summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/libsas (follow)
Commit message (Collapse)AuthorAgeFilesLines
* scsi: libsas: Align SMP request allocation to ARCH_DMA_MINALIGNYihang Li2024-04-021-1/+1
| | | | | | | | | | | | | | | | | | | This series [1] reduced the kmalloc() minimum alignment on arm64 to 8 bytes (from 128). In libsas, this will cause SMP requests to be 8-byte aligned through kmalloc() allocation. However, for hisi_sas hardware, all command addresses must be 16-byte-aligned. Otherwise, the commands fail to be executed. ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations, so use ARCH_DMA_MINALIGN as the alignment for SMP request. Link: https://lkml.kernel.org/r/20230612153201.554742-1-catalin.marinas@arm.com [1] Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20240328090626.621147-1-liyihang9@huawei.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: libsas: Fix disk not being scanned in after being removedXingui Yang2024-03-101-10/+22
| | | | | | | | | | | | | | | | | | | As of commit d8649fc1c5e4 ("scsi: libsas: Do discovery on empty PHY to update PHY info"), do discovery will send a new SMP_DISCOVER and update phy->phy_change_count. We found that if the disk is reconnected and phy change_count changes at this time, the disk scanning process will not be triggered. Therefore, call sas_set_ex_phy() to update the PHY info with the results of the last query. And because the previous phy info will be used when calling sas_unregister_devs_sas_addr(), sas_unregister_devs_sas_addr() should be called before sas_set_ex_phy(). Fixes: d8649fc1c5e4 ("scsi: libsas: Do discovery on empty PHY to update PHY info") Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240307141413.48049-3-yangxingui@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type()Xingui Yang2024-03-101-7/+12
| | | | | | | | | | Add a helper to get attached_sas_addr and device type from disc_resp. Suggested-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240307141413.48049-2-yangxingui@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: libsas: Declare sas_discover_end_dev() staticDamien Le Moal2023-09-141-1/+1
| | | | | | | | | | | sas_discover_end_dev() is defined and used only in sas_discover.c. Define this function as static. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230912230551.454357-4-dlemoal@kernel.org Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: libsas: Declare sas_set_phy_speed() staticDamien Le Moal2023-09-141-2/+2
| | | | | | | | | | | sas_set_phy_speed() is used only within sas_init.c. Declare this function as static. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230912230551.454357-3-dlemoal@kernel.org Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: libsas: Move local functions declarations to sas_internal.hDamien Le Moal2023-09-141-0/+12
| | | | | | | | | | | Move the declarations of functions used only within libsas from include/scsi/libsas.h to drivers/scsi/libsas/sas_internal.h Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230912230551.454357-2-dlemoal@kernel.org Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2023-09-091-38/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more SCSI updates from James Bottomley: "Mostly small stragglers that missed the initial merge. Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat due to the volatile qualifier removal, fnic due to unused function removal and sd.c has a lot of code shuffling to remove forward declarations)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits) scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD scsi: mpt3sas: Remove volatile qualifier scsi: mpt3sas: Perform additional retries if doorbell read returns 0 scsi: libsas: Simplify sas_queue_reset() and remove unused code scsi: ufs: Fix the build for the old ARM OABI scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt() scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag() scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport" scsi: fnic: Replace sgreset tag with max_tag_id scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs() scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error scsi: smartpqi: Change driver version to 2.1.24-046 scsi: smartpqi: Enhance error messages scsi: smartpqi: Enhance controller offline notification scsi: smartpqi: Enhance shutdown notification scsi: smartpqi: Simplify lun_number assignment scsi: smartpqi: Rename pciinfo to pci_info scsi: smartpqi: Rename MACRO to clarify purpose scsi: smartpqi: Add abort handler ...
