medium', and 'long' (see probe_roms.h). These settings (per phy) are retrieved from the platform oem-parameters (BIOS rom) or via a module parameter override. Reviewed-by: Jiangbi Liu <jiangbi.liu@intel.com> Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: update afe (analog-front-end) recipe for C1Jeff Skirvin2012-01-161-1/+8
| | | | | | | | | | | | | C1 silicon requires updates to the phy tuning recipe and also support for user provided cable selects (per-phy) for short, medium, and long cables. Default to 'short' awaiting support for selecting the cable via oem parameters. Reviewed-by: Jiangbi Liu <jiangbi.liu@intel.com> Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com> Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: initial sgpio write supportDan Williams2011-09-221-0/+15
| | | | | | | | | | | | Basic support to initialize the gpio unit, accept an incomming SAS_GPIO_REG_TX_GP bitstream, and translate it to the ODx.n fields in the hardware registers. If register indexes outside the supported range are specified in the SMP frame we simply accept the write and return how many registers (SFF-8485) were written (libsas reports this as residue in the request). Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: dynamic interrupt coalescingDan Williams2011-08-241-0/+3
| | | | | | | | | | | | | | | Hardware allows both an outstanding number commands and a timeout value (whichever occurs first) as a gate to the next interrupt generation. This scheme at completion time looks at the remaining number of outstanding tasks and sets the timeout to maximize small transaction operation. If transactions are large (take more than a few 10s of microseconds to complete) then performance is not interrupt processing bound, so the small timeouts this scheme generates are overridden by the time it takes for a completion to arrive. Tested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* isci: cleanup silicon revision detectionDan Williams2011-07-031-20/+12
| | | | | | | | | Perform checking per-pci device (even though all systems will only have 1 pci device in this generation), and delete support for silicon that does not report a proper revision (i.e. A0). Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: merge scu_unsolicited_frame.h into unsolicited_frame_control.hDan Williams2011-07-031-1/+0
| | | | | | Does not need its own file. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: kill 'get/set' macrosDan Williams2011-07-031-17/+3
| | | | | | | | | Most of these simple dereference macros are longer than their open coded equivalent. Deleting enum sci_controller_mode is thrown in for good measure. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: retire scic_sds_ and scic_ prefixesDan Williams2011-07-031-48/+45
| | | | | | | | | | | | | | The distinction between scic_sds_ scic_ and sci_ are no longer relevant so just unify the prefixes on sci_. The distinction between isci_ and sci_ is historically significant, and useful for comparing the old 'core' to the current Linux driver. 'sci_' represents the former core as well as the routines that are closer to the hardware and protocol than their 'isci_' brethren. sci == sas controller interface. Also unwind the 'sds1' out of the parameter structs. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify isci_host and scic_sds_controllerDan Williams2011-07-031-164/+46
| | | | | | | | | Remove the distinction between these two implementations and unify on isci_host (local instances named ihost). Hmmm, we had two 'oem_parameters' instances, one was unused... nice. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify isci_remote_device and scic_sds_remote_deviceDan Williams2011-07-031-15/+12
| | | | | | | | Remove the distinction between these two implementations and unify on isci_remote_device (local instances named idev). Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify isci_port and scic_sds_portDan Williams2011-07-031-6/+5
| | | | | | | | | | Remove the distinction between these two implementations and unify on isci_port (local instances named iport). The duplicate '->owning_port' and '->isci_port' in both isci_phy and isci_remote_device will be fixed in a later patch... this is just the straightforward rename/unification. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify isci_phy and scic_sds_phyDan Williams2011-07-031-9/+8
| | | | | | | | | They are one in the same object so remove the distinction. The near duplicate fields (owning_port, and isci_port) will be cleaned up after the scic_sds_port isci_port unification. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify isci_request and scic_sds_requestDan Williams2011-07-031-8/+8
