summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_hw.h (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Add Fabric assigned WWN support.James Smart2017-04-241-0/+3
| | | | | | | | | | | | | | | | Adding support for Fabric assigned WWPN and WWNN. Firmware sends first FLOGI to fabric with vendor version changes. On link up driver gets updated service parameter with FAWWN assigned port name. Driver sends 2nd FLOGI with updated fawwpn and modifies the vport->fc_portname in driver. Note: Soft wwpn will not be allowed when fawwpn is enabled. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
* scsi: lpfc: Update copyrightsJames Smart2017-02-231-1/+3
| | | | | | | | | | Update copyrights to 2017 for all files touched in this patch set Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: NVME Target: Merge into FC discoveryJames Smart2017-02-231-1/+9
| | | | | | | | | | | NVME Target: Merge into FC discovery Adds NVME PRLI handling and Nameserver registrations for NVME Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: NVME Initiator: Merge into FC discoveryJames Smart2017-02-231-21/+48
| | | | | | | | | | | NVME Initiator: Merge into FC discovery Adds NVME PRLI support and Nameserver registrations and Queries for NVME Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: NVME Initiator: Base modificationsJames Smart2017-02-231-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NVME Initiator: Base modifications This patch adds base modifications for NVME initiator support. The base modifications consist of: - Formal split of SLI3 rings from SLI-4 WQs (sometimes referred to as rings as well) as implementation now widely varies between the two. - Addition of configuration modes: SCSI initiator only; NVME initiator only; NVME target only; and SCSI and NVME initiator. The configuration mode drives overall adapter configuration, offloads enabled, and resource splits. NVME support is only available on SLI-4 devices and newer fw. - Implements the following based on configuration mode: - Exchange resources are split by protocol; Obviously, if only 1 mode, then no split occurs. Default is 50/50. module attribute allows tuning. - Pools and config parameters are separated per-protocol - Each protocol has it's own set of queues, but share interrupt vectors. SCSI: SLI3 devices have few queues and the original style of queue allocation remains. SLI4 devices piggy back on an "io-channel" concept that eventually needs to merge with scsi-mq/blk-mq support (it is underway). For now, the paradigm continues as it existed prior. io channel allocates N msix and N WQs (N=4 default) and either round robins or uses cpu # modulo N for scheduling. A bunch of module parameters allow the configuration to be tuned. NVME (initiator): Allocates an msix per cpu (or whatever pci_alloc_irq_vectors gets) Allocates a WQ per cpu, and maps the WQs to msix on a WQ # modulo msix vector count basis. Module parameters exist to cap/control the config if desired. - Each protocol has its own buffer and dma pools. I apologize for the size of the patch. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> ---- Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: lpfc: Clear the VendorVersion in the PLOGI/PLOGI ACC payloadJames Smart2017-01-051-0/+6
| | | | | | | | | | | | Clear the VendorVersion in the PLOGI/PLOGI ACC payload Vendor version info may have been set on fabric login. Before sending PLOGI payloads, ensure that it's cleared. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* lpfc: Correct RDP response Revision locationJames Smart2016-07-151-1/+1
| | | | | | | | | Correct RDP response Revision location Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* lpfc: Correct Buffer credit descriptor values in RDP responseJames Smart2016-07-151-1/+1
| | | | | | | | | Correct Buffer credit descriptor values in RDP response Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* lpfc: Correct RDP response sizing issueJames Smart2016-07-151-18/+8
| | | | | | | | | Correct RDP response sizing issue Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* lpfc: Fix Transgression Flag of Optical Element descriptor for RDP on LinuxJames Smart2016-07-151-0/+6
| | | | | | | | | Fix Transgression Flag of Optical Element descriptor for RDP on Linux Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* lpfc: Update modified file copyrightsJames Smart2016-04-111-1/+1
| | | | | | Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* lpfc: Add support for SmartSAN 2.0James Smart2016-04-111-5/+68
| | | | | | | | | | | | | | Revise versions to reflect SmartSAN 2.0 support RDP updated to support additional descriptors: Credit descriptor Optical Element Data descriptors for Temperature, Voltage, Bias current, TX power and TX power. Optical Product Data descriptor. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* lpfc: Modularize and cleanup FDMI code in driverJames Smart2015-12-221-33/+151