| * scsi: libsas: Simplify sas_queue_reset() and remove unused codeWenchao Hao2023-08-311-38/+3
| | | | | | | | | | | | | | | | | | | | | | | | sas_queue_reset() is always called with param "wait" set to 0, so remove it from this function's parameter list. Also remove unused function sas_wait_eh(). Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Link: https://lore.kernel.org/r/20230729102451.2452826-1-haowenchao2@huawei.com Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | Merge tag 'ata-6.6-rc1' of ↵Linus Torvalds2023-09-052-8/+3
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata updates from Damien Le Moal: - Fix OF include file for ata platform drivers (Rob) - Simplify various ahci, sata and pata platform drivers using the function devm_platform_ioremap_resource() (Yangtao) - Cleanup libata time related argument types (e.g. timeouts values) (Sergey) - Cleanup libata code around error handling as all ata drivers now define a error_handler operation (Hannes and Niklas) - Remove functions intended for libsas that are in fact unused (Niklas) - Change the remove device callback of platform drivers to a null function (Uwe) - Simplify the pata_imx driver using devm_clk_get_enabled() (Li) - Remove old and uinused remnants of the ide code in arm, parisc, powerpc, sparc and m68k architectures and associated drivers (pata_buddha, pata_falcon and pata_gayle) (Geert) - Add missing MODULE_DESCRIPTION() in the sata_gemini and pata_ftide010 drivers (me) - Several fixes for the pata_ep93xx and pata_falcon drivers (Nikita, Michael) - Add Elkhart Lake AHCI controller support to the ahci driver (Werner) - Disable NCQ trim on Micron 1100 drives (Pawel) * tag 'ata-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (60 commits) ata: libata-core: Disable NCQ_TRIM on Micron 1100 drives ata: ahci: Add Elkhart Lake AHCI controller ata: pata_falcon: add data_swab option to byte-swap disk data ata: pata_falcon: fix IO base selection for Q40 ata: pata_ep93xx: use soc_device_match for UDMA modes ata: pata_ep93xx: fix error return code in probe ata: sata_gemini: Add missing MODULE_DESCRIPTION ata: pata_ftide010: Add missing MODULE_DESCRIPTION m68k: Remove <asm/ide.h> ata: pata_gayle: Remove #include <asm/ide.h> ata: pata_falcon: Remove #include <asm/ide.h> ata: pata_buddha: Remove #include <asm/ide.h> asm-generic: Remove ide_iops.h sparc: Remove <asm/ide.h> powerpc: Remove <asm/ide.h> parisc: Remove <asm/ide.h> ARM: Remove <asm/ide.h> ata: pata_imx: Use helper function devm_clk_get_enabled() ata: sata_rcar: Convert to platform remove callback returning void ata: sata_mv: Convert to platform remove callback returning void ...
| * ata,scsi: remove ata_sas_port_init()Niklas Cassel2023-08-021-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ata_sas_port_init() now only contains a single initialization. Move this single initialization to ata_sas_port_alloc(), since: 1) ata_sas_port_alloc() already initializes some of the struct members. 2) ata_sas_port_alloc() is only used by libsas. Suggested-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
| * ata,scsi: cleanup __ata_port_probe()Hannes Reinecke2023-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Rename __ata_port_probe() to ata_port_probe() and drop the wrapper ata_sas_async_probe(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
| * ata,scsi: remove ata_sas_port_destroy()Hannes Reinecke2023-08-022-2/+2
| | | | | | | | | | | | | | | | | | | | | | Is now a wrapper around kfree(), so call it directly. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
| * ata,scsi: remove ata_sas_port_{start,stop} callbacksHannes Reinecke2023-08-021-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Callbacks are empty now, so remove them. Also, remove the call to ap->ops->port_start() in ata_sas_port_init(), as this would otherwise cause a NULL pointer dereference, now when the callback is gone. Signed-off-by: Hannes Reinecke <hare@suse.de> [niklas: remove the call to ap->ops->port_start() in ata_sas_port_init()] Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
* | Merge patch series "libsas: Some tidy-up"Martin K. Petersen2023-08-258-37/+33