| | | | | | | | | They are one in the same object so remove the distinction. The near duplicate fields (owning_controller, and isci_host) will be cleaned up after the scic_sds_contoller isci_host unification. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: preallocate requestsDan Williams2011-07-031-10/+1
| | | | | | | | | | | the dma_pool interface is optimized for object_size << page_size which is not the case with isci_request objects and the dma_pool routines show up in the top of the profile. The old io_request_table which tracked whether tci slots were in-flight or not is replaced with an IREQ_ACTIVE flag per request. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify can_queue tracking on the tci_pool, uplevel tag assignmentDan Williams2011-07-031-49/+6
| | | | | | | | | | | | | | | | | | | | | | The tci_pool tracks our outstanding command slots which are also the 'index' portion of our tags. Grabbing the tag early in ->lldd_execute_task let's us drop the isci_host_can_queue() and ->was_tag_assigned_by_user infrastructure. ->was_tag_assigned_by_user required the task context to be duplicated in request-local buffer. With the tci established early we can build the task_context directly into its final location and skip a memcpy. With the task context buffer at a known address at request construction we have the opportunity/obligation to also fix sgl handling. This rework feels like it belongs in another patch but the sgl handling and task_context are too intertwined. 1/ fix the 'ab' pair embedded in the task context to point to the 'cd' pair in the task context (previously we were prematurely linking to the staging buffer). 2/ fix the broken iteration of pio sgls that assumes all sgls are relative to the request, and does a dangerous looking reverse lookup of physical address to virtual address. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: kill device_sequenceDan Williams2011-07-031-9/+0
| | | | | | | | Now that we have upleveled device reassignment protection to the isci_remote_device reference count we no longer need this level of self-defense. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: cleanup/optimize queue increment macrosDan Williams2011-07-031-16/+0
| | | | | | | | | | | | Every single i/o or event completion incurs a test and branch to see if the cycle bit changed. For power-of-2 queue sizes the cycle bit can be read directly from the rollover of the queue pointer. Likely premature optimization, but the hidden if() and hidden assignments / side-effects in the macros were already asking to be cleaned up. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: cleanup tag macrosDan Williams2011-07-031-40/+7
| | | | | | | | | | | | | | A tag is a 16 bit number where the upper four bits is a sequence number and the remainder is the task context index (tci). Sanitize the macro names and shave 256-bytes out of scic_sds_controller by reducing the size of io_request_sequence. scic_sds_io_tag_construct --> ISCI_TAG scic_sds_io_tag_get_sequence --> ISCI_TAG_SEQ scic_sds_io_tag_get_index() --> ISCI_TAG_TCI scic_sds_io_sequence_increment() [delete / open code] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: cleanup/optimize pool implementationDan Williams2011-07-031-8/+4
| | | | | | | | | The circ_buf macros are ~6% faster, as measured by perf, because they take advantage of power-of-two math assumptions i.e. no test and branch for rollover. Their semantics are clearer than the hidden side effects in pool.h (like sci_pool_get() which hides an assignment). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: remove 'min memory' infrastructureDan Williams2011-07-031-13/+0
| | | | | | | | | | | | | The old 'core' had aspirations of running in severely memory constrained environments like bios option-rom, it's not needed for Linux and gets in the way of other cleanups (like unifying/reducing the number of structure members in scic_sds_controller/isci_host). This also fixes a theoretical bug in that the driver would blindly override the silicon advertised limits for number of ports, task contexts, and remote node contexts. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: Added support for C0 to SCU DriverAdam Gruchala2011-07-031-1/+7
| | | | | | | | | | | | C0 silicon updates the pci revision id and requires new AFE parameters for phy signal integrity. Support for previous silicon revisions is deprecated (it's also broken for the theoretical case of multiple controllers at different silicon revisions, all the more reason to get it removed as soon as possible) Signed-off-by: Adam Gruchala <adam.gruchala@intel.com> [fixed up deprecated silicon support] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: additional state machine cleanupEdmund Nadolski2011-07-031-1/+1