| | | | | | | | | | | | Modularize, cleanup, add comments - for FDMI code in driver Note: I don't like the comments with leading # - but as we have a lot if present, I'm deferring to handle it in one big fix later. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* lpfc: Fix default RA_TOV and ED_TOV in the FC/FCoE driver for all topologiesJames Smart2015-10-271-1/+1
| | | | | | | | | | Initial link up defaults were not properly being tracked relative to initial FLOGI or pt2pt PLOGI. Add code to initialize them. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* lpfc: Add support for Lancer G6 and 32G FC linksJames Smart2015-10-271-0/+4
| | | | | | | Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* lpfc: Add support for RDP ELS command.James Smart2015-06-061-0/+169
| | | | | | | Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* lpfc: Add support for ELS LCB.James Smart2015-06-061-0/+32
| | | | | | | | | Also has a little whitespace fixing. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* lpfc: Update copyright to 2015James Smart2015-04-101-1/+1
| | | | | | | | | Update copyright to 2015 Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* lpfc: Fix FDMI Fabric support in driver for BrocadeJames Smart2015-04-101-109/+97
| | | | | | | Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* lpfc: Update Copyright on changed files from 8.3.45 patchesJames Smart2014-06-021-1/+1
| | | | | | | | | | Update Copyright on changed files from 8.3.45 patches Missed this in the 8.3.45 push Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* [SCSI] lpfc 8.3.45: Incorporated support of a low-latency io pathJames Smart2014-03-151-0/+1
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.40: Update Copyrights to 2013 for 8.3.38, 8.3.39, and 8.3.40 ↵James Smart2013-06-261-1/+1
| | | | | | | modifications Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.39: Fixed BlockGuard to take advantage of ↵James Smart2013-05-021-0/+1
| | | | | | | rdprotect/wrprotect info when available Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.37: Fixed ELS_REC received on the unsolicited receive queueJames Smart2013-01-301-0/+2
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.34: Fix parameter field in CQE to mask for LOCAL_REJECT statusJames Smart2012-09-141-0/+1
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.33: Fixed incomplete list of SLI4 commands with extended ↵James Smart2012-09-141-0/+1
| | | | | | | timeout value Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.33: Parallelize SLI-4 Q distributionJames Smart2012-09-141-7/+7
| | | | | | | | Commonize SLI-3/4 Ring/Queue framework, to keep SLI-3 compatibility Parallelize SLI-4 Q distribution - to use multiple posting/completion queues Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.33: Enable attachment to OCe14000 adaptersJames Smart2012-09-141-0/+2
| | | | | Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.31: Correct point-to-point mode discovery errors on LPe16xxxJames Smart2012-05-171-0/+3
| | | | | | Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.29: SLI related fixesJames Smart2012-02-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | SLI related fixes: - Fix REG_RPI fails on SLI4 HBA putting NPort into NPR state (126230) - Fix ELS FDISC failing with local reject / invalid RPI. (126350) - Fix reset port when reset is needed during fw_dump (125807) - Fix unbounded firmware revision string from port cause panic (126560) - Fix driver behavior when receiving an ADISC (126654) - Fix driver not returning when bad ndlp found in abts error event handling (126209) - Add more driver logs in area of SLI4 port error attention and reset recovery (126813, 124466) - Fix failure in handling large CQ/EQ identifiers in an IOV environment (126856) - Fix for driver using duplicate RPIs after lancer port reset (126723) - Clear vport->fc_myDID in lpfc_els_issue_fdisc to guarentee a zero SID (126779, 126897) - Fix for SLI4 Port delivery for BLS ABORT ACC (126289) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.29: BSG and User interface fixesJames Smart2012-02-191-1/+3
| | | | | | | | | | | | | BSG and User interface fixes: - Fix driver processing an els command using 16Gb FC Adapter (126345) - Change SLI4 FC port internal loopback to inner internal (126409) - Fix bug with driver dump command type 4 using 16Gb FC Adapter (126406) - Create character device to take a reference on the driver (126082) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.28: Add Loopback support for SLI4 adaptersJames Smart2011-12-151-1/+1