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | John Garry <john.g.garry@oracle.com> says: This series tidies-up libsas a bit, including: - delete structure(s) with only one member - delete structure members which are only ever set - delete structure members which are never set and code which relies on that member being set This conflicts with the following series: https://lore.kernel.org/linux-scsi/20230809132249.37948-1-yuehaibing@huawei.com/ Any conflict should be trivial to resolve. Based on mkp-scsi staging at a18e81d17a7e ("scsi: ufs: ufs-pci: Add support for QEMU") Link: https://lore.kernel.org/r/20230815115156.343535-1-john.g.garry@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | scsi: libsas: Delete sas_ssp_task.retry_countJohn Garry2023-08-212-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since libsas was introduced in commit 2908d778ab3e ("[SCSI] aic94xx: new driver"), sas_ssp_task.retry_count is only ever set, so delete it. The aic94xx driver also had its own retry_count definition in struct scb sub-structs, which may have caused a mix-up. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230815115156.343535-6-john.g.garry@oracle.com Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | scsi: libsas: Delete struct scsi_coreJohn Garry2023-08-218-33/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 79855d178557 ("libsas: remove task_collector mode"), struct scsi_core only contains a reference to the shost. struct scsi_core is only used in sas_ha_struct.core, so delete scsi_core and replace with a reference to the shost there. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230815115156.343535-5-john.g.garry@oracle.com Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | scsi: libsas: Delete enum sas_classJohn Garry2023-08-212-3/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | enum sas_class prob would have been useful if function sas_show_class() was ever implemented, which it wasn't. enum sas_class is used as asd_sas_port.class and asd_sas_phy.class, which are only ever set, so delete these members and the enum. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230815115156.343535-3-john.g.garry@oracle.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | Merge patch series "Returning FIS on success for CDL"Martin K. Petersen2023-08-251-0/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Igor Pylypiv <ipylypiv@google.com> says: This patch series plumbs libata's request for a result taskfile (ATA_QCFLAG_RESULT_TF) through libsas to pm80xx LLDD. Other libsas LLDDs can start using the newly added return_fis_on_success as well, if needed. For Command Duration Limits policy 0xD (command completes without an error) libata needs FIS in order to detect the ATA_SENSE bit and read the Sense Data for Successful NCQ Commands log (0Fh). pm80xx HBAs do not return FIS on success by default, hence, the driver is updated to set the RETFIS bit (Return FIS on good completion) when requested by libsas. Link: https://lore.kernel.org/r/20230819213040.1101044-1-ipylypiv@google.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | scsi: libsas: Add return_fis_on_success to sas_ata_taskIgor Pylypiv2023-08-211-0/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | Set return_fis_on_success when libata requests result taskfile. For Command Duration Limits policy 0xD (command completes without an error) libata needs FIS in order to detect the ATA_SENSE bit and read the Sense Data for Successful NCQ Commands log (0Fh). Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Link: https://lore.kernel.org/r/20230819213040.1101044-2-ipylypiv@google.com Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* / scsi: libsas: Remove unused declarationsYue Haibing2023-08-211-7/+0
|/ | | | | | | | | | | | | Commit 042ebd293b86 ("scsi: libsas: kill useless ha_event and do some cleanup") removed sas_hae_reset() but not its declaration. Commit 2908d778ab3e ("[SCSI] aic94xx: new driver") declared but never implemented other functions. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20230809132249.37948-1-yuehaibing@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2023-06-301-53/+71
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi, lpfc, qla2xxx). We have a couple of major core changes impacting other systems: - Command Duration Limits, which spills into block and ATA - block level Persistent Reservation Operations, which touches block, nvme, target and dm Both of these are added with merge commits containing a cover letter explaining what's going on" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits) scsi: core: Improve warning message in scsi_device_block() scsi: core: Replace scsi_target_block() with scsi_block_targets() scsi: core: Don't wait for quiesce in scsi_device_block() scsi: core: Don't wait for quiesce in scsi_stop_queue() scsi: core: Merge scsi_internal_device_block() and device_block() scsi: sg: Increase number of devices scsi: bsg: Increase number of devices scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue scsi: ufs: ufs-pci: Add support for Intel Arrow Lake scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT scsi: ufs: wb: Add explicit flush_threshold sysfs attribute scsi: ufs: ufs-qcom: Switch to the new ICE API scsi: ufs: dt-bindings: qcom: Add ICE phandle scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR scsi: ufs: core: Remove dedicated hwq for dev command scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes ...