| | | | | | | | | | | | | | | | Additional state machine cleanups: o Remove static functions sci_state_machine_exit_state() and sci_state_machine_enter_state() o Combines sci_base_state_machine_construct() and sci_base_state_machine_start() into a single function, sci_init_sm() o Remove sci_base_state_machine_stop() which is unused. o Kill state_machine.[ch] Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> [fixed too large to inline functions] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: state machine cleanupEdmund Nadolski2011-07-031-14/+11
| | | | | | | | | | | | | | | | | | | | | | | This cleans up several areas of the state machine mechanism: o Rename sci_base_state_machine_change_state to sci_change_state o Remove sci_base_state_machine_get_state function o Rename 'state_machine' struct member to 'sm' in client structs o Shorten the name of request states o Shorten state machine state names as follows: SCI_BASE_CONTROLLER_STATE_xxx to SCIC_xxx SCI_BASE_PHY_STATE_xxx to SCI_PHY_xxx SCIC_SDS_PHY_STARTING_SUBSTATE_xxx to SCI_PHY_SUB_xxx SCI_BASE_PORT_STATE_xxx to SCI_PORT_xxx and SCIC_SDS_PORT_READY_SUBSTATE_xxx to SCI_PORT_SUB_xxx SCI_BASE_REMOTE_DEVICE_STATE_xxx to SCI_DEV_xxx SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_xxx to SCI_STP_DEV_xxx SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_xxx to SCI_SMP_DEV_xxx SCIC_SDS_REMOTE_NODE_CONTEXT_xxx_STATE to SCI_RNC_xxx Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: remove isci_timer interfaceEdmund Nadolski2011-07-031-1/+0
| | | | | | | Delete code which is no longer used. Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: convert phy_startup_timer to sci_timerEdmund Nadolski2011-07-031-6/+5
| | | | | Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: convert scic_timeout_timer to sci_timerEdmund Nadolski2011-07-031-3/+2
| | | | | Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: convert power control timer to sci_timerEdmund Nadolski2011-07-031-3/+2
| | | | | Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: convert port config agent timer to sci_timerEdmund Nadolski2011-07-031-10/+1
| | | | | | Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com> [squashed collateral cleanups] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: uplevel port infrastructureDan Williams2011-07-031-2/+27
| | | | | | | | * Move port configuration agent implementation * Merge core/scic_sds_port.[ch] into port.[ch] Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: uplevel state machineDan Williams2011-07-031-1/+1
| | | | | | | | unify core/sci_base_state.h and core/sci_base_state_machine.[ch] into state_machine.[ch] Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: uplevel register hardware data structures and unsolicited frame handlingDan Williams2011-07-031-2/+2
| | | | | Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: move core/controller to hostDan Williams2011-07-031-37/+575
| | | | | | | | Now that the data structures are unified unify the implementation in host.[ch] and cleanup namespace pollution. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify constantsDan Williams2011-07-031-16/+2
| | | | | | | | | | | cross driver constants are spread out over multiple header files, consolidate them into isci.h, and push some includes out to the source files that need them. TODO: remove SCI_MODE_SIZE infrastructure. TODO: task.h is full of inlines that are too large Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify request data structuresDan Williams2011-07-031-1/+0
| | | | | | | | | | Make scic_sds_request a proper member of isci_request. Also let's us get rid of the dma pool object size tracking since we now know that all requests are sizeof(isci_request). While cleaning up the construct routine incidentally replaced SCI_FIELD_OFFSET with offsetof. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify port data structuresDan Williams2011-07-031-6/+1
| | | | | | | | | Make scic_sds_port a member of isci_port and merge their lifetimes which means removing the port table from scic_sds_controller in favor of the one at the isci_host level. Merge ihost->sas_ports into ihost->ports. _ Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* isci: unify isci_host data structuresArtur Wojcik2011-07-031-2/+10
| | | | | | | | | Make it explicit that isci_host and scic_sds_controller are one in the same object. Signed-off-by: Artur Wojcik <artur.wojcik@intel.com> [removed ->ihost back pointer] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 07:33:01 +0100