| | | | | | | | | | | | | - Add Basic support for SLI4 Loopback. (CR 124951, 125766, 124951, 125843, 125832, 125843) - Added missing protection in setting/clearing of phba->link_flag bit field (CR 125994) - Use link type and link number obtained from READ_CONFIG mailbox command. (CR 126264) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] Lpfc 8.3.28: FC and SCSI Discovery FixesJames Smart2011-12-151-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | FC and SCSI Discovery Fixes: - Clear the virtual fabrics bit (word 1 bit 30) when sending the FLOGI and FDISC. (CR 124339) - Return a MLQUEUE_DEVICE_BUSY if the driver detects that an I/O is being retried too quickly (CR 124668) - Remove NDLP reference put in lpfc_cmpl_els_logo_acc for all but fabric nodes (CR 123924) - Only retry FDISCs every second and stop retrying after devloss number of retries (CR 13939) - Check to see if vports are unloading before adding them to the vport work array. (CR 124996) - Fixed illegal state transition during driver unload (CR 124191) - Added missing protection on setting/clearing of vport->fc_flag bit (CR 126002) - Set NPIV flag in lpfc_mbx_process_link_up for all ports sli3 and above. (CR 126094) - Clear FCP command bytes that are not used. (CR 126209) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.28: Add support for ABTS failure handlingJames Smart2011-12-151-4/+9
| | | | | | | | | | | | | Add support for ABTS failure handling: - Add asynchronous ABTS notification event feature to driver (CR 124578) - Change driver message 3092 and 3116 to KERN_WARNING (CR 124768) - Alter the SCR ELS command to use the temporary RPI and the Destination DID for SLI4-FC (CR 126070) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] lpfc 8.3.25: Adapter Interface fixes and changesJames Smart2011-07-271-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | Adapter Interface fixes and changes - Modify the macro field from lpfc_init_vpi_vpi to lpfc_init_vfi_vpi - Add the new CQE_CODE_RECEIVE_V1 CQE Code, add code in the driver to handle the new Code the same as the CQE_CODE_RECEIVE code except that there are two new checks for this code that will cause the driver to use the new V1 macros for rq_id and fcf_id. - Fix a bug in lpfc_prep_seq() where the size out of the first CQE was ONLY being used, even though multiple dmabufs make up the sequence, each have their own CQE with potentially different sizes. - Fix bug in lpfc_bsg_ct_unsol_event() where the ulpContext and ulpWord[3] fields of the XMIT_SEQUENCE64_CX IOCB were being calculated incorrectly. - Do physical to logical translation before indexing into the active XRI array. - Populate physical vpi in the iocb data structure. - Put the current accumulated total in each IOCB in the chain as we are walking thru then. The last IOCB in the chain should have the total length of the sequence. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* treewide: fix potentially dangerous trailing ';' in #defined values/expressionsPhil Carmody2011-07-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | All these are instances of #define NAME value; or #define NAME(params_opt) value; These of course fail to build when used in contexts like if(foo $OP NAME) while(bar $OP NAME) and may silently generate the wrong code in contexts such as foo = NAME + 1; /* foo = value; + 1; */ bar = NAME - 1; /* bar = value; - 1; */ baz = NAME & quux; /* baz = value; & quux; */ Reported on comp.lang.c, Message-ID: <ab0d55fe-25e5-482b-811e-c475aa6065c3@c29g2000yqd.googlegroups.com> Initial analysis of the dangers provided by Keith Thompson in that thread. There are many more instances of more complicated macros having unnecessary trailing semicolons, but this pile seems to be all of the cases of simple values suffering from the problem. (Thus things that are likely to be found in one of the contexts above, more complicated ones aren't.) Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* [SCSI] lpfc 8.3.24: Add resource extent supportJames Smart2011-05-271-0/+2
| | | | | | | | | | This patch adds support for hardware that returns resource ids via extents rather than contiguous ranges. [jejb: checkpatch.pl fixes] Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] lpfc 8.3.24: Add SR-IOV controlJames Smart2011-05-271-0/+2
| | | | | | Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] lpfc 8.3.24: Extended hardware support and support dump imagesJames Smart2011-05-271-1/+3
| | | | | | | | | | | | Extended hardware support and support dump images: - Make the size to be MAILBOX_SYSFS_MAX (4096) so that it allows the maximum sysfs binary access interface possible. - Add ids and model names for new hardware - Add capability of inducing SLI4 firmware dump obj file Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* treewide: fix a few typos in commentsJustin P. Mattock2011-05-101-1/+1
| | | | | | | | | | - kenrel -> kernel - whetehr -> whether - ttt -> tt - sss -> ss Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* [SCSI] lpfc 8.3.22: FC Discovery fixesJames Smart2011-03-231-1/+1