| * scsi: libsas: factor out sas_check_fanout_expander_topo()Jason Yan2023-05-081-10/+18
| | | | | | | | | | | | | | | | | | | | | | To be consistent with sas_check_edge_expander_topo(), factor out sas_check_fanout_expander_topo(). And remove the comment since we are not spilling over 80 colums now. Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20230421093744.1583609-4-yanaijie@huawei.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Remove an empty branch in sas_check_parent_topology()Jason Yan2023-05-081-23/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | There is an empty "all good" branch in sas_check_parent_topology(). We can reverse the test statement and remove the empty branch. Moreover, factor out a helper sas_check_edge_expander_topo() to make the code more readable. Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20230421093744.1583609-3-yanaijie@huawei.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Simplify sas_check_eeds()Jason Yan2023-05-081-20/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | In sas_check_eeds() there is an empty branch. We can reverse the test expression and then remove the empty branch. Also the test expression is a little bit complex so it deserves an individual function. And make the continuing prototype lines indented after the opening parenthesis to follow the standard coding style. Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20230421093744.1583609-2-yanaijie@huawei.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | ata: libata-sata: Simplify ata_change_queue_depth()Damien Le Moal2023-06-051-2/+1
|/ | | | | | | | | | | | | | | | | | | | | Commit 141f3d6256e5 ("ata: libata-sata: Fix device queue depth control") added a struct ata_device argument to ata_change_queue_depth() to address problems with changing the queue depth of ATA devices managed through libsas. This was due to problems with ata_scsi_find_dev() which are now fixed with commit 7f875850f20a ("ata: libata-scsi: Use correct device no in ata_find_dev()"). Undo some of the changes of commit 141f3d6256e5: remove the added struct ata_device aregument and use again ata_scsi_find_dev() to find the target ATA device structure. While doing this, also make sure that ata_scsi_find_dev() is called with ap->lock held, as it should. libsas and libata call sites of ata_change_queue_depth() are updated to match the modified function arguments. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com>
* scsi: libsas: Abort all in-flight requests when device is goneJason Yan2023-04-031-0/+29
| | | | | | | | | | | | | | | | | | | | | When a disk is removed with in-flight I/O, the application needs to wait for 30 seconds (depending on the timeout configuration) to hear back from the kernel. Xingui tried to fix this issue by aborting the ATA link for SATA devices[1], however this approach left the SAS devices unresolved. Try to fix this issue by aborting all in-flight requests when the device is gone. This is implemented by iterating over the tagset. [1] https://lore.kernel.org/lkml/234e04db-7539-07e4-a6b8-c6b05f78193d@opensource.wdc.com/T/ Cc: Xingui Yang <yangxingui@huawei.com> Cc: John Garry <john.g.garry@oracle.com> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20230330110930.175539-1-yanaijie@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2023-02-223-105/+114
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas). The major core change is a rework to remove the two helpers around scsi_execute_cmd and use it as the only submission interface along with other minor fixes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits) scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param() scsi: ufs: core: Fix device management cmd timeout flow scsi: aic94xx: Add missing check for dma_map_single() scsi: smartpqi: Replace one-element array with flexible-array member scsi: mpt3sas: Fix a memory leak scsi: qla2xxx: Remove the unused variable wwn scsi: ufs: core: Fix kernel-doc syntax scsi: ufs: core: Add hibernation callbacks scsi: snic: Fix memory leak with using debugfs_lookup() scsi: ufs: core: Limit DMA alignment check scsi: Documentation: Correct spelling scsi: Documentation: Correct spelling scsi: target: Documentation: Correct spelling scsi: aacraid: Allocate cmd_priv with scsicmd scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5 scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference scsi: ufs: core: Enable DMA clustering scsi: ufs: exynos: Fix the maximum segment size scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096 ...
| * scsi: libsas: Fix an error code in sas_ata_add_dev()Dan Carpenter2023-01-121-1/+1
| | | | | | | | | | | | | | | | | | | | This code accidentally returns success instead of -ENOMEM. Fixes: 7cc7646b4b24 ("scsi: libsas: Factor out sas_ata_add_dev()") Link: https://lore.kernel.org/r/Y7asLxzVwQ56G+ya@kili Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * Merge patch series "scsi: libsas: Some coding style fixes and cleanups"Martin K. Petersen2022-12-303-105/+114
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | Jason Yan <yanaijie@huawei.com> says: A few coding style fixes and cleanups. There should be no functional changes in this series besides the debug log prints. Link: https://lore.kernel.org/r/20221214133808.1649122-1-yanaijie@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| | * scsi: libsas: Factor out sas_ex_add_dev()Jason Yan2022-12-301-29/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Factor out sas_ex_add_dev() to be consistent with sas_ata_add_dev() and unify the error handling. Cc: John Garry <john.g.garry@oracle.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| | * scsi: libsas: Factor out sas_ata_add_dev()Jason Yan2022-12-302-52/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Factor out sas_ata_add_dev() and put it in sas_ata.c since it is a SATA related interface. Also follow the standard coding style to define an inline empty function when CONFIG_SCSI_SAS_ATA is not enabled. Cc: John Garry <john.g.garry@oracle.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| | * scsi: libsas: Remove useless dev_list delete in sas_ex_discover_end_dev()Jason Yan2022-12-301-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The domain device 'child' is allocated in sas_ex_discover_end_dev() and used to be added to the dev_list in this function. After the following two fixes the device is added to the disco_list instead. As a result, the list_del() and locking left behind is now redundant. Fixes: 87c8331fcf72 ("[SCSI] libsas: prevent domain rediscovery competing with ata error handling") Fixes: 92625f9bff38 ("[SCSI] libsas: restore scan order") Cc: John Garry <john.g.garry@oracle.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| | * scsi: libsas: Change the coding style of sas_discover_sata()Jason Yan2022-12-301-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The coding style where calling this interface is inconsistent with other interfaces for SATA devices. The standard style for other SATA interfaces is like: #ifdefine CONFIG_SCSI_SAS_ATA void sas_ata_task_abort(struct sas_task *task); #else static inline void sas_ata_task_abort(struct sas_task *task) { } #endif And the callers does not have to do things like "#ifdefine CONFIG_SCSI_SAS_ATA" and may call the interface directly. So follow the standard style here. Cc: John Garry <john.g.garry@oracle.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| | * scsi: libsas: Move sas_get_ata_command_set() up to save the declarationJason Yan2022-12-301-15/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a sas_get_ata_command_set() declaration above sas_get_ata_info() to make it compile. However, this function is defined in the same file. Move it up to save the forward declaration. Also remove the variable 'fis' which is not needed in this function. Cc: John Garry <john.g.garry@oracle.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | | Merge tag 'ata-6.3-rc1' of ↵Linus Torvalds2023-02-221-6/+5
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA updates from Damien Le Moal: - Small cleanup of the pata_octeon driver to drop a useless platform callback (Uwe) - Simplify ata_scsi_cmd_error_handler() code using the fact that ap->ops->error_handler is NULL most of the time (Wenchao) - Several patches improving libata error handling. This is in preparation for supporting the command duration limits (CDL) feature. The changes allow handling corner cases of ATA NCQ errors which do not happen with regular drives but will be triggered with CDL drives (Niklas) - Simplify the qc_fill_rtf operation (me) - Improve SCSI command translation for REPORT_SUPPORTED_OPERATION_CODES command (me) - Cleanup of libata FUA handling. This falls short of enabling FUA for ATA drives that support it by default as there were concerns that old drives would break. The series however fixes several issues with the FUA support to ensure that FUA is reported as being supported only for drives that can handle all possible write cases (NCQ and non-NCQ). A check in the block layer is also added to ensure that we never see read FUA commands (current behavior) (me) - Several patches to move the old PARIDE (parallel port IDE) driver to libata as pata_parport. Given that this driver also needs protocol modules, the driver code resides in its own pata_parport directoy under drivers/ata (Ondrej) * tag 