| | | | | | | | | | | | | FC Discovery fixes - In lpfc_sli4_bpl2sgl byte swapping the SGL in word2. - In lpfc_sli4_iocb2wqe byteswap the data for CMD_GEN_REQUEST64_CR type WQE. - In lpfc_sli4_seq_abort_acc do not set the oxid into the iocb's xritag field. - In lpfc_sli4_seq_abort_acc check the return value of lpfc_sli_issue_iocb. - Inprove messages in this area. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.22: Add support for PCI Adapter FailureJames Smart2011-03-231-1/+1
| | | | | | | | | | Periodically poll adapter registers to detect pci adapter failure (reads return -1). On failure, take port offline, set error indicators and wake up worker threads. Threads will take adapter offline. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.22: T10-DIF correctionsJames Smart2011-03-231-0/+11
| | | | | | | | | | T10-DIF corrections - Add selective reset jump table entry - Split T10-DIF BDEs that cross 4K boundary Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.21: Initialization and user interface changesJames Smart2011-02-181-1/+4
| | | | | | | | | | | | - Make link speed not supported by port message an error message. - Add support for new SLI failure codes add sysfs parameter to reflect the security setting and current state. - Add all lpfc module parameters to the /sys/modules/lpfc/parameters directory. [jejb: fix up compile failure] Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.21: FC Discovery changesJames Smart2011-02-181-0/+6
| | | | | | | | | | | | | | FC Discovery changes - Treat received PLOGI while logged in as a relogin (unregister and reregister). - Added a timer to delay Nport discovery when clean bit is cleared and Fabric portname/nodename/FCID is changed. - Invalidate Port's DID when receiving PLOGI from p2p port with CONFIG_PORT mailbox command. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.19: Added support for ELS RRQ commandJames Smart2010-12-211-0/+18
| | | | | | | | | | | | | | | Added support for ELS RRQ command - Add new routine lpfc_set_rrq_active() to track XRI qualifier state. - Add new module parameter lpfc_enable_rrq to control RRQ operation. - Add logic to ELS RRQ completion handler and xri qualifier timeout to clear XRI qualifier state. - Use OX_ID from XRI_ABORTED_CQE for RRQ payload. - Tie abort and XRI_ABORTED_CQE andler to RRQ generation. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.19: Add SLI4 FC Discovery supportJames Smart2010-12-211-102/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SLI4 FC Discovery support - Replace READ_LA and READ_LA64 with READ_TOPOLOGY mailbox command. - Converted the old READ_LA structure to use bf_set/get instead of bit fields. - Rename HBA_FCOE_SUPPORT flag to HBA_FCOE_MODE. Flag now indicates function is running as SLI-4 FC or FCoE port. Make sure flag reset each time READ_REV completed as it can dynamically change. - Removed BDE union in the READ_TOPOLOGY mailbox command and added a define to define the ALPA MAP SIZE. Added FC Code for async events. - Added code to support new 16G link speed. - Define new set of values to keep track of valid user settable link speeds. - Used new link speed definitions to define link speed max and bitmap. - Redefined FDMI Port sppeds to be hax values and added the 16G value. - Added new CQE trailer code for FC Events. - Add lpfc_issue_init_vfi and lpfc_init_vfi_cmpl routines. - Replace many calls to the initial_flogi routine with lpfc_issue_init_vfi. - Add vp and vpi fields to the INIT_VFI mailbox command. - Addapt lpfc_hba_init_link routine for SLI4 use. - Use lpfc_hba_init_link call from lpfc_sli4_hba_setup. - Add a check for FC mode to register the FCFI before init link. - Convert lpfc_sli4_init_vpi to be called without a vpi (get it from vport). Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.19: Add latest SLI4 Hardware initialization supportJames Smart2010-12-211-2/+4
| | | | | | | | | | - Add the Lancer FC and FCoE PCI IDs - Add new SLI4 INTF register definitions - Implement new SLI4 doorbell register Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.18: Add support of received ELS commandsJames Smart2010-10-251-0/+41
| | | | | | | | | | | | Add support of received ELS commands - Add support for received RLS ELS command - Add support for received ECHO ELS command - Add support for received RTV ELS command Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] lpfc 8.3.17: SLI Additions and FixesJames Smart2010-10-081-1/+5
| | | | | | | | | | | | | | | | - Added driver support for management application to pass down two security specific mailbox commands (MBX_SECURITY_MGMT and MBX_AUTH_PORT) - Added driver support for handling FIPS zeroization trap of host ERATT ER8, performing selective reset and bringing the device up. - Added code to detect INIT_LINK mailbox command completion returning status MBXERR_SEC_NO_PERMISSION. - Increased the wait timeout on host status register HS_FFRDY and HS_MBRDY being set. - Remove the port offline code from the Heartbeat TMO handler. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 13:35:13 +0100