'ata-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_parport: Fix ida_alloc return value error check drivers/block: Move PARIDE protocol modules to drivers/ata/pata_parport drivers/block: Remove PARIDE core and high-level protocols ata: pata_parport: add driver (PARIDE replacement) ata: libata: exclude FUA support for known buggy drives ata: libata: Fix FUA handling in ata_build_rw_tf() ata: libata: cleanup fua support detection ata: libata: Rename and cleanup ata_rwcmd_protocol() ata: libata: Introduce ata_ncq_supported() block: add a sanity check for non-write flush/fua bios ata: libata-scsi: improve ata_scsiop_maint_in() ata: libata-scsi: do not overwrite SCSI ML and status bytes ata: libata: move NCQ related ATA_DFLAGs ata: libata: respect successfully completed commands during errors ata: libata: read the shared status for successful NCQ commands once ata: libata: simplify qc_fill_rtf port operation interface ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EH ata: libata-eh: Cleanup ata_scsi_cmd_error_handler() ata: octeon: Drop empty platform remove function
| * | | ata: libata: simplify qc_fill_rtf port operation interfaceDamien Le Moal2023-01-041-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The boolean return value of the qc_fill_rtf operation is used nowhere. Simplify this operation interface by making it a void function. All drivers defining this operation are also updated. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com>
| * | | ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EHNiklas Cassel2023-01-041-4/+4
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The name ATA_QCFLAG_FAILED is misleading since it does not mean that a QC completed in error, or that it didn't complete at all. It means that libata decided to schedule EH for the QC, so the QC is now owned by the libata error handler (EH). The normal execution path is responsible for not accessing a QC owned by EH. libata core enforces the rule by returning NULL from ata_qc_from_tag() for QCs owned by EH. It is quite easy to mistake that a QC marked with ATA_QCFLAG_FAILED was an error. However, a QC that was actually an error is instead indicated by having qc->err_mask set. E.g. when we have a NCQ error, we abort all QCs, which currently will mark all QCs as ATA_QCFLAG_FAILED. However, it will only be a single QC that is an error (i.e. has qc->err_mask set). Rename ATA_QCFLAG_FAILED to ATA_QCFLAG_EH to more clearly highlight that this flag simply means that a QC is now owned by EH. This new name will not mislead to think that the QC was an error (which is instead indicated by having qc->err_mask set). This also makes it more obvious that the EH code skips all QCs that do not have ATA_QCFLAG_EH set (rather than ATA_QCFLAG_FAILED), since the EH code should simply only care about QCs that are owned by EH itself. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
* / / scsi: libsas: Grab the ATA port lock in sas_ata_device_link_abort()Xingui Yang2023-01-071-0/+3
|/ / | | | | | | | | | | | | | | | | | | | | Grab the ATA port lock in sas_ata_device_link_abort() before calling ata_link_abort() as outlined in this function's locking requirements. Fixes: 44112922674b ("scsi: libsas: Add sas_ata_device_link_abort()") Signed-off-by: Xingui Yang <yangxingui@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2022-12-144-25/+92
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "Updates to the usual drivers (target, ufs, smartpqi, lpfc). There are some core changes, mostly around reworking some of our user context assumptions in device put and moving some code around. The remaining updates are bug fixes and minor changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits) scsi: sg: Fix get_user() in call sg_scsi_ioctl() scsi: megaraid_sas: Fix some spelling mistakes in comment scsi: core: Use SCSI_SCAN_INITIAL in do_scsi_scan_host() scsi: core: Use SCSI_SCAN_RESCAN in __scsi_add_device() scsi: ufs: ufs-mediatek: Remove unnecessary return code scsi: ufs: core: Fix the polling implementation scsi: libsas: Do not export sas_ata_wait_after_reset() scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset scsi: libsas: Add smp_ata_check_ready_type() scsi: Revert "scsi: hisi_sas: Don't send bcast events from HW during nexus HA reset" scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()" scsi: ufs: ufs-mediatek: Modify the return value scsi: ufs: ufs-mediatek: Remove unneeded code scsi: device_handler: alua: Call scsi_device_put() from non-atomic context scsi: device_handler: alua: Revert "Move a scsi_device_put() call out of alua_check_vpd()" scsi: snic: Fix possible UAF in snic_tgt_create() scsi: qla2xxx: Initialize vha->unknown_atio_[list, work] for NPIV hosts scsi: qla2xxx: Remove duplicate of vha->iocb_work initialization scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices ...
| * scsi: libsas: Do not export sas_ata_wait_after_reset()Jie Zhan2022-11-261-2/+1
| | | | | | | | | | | | | | | | | | | | sas_ata_wait_after_reset() does not need to be exported since it is no longer referenced outside libsas. Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com> Link: https://lore.kernel.org/r/20221118083714.4034612-6-zhanjie9@hisilicon.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Add smp_ata_check_ready_type()Jie Zhan2022-11-263-2/+29
| | | | | | | | | | | | | | | | | | Create function smp_ata_check_ready_type() for LLDDs to wait for SATA devices to come up after a link reset. Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com> Link: https://lore.kernel.org/r/20221118083714.4034612-4-zhanjie9@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Use sas_phy_match_port_addr() instead of open coding itJason Yan2022-10-181-2/+1
| | | | | | | | | | | | | | | | | | | | | | The SAS address comparison of asd_sas_port and expander phy is open coded. Replace it with sas_phy_match_port_addr(). Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20220928070130.3657183-9-yanaijie@huawei.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Use sas_phy_addr_match() instead of open coding itJason Yan2022-10-181-2/+1
| | | | | | | | | | | | | | | | | | | | | | The SAS address comparison of expander phys is open coded. Replace it with sas_phy_addr_match(). Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20220928070130.3657183-8-yanaijie@huawei.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Use sas_phy_match_dev_addr() instead of open coding itJason Yan2022-10-181-12/+6
| | | | | | | | | | | | | | | | | | | | | | The SAS address comparison of domain device and expander phy is open coded. Replace it with sas_phy_match_dev_addr(). Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20220928070130.3657183-7-yanaijie@huawei.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Introduce sas_find_attached_phy_id() helperJason Yan2022-10-181-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | LLDDs are all implementing their own attached phy ID finding code. Factor it out to libsas. Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20220928070130.3657183-3-yanaijie@huawei.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Introduce SAS address comparison helpersJason Yan2022-10-181-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | SAS address comparison is widely used in libsas. However they are all opencoded and to avoid the line spill over 80 columns, are mostly split into multi-lines. Introduce some helpers to prepare for some refactoring. Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20220928070130.3657183-2-yanaijie@huawei.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Update SATA dev FIS in sas_ata_task_done()John Garry2022-10-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | In sas_ata_task_done(), for commands which complete with error we set the SATA dev FIS status field with ATA_ERR. In ata_eh_analyze_tf() this would be interpreted as a HSM error. Set ATA_DRDY, which will lead libata to judge as a device error, which is a safer bet. Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1665998435-199946-9-git-send-email-john.garry@huawei.com Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Make sas_{alloc, alloc_slow, free}_task() privateJohn Garry2022-10-182-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | We have no users outside libsas any longer, so make sas_alloc_task(), sas_alloc_slow_task(), and sas_free_task() private. Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1665998435-199946-8-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Add sas_ata_device_link_abort()John Garry2022-10-181-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to how AHCI handles NCQ errors in ahci_error_intr() -> ata_port_abort() -> ata_do_link_abort(), add an NCQ error handler for LLDDs to call to initiate a link abort. This will mark all outstanding QCs as failed and kick-off EH. Note: A "force reset" argument is added for drivers which require the ATA error handling to always reset the device. A driver may require this feature for when SATA device per-SCSI cmnd resources are only released during reset for ATA EH. As such, we need an option to force reset to be done, regardless of what any EH autopsy decides. The SATA device FIS fields are set to indicate a device error from ata_eh_analyze_tf(). Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Suggested-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1665998435-199946-2-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | scsi: libsas: make use of ata_port_is_frozen() helperNiklas Cassel2022-10-191-1/+1
|/ | | | | | | | | | Clean up the code by making use of the newly introduced ata_port_is_frozen() helper function. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 09:41:44 